Develop Bugs

Problem uprading with HTC TyTn official ROM PLS HELP

Hello to everyone in xda-developers. Thank you guys for existing!
I have a problem uprading my HTC TyTN to official ROM version HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108.exe. Im a complete noob and have never flashed my pda before. My eyes burned from reading the forums for 4 days now. Basicaly what my problem is:
I've downloaded the RUU and I run it on my Pc (XP, Active Synk 4.5), connect the pda and when the device goes in to bootloader the active sync looses connection, so the RUU doesnt show my current rom version. The active synk is disconnected all the time. I press update, the progress bar shows on Pc and Pda, it goes to 1%, it stops giving me invalid vender id error and restarts PDA. I tried a different approach - i run the RUU, and on the page where is says "make sure that the active sync is connected" I connect the Pda. Active sync is connected then and I go to the update page and now it shows my rom version. I click update and the screen of the Pda goes dark, and in a while I get the connection error. I'm I doing something wrong?
I red almost everything several times, and I cant do it. I feel like a dumbass Can someone tell me if it's possible that my device is CidLocked, because the OS is in English, and when I go to the HTC e-club cite, it allows me only to download German version ROM? Do I have to try to CID unlock using AUTO_Unlock_v3a.bat and install HARDSPL7 before installing that ROM? Will I be able to install official ROM's if I do?
Thanks to all the addicts that will help. I promisse to learn fast!

HTC support
I also wrote to HTC online support - they haven't replied for several days now. Some support...

Hello, correct you do need to learn a bit more before proceding down this avenue im afraid From what ive read definatly DO NOT attempt to CID unlock the device....there is no need anyway.
First give us the following information:
What brand of Hermes do you have? Orange, Tmobile etc...
What language is the device in??
Where are you running the device??
What do you want to do??
You ARE a noobie....but thats not a bad thing....we all were at one stage so the best thing you can do is to give us that information and I will attempt to point you in the right direction.

Hello MrVanx
Hi MrVanx,
my admirations, I know I'm talking to a guru here, I red many of your guides. I can not say I understood much, but got a basic picture of things.
I will not attempt to CID Unlock the device as you suggested.
I think the PDA is genuine HTC TyTN. On the front side its only written HTC, behind the battery HERM200. I will upload an image, so you can see for yourself. The device is in English, but when I log in to HTC e-club, the only available rom for me is German. Maybe the PDA is imported in Bulgaria from Germany.
I'm using the Pda in Bulgaria (East Europe), the carrier is Globul.
What I want to do with the device is to upgrade it to a newer version of windows. I would like also to try some of the cooked roms but I don't feel quite so confident in my flashing skills - I actualy think I don't have any skills yet I really like the black today screen of LVSW WM6, can this be better for me than the official HTC WM6 ROM? Will I be able to upgrade to HTC WM6 official ROM and if I don't like it to go to LVSW?
Thanks for helping MrVanx. I couldn't think of a more appropriate person.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Check your PMs

[HELP] Dead iPAQ hx2110

Somebody please help me, i was trying to upgrade my hx2110 from WM2003SE to WM6,yeah it was my fault..i didn't follow the instruction very well... i was stupid, upgrading using SP29xxxx(2003 Update ROM from HP) then swap the NBF Files...upgrade complete, and now He's dead.. Pre-BL still works, but i have no luck to reflash, HPRUU flashing stop at 0.1% and it says "Congratulation...blaa..blaa" but nothing happened to my hx2110..i used to read the step to unbrick hx2110, but i don't have another iPAQ hx2000 series to do the trick..is there any other way to un-brick my iPAQ ? please help...sorry for my bad english...

well, you are sure that you are setting it into pre-bl the way you are supposed to? (it will say USB in the bottom left corner, not usb is connected) and you have deleted the whole ipaq folder off of your hard drive and (C:/ipaq) and run that service pack again right?
Your english is fine, let's try to get your device online again.

Yes, i pressed Calendar button to activate USB Mode, not USB Connected..but, still it doesn't fix the problem..
Your english is fine, let's try to get your device online again happy to hear that, thanks contradude...

sorry for being afk right now but I'm out and about (im posting this from my treo). you should take a look at the chrismrulz bootloader. its supposed to help when nothing else can. I'm surprised that the pre-bl isn't helping you fix you problem.
edit: i'll take a look tonight and see what I can do about helping you get your device up. if anyone else has any ideas, feel free to post
edit 2: I took a look around for ideas and the only one that still seems viable is grabbing another ipaq (either borrowing one from a friend or paying $10-40 on ebay and getting one you can hold onto for parts). good luck with your pda and next time don't let your excitement get in the way of methodically reading and executing the instructions. I would offer to lend my 2495 but I'm in orlando, florida usa

Wow...that's so far, shipping cost maybe will be equal to used iPAQ here...hehehe.. Thank's for your offer contradude...i really appreciate that..
Well, now i would like to show some screenshot :
Flash using SP29865 from HP :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It doen't detect Model ID and ROM but, this HPRUU allow me to flash...
The Process stops at 0.1% but, the flasher lies to me it said "Congratulation..bla..bla..bla"
and this is what happened if i'm using another ROM files such as SP33303,4PDA.RU ROM,and the others...
Wrong Language, Not Connected to ActiveSync,etc.
hmm...trying to borrow another hx2000 series, but who? almost everyone in my country using PDAPhone, rarely uses PDAOnly..any plan to sell it Mr.Contra? or maybe you'll send it to me as a birthday present ? hehehe... just kidding...This is the first time i'm using Windows Mobile Based PDA's very love it..but i killed it...
Too Much love will kill you...

oxzoned said:
Somebody please help me, i was trying to upgrade my hx2110 from WM2003SE to WM6,yeah it was my fault..i didn't follow the instruction very well... i was stupid, upgrading using SP29xxxx(2003 Update ROM from HP) then swap the NBF Files...upgrade complete, and now He's dead.. Pre-BL still works, but i have no luck to reflash, HPRUU flashing stop at 0.1% and it says "Congratulation...blaa..blaa" but nothing happened to my hx2110..i used to read the step to unbrick hx2110, but i don't have another iPAQ hx2000 series to do the trick..is there any other way to un-brick my iPAQ ? please help...sorry for my bad english...
Click to expand...
Click to collapse
See if the info. in the following links are helpful
http://forum.xda-developers.com/showthread.php?t=372799

Thanks hkksl..One more question, is it possible to Flash dead iPAQ using mtty / putty ? or maybe from SD/CF Cards ?if it possible, how? is there any tutorial links ? thanks in advance..
Edit :
Last nite i dream my device running WM6..Unfortunately, i was just a dream

is it possible to use this (HTC Wizard) tutorial to flash using mtty ?
http://forum.xda-developers.com/showthread.php?t=276963

i always run all of my updates from 'white screen bootloader' aka pre-bl. hmm... that's a very interesting screenshot. is it charging the battery still when you plug it into the dock... also make sure that after it says pre-bl and you put it in the cradle that you hit the calendar button so that it goes from usb is connected to usb. also, do you have a power adapter hooked up to your dock or are you trying to do it just over USB?
as far as trying mtty, if you want to try it in a really easy form try chrismrulz' bootloader. here is the download link for it. it prepares your rom and then uses mtty to upload to your device. make sure to turn off activesync on your computer (right click on the greyed-out icon and go to options and deactivate almost all of them). then you take that, plus your original firmware rom and put it on a folder on your hard drive with no spaces in the path (i put mine in C:/bootloader). you then run bootloader.exe and just let it do it's thing. I don't click on any of the pop-ups, other than to show it where the rom is. I hope this works for you

Thank's for the reply contradude, first of all i would like flash mine with SP29795.exe (the old ROM 2003SE) if it doesn't work..then i'll try Chris Bootloader ( even tries many times but nothing happened,maybe i didn't follow the instruction well )
I'll report soon, wheter it works or not...right now, i'm not confident with my english

WOOOOHOOOOOO!!!! I've made it, now my hx2110 running WM6 4PDA Version!!! Here's the step :
1.) Download SP29795.EXE from :
Code:
ftp://ftp.compaq.com/pub/softpaq/sp29501-30000/SP29795.exe
2.) Flash it using SP2975 RUU, it will flash your bricked iPAQ into WM2003SE 1.00.14
3.) Oops, flash completed..but some error has been occured..it won't enter WM2003SE
4.) Don't panic, reflash your iPAQ using SP29795 RUU, but swap the NBF From SP29865.exe
Code:
ftp://ftp.compaq.com/pub/softpaq/sp29501-30000/SP29865.exe
5.) Start flashing, after finished..voila! WM2003SE 1.10.09 should works..
6.) Now, flash your iPAQ to 1.00.00L then 1.00.00H after that go to WM6... ( see copenhagen tutorial from http://forum.xda-developers.com/showpost.php?p=1516882&postcount=66 )
7.Finished
I Would like to say thanks to Contradude, hkksl, copenhagen, Yurrix, and to everyone who made this possible.... THANKS!!!

after upgrading, Xda Exec won't work !

Hello there ,
i got a problem since 3 months ago and i still cannot do anything , i have been searching about any solution but i can't get through with anyone.
my mobile is : Xda Exec
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
after the upgrading with different type of mobile Rom , the mobile was unable to turn on . i just see the black screen without anything .. i try to restart it but still black screen .. when i try to connect it via USB my Windows wouldn't recognize the mobile ..
is there any help please??
i try to download the original ROM from the o2 website but the link is die and o2 doesn't support xda exec anymore ..
http://xda.o2.co.uk/xdaExecSoftware.aspx
also
http://xda.o2.co.uk/devices/xda_exec.jsp
thanks in advance
CFIL

have you tried to boot into bootloader mode and reflash an o2 rom from there?
(can be found on the ftp )

what do you mean by bootloader mode , if you mean to press the two butoons to format the phone and install new one , then yes i tried it many times but nothings comes in the screen just black screen and sometime i have seen a version number like v1.0 ..
do you have the original ROM from the o2 via ftp ? post it please ..
thanks.
CFIL

You should take a kook at the wiki. There's a link at the top of the page.
Bootloader mode is accessed by pressing backlight, power and reset and there is no backlight, so take a close look...

EvilJogga i did that many times but nothings change just black screen with above USB written and bellow v2.10 .. just like this ..
is there any help ?!
thanks in advance..
CFIL

that is bootloader mode..
means you can reflash etc.

Thanks kingsizeriz for the help...
How can I reflash or install new ROM that can my mobile work again..
Also when I connect it to my pc the Activesyns doesn't see my mobile.
CFIL

did you CID unlock your device?
if so then i suggest installing ranjus v7.4 or similar if not get the original o2 rom from the ftp and extract it, in there it will have the application to run
it wont try to flash unless it can recognise the device so have a play around
i had to replace all the original flashing utilities with the "unsafe" MaUpgradeUt_noID.exe
as mine kept failing with the other :S
however i got your problem once, edited ranjus to include that utility and run it.
if that made sense?

Hi kingsizeriz ,My mobile is Unlooked ,I understood everything and I will try to do it ..
But I don't know from where can get the original o2 rom .. Do you have it please?
i try to search for it in the o2 website but all links are die .which are HTTP not ftp..
Thanks.
CFIL

all o2 links are dead
and they are not currently on xda-devs ftp (my mistake)
http://www.buzzdev.net/downloads.php?category=44
sign up there and download
you may need to download the launch rom then the update
im not to sure though.

Thank you kingsizeriz ,, its very useful . I will try to fix it and I wish my mobile come to live again..
Thanks man
CFIL

let me know how it goes

i installed the original ROM , when I finish the ROM processer said i have to disconnect from usb then open it ... I have been try it many times I got a message on my mobile with white screen and black written said "
press 0 to restore
factory default
press x to exit "
When I press 0 or x it comes screen with different color such as red, black and green. I have been waiting up to 30 mints put nothing change.
I tried it many times with different preening from 0 to x but still the same.
I thought I have to install the upgrade when i connect to the pc it didn't recognize the mobile.
I am sorry to bothering you guys.
best regards.
CFIL

what utility did you use to boot?
and leave the screen open whilst booting (it shows a percentage on the screen )
and press 0 when it prompts that

Hi kingsizeriz , i used the O2 Xda Exec Launch ROM v113139 ROM.
I did as you said, but i didn't see the percentage on my screen. I was waiting for the restore then I pressed 0 but nothing change. Then I wafting now for 1 day and the mobile in the charger but nothing change just screen with mixed colors
Best regards.
CFIL

if you CID unlocked your device try flashing ranjus v7.4 and see if that works?

[NEW] WM6.1 For Ultimate 6150 & 8150

Hi.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
New ROMs WM6.1 for Ultimate x150 ..
Download 6150
Here
Download 8150
Here
Other Lang
https://www.imate.com/st-WindowsMobile6_1.aspx
C U

Disappointing WM6.1 ROM Upgrade for 6150 & 8150
Performance is better now
EXCEPT it DOESN'T support SDHC still!
MAX is still 2gb microSD for this 2 devices

and stability is not good - many soft resets when using wm6.1.
by the way did anyone of you guys manage to extract the rom file? i dont know where the setup program decompress it so i can have the rom and give it to the chefs to cook.

6150 hang problem
Dear Members
i have a ultimate 6150 i have tryied to upgrade it to wm6.1 but now it open and hang in I-Mate logo only and when i tryied to make the hard reset or soft reset it give me eb or cb on the screen only so what can i do plz rellay i have a big problem so help me and also it cant syncronize now it give me the port of the modem only
thks in advance and waiting your reply

try running the rom update again or do a hardreset if this doesnt help i will send you a sd upgrateable rom to flash it from the sd not using windows.

thanx all 4 posts
I need Extend ROM 6.1 for Ultimat 6150 . some one have it?

liomojo said:
try running the rom update again or do a hardreset if this doesnt help i will send you a sd upgrateable rom to flash it from the sd not using windows.
Click to expand...
Click to collapse
Sorry for my late reply but really i try to get a solution so if you have a solution plz give it to me and i dont know if i can make my e-mail here or no but my e-mail is [email protected] thks in advance and waiting you really replyand by the way plz give me the way to flash it because my 6150 hang only in ultimate logo only thks

plz can you send me the sd upgrateable rom please
[email protected]

If it'll help s/body: english ROM 6.1 here. Good luck.

arabic rom please
arabic rom please...
br,
parot

Hams art said:
Hi.
New ROMs WM6.1 for Ultimate x150 ..
Download 6150
Here
Download 8150
Here
Other Lang
https://www.imate.com/st-WindowsMobile6_1.aspx
C U
Click to expand...
Click to collapse
Can someone please help me? I have the 8150 ultimate and when i try to install the wm6.1 in the insert ROM lock code window i have a little problem. It said that the ROM code is incorect but i inserted the ROM from the case of my PDA. I`ve registered to the imate webside and all it said to do.
PLS HELP ME!

Spanisch Rom
Please spanish ROM.s 6.1 for Ultimate 6150 ?
Thank you very much.
Por favor si alguien sabe donde encuentro, ROM.s de WM 6.1 para mi Ultimate 6150, o Portugues que creo mas dificil aun.
Muchas gracias por la información.
Claudio.

I registered on imate.com but ROM lock not available. How I can receive it?

hi everybody
iam using ultimate 8150, my box was lost when i prepared to change house, now i dont know Rom lock code to upgrade to wm6.1. The website Imate isn't alive, how can i have rom lock code? please help me!
thanks a lot!

lhduongolala said:
hi everybody
iam using ultimate 8150, my box was lost when i prepared to change house, now i dont know Rom lock code to upgrade to wm6.1. The website Imate isn't alive, how can i have rom lock code? please help me!
thanks a lot!
Click to expand...
Click to collapse
Same problem.. Any ideas???

I have the same problem, but for an Ultimate 6150. Help?!

can exist italian rom of v6.1?

problem in SIM
I have Imate Ultimate 6150 and it cant read the SIM ?!
__________________
__________________

HELP ME......the attach screenshots might i dentify the problem
anyways in detail....SIM is not working, Wireless manger sometime hans up, most of the time i cant see the dial pad (but when i do...it says "Unknown SIM Erroronly emergeny calls can be made without a PIN")
the good thing about it is...IGET THIS ERROR EVEN WITHOUT A SIM
so any one able to sort this out...all th infos are given in the screen shots
The Phone is Ultimate 8150,
ive been after this for like a year PLEASE NEED HELP...1 more thing the best site so far i found rearding Imate Ultimate Series is closed down ultimates.biz...so you guys are the last hope...

i-mate ultimate 8150 rom english 6.1 or 6.0 help
the official web is closed and i need the rom for my mobile becose my OS not view wifi, and bluetooh hardware, please help me.

HTC P3300 WM6 to 6.5

hey Guys
i have a Problem
on my P3300 is wm6 Professional installed and i will wm 6.5
i have downloaded this file http://forum.xda-developers.com/showthread.php?t=513732
and i started the ROMUpdateUtility but they came a Error:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and on the phone
pleace help me my english is very bad

hi 'Murat' (careful about giving away personal information when posting screenshots of your desktop)
search the forum for error 260
it's probably because you're using vista, although the screen that comes up and says to close other programs before flashing probably means INCLUDING Windows Media Player and whatever that MACOS-dock type taskbar addon is
Especially media player because it can try to make a connection with your phone as a 'removable storage' device
once you get that coloured screen up on your phone , it means your device is in bootloader mode
you can try to run the update again once the phone is already in that state and it might fix it.
if not, as i said, search the forum ... you might need to change your device drivers
it also looks like you havent USPL'd your phone yet so this ROM might not flash correctly.
Again, search the forum
this might also be a good time to point out theat there is also a v44 version of that rom on here, rather than the v43 you're trying to use

d-signet said:
search the forum for error 260
it's probably because you're using vista
once you get that coloured screen up, it means your device is in bootloader mode
you can try to run the update again once the phone is in that state and it might fix it.
if not, as i said, search the forum
it also looks like you havent USPL'd your phone yet so this ROM might not flash correctly.
Again, search the forum
Click to expand...
Click to collapse
sorry my english is very bad
can i flash this ROM on my Device??
i cant find error 260 in the forum. can you pleace help me for this problem i will wm6.5 on my device an touch flo
PLEACE HELP ME
yes i have vista 32-bit

Hi,
good idea for the phone screen but we can't read the numbers so you can just give them. i think SPL 3.13.0000 so you haven't Unlock your device.
1- Unlock your device http://forum.xda-developers.com/showthread.php?t=311403
2- if it's good, your numbers on bootloader (screen 3 colors) have changed normally in 1.11.xxx
3- you can now flash your device with your wm6.5 rom.
And yes use search for help you if always problem.

IPL 3.13.0001
SPL 3.13.0000
thx
i unlock my phone

hy
i will unlock my device but the dos window is 100% complete and he came the error 260
im a noob

Which program do you use for connect your device to vista?

Active Sync and vista not compatible
i have no programm
i have the connect the device on my pc per USB and my pc has find the phone for windows mobile device

ok try this soft for synchron device to PC
http://www.commentcamarche.net/faq/sujet-5337-activesync-et-windows-vista

i have no programm
what for a program i install for this phone??

look the link 2 post before.
Sorry i have big lag and it's very long for edit

ok thanks wait pleace

i flash mine with vista no problem using the default WMDC connection
have you tried putting the phone into bootloader mode first and THEN flashing?
also search the forum for' error 260 vista drivers' ... you might need to rollback the USB driver to an earlier version but try everything else first.
USPL should be done first before rom flash

d-signet said:
i flash mine with vista no problem using the default WMDC connection
have you tried putting the phone into bootloader mode first and THEN flashing?
also search the forum for' error 260 vista drivers' ... you might need to rollback the USB driver to an earlier version but try everything else first.
USPL should be done first before rom flash
Click to expand...
Click to collapse
hy
i will in the bootloader mode
how i make
sry my english

sorry, I don't think i understand your question
to put your phone into bootloader mode, hold the RECORD/NOTES button and press the stylus into the reset hole at the same time.
Then you get the coloured stripes screen like your screenshot (that is bootloader mode)
First you need to USPL your phone. This makes SPL version 1.11.0000
Don't upgrade the rom until you can see :
SPL 1.11.0000
when you reset
search the forum for help or follow the link earlier

hy
i installed windows mobile device center and have connect my phone with my pc its OK
but
i will install the unlock "DOS Window 100%---------his open automatic ROMUpdateUtility and my P3300 have a white screen and is not more connected with the WMDC"
i pushed the Reset Button
pleace help
i search 1 week for this problem
pleace GUYS

hy thanks for you help
i cant find the RECORD/NOTES button
can you pleace help me
sry but my english ist very very bad

Try to run the "start_uspl" from Artemis_USPL but i think you must:
1 instal the program for synchron with vista,
2 connect your device but not in bootloader, you must see the today screen on your device.
3 only when synchron is finished you can run the "start_uspl" for unlock your device.
4 if there is no error and when the process is finished, normally he ask for restart device, and look if the numbers 3.13 is change in 1.11
Edit if there is an error (white screen, etc) try to run the "start_uspl" again and again. It will finish by working, i had to try many times before it really working.

but when the prozess finished "dos window 100%" my phone display is white an the connection to the PC is deactive

hy LeTo08
i have testing you TUTORIAL but this not completly
here the pictures
HELP