Related
Well here it is . I have upgraded my qtek with http://www.qtek.nu/files/RUU172752WWE.zip from1.66 to 1.72. I did not hard reset the device before the upgrade so I had some problems during upgrade bit now all is ok. If anyone wants to upgrade also please find the solution for the country ID problem that mey occur. http://forum.xda-developers.com/viewtopic.php?t=12100 I DID not have that problem but you might. So before the upgrade please inform yourself about the problems that you may face.
Langurage ID error 121 during upgrade
Hello,
I get the language ID Error 121 when trying the Upgrade to my Qtek 2020 French version Rom 1.66.02 FRA radio 1.10.00 Version de proto 1337.18 Version de Extrom 1.66.219
I want to use my Qtek in English that is my goal.
Thanks is advance
Re: Langurage ID error 121 during upgrade
mghinc said:
Hello,
I get the language ID Error 121 when trying the Upgrade to my Qtek 2020 French version Rom 1.66.02 FRA radio 1.10.00 Version de proto 1337.18 Version de Extrom 1.66.219
I want to use my Qtek in English that is my goal.
Thanks is advance
Click to expand...
Click to collapse
You need to alter the ROM headers. See my post here for details on how to do it and also on how to avoid future problems.
I get the error not a valid win32 app when opening himagetda
I cant open himagetdevicedata.exe because i get the error not a valid win32 app when opening himagetdata.exe Also, when I upack ruu166150wwe I cant find the directory with the subdirectory containing the files himaclearjumpcode etc.
Thanks again in advance
I got to the Himaclearjumpcode using winrar thanks now
I just need to load himagetdevicedata.exe to load onto my qtek 2020
rom 1.66.02 FRA
date of rom 02/03/04
radio 1.10.00
de proto 1337.18
de extrom 1.66.219
My Qtek had the higher rom on it when i bought it but I was todl I needed to downgrade the rom to make it work in English. I have not been able to get it to work and I wonder do I need to upgrade the French version before changing to English. I just want it to work in English.
Thanks in advance
I forgot to mention that I am using Guest with my USB Active
sync 3.71. I copy the himagetdevicedata into the Mobile Device and I can see it on my qtek but I just cannot open it. That is the problem.
Thanks and sorry for so many posts
Re: I forgot to mention that I am using Guest with my USB Ac
mghinc said:
sync 3.71. I copy the himagetdevicedata into the Mobile Device and I can see it on my qtek but I just cannot open it. That is the problem.
Thanks and sorry for so many posts
Click to expand...
Click to collapse
You need to execute HimaGetDeviceData.exe on the device directly by tapping on it. Then copy the DeviceData.txt file it produces back onto your PC and view it with Notepad on your PC.
I have encountered an problem with bluetooth. I am trying to conect to gprs using Qtek 2020 with Nokia 6600 and P900. Before upgrade it went smoothly now not. So I am conecting to gprs via 6600 or P900 and it is not working
I try to execute the himagetdevice data by tapping on it
on my Qtek but it will not open. I copy it successfully on my laptop then it loads onto my Qtek but when I tap it to open, nothing happens. In other words, I cant open it. I also used winrar to get to the upgrade files himaclearjump, himagetdevicedata, etc but I cant take them from winrar to my Qtek. Is that because I did not buy winrar? I have upgraded my windows to SP2 so the program unzips automatically and I cant find the individual update files like I can in winrar.
Thanks
Re: I try to execute the himagetdevice data by tapping on it
mghinc said:
on my Qtek but it will not open. I copy it successfully on my laptop then it loads onto my Qtek but when I tap it to open, nothing happens. In other words, I cant open it. I also used winrar to get to the upgrade files himaclearjump, himagetdevicedata, etc but I cant take them from winrar to my Qtek. Is that because I did not buy winrar? I have upgraded my windows to SP2 so the program unzips automatically and I cant find the individual update files like I can in winrar.
Thanks
Click to expand...
Click to collapse
Please follow the instructions in my post here. Most of what you have been asking is covered in there.
To answer your questions anyway, when you run HimaGetDeviceData on your device there is no visual indication that anything has happened, but a file called DeviceData.txt will have been placed in the Windows folder of the device. No other files should be transferred to your device, as the upgrade process itself is run from the PC.
I have a xda2i and i downloaded the custom rom XDA-developers-SER-v12
and all i get is 2 error messege popups and i get it every time i try.. i even changed the usb device and 2 cradles.. if anyone has any advice i would be greatfull... also trying to unlock my xda2i its a great device just wish it was a great phone too.
Acid... also have included screen shots of the errors
Are you sure, that you have a XDA IIi? These ROM is just for the Wallaby (XDA I) device (Modell PW10).
If you have a Wallaby device, than your installed ROM prohibit flashing via EXE. You have to use SD-Card-flashing via Bootloader.....
Search the Forum and/or wiki, how to do this....
Stefan
hi!! you know if SER v1.2 run on Kaiser (TyTN II)? i try to install this on my htc but i get it error:
ERROR: GetDeviceData - No se puede encontrar el m¾dulo especificado.
error getting devicedata
this is a missing dll? you know if SER use a runtime DLL?
Hi,
I have a french HTC P3300 that is delivered with TomTom.
Unfortunately, TomTom is included in the WM5 rom.
I would like to flash to WM6 but will I loose TomTom?
If yes, can i retrieve it in any way with the serial number?
Or is there a way to dump my WM5 rom with TomTom to be able
to downgrade to the original form in case of problem?
My HTC is not locked on any provider, I bought it on amazon.
Thanks
nickytheshaft said:
Hi,
I have a french HTC P3300 that is delivered with TomTom.
Unfortunately, TomTom is included in the WM5 rom.
I would like to flash to WM6 but will I loose TomTom?
If yes, can i retrieve it in any way with the serial number?
My HTC is not locked on any provider, I bought it on amazon.
Thanks
Click to expand...
Click to collapse
I would have thought that Tom Tom comes on a micro sd card rather than as part of the rom.
Otherwise any update now or in the future would be futile as you will lose it.
Has the phone got a memory card in it?
If yes use active sync to browse to the storage card
do you see any cab files for tom tom on there?
let me know and I wil try and help.
alternatively contact tom tom and tell them your serial number and I have been told you can download tom tom software free but just need serial number to use it and also have the maps.
Finaly if it indeed is stored on the phone are you sure it isnt on a disc of some sort that cam with the device.
I will try and help whre possible but give more detail in your post. ie what you have tried etc
Si tu n'as plus tomtom intégré dans la nouvelle rom, tu peux installer l'installeur officiel. Si tu ne le trouve pas, je peux te l'envoyer.
Ce que je me demande, comme toi sans doute, c'est si un carte achetée et activé sous la ROM WM5 marchera toujours... Bref, le numéro de série, restera-t-il le même ?
magpie2000k, I baught my micro sd seperately so I donn't think that i'll find any cab on it exept the one of the tomtom upgrade. I am at my office and don't have activesync here, i'll try when I get home this evening.
I have a cd delivered with my phone, and with a wm5 sn on it, could it be a restor disc? how can i check if there is in fact the install for tomtom on it?
DrakkoFR, i'll stay in english as it is the rule of the forum. The official install could be interesting. I don't have it so i would be interested in it. But how can I register on the TomTom site for futur updates? And yes, i don't know if the maps will be recognised.
Tank you both for your answers.
The easiest way:
copy all the files from \Program Files\Navigator to Storage Card\Program Files\Navigator.
After flashing just create shortcut (using i.e. resco Explorer).
This will keep all your settings and maps activation. And you will save up some space and a time...
I done like this and it works on my xda orbit.
There is no need to install tomtom any more.
How to upgrade to WM6 and keep supplied TomTom
nickytheshaft said:
Hi,
I have a french HTC P3300 that is delivered with TomTom.
Unfortunately, TomTom is included in the WM5 rom.
I would like to flash to WM6 but will I loose TomTom?
If yes, can i retrieve it in any way with the serial number?
Or is there a way to dump my WM5 rom with TomTom to be able
to downgrade to the original form in case of problem?
My HTC is not locked on any provider, I bought it on amazon.
Thanks
Click to expand...
Click to collapse
There is a working solution nicktheshaft, I use this to run tomtom all the time no problems, and it basically allows you to run tomtom from the memory card with no instal to your p3300, saving about 5mb of ram also.
1-With your WM5 rom loaded simply copy the folder tomtom from your p3300 (my device/program files) to your memory card root, (the folder should contain tomtom navigator.exe, data chk file etc.)
You can test this by uninstalling tomtom after you have copied the tomtom folder to sd card, then running tomtom from this folder on sd card, i.e tomtom navigator.exe
You then upgrade to WM6 and create a shortcut from the folder on your memory card (create a shortcut from tomtom navigator.exe in this new location on your memory card, and put it in my device/windows/start menu/programs), you will then be able to assign a button to launch tomtom from the settings menu.
thank you all for your advises...
I think I am soon going to flash to WM6 )
Is the flash easy? Do I just run the update or must I Unlock the CID knowing that my HTC is not operator locked?
gadjet said:
There is a working solution nicktheshaft, I use this to run tomtom all the time no problems, and it basically allows you to run tomtom from the memory card with no instal to your p3300, saving about 5mb of ram also.
1-With your WM5 rom loaded simply copy the folder tomtom from your p3300 (my device/program files) to your memory card root, (the folder should contain tomtom navigator.exe, data chk file etc.)
You can test this by uninstalling tomtom after you have copied the tomtom folder to sd card, then running tomtom from this folder on sd card, i.e tomtom navigator.exe
You then upgrade to WM6 and create a shortcut from the folder on your memory card (create a shortcut from tomtom navigator.exe in this new location on your memory card, and put it in my device/windows/start menu/programs), you will then be able to assign a button to launch tomtom from the settings menu.
Click to expand...
Click to collapse
That's what I wrote... one post above yours...
nickytheshaft said:
thank you all for your advises...
I think I am soon going to flash to WM6 )
Is the flash easy? Do I just run the update or must I Unlock the CID knowing that my HTC is not operator locked?
Click to expand...
Click to collapse
Mate you must run USPL first then your rom of choice.
USPL removes the CID problem and then flashing should be a breeze.
Note that when flashing with USPL you device will return to what apperas to be a normal state (ie it lokks no different and has all contacts etc intact.)
This put me off at first because I couldnt see that there was any difference. I have now flashed a number of devices and used USPL over 30 times and not once have I had any problem at all. If in doubt read the idiots guide thread I think about half way down on the first page is a full written process of how to do it. Follow it and all will be well.
I am using B&B 3.7 from Tom and it is great has no issues with TOMTOM working. yes it has one or two very minor bugs that irritate rather than annoy. But these are certainly acceptable for the benefits of the WM6 and the rom interface that it has.
Photo contacts is a dream.
Shortcuts to everything you need. I very rarely use the stylus now even my fat fingers can navigate through and it becomes a truely one handed device.
When I had original rom i had to use stylus all the time. Thanks to Tom that to some extent is a thing of the past. Still use stylus for writing texts and emails but thats about it.
good luck and I am sure you will not be dissapointed.
Maybe i'll give it a try.
What are these little bugs?
Does the VOIP work on this version?
nickytheshaft said:
Maybe i'll give it a try.
What are these little bugs?
Does the VOIP work on this version?
Click to expand...
Click to collapse
Questions questions questions
The bugs are minor.
In the dial pad you have to go into call history to redial last number. There is a fix but you lose the lovely large buttion dial pad I beleive (its no great shakes.)
when typing a phone number iut is green in dial pad and not easy to see what you have typed. again very livable and probably a fix somewhere ie a registry tweak or something. As I normally dial numbers of people in my address book it very rarely causes me a problem.
The others for what they are I cant remember you tend to find work arounds that in time become the norm and then arent bugs at all if you catch my drift.
I dont believe you will regret it.
VOIP works for me
thanks magpie2000k, i'll give it a shot this evening if i have time.
nickytheshaft said:
thanks magpie2000k, i'll give it a shot this evening if i have time.
Click to expand...
Click to collapse
Youre welcome
this is the idiots guide link
http://forum.xda-developers.com/showthread.php?t=311650
Oooops..
goblinIT said:
That's what I wrote... one post above yours...
Click to expand...
Click to collapse
Appologies goblin, when i read the thread you answer was not there (10:07am), and i was repling from work and it took me 20 mins to complete my reply (10:21am).
At least we are all here to help all at XDA-Developers though...
damn, just tried tom's rom and it failed at 3%
i'll try later again, i have to go out.
cheers
nickytheshaft said:
damn, just tried tom's rom and it failed at 3%
i'll try later again, i have to go out.
cheers
Click to expand...
Click to collapse
link here :
http://forum.xda-developers.com/showthread.php?t=317876
Hello,
I'm quite new here and find this website very usefull
Is it possible to switch from a WM5 french version to a WM6 english one?
Thanks,
Alex
Alx007 said:
Hello,
I'm quite new here and find this website very usefull
Is it possible to switch from a WM5 french version to a WM6 english one?
Thanks,
Alex
Click to expand...
Click to collapse
yes, it always is. just don't forget to flash your device first with pof's USPL. then you can flash it with any rom you want. what french rom do you have? is it htc french rom? or m650? with the htc rom you may not have any probs, but i'm not really sure with m650, it usually has problems with gps functionality when flashing with a different rom. but just to be on the safe side, it is always useful to have a backup of your original rom, incase something goes wrong.
and NEVER, NEVER, NEVER forget.... number one rule: ALWAYS flash your device with pof's USPL each time you want to flash your device with another ROM.
redski said:
yes, it always is. just don't forget to flash your device first with pof's USPL. then you can flash it with any rom you want. what french rom do you have? is it htc french rom? or m650? with the htc rom you may not have any probs, but i'm not really sure with m650, it usually has problems with gps functionality when flashing with a different rom. but just to be on the safe side, it is always useful to have a backup of your original rom, incase something goes wrong.
Click to expand...
Click to collapse
Thank you
Yes, I have the HTC french rom. My device is unlocked.
Regards,
Alx2007
no prob.
hope everything goes fine for you. even if your phone's unlocked, if you had problem flashing the rom, try pof's. it does work wonders!
Hello to all
i've tried different WM6 Roms but i'm noct convinced to use it yet.
That's why i'm trying to find a way to downgrade to WM5.
I know that there are several how-tos but none worked yet.
I already tried the opposite way via uspl to downgrade. no success yet.
WM5 Rom is here, when trying to downgrade i get the error message 260 which means no connection to the device. i'm using the same machine for downgrading as for upgrading, nothing but the Rom on the phone has changed.
Currently i'm using the o2-xda-orbit german rom.
If anybody has a clue what to do to get the old stuff back, thx in advance
blue
You can downgrade your O2 Orbit successfully if you have Original German ROM (WM5) which is available somewhere in this forum. I can't remember which thread but if you do some search I am sure that you will find it.
I have just found Original German O2 Orbit ROM here : ftp://xda:[email protected]/Uploads/Upload/Official XDA Orbit ROM
Thank you for your answers!
I own a HTC P3300 Artemis.
Using USPL and the original o2 german wm6 rom i flashed it with WM6.
I already downloaded a german wm5 rom, my problem right now is that i cannot by any unknown circumstances get this rom on my phone.
No matter whether i use uspl before trying to flash the original rom or if i don't use uspl the result remains the same.
The update utility keeps telling me that it is not possible to connect to my smartphone.
Active Sync/ Mobile devices center connection is working fine though.
Greets blue
You can try with this Original HTC Artemis WM5 ROM here : http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Let us know if this help you.
Thy to all, i made it!
Main problem seemed to be my os!
even though i already flashed using vista as os this time it didn't work out.
I used my other computer running xp and it worked on the first run!
greets blue
... hear that
i recognize that problem... even though i always sync with my laptop (Vista) i use another com (XP) to flash..
Don´t know why but it seems alot have experienced this prob.
I have bought a htc3300 from a dealer that i find at skroutz but after 1 day i had lost the 2nd language keyboard so i took it back to the dealer to fix the problem he said that wm6 is free to upgrade so let passed it but he put the touch htc software that don't work good how can i downgrade to wm5 again please help it's only 2 days mobile !!!!
well after many pockets of tobaccos i fix it with the Original HTC Artemis WM5 ROM here : http://rapidshare.com/files/19322112...0_WWE_SHIP.rar thanxs very much it finds the image version of htc touch and make a downgrade that was that the upsl cannot do ,the upls reload the same version that had before maybe because it didn't know the previus
Humm??
The UPLS is not a ROM??
When you run UPLS it sets the CID registration, so you can flash any ROM you want - but offcouse you still have to get the ROM
you 're right after upsl you can downgrade or upgrade... many tnx for info...
HTC P3300
can´t dowgrade wm6 to wm5 after 2 percent it return with a error
ERROR [244] : INVALID MODEL ID
rom image HTC_1.12.405.01_026790_WWE_SHIP.rar
help
++++++++++help++++++++++
For French User, i'd Upload an Official Operator Orange Version here :
ftp://xda:[email protected], Original ROM Fr) pour M650_0407.rar
Direct Download here :
http://www.mobilite.fr.orange-business.com/public/oev4/html/fr/pme/mobiles/ba/dl.php?mi=164&pi=2580
I updated my rom from the original spanish version to a Artemis_Touch_3.01
After some use, the device is blocked.
It starts the HArd reset, after "Format messages" It starts HTC white screen
IPL 3.13.0001
SPL 3.13.0000
and nothing more
.
It also works ROM update mode (Three colors screen) but when I execute the Rom update frommy pc, it reaches 2/3% and gives different Errors depending the ROM,
"Ivalid Vender ID [294] when I use the ROM HTC_P3300_SPA_3.13.412.1_4.1.13.44_02.94.90_Ship_R
ERROR [270]: Update Error -The Image File is corrupted - When I use Black & Blue 4.3 or Artemis_Touch_3.01
I need help!!!
you need to flash your mobile with the original rom from your provider (spanish one's).
The thing is Im not sure which was the original version that was installed,
I tried with this one and didnt work
Ivalid Vender ID [294] when I use the ROM HTC_P3300_SPA_3.13.412.1_4.1.13.44_02.94.90_Ship_R
how can I know which rom I have to use?
Aquí tienes la oficial de Movistar que te servirá para arreglar tu HTC...
http://member.htc.com/ruudownload/Telefonica/TelefonicaWM6Step1.aspx
Un saludo
This is the oficial movistar ROM...
http://member.htc.com/ruudownload/Telefonica/TelefonicaWM6Step1.aspx
Uploaded the OFFICIAL WM6 MOVISTAR in RPSHARE
Hello all
In order to make easier the download process I have upload the file in Rapidshare, through this way you do not have to enter your Telefonica Serial Number .
http://rapidshare.com/files/7872213...A_3.15.621.1_4.1.13.50_03.06.90_Ship.exe.html
Best Regard.
It still doesn't work
when It reaches 2% it gives
ERROR Invalid Vender ID [294]
Coul be an issue with the ttery that has no charge? and I cant charge it?
martingzm said:
IPL 3.13.0001
SPL 3.13.0000
Click to expand...
Click to collapse
Sounds like you forgot to use USPL first. Read the sticky at the top of the Artemis forum.
cr0bar said:
Sounds like you forgot to use USPL first. Read the sticky at the top of the Artemis forum.
Click to expand...
Click to collapse
If phone bricked can't run USPL at all.Because USPL just work in Active Sync PPC to PC
Correct, and if you don't find the original ROM, no way for you to unbrick the mobile...
You should be able to use imei-check's unlocker though right? This will remove the super-cid and allow you to flash any carrier's rom.
I contacted with the repair service and now I know which is the original version Installed in my artemis
Imagen Software: 3.13.412.1
Imagen Extendida: 4.1.13.44
Imagen Radio: 02.94.90
If anyone have them, please send me the link...
Think i need that file to, same issue pls hilfe