a question about broken lcd...more or less - General Accessories

hello and merry xmas!i have a qtek 9000 and all of a sudden some days ago while having it in my pocket my lcd broke.i found some lcds in the ebay for about 130 dollars(90 euros) and as i m from greece i searched in greek forums and found a qtek with a broken m/b(something happened and the m/b "burned, toasted" from humidity etc) and the qtec doesnt turn on.he is selling it for 40 euros.i want to ask if there is a possibility and the screen to have a problem from the "burned" motherboard.i dont want to waste these money.thnx a lot for ur time

it's hard to say if the deadmobo mean damaged lcd too depend on how it died i guess
and unless it's 100% the same model you cant be sure it will work

well he has a qtek 9000 and i have a qtec 9000 so it will match.well ill take the risk about being good or not the screen

Related

updated a qtek 9090 with qtek 2020 software!?

Yes.. i was not aware of the number, only wen it vent wrong i saw that.
The only information on the qtek 9090 is "serial v2.60"
- Nothing wil it react on, soft reset, hard reset, any combination of the buttons
I have tryed to telnet to the device, and the only responce it came with is "Q995" ( as i remember) no matter what i wrote to the device, that was the only anser.
- So ... don't do that home :lol:
I have now contacted the firm that i have bought it from, and the say "bummer - send it back to os"
- and thats wat i have to do tomorrow.
Well.
Now for a month ago i sendt my qtek 9090 return to the company that i bought it from.
They have repaired it, and i got my own phone in my hand now.
The fee that i must give is €84 and - i think it was ok, so i payed the company and went home...
Next time i upgrade the firmware i will be more concerned.. if ever
Thats the end of this story.
/Nmouse

Returning my SECOND XDA IIs.

Well, tomorrow I will go down to Accord HK (Hong Kong Service agent) and return by SECOND XDA IIs. This will be about my 8th visit to Accord in the three months of owning a IIs.
The first model had its internal microphone replaced three times before I simply got fed up and asked for a replacement.
Now, the replacement has a defect. Everytime I remove the Sim card, the unit HARD resets! Its ridiculous.
I really dont know what to do now. People still complain they cant hear me properly (with the old AND replacement unit), and now the hard reset issue is just too much to handle. I think I will ask them for a Mini and refund me the balance money?
What do you guys with the IIs think? Am I just expecting too much?
Not sure if this is a defect.
If I remove the battery from my XDAII for just a few seconds, my unit also hard-resets.
That's why I never never take the battery out anymore.
Cheers
Pat
Hi.
I would say that this is a defect/bug on the BA.
Several people have the same issue when battery is removed.
I don't have this issue.
I can remove the battery with the Device turned on, or turned off. No loss of data.
this is certainly a defect. The IIs has a backup battery specifically for this reason. My first (now returned) unit didnt have this problem. IIs users know about this of course.
I just wonder how everyone is living with the low sound problem...
EXcuse me but Jam sucks , i think XDa2 is the way to go 8)

AaAaAaRgGgGhHhH !!can anyone solve diz screen Prob ??

2 days ago i drop my o2 atom near my bed and it's fall to the floor and i broke it's screen(but not the LCD)..it make me very upset..but the LCD still working and did't broke event a single pieces !!only the LCD cover that broke is it can be buy separate??if anyone know where we can buy it from internet i'll be so glad !!if anyone have the answer please contant me: [email protected]
cause i'm indonesian..so i still don't know o2 atom very well,cause you know what indonesia got bout o2 right..so yesterday..
1 more problem bout the software..
why i can only watch a few video in my o2 atom..but when i see the format in my computer the format are all the same..did anyone know how to solve dad?

My qtek 9000 is he dead?

Hello, I something serious. During the upgrade my qtek 9000 to WM6, I inadvertently unplugged the USB cable. Since QTEK does nothing, not even the bootloader. Doctor then? please, do not tell me that my qtek 9000 is dead or I will hang
PS :
we need to know before I made upgrades Roma radio and extrom without worries. we must also know that I have never upgraded the bootloader The simptomes:
1 - When I met bootloader mode, it displays the menu "press 0 to restore ...", and there if I type" 0 " or "x", Qtek does nothing more (off screen)
2 - This is not because batteries, I have tested with 3 batteries full.
3 - The software mtty does not detect Qtek, even with USB connection Activsync disabled.
4 - Do you think it is possible to upgrade the Bootloader? If someone knows where I can buy a motherboard for my Qtek 9000? ..
dreeck said:
Hello, I something serious. During the upgrade my qtek 9000 to WM6, I inadvertently unplugged the USB cable. Since QTEK does nothing, not even the bootloader. Doctor then? please, do not tell me that my qtek 9000 is dead or I will hang
Click to expand...
Click to collapse
Don´tgive it as dead!, first READ the Wiki
Hope you get sollution
thank you to answer me
I read everything and I think that if mtty can not pick my qtek, it is bricked .
Actuellmeent I seek a motherboard not very expensive because my qtek is in good condition.
someone could give me sell a motherboard improved with 128 MB?
dreeck said:
someone could give me sell a motherboard improved with 128 MB?
Click to expand...
Click to collapse
Check here: http://forum.xda-developers.com/showthread.php?t=370480
Maybe some of the stores named there can sell you a motherboard
Good luck mate and keep trying with UNI. The best mobile ever (At least till today)

Qtek 9090 screen model?

am not god at this forum type of thing so stick with me
ive broken my screen and i am wondering what i would need to do to get a replacement
(edit) the screen is still giveing me full visual desplay but its cracked in two places and only 1/3 of the touch still works (edit)
ive spent a couple of days seaching on and around ebay but it seems thairs different models of screen and maby the posablity that i dont have to buy the whole screen unit just part of it
if anyone could give me any advice on what model i need or if i can just buy the glass unit
i dont have a clue how touch screen technolegy works so i dont understand what anything does
i have an engineer who is willing to do fit it for me but only when i have all the parts and stuff
al wrte down asmuch infomation as i can but i don have a clue about wair the phone ifs from cos i got it from ebay
after looking in the device info on the phone
model No PH20B
in the back of the phone under the battery
S/N HT513D608071
i dont know my board number and i dont have a clue about how to find it out
i dont realy wana go takeing my phone apart cos am not 100% confident with doing it
so any help would be awsum guys/gals
aswell if anyone has any idea of a ballpark price for sutch an item please let me know
Did you've searched in ebay? There are a lot offers for replacement displays for VPA III/XPD III/VPA III. They all should be compatible.

Categories

Resources