Develop Bugs

ARTEMIS BLOCKED / BRICKED Help Please

I updated my rom from the original spanish version to a Artemis_Touch_3.01
After some use, the device is blocked.
It starts the HArd reset, after "Format messages" It starts HTC white screen
IPL 3.13.0001
SPL 3.13.0000
and nothing more
.
It also works ROM update mode (Three colors screen) but when I execute the Rom update frommy pc, it reaches 2/3% and gives different Errors depending the ROM,
"Ivalid Vender ID [294] when I use the ROM HTC_P3300_SPA_3.13.412.1_4.1.13.44_02.94.90_Ship_R
ERROR [270]: Update Error -The Image File is corrupted - When I use Black & Blue 4.3 or Artemis_Touch_3.01
I need help!!!

you need to flash your mobile with the original rom from your provider (spanish one's).

The thing is Im not sure which was the original version that was installed,
I tried with this one and didnt work
Ivalid Vender ID [294] when I use the ROM HTC_P3300_SPA_3.13.412.1_4.1.13.44_02.94.90_Ship_R
how can I know which rom I have to use?

Aquí tienes la oficial de Movistar que te servirá para arreglar tu HTC...
http://member.htc.com/ruudownload/Telefonica/TelefonicaWM6Step1.aspx
Un saludo
This is the oficial movistar ROM...
http://member.htc.com/ruudownload/Telefonica/TelefonicaWM6Step1.aspx

Uploaded the OFFICIAL WM6 MOVISTAR in RPSHARE
Hello all
In order to make easier the download process I have upload the file in Rapidshare, through this way you do not have to enter your Telefonica Serial Number .
http://rapidshare.com/files/7872213...A_3.15.621.1_4.1.13.50_03.06.90_Ship.exe.html
Best Regard.

It still doesn't work
when It reaches 2% it gives
ERROR Invalid Vender ID [294]
Coul be an issue with the ttery that has no charge? and I cant charge it?

martingzm said:
IPL 3.13.0001
SPL 3.13.0000
Click to expand...
Click to collapse
Sounds like you forgot to use USPL first. Read the sticky at the top of the Artemis forum.

cr0bar said:
Sounds like you forgot to use USPL first. Read the sticky at the top of the Artemis forum.
Click to expand...
Click to collapse
If phone bricked can't run USPL at all.Because USPL just work in Active Sync PPC to PC

Correct, and if you don't find the original ROM, no way for you to unbrick the mobile...

You should be able to use imei-check's unlocker though right? This will remove the super-cid and allow you to flash any carrier's rom.

I contacted with the repair service and now I know which is the original version Installed in my artemis
Imagen Software: 3.13.412.1
Imagen Extendida: 4.1.13.44
Imagen Radio: 02.94.90
If anyone have them, please send me the link...

Think i need that file to, same issue pls hilfe

please help me updsating to wm6..so many problems for a noob

hi ppl...
I am having many problems installing any rom on my pda trinity ..
Can´t do hard-spl at first time, got error 246. Then, appears bootloader, i restart the application, and at the second time could install it .. ( sems odd to me)..can confirm hardspl is installed.
Then i have downloaded the dopod wm6 and when i try to install, get invalid id error at 1%..it stucks in bootloader..get this on it:
TRIN100
IPL - 0.50
TRIN100
SPL-3.03.0000 (why this?? )
Fortunately can install my official rom from htc..
Conclusion: stick to my official rom ( portuguese ).. stake zero.
But someone already had this problem? Or similar?
i am fed up with seeking.. forum xda, trinityguides .. google..all kind of foruns
what i am doing wrong? Have afraid doing the update with a cook rom my pda crashes..
what can i do?? what have my pda ??
p.s-> 10x in adavance..happy good year

Dude, you should use search function!
There are many link to Error 246
I suggest read this:
www.trinityguides.info
Here you can find everything. Error 246 too...
This is the rom flash Bible by racer_x!

Jeanxito said:
hi ppl...
I am having many problems installing any rom on my pda trinity ..
Can´t do hard-spl at first time, got error 246. Then, appears bootloader, i restart the application, and at the second time could install it .. ( sems odd to me)..can confirm hardspl is installed.
Then i have downloaded the dopod wm6 and when i try to install, get invalid id error at 1%..it stucks in bootloader..get this on it:
TRIN100
IPL - 0.50
TRIN100
SPL-3.03.0000 (why this?? )
Fortunately can install my official rom from htc..
Conclusion: stick to my official rom ( portuguese ).. stake zero.
But someone already had this problem? Or similar?
i am fed up with seeking.. forum xda, trinityguides .. google..all kind of foruns
what i am doing wrong? Have afraid doing the update with a cook rom my pda crashes..
what can i do?? what have my pda ??
p.s-> 10x in adavance..happy good year
Click to expand...
Click to collapse
From reading the above - I don't believe that the 246 error is your problem. (The 246 error is due to the Rom Upgrade Utility not waiting for the trinity to reconnect in bootloader mode - as soon as the connection is lost you get that. as you have seen, by restarting the RUU - or only starting the RUU when the phone is manually in bootloader mode - you can get the ROM loaded.)
I believe your problem is the stuck at 1% trying to flash the dopod ROM.
My 2 cents: forget the DOPOD ROM - it really is not as good as the cooked ROMs - in this case - "official" is not better.
The 1% sticking problem is a problem with this ROM.
Download another ROM (which one is not an easy question - but I have heard good things about sammy_deluxe ROM if you're looking for a portuguese ROM) and try updating with another ROM. it will work. Patience!
Happy new year to you too

MDA Compact IV - ROM 1.37.111.3 / Radio 1.00.25.03

Heya,
just tried to install a new ROM to my T-Mobile MDA IV with ROM 1.37.111.3 and Radio 1.00.25.03. I followed the Upgrade Instructions on http://modmydiamond.info. On Step 2 when actually updating my rom, which is supposed to take 10 minutes, a dialog appeared on my mda compact iv stating that an unsecure program tries to start and i have to choose yes or no. I choosed yes. It then only took like 1 minute and the progress bar on my pc stated 100%. I then performed the Soft Reset. Now after some time my Device stated its reinitialising itself... in the end my device didnt change and its back to the Original ROM.
I think it has something to do with my rom being unsigned? But i am really not sure since i am totally new to all of this. I tried reading everything up but the information is really wide spread.
If anyone could help my by posting accurate instructions on what i am supposed to do now to get a new rom working. Would be really great, my device is pretty slow atm.
thanks

I did the same yesterday, and i still got the original T-Mobile Rom.
Is it possible to change the rom????

I thing you have no-unsignet HardSPL.

Hello,
sorry. Do yu habe the orginal Rom vor the MDA compct IV? Ich have change it and i will back to the orginal.
Please Help.
Mecki

I believe you have just installed HARD SPL .., and not actually flashed a rom yet .. could be wrong though

I installed Hard SPL olinex. In GErman : unsiegniert.
I have after this install der V6 Rom from this sites
SORRY ABOUT My ENGLISH

help with ROM upgrade and problems with SIM

Hi i have a Diamond that i bought in Russia and now i want it in Swedish.
So i downloaded a swedish ROM: DIAM1.37.413.3SVE
And i have the Unsign-Hard-SPL-Diamond-Oilnex 1.40
So when i have installed the SPL, And the Swedish ROM, Everythings OK, Runs like normall BUT when i put a SIM Card inside the Diamond it wont work, Cant call, The Touch screen will not work right, Its freezing and booting the device... Why? Do i need some "Radio" or whats it called?
Im very new about this som please help me and explain good-easy how to do step by step
When i start the Diamond it says;
R 1.00.25.03
G 52.26a.25.09
D 1.37.00.00
If that says anything?
Hope for some expert help. Best regards. Micke!

micke99 said:
Hi i have a Diamond that i bought in Russia and now i want it in Swedish.
So i downloaded a swedish ROM: DIAM1.37.413.3SVE
And i have the Unsign-Hard-SPL-Diamond-Oilnex 1.40
So when i have installed the SPL, And the Swedish ROM, Everythings OK, Runs like normall BUT when i put a SIM Card inside the Diamond it wont work, Cant call, The Touch screen will not work right, Its freezing and booting the device... Why? Do i need some "Radio" or whats it called?
Im very new about this som please help me and explain good-easy how to do step by step
When i start the Diamond it says;
R 1.00.25.03
G 52.26a.25.09
D 1.37.00.00
If that says anything?
Hope for some expert help. Best regards. Micke!
Click to expand...
Click to collapse
Hi i'm not an expert, but it's not right that when you start the Diamond it says "1.37.00.00" when in fact you have installed ROM "1.37.413.3SVE".
I would suggest try flashing the hard SPL again, then flash the new ROM again. (and use with the signed version of Hard SPL this time for safety against bricking).

Now i tryed the Signed 1.30 Oilnex SPL. And then flashed again with the Swedish ROM.
When i flashed with the Swedish ROM it says that i have 1.30 Oilnex in the display.
But when i start the diamond it still says 1.37.00.00 is that right?
Still it wont work with SIM inside...

micke99 said:
Now i tryed the Signed 1.30 Oilnex SPL. And then flashed again with the Swedish ROM.
When i flashed with the Swedish ROM it says that i have 1.30 Oilnex in the display.
But when i start the diamond it still says 1.37.00.00 is that right?
Still it wont work with SIM inside...
Click to expand...
Click to collapse
That is not really a problem. On my phone, which works perfectly well, I also only see the major number release (i.e. 1.37.00.00). I don't think that's a symptom of why your phone is not working. You should try to find the cause elsewhere, but I also do not know where you should start.

Yes because the phone is working with russian ROM, But not when i install the Swedish... hmm...
Any clues=?

i can help you - flash this:
http://rapidshare.com/files/129598071/Diamond_Radio_1.00.25.05.rar
and your swedish rom will work

official dutch/NL Rom NEEDED

hello,
i've got a Mda compact 3 (t-mobile)
ipl 3.15.0001
spl 3.15.0000
gsm 02.92.90
os 3.15.0.0
sinds yesterday it gives me the message:
Device start up failed due to sudden loss of power.
i've tried hard reset, format etc butt still get the message
now i found a posttread that should do the trick
get it in to booloadermode and flash it with a official rom
butt i cant find on the net
a original Dutch/nl rom ...
does somebody has it ...can you please post it
dutch trans.
Orgineel Mda compact 3 gezocht
je zou mij erggg blij mee maken

did u even upgrade it before with a new rom?

ive never seen the sudden loss of power message...

mvenneker said:
did u even upgrade it before with a new rom?
Click to expand...
Click to collapse
my litle brother had it for a couple days dont know
what he's done with it.

i hope in someway i can fixed it
butt first i most try to putt in someway the original nld rom back
do you maybe have a link or advice?

can somebody help me with my problem

hope this helps
http://rapidshare.com/files/94476422/HTC_P3300_NLD_3.13.404.1_4.1.13.44_02.94.90_Ship_R.exe.html

i've tried it
but after 2 % it stops with message
ERROR Invalid model (244)
(thnx for your reply (sheenick)