Hello, I something serious. During the upgrade my qtek 9000 to WM6, I inadvertently unplugged the USB cable. Since QTEK does nothing, not even the bootloader. Doctor then? please, do not tell me that my qtek 9000 is dead or I will hang
PS :
we need to know before I made upgrades Roma radio and extrom without worries. we must also know that I have never upgraded the bootloader The simptomes:
1 - When I met bootloader mode, it displays the menu "press 0 to restore ...", and there if I type" 0 " or "x", Qtek does nothing more (off screen)
2 - This is not because batteries, I have tested with 3 batteries full.
3 - The software mtty does not detect Qtek, even with USB connection Activsync disabled.
4 - Do you think it is possible to upgrade the Bootloader? If someone knows where I can buy a motherboard for my Qtek 9000? ..
dreeck said:
Hello, I something serious. During the upgrade my qtek 9000 to WM6, I inadvertently unplugged the USB cable. Since QTEK does nothing, not even the bootloader. Doctor then? please, do not tell me that my qtek 9000 is dead or I will hang
Click to expand...
Click to collapse
Don´tgive it as dead!, first READ the Wiki
Hope you get sollution
thank you to answer me
I read everything and I think that if mtty can not pick my qtek, it is bricked .
Actuellmeent I seek a motherboard not very expensive because my qtek is in good condition.
someone could give me sell a motherboard improved with 128 MB?
dreeck said:
someone could give me sell a motherboard improved with 128 MB?
Click to expand...
Click to collapse
Check here: http://forum.xda-developers.com/showthread.php?t=370480
Maybe some of the stores named there can sell you a motherboard
Good luck mate and keep trying with UNI. The best mobile ever (At least till today)
Related
Yes.. i was not aware of the number, only wen it vent wrong i saw that.
The only information on the qtek 9090 is "serial v2.60"
- Nothing wil it react on, soft reset, hard reset, any combination of the buttons
I have tryed to telnet to the device, and the only responce it came with is "Q995" ( as i remember) no matter what i wrote to the device, that was the only anser.
- So ... don't do that home :lol:
I have now contacted the firm that i have bought it from, and the say "bummer - send it back to os"
- and thats wat i have to do tomorrow.
Well.
Now for a month ago i sendt my qtek 9090 return to the company that i bought it from.
They have repaired it, and i got my own phone in my hand now.
The fee that i must give is €84 and - i think it was ok, so i payed the company and went home...
Next time i upgrade the firmware i will be more concerned.. if ever
Thats the end of this story.
/Nmouse
Bought an XDA IIs on Ebay with a broken screen with the intention of swapping my screen from my imate pda2k evdo to the xda iis. Unit arrives but is totally unserviceable stuffed case etc. Seller exchanged unit for a mint condition one with a good screen but showing all white when turned on. Tried exchanging screens but no improvement.
Unit will synch up to computer with activesynch.
I have tried all the hard/soft/bootloader resets with no change in operation.
I have tried mtty1.42 but cnnot get to the wceusbsh001 stage.
Any suggestions?
Try flashing it with a official rom. I had the same problem with my BA two days ago when I cooked a rom and forgot to check for free space, so the rom was too big and when I booted I got the white screen.
The solution was to cook another rom with basic nothing on it, flash and ta-da! Back to business
Tried to do a rom update from o2 Asia for Australia.
It would not give me a download for its imea number so I used the download for an older xda iis that I had.
Got the following error
error 100 model ID error 25 N 10 10 10
When it listed the version information my unit showed
1.40.00
1.12.00
with no extended image information in between.
Where to from here do you suggest?
I have replaced the BAupgradeut with the MAupgradeUT.
On the first try it came up with model error again.
I then started the process again It showed no device information at all for CE, Extended or Radio and it did a full three stage upgrade.
However the WSOD still continues. I can still explore the device through activesynch/explorer.
If I try to do another upgrade to check the device info it does not register an extended rom version on the device information screen as it was before the upgrade.
Any suggestions
craigjackaroo said:
Bought an XDA IIs on Ebay with a broken screen with the intention of swapping my screen from my imate pda2k evdo to the xda iis. Unit arrives but is totally unserviceable stuffed case etc. Seller exchanged unit for a mint condition one with a good screen but showing all white when turned on. Tried exchanging screens but no improvement.
Unit will synch up to computer with activesynch.
I have tried all the hard/soft/bootloader resets with no change in operation.
I have tried mtty1.42 but cnnot get to the wceusbsh001 stage.
Any suggestions?
Click to expand...
Click to collapse
Hi craigjackaroo,
I've the same problem (WSOD) mounting a new cover on my i-mate pda2k!!!
Did you solve this terriful problem?
Fmulas AT iol.it
Hello, I am new to this site and the whole BA experience. I got my sx66 about a week ago and decided to upgrade the ROM to 1.33.51. Yes, from what I've gathered from reading it is also a little out of date, but I was trying to start out small. Well, at some point things went terribly wrong, everything seemed to be well, when all of a sudden my screen went blank and I was left with a screen that just says serial at the top and v 2.07 at the bottom. I have left the battery off for about 20 hours now, waitting on the backup battery to die(from what I understand my phone may be stuck in bootloader mode and this should fix it) Well, I just got home from work and the phone still says the same thing if I put the battery on. Any help or suggestion would be appreciated or even just a "Hey, your phones gone" would be as well, just curious to know what to do. Thanks!
Problem with Qtek 9090
Hi, I have a qtek 9090 and only work with USB o AC connection! Don´t work with the battery! the battery is new! and the phone work fine!!!! only don´t work with the battery! Help Please!
After trying all types of tricks, I am still unable to get my USB port on the Artemis to do anything but charge the phone. I am dying to stick a Tom_codon firmware on the thing but without a USB port I am pretty much dead in the water. Anyone have any experience with PPC Techs repair service? They seem like they are pretty fast at turnaround time. I am curious how much a mini-USB port repair might cost. Don't they just open the case, de-solder old port, solder in a new one, close it and run some diagnostics or does it go deeper than that?
Any experience or pricing info for this type of repair would be appreciated. Thanks!
Really wish we had some news on the HTC Polaris...might be vaporware!
Dubhead
No one has ever used PPC Techs??
Looks like everyone has a perfectly functional Artemis all the time?! I would love to get mine repaired if it is worthwhile, especially since the WM6 upgrade is out from HTC. Anyways, please weigh in with your thoughts/experiences in getting a repair done either from PPC Techs or HTC themselves. Thanks!
~Dubhead~
Hi,
my Problem is exactly the same. But I cant send it to t-mobile because i've flashed an WM6 for O2 and without USB I can't update to the original German T-Mobile ROM.
Greetings
Ali
I had a minor probelm with the USB connector where the headphones would crack and splutter on playback.
I used some good contact cleaner and it seems to have done the trick.
Aligator said:
Hi,
my Problem is exactly the same. But I cant send it to t-mobile because i've flashed an WM6 for O2 and without USB I can't update to the original German T-Mobile ROM.
Greetings
Ali
Click to expand...
Click to collapse
if your device is CID-Unlocked you can flash any rom with micro-sd-card and bootloader. go to wiki
edit:
here the link to wiki: Artemis SD Card Flashing
hello and merry xmas!i have a qtek 9000 and all of a sudden some days ago while having it in my pocket my lcd broke.i found some lcds in the ebay for about 130 dollars(90 euros) and as i m from greece i searched in greek forums and found a qtek with a broken m/b(something happened and the m/b "burned, toasted" from humidity etc) and the qtec doesnt turn on.he is selling it for 40 euros.i want to ask if there is a possibility and the screen to have a problem from the "burned" motherboard.i dont want to waste these money.thnx a lot for ur time
it's hard to say if the deadmobo mean damaged lcd too depend on how it died i guess
and unless it's 100% the same model you cant be sure it will work
well he has a qtek 9000 and i have a qtec 9000 so it will match.well ill take the risk about being good or not the screen