I updated my rom from the original spanish version to a Artemis_Touch_3.01
After some use, the device is blocked.
It starts the HArd reset, after "Format messages" It starts HTC white screen
IPL 3.13.0001
SPL 3.13.0000
and nothing more
.
It also works ROM update mode (Three colors screen) but when I execute the Rom update frommy pc, it reaches 2/3% and gives different Errors depending the ROM,
"Ivalid Vender ID [294] when I use the ROM HTC_P3300_SPA_3.13.412.1_4.1.13.44_02.94.90_Ship_R
ERROR [270]: Update Error -The Image File is corrupted - When I use Black & Blue 4.3 or Artemis_Touch_3.01
I need help!!!
you need to flash your mobile with the original rom from your provider (spanish one's).
The thing is Im not sure which was the original version that was installed,
I tried with this one and didnt work
Ivalid Vender ID [294] when I use the ROM HTC_P3300_SPA_3.13.412.1_4.1.13.44_02.94.90_Ship_R
how can I know which rom I have to use?
Aquí tienes la oficial de Movistar que te servirá para arreglar tu HTC...
http://member.htc.com/ruudownload/Telefonica/TelefonicaWM6Step1.aspx
Un saludo
This is the oficial movistar ROM...
http://member.htc.com/ruudownload/Telefonica/TelefonicaWM6Step1.aspx
Uploaded the OFFICIAL WM6 MOVISTAR in RPSHARE
Hello all
In order to make easier the download process I have upload the file in Rapidshare, through this way you do not have to enter your Telefonica Serial Number .
http://rapidshare.com/files/7872213...A_3.15.621.1_4.1.13.50_03.06.90_Ship.exe.html
Best Regard.
It still doesn't work
when It reaches 2% it gives
ERROR Invalid Vender ID [294]
Coul be an issue with the ttery that has no charge? and I cant charge it?
martingzm said:
IPL 3.13.0001
SPL 3.13.0000
Click to expand...
Click to collapse
Sounds like you forgot to use USPL first. Read the sticky at the top of the Artemis forum.
cr0bar said:
Sounds like you forgot to use USPL first. Read the sticky at the top of the Artemis forum.
Click to expand...
Click to collapse
If phone bricked can't run USPL at all.Because USPL just work in Active Sync PPC to PC
Correct, and if you don't find the original ROM, no way for you to unbrick the mobile...
You should be able to use imei-check's unlocker though right? This will remove the super-cid and allow you to flash any carrier's rom.
I contacted with the repair service and now I know which is the original version Installed in my artemis
Imagen Software: 3.13.412.1
Imagen Extendida: 4.1.13.44
Imagen Radio: 02.94.90
If anyone have them, please send me the link...
Think i need that file to, same issue pls hilfe
Related
I have a xda2i and i downloaded the custom rom XDA-developers-SER-v12
and all i get is 2 error messege popups and i get it every time i try.. i even changed the usb device and 2 cradles.. if anyone has any advice i would be greatfull... also trying to unlock my xda2i its a great device just wish it was a great phone too.
Acid... also have included screen shots of the errors
Are you sure, that you have a XDA IIi? These ROM is just for the Wallaby (XDA I) device (Modell PW10).
If you have a Wallaby device, than your installed ROM prohibit flashing via EXE. You have to use SD-Card-flashing via Bootloader.....
Search the Forum and/or wiki, how to do this....
Stefan
hi!! you know if SER v1.2 run on Kaiser (TyTN II)? i try to install this on my htc but i get it error:
ERROR: GetDeviceData - No se puede encontrar el m¾dulo especificado.
error getting devicedata
this is a missing dll? you know if SER use a runtime DLL?
Hi,
I am trying to flash my dutch T-Mobile MDA-pro with a none T-Mobile ROM. I am using the tool MaUpgradeUt_noID.exe to do the flash. The flashing goes fine, but the device does not boot and is stuck in boot loader mode.
If I then only flash the CE partt of the original T-Mobile ROM, then the device boots again, with radio and ext. ROM from previous attempt.
What am I doiing wrong?
I understand that there is no CID unlocker for universal and I have to use MaUpgradeUt_noID.exe. Is that correct? Is MaUpgradeUt_noID.exe.also for universal, I don't see the universal picture in that tool..
I used ROM: UNI_QTEK_13077_176_10900_WWE_Ship.exe, I also tried a jasjar ROM that another dutch T-Mobile user successfull installed.
Any tips?
Ronald
Only thing I know is that I can flash any rom 2 my dutch t-mobile mda pro.
When you run it the first time, it goes into the bootloader.
Then you must run it a second time to start.
worked 4 me
While beiing in bootloader I tried serveral ROM's they all failed to boot. The only ROM I can boot is the original T-Mobile ROM.
Do you flash with MaUpgradeUt_noID.exe? or another flash tool?
Ronald
Same here I am able to flash my MDA Pro with anything I want, and I did it about 10 time already.
Maybe they are now selling devices with something protecting from flasing the ROM with a different then from T-Mobiel ?
I have tried it once again and followed these instructions and now it worked (I only updated CE):
http://forum.xda-developers.com/viewtopic.php?t=45874&highlight=maupgradeutnoid
The difference between wat I did and these instructions is: The editting of ruu.conf. The universal does NOT need the line [CHECKCEID_TYPE]=1
Ronald
search voor the update rom WITHOUT _NoID.exe tool.
i have updated my dutch mda pro first time with changing provider id and that worked fine. yesterday i updated with the noID.exe and resulted in a crash in bootmenu. after that i change the provider id and i worked well.
damm slecht engels, kort gezegd.
gebruik HTC64_Extended_ROM_Tool om provider id aan te passen in de nfb bestanden. bij mij werkt het op deze manier prima.
My previous posting was not clear, I am now running with a none T-Mobile ROM. I changed my previous posting.
Ronald
Could someone please explain how I can update my rom to WM6 with vista? I found some procedures but got the impression that they became simpler in time but after reading a lot I can't find it back.
Or is there no simple way under vista. If there is I think a lot of users will be interested.
thanks
Present :
http://www.forummobiles.com/index.php?showtopic=139079
thanks!
But it didn't solve my problem allso under xp I keep getting the message that the upload utility is corrupt and it immediately goes to 100%. On the pda I am in the bootloader so all the connecting goes well.
I unlocked the sim and tested this by using another sim and phoning with it.
I allso cannot believe that the O2 rom that I try to install that is in this forum is corrupt.
BTW I hope that
- Connectez le PDA au PC, attendez qu'il soit connecté à Activsync (Gestionnaire pour appareils Windows Mobile sous Vista)".
means that I can use the vista mobility centre instead of active sync?
Do I have to change something there?
The error is
ERROR[270] : UPDATE ERROR
The image file is corrupted. Please check your update utility.
Ok, it worked but only with the rom that is given on that french site.
Or probably did something wrong.
Thnx!
I'm trying to flash my M800 bought in Italy with Country Code ITA (on booting screen is VER A42 ITA 040 0264 - 2008/01/15 15:59) with a new ROM from ETEN-Users forum with WM 6.1 cooked for M800. The new ROM is WWE edition. When I try to flash it (in bootloader mode or in soft bootloader mode) according to the procedure, I receive the error "OS Image is NOT compatible wit" (and I think "...with your hardware" as seen on other threads).
********************
USB Downloader 0024
Flash Capacity=256MB
USB Downloader Ready.
SD Card In
Find SDMMC Card.
File= TEMP BIN
Program Image from SDMMC
update OS Image
Please Waiting.
OS Image is NOT compatible wit
USB host is not connected yet.
*************
And it stops until soft reset. How I can workaround the CID check (Country ID unlock)? When I succeded on Himalaya a lot of years ago, I edited in HEX the ROM file... can u tell me how to edit and where, to let my WWE OS Image could be accepted by my ITA M800? Or can I use a different bootlader that wouldn't do the Country ID check?
thank's
Cristian
hello,
i've got a Mda compact 3 (t-mobile)
ipl 3.15.0001
spl 3.15.0000
gsm 02.92.90
os 3.15.0.0
sinds yesterday it gives me the message:
Device start up failed due to sudden loss of power.
i've tried hard reset, format etc butt still get the message
now i found a posttread that should do the trick
get it in to booloadermode and flash it with a official rom
butt i cant find on the net
a original Dutch/nl rom ...
can somebody help me ....dont what to do!
dutch trans.
Orgineel Mda compact 3 gezocht
je zou mij erggg blij mee maken
nld rom
dont think there is a download avaliable for dutch / nld rom.. anywere..
i have a friend looking for this rom..
search for him and ask him if he has found it..
johanis1982