I have a xda2i with the following info
ROM version 1.10.00 WWE
ROM date 12/24/04
radio version 1.00.00
protocol version 1337.39
ExtRom 1.10.124 WWE
I am looking a for a upgraded version if anyone can help... it would be great if there was a wa to get rid of the o2 custom stuff on the xda too i dont like that too much can anyone help
Acid
At the moment there are no updates for the XDA2i but there is rumours of one in the pipelines... if its true or not remains to be seen but we can only hope.
As for removing the customised crap just do a hard reset (you'll loose all your stuff) , press power + reset.
Then when its installing a box will appear asking "Personal" or "Corporate" user, choose the corporate option and enter the password "0506"
hi
at the moment the only newer rom from our factory rom is that of pda2k.. do a search for my posts and in there you will see where to get it and how to get past the country id error..
Danny-B- I didnt see the box will appear asking "Personal" or "Corporate" user it just says will customize my xda in 3 seconds and i cant do anything to stop it and i cant even uninstall the software it is linked into everything.. its really annoying and this o2 thing is just eating up memory and space... can you help
Acideax
I have a xda2i with the following info
ROM version 1.10.00 WWE
ROM date 12/24/04
radio version 1.00.00
protocol version 1337.39
ExtRom 1.10.124 WWE
Are you sure you didnt miss it ?
Im sure it auto installs personal user if not selected within a certain time.
The best thing to do would be, Hard reset it, then just sit and watch it install till it gets to the choice point.
Another thing that might be slowing your device down can be the SD card if its over 512Mb , the XDA 2i sems to have a slight problem with them and slows everything down, well it does in my case anyway.
rom
my xda2 i spec.
rom version-1.11.00 wwe
rom date-01/27/05
radio -1.00.00
protocol-1337.39
ext rom version-1.11.923 wwe
XDA2i & WM2005 ?!?
HI !
I´m using the XDA2i / O2-Germany with WM2003SE..
ROM 1.11.01GER
Ratio 1.03.00
Protokoll 1337.42
ExtROM 1.11.132GER
I´ve tried to upgrade to WM5 but...
HimaUpgradeUt.exe 1.2.0.0
nk.nbf 1.50f
WM 2003 ROM Image Editor 1.4.26
the firste tries I´ve got ERROR: wrong device, so I changed the devicetype from PH10 to PH10C like written on start-settings-deviceinformations...
I´ve tried again...
I started HimaUpgradeUt.exe and after a few sec. the screen say´s "deviceinformations: XXX
XXX
ROM XXX
Image info´s XXX
.....
if I press UPGRADE the massage "don´t remove USB & power" appiers then a new screen with the status for the upgradeprocess....
BUT... after 20 sec. I always get ERROR 101 (connectionerror).
- any idea ?
The XDA2i does not support the leaked WM2005 it only works on the XDA 2
Although the devices look the same the internal hardware is different.
The XDA2i does not support the leaked WM2005
sad to hear that...
ok, thank you but do you know if it´s possible to get an upgrade in the future ?
do you know where the problem is? (Image ore Updatesoftware?)
???!!!
The problem is that the software (wm2005) has to be custom made to suit the hardware in the phone so ... HTC - the makers of the phone or O2 would have to "build" the software for the phone.
Its because all the correct drivers and such have to be correct for the device to function.
But you never know, it might be a possible upgrade in the future, youll just have to wait and see.
Upgrade for XDA2i
Ok, I´ve found an original Upgrade-Tool & the Rom-files from o2UK....
My next Problem is the Password to edit the nk.nbf to chage the Image...
I´m using WM 2003 ROM Image Editor 1.4.26
Xda IIi ROM v 1.10.124 (43.6MB) - english
AlUpgradeUt.exe 2.0.0.1
when I start the upgrade I always get the
"ERROR 120: COUNTRY ID ERROR".... that´s because I have the
o2 - Germany device...
Can somebody help me to findout the right password for the Rom-editor ?
[/b]
Hi Folks,
that is what I have: a MDA Pro from German T-Mobile with latest T-Mobile SW
that is what I want: just to get the MSFP on my device
that is what I did:
- removed the SimLock with the LokiWiz Tool
- upgraded the ROM with the bootloader method (as all the other things were not working) with Universal_Upgrade_v1.30.68_radio_1.09.0.zip
Now that is the english version (on a qwertz keyboard). Neither the latest Qtek 9000 ROM nor the Xda_exec_Upgrade_1.30.162.exe is installable. I tried to trick them out: during the installation the nk.nbf file is extracted. I just copied this file to an alternate location and later I tried to install this with the bootloader method. But the tool does not even recognize the ROM (although it is located in the appropriate folder).
I would be glad if anybody has a hint for me.
thanks tschaj
:?: Could you explain how did you remove SIMlock from Universal? :?:
here's the tool (you have to register)
http://buzzdev.net/component/option,com_remository/Itemid,109/func,select/id,29/
and here the description:
http://forum.xda-developers.com/viewtopic.php?t=33796&highlight=lokiwiz
ehh
that is the unlocktool for the wizzard lol. not for they universal.. you cant unlock the universal yet cheaply haahah
... mmmhhh: unfortunately dvl is right, the SIM is still locked.
But as mentioned initially my aim was to use the MSFP (and if possible the latest Qtek 9000 Software).
tschaj
Hello
I am new here, i have a qtek 9000 that run wm5, what should i do to up-grade to wm6. What up-grade do you suggest i need in order to increase the performance of my phone.
Here is all the information that i have on the phone.
rom version : 1.30.77 wwe
rom date 02/20/06
radio version; 1.11.00
Protocol version: 42.45.P
ExtROM version: 1.30.9090
The second problem that i hace is that the phone is constanly reseting, i don't know why, but when battery reach approx. 80% it turn off and reset. Then i have to plug in the charger in order for it to restart? Can anybody help me
thanks
My first post !
Hi, for the reset problem I suggest you to look to the wiki, you will find some types of strategies to fix this, it seems to be a battery problem(just my opinion). For the upgrade you have to look wath's the boothloader version of your device. If you have 1.00, you have to upgrade the boothloader before flashing a new wm6 rom. In any case you will find all this and other informations in the wiki. When you will be done, if you want, I will suggest you the best roms available .
P.S.: excuse me for bad english.
keleric said:
Hello
I am new here, i have a qtek 9000 that run wm5, what should i do to up-grade to wm6. What up-grade do you suggest i need in order to increase the performance of my phone.
Here is all the information that i have on the phone.
rom version : 1.30.77 wwe
rom date 02/20/06
radio version; 1.11.00
Protocol version: 42.45.P
ExtROM version: 1.30.9090
The second problem that i hace is that the phone is constanly reseting, i don't know why, but when battery reach approx. 80% it turn off and reset. Then i have to plug in the charger in order for it to restart? Can anybody help me
thanks
Click to expand...
Click to collapse
before upograding you have first to make a lot ( I really mean it) of reading thru 1) XDA_wiki and 2) all 3d you can on the different wm6 available ROMs ( see upgrade wm6 section) You can have an idea of what are the problems users have/are encountering.
My 1 cent
a)Enter into bootlader mode ( pls don t ask how, look and search) and find out if you have a G3 device ( vers 1.0x) or G4 ( vers 2.x) . Depending on this you have to first check if the ROM upgrade you ve selected among the different available is OK for your device. Few ROMS infact have different version for G3 and G4) . If you have a bootload vers 1.0 or below, first upgrade to a more recent version before even thinking to upgrade ROM.
the upgrade Bootload tools are available in general on your device site ( I have an Imate , I have the sw there) or look and search here....in this site there is EVERYTHING! go to the ftp section , link unders XDA-Wiki, Universal and search
b) upgrade to Active e Synch 4.5
c) Create a folder where you ll put the selected Wm6 version that you ve picked and unzip it.
d) You ll see the following files:
EnterBL
Get device data
RUU.conf
Ruu.dl
Ruuenc.dll
UI.dll
ROMUPGRADE.exe AND !!!!
nk-.nbf ( this is the ROM UPGRADE)
ms.-nbf ( this is the external ROM)
This is almost all what you need to start to upgrade. Infact you might also want to upgrade to a most recent radio version ( radio._nbf) . I am using 1.15 that is very stable and powerfull but pls read comment of users using the selected Wm6 you ve picked and check their coments. A higher version is not implicitely a better version.It depends on Wm6 rom version and the operator you re using.
Therefore, if you want to upgrade the radio as well , proceed to the FTP of universal, and download the radio version you like . Unzip the file , copy and paste JUST the radio._nbf file to the folder above created.
e)Connect to AS and make the last synch before the upgrade and disconnect
f) take sim and sd card out.
g) put down firewalls and antivirus on your PC
h) open AS and uncheck File/connection Settings/ USB connection
i) connect device to PC, you ll see AS wont start ( of course)
l) enter into bootloader mode
m) click on Romupgrade.exe
n) follow EXACLY instructions on your PC screen...be cool, be patiente. It will take some 20 minutes....
when everything is finished , disconnect , do a NORMAL soft reset and here you are.
Flag again USB connection in AS and synch. you have now a wm6 version. I am using Ranju 7.1 and it flys as an angel on my JJ, but I suppose there are plety good ones around
hey, i upgraded my Asus P525 to "Latest WM 6.1 version:
by
Alex[DFR] or sp3dev"
and it works great for me.
now i want to remove it from wm6 to wm5 again and i have the Orginal Rom for Asus P525 (V.3.42 Hebrew), i just need to install the Rom and it will back angain to Wm5? (Its Because i still have guaranty and it demands the manufacturer orginal Rom).
thank you very much,
Itay.
There's no problem. The only thing - you would possibly run ASUS.UnlockLangID.exe on your device before you start to flash it - otherwise you may get Wrong Language message.
thankl you very much.
and where can i find ASUS.UnlockLangID.exe? i have p525 and my Orginal Rom is 3.43 in Hebrew.
Download, extract, copy to your device (MiniSD), run....
For the future come to http://asusmobile.net/board/index.php if interested... It was just opened...
You may need to flash the same ROM 2 times to get the extension ROM and partition configuration back.
And...if you used the official WM6 ROM, the bootloader does not accept WM5 cap files, you need to decode the nb0 file and use that instead.
Hi guys
have a P525, originally purchased in UAE(English).
have sucessfully flashed to various WM6 Mobiz roms, v10, 18, 19 etc
now want to revert back to WM5, as PIM does not transfer, etc and many other programs (from WM5 ) do not work in WM6 environement.
Baut cannot revert back to WM5.
- downloaded various ASUS WM5 ROM, WWE, WWE ARA all versions 3.43 etc
- have tried using both bootloaders 06xxxxx and 07xxxxx
- with any official ASUS ROM, always get the following error
ROM image found :\MiniSD Card \Galaxy.cap
Language(English), is compatable with the device language(Unassigned).
then click System- Rom update , and imiditaely get the error:
ROM update cannot be applied to this regions version!
- i have also tried the ASUS.UnlockLangID ( runing this before attempting above update), but no difference, same error.
- i have also tried changing the local in system properties, to English, Arabic, Thai and reatempt falshing with ASUS WM5 roms but always get same error message as above.
PLEASE HELP
starkwong - what do ytou mean ?
"if you used the official WM6 ROM, the bootloader does not accept WM5 cap files, you need to decode the nb0 file and use that instead. "
how do you do this ? decode the nb0 file ?
can you provide detialed steps please.
Any other assitance would be apreciated, thanks guys
thanks
Good NEWS
For those who lost their .nv2 files and would like to generate new one, pls refer to:
[KS20] NV2 - QCN TOOLS V1.4 (new soft) [RELEASED]
The benefit of Unbranded .nv2 are:
1) With Unbranded .nv2 you can flash with any Official Unbranded rom directly, without modification need to solve the OTP and illegal use issue.
2) No more SIM lock
3) Polish's KS20 contains special .nv2, neither normal branded or unbranded version, in this case you will have to send me your .nv2 to do some modification before you can flash to other roms, otherwise OTP or illegal use would occur.
Click to expand...
Click to collapse
Important notice:
1. Before you do any flash, make sure you have a .nv2 backup with you or you will have troubles later, the size of .nv2 file is always about 116KB
Backup or restore .nv2 post: http://forum.xda-developers.com/showthread.php?t=396032
2. If you use "Erase EFS" option in LGMDP for flashing, you would have to restore your .nv2 file after flashing
3 If you use "none" option (Emergency mode) or Reset Database & Contents" option (Normal mode), you dun have to restore .nv2 file after flashing
LGMDP (Build 12.14)
http://www.megaupload.com/?d=TQCPLLMC
KS20 Service Manual
http://rapidshare.de/files/38526183/EN_KS20_SVC_ENG_1123_1.0_.pdf.html
Background Information
What is Branded and Unbranded version KS20?
Branded KS20 would have service provider logo at boot up screen while Unbranded KS20 would show "LG" only
However your KS20 is Branded or Unbranded version is actually depended on the .nv2 file in the phone
Branded KS20 has Branded .nv2 and Unbranded KS20 has Unbranded .nv2
What is .nv2 file?
It contains your KS20's imei no. and also calibration data for the phone functionality, thus if you lose .nv2 file, you will lose your imei no. and phone functionality = pure PDA
What application do i need for flashing?
LGMDP (LGMDP_EURO). There are two flashing modes can be used: (a) Normal mode and (b) Emergency mode
For details of it pls refer to http://forum.xda-developers.com/showthread.php?t=396032
What is different between LG Composite and Microsoft USBfn in engineering menu
"LG Composite" is for flashing new rom, backup and restore .nv2 ONLY
"Microsoft USBfn" is for conecting to Windows Mobile Device Centre or ActiveSync
What rom should you choose?
If you have a Branded KS20 you can flash to any Official Branded rom, but not Official Unbranded rom as "illegal use" and "OTP Block" will result
If you have a Unbranded KS20 you can flash to any Official Unbranded rom, but not Official Branded rom as "illegal use" and "OTP Block" will result
Note: Official rom from LG always has 1x .dz file only after unzip, if it is instead 1xFLASH.bin+10x.mbn files, it may be modified to be hybrid rom. It is always recommend to download Official Rom from this post ONLY.
What cause "illegal use" or "OTP Block" problem after flashing?
For "OTP block" or "illegal use" result after flashing, the reason is:
Unbranded phone flashed with Branded or Hybrid rom, OR Branded phone flashed with Unbranded rom
So, in order to eliminate the occurrence of Reason 1., you must flash with "Erase EFS" option, if there after still coz you OTP Block or illegal use then it would be due to Reason 2, try to flash with a Branded rom if you find your KS20 is Branded, try flash with a Unbranded rom if you find your KS20 is Unbranded.
How to restore .nv2 manually coz LGMDP said "cannot find any .nv2 file"?
To restore .nv2 manually by LGMDP Read this (from post #104 to #118):
http://forum.xda-developers.com/showthread.php?p=2531611#post2531611
Is there a way to flash Unbranded rom on Branded KS20?
Yes, but you need to do some modification to the rom, which we call the end up rom as "hybrid rom", it is very easy.
The details of that is explained in the following section
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Flash Unbranded rom on Branded KS20, method is invented by dorik2k
The rom of KS20 is normally in .dz format, with "DZExtract-V0.2" or "KS20 Kitchen" you can extract .dz rom into 10x .mdn files + 1x FLASH.bin
In order to flash your KS20 you have to either flash a ".dz file" or flash "10x .mdn files + 1x FLASH.bin"
FLASH.bin is the WM system rom, which can be used with both Branded and Unbranded .nv2 file
10x .mdn files should be something like radio rom, which will do the .nv2 check after flashing
Hence, if you have a branded .nv2 file you hv to flash with 10x .mdn from branded rom or if you have an unbranded .nv2 file you hv to flash with 10x .mdn from unbranded rom
In order to flash Unbranded rom in Branded LG KS20, you need two roms: 1 Branded rom and 1 Unbranded rom:
1. Extract the two .dz roms, and flash the .mbn files from Branded rom and the FLASH.bin from Unbranded rom
2. And then unlock the phone with lg_.exe (Normally, unlocking is only need at the first time you flash to Unbranded rom)
For lg_.exe, the unlocking procedure pls refer to this post:
http://forum.xda-developers.com/showthread.php?t=377127
"lg_.exe" Download link: http://rapidshare.com/files/99459711/ks20.rar
P.S. to use lg_.exe after flashing, you hv to do the settings in engineering menu and install WinDiag_Open.cab or import WinDiag.reg AGAIN
To extract .dz file, you have to use:
(i) DZExtract-V0.2 which will extract a .dz file into 10x .mdn files + 1x FLASH.bin, OR
(ii) LG KS20 Kitchen which has DZExtract-V0.2 built-in
That's
1x .dz file ==>> 10x .mdn files + 1x FLASH.bin (from Branded rom)
1x .dz file ==>> 10x .mdn files + 1x FLASH.bin (from Unbranded rom)
(i) DZExtract-V0.2 is developed by misterjp
http://forum.xda-developers.com/showthread.php?t=399249
Download link: http://www.sendspace.com/file/3auo4k
To operate DZExtract-V0.2
1. Unzip the contents of DZExtract-V0.2.zip on c:\DZExtract
2. Put the .dz file in that you want to extract c:\DZExtract
3. Start -> run -> cmd.exe
4. cd c:\DZExtract
5. c:\DZExtract>DZExtract -x "filename".dz (type without " ")
Then you will have 10x .mbn files + 1x FLASH.bin in c:\DZExtract
(ii) Alternatively, you can use option [a] in "LG KS20 Kitchen" to extract .dz rom (Easier)
http://forum.xda-developers.com/showthread.php?t=408280
To flash an Unbranded rom in a Branded KS20, you have to flash (1)+(2):
(1). All the 10x .mbn files (from Branded rom)
(2). FLASH.bin (from Unbranded rom)
Finally, Unlock your KS20 with lg_.exe
If your are still not clear with the steps, dorik2k has written a step by step guide in Post#3 below
Here is a WWE hybrid rom that made by me (for Branded phone only):
English-HK-10a + French-voda-10f Rom
http://www.sendspace.com/file/mik0rm
=======================================================================
LG Official ROM download list (thanks to ChuckyIT)
Unbranded KS20 can flash those Unbranded Official ROMs with no modifications need
Czech Mobile (may be Unbranded) 10a
http://www.megaupload.com/?d=2RFD0LKD
Czech Mobile (may be Unbranded) 10b
http://rapidshare.com/files/121522573/DZ-KS20-00-V10b-230-XX-MAR-19-2008_0.zip.html
English ESA Unbranded 10c
http://rapidshare.com/files/125736251/DZ-KS20-00-V10c-ESA-XX-FEB-19-2008_0.zip.html
English HKG Unbranded 10a
http://rapidshare.com/files/126667462/DZ-KS20E-00-V10a-454-XX-APR-29-2008_0.zip.html
English Turkey Unbranded 10d
http://rapidshare.com/files/144975512/DZ-KS20-00-V10d-286-XX-MAY-8-2008_0.zip.html
French Vodafone SFR 1.0b
http://rapidshare.com/files/104897585/KS20_V10b_FRANCE.rar.html
http://rapidshare.de/files/38512522/KS20.rar
French Vodafone SFR 1.0f
http://www.megaupload.com/?d=SIA9RU0U
French Unbranded 1.0f
http://www.megaupload.com/?d=IJ41O24V
Germany Unbranded 10a
http://www.megaupload.com/?d=STSO65F8
Germany Vodafone SFR 1.0b
http://rapidshare.com/files/104898146/KS20_V10b_GERMANY.rar.html
Germany Vodafone SFR 1.0e
http://rapidshare.com/files/89849482/DZ-KS20-00-V10e-262-02-JAN-21-2008_0.rar.html
Greece Vodafone 10b
http://rapidshare.de/files/38513206/ks20.rar.html
Greece Vodafone 10e
http://www.megaupload.com/?d=X1TD7SEC
Greece Vodafone 10g
http://rapidshare.com/files/125654764/DZ-KS20-00-V10g-202-05-APR-2-2008_0.zip.html
Italian TIM 10c
http://www.megaupload.com/?d=ER2O4XEN
NEU 10b
http://www.megaupload.com/?d=ZPJGT55D
Poland Orange 10c
http://rapidshare.de/files/38512825/KS20.rar.html
Russian 10b
http://rapidshare.com/files/104265532/DZ-KS20-00-V10b-CIS-RUSSIAN.zip.html
Russian 10d
http://rapidshare.com/files/154041606/DZ-KS20-00-V10d-CIS-xx-AUG-28-2008_0.zip.html
Traditional Chinese HKG Unbranded 10b
http://www.megaupload.com/?d=ISY3731M
=============================================================================
Useful Links for KS20
## HOT & FREE ## Unlock ALL LG KS20 here ##
http://forum.xda-developers.com/showthread.php?t=377127
[How To] Connect KS20 with LGMDP + Free Unbranded .nv2
http://forum.xda-developers.com/showthread.php?t=396032
LG KS20 Kitchen
http://forum.xda-developers.com/showthread.php?t=408280
[04Aug08] [Ks20] WM6.1 KisS20.2 Rom (OS 5.2.19965 Build 19965.1.2.3 ) UC [WWE|FR]
http://forum.xda-developers.com/showthread.php?t=408323
Support!!!
First I want to thank
- ChuckyIT for the roms
- raykisi for helping and supporting since the beginning
- peng8 for starting the route to the hybrid roms,
- misterjp for making DZExtract, which is mos probably the key to this method...
==============================================================
Step 0:
------------------------------------------
*** BACKUP YOUR NV2 FILE ***
If this is your first time flashing, don't do it before having your NV2 file at hand, otherwise you will have only a nice Windows Mobile device but not a phone...
First time flashers, be aware, flashing in emergency mode on first time, won't make automatic backup of nv2 file. In normal mode, LGMP will make an automatic backup of the file, so try this flashing in normal mode first, just to be sure.
Many people are complaining about the fact that they lost their IMEI number, and didn't make a backup of the NV2 file...
No one can help you guys, not until now...
And don't ask for somebody else NV2 file, it contains the IMEI number of the phone, which is unique for each one... Using same IMEI in two different phones could be illegal (or at least the phone company will notice and take action)...
Don't complain if anything goes wrong,,, do this at your own risk. You've been warned...
Step 1:
------------------------------------------
Basically this method consists of having 2 roms
1. branded rom (tested with french 10f)
2. english unbranded rom ChyckyIT
(see download links up at 1st post)
put them in 2 different folders......
Step 1a:
------------------------------------------
if your roms are in *.dz format (english rom is for sure), get the DZExtract tool (link up) and extract the roms in the different folders, then you should get 2 roms in mbn format, where each one of them consists of at least:
- many mbn files (10 probably), and some other files, take them as they are....
- 1 "flash.bin" file
To extract the dz files, the procedure is like this:
Put DZExtract.exe and zlib1.dll to each of the rom's folders, and for each of them type in the command prompt:
"C:\EN Rom\DZExtract.exe -x eng_rom.dz" ( without quotes, presuming you have your rom in folder "C:\EN Rom" and the dz file name is "eng_rom.dz")
Do this for the other rom too... for example:
"C:\FR Rom\DZExtract.exe -x french_rom.dz" (no quotes, presuming folder and file name obviously)
The dz rom, DZExtract.exe and zlib1.dll can be deleted in both directories after this step...
Step 2:
------------------------------------------
In the branded rom folder delete the "flash.bin" file (presuming "C:\FR Rom\flash.bin"), and replace it with the unbranded "flash.bin", the one you get from the english rom (presuming "C:\EN Rom\flash.bin")
for those really in need, type this in command prompt:
copy C:\EN Rom\flash.bin C:\FR Rom
After this you can delete the "C:\EN Rom" directory, or you can save it for backup... (but you won't need it in this process anymore)
Step 3:
------------------------------------------
Flash the branded folder files with LGMP_EURO, which obviously contains the unbranded english "flash.bin".
For flashing procedure see this post: http://forum.xda-developers.com/showthread.php?t=369481
If you are flashing in normal mode, LGMP should have make a backup of the NV2 file. Don't disconnect the phone until it finishes all the job. The program will restore it again after flashing finishes.
Step 4:
------------------------------------------
IF your phone was previously branded, you should restore the nv2 file (remember you made a backup, or the program made it automatically, and restoring will be made by the program itself after flashing finishes), and after that unlock the phone... (see unlocker file and procedures in "lg_.exe" above)
If your phone had an unbranded rom, you should be up and running already...
==============================================================
If everything goes right, you will have an unbranded english KS-20, perfectly working... enjoy it...
This method has not been tested with other roms, unbranded french for example... but if anyone does it, please post your results...
After flashing with unbranded rom, all other flashings on the phone with other unbranded roms will not require restoring nv2 file and unlocking. But please save your nv2 file somewhere...
For those stuck at the flashing process, if LGMP does not find your phone correctly, make sure you did all of these steps:
Installed LG USB Driver:
Download Link: http://rapidshare.com/files/99459712/LGCoronaUSBDriver.rar
At device:
- Enter this code to dialpad: 2676625720#
- Engeneering menu will show.
- Press:
Port Setting → 1. Diag Setting → 1. USB Set for Diag → “OK” → “Back”.
(Port Setting → 1. Diag Setting →) 2. USB Switching → “LG Composite -DUN, DIAG”.
- Press Done and reset your device.
If it still does not find the phone, take the file attached here and install it on the phone... after that restart, and LGMP should get the phone correctly
One important thing: No flash in emergency mode unless your KS20 is bricked.....because it will not backup / restore the .nv2 file!
Hello everyone!
Did anyone tried with the V10f unbranded to see if there is any speed or if the hardware graph accel is enabled???
( this v10f is newer than the branded one)
Also did anyone tried VOIP???
Thxs a lot
jeant said:
Hello everyone!
Did anyone tried with the V10f unbranded to see if there is any speed or if the hardware graph accel is enabled???
( this v10f is newer than the branded one)
Also did anyone tried VOIP???
Thxs a lot
Click to expand...
Click to collapse
everybody here got own phones, which cannot afford to flash everyday, or on every new comment or release...
Why don't you try,,, You have nothing to lose....
Also, if someone tries this method with different combination of roms please post your opinions...
jeant said:
Hello everyone!
Did anyone tried with the V10f unbranded to see if there is any speed or if the hardware graph accel is enabled???
( this v10f is newer than the branded one)
Also did anyone tried VOIP???
Thxs a lot
Click to expand...
Click to collapse
Yes, with this 10a HK ROM (ALREADY SAID: newer than the 10f SFR!) PointUI and iGo8 finally works! Voip (skype, Fring and so on) doesn't work yet
gregnapola said:
Yes, with this 10a HK ROM (ALREADY SAID: newer than the 10f SFR!) PointUI and iGo8 finally works! Voip (skype, Fring and so on) doesn't work yet
Click to expand...
Click to collapse
Err... pointui and iGo8 already worked fine on 1.0f SFR here.
They still work fine on the unbranded French rom by the way. We now need a 1.0g in English or French.
mathieulh said:
Err... pointui and iGo8 already worked fine on 1.0f SFR here.
They still work fine on the unbranded French rom by the way. We now need a 1.0g in English or French.
Click to expand...
Click to collapse
there's no error....I've never said Pointui and iGo doesn't work on 10f SFR...I wrote ONLY that 10a HK, whose release date is 2008-29-4, is NEWER than 10f SFR...I know IgO and Pointui work whith 10f ROMs, but this is the first (hybrid) english unbranded rom with pointui and iGo working
I've tried in vain to download the LGMDP from the rapidshare link. Is it possible to upload it somewhere else, eg. 4share?
weenween said:
I've tried in vain to download the LGMDP from the rapidshare link. Is it possible to upload it somewhere else, eg. 4share?
Click to expand...
Click to collapse
http://www.megaupload.com/?d=Y0FIW89S
arash3210 said:
http://www.megaupload.com/?d=Y0FIW89S
Click to expand...
Click to collapse
Thanks. I've finally got through to the rapidshare link (after 5 days of trying).
gregnapola said:
there's no error....I've never said Pointui and iGo doesn't work on 10f SFR...I wrote ONLY that 10a HK, whose release date is 2008-29-4, is NEWER than 10f SFR...I know IgO and Pointui work whith 10f ROMs, but this is the first (hybrid) english unbranded rom with pointui and iGo working
Click to expand...
Click to collapse
So how can you say that this rom is newer than 1.0f SFR (only the release date ?).
DomZ said:
So how can you say that this rom is newer than 1.0f SFR (only the release date ?).
Click to expand...
Click to collapse
New
adj. new·er, new·est
1. Having been made or come into being only a short time ago; recent: a new law.
2.
1. Still fresh: a new coat of paint.
2. Never used or worn before now: a new car; a new hat.
3. Just found, discovered, or learned: new information.
4. Not previously experienced or encountered; novel or unfamiliar: ideas new to her.
5. Different from the former or the old: the new morality.
6. Recently obtained or acquired: new political power; new money.
7. Additional; further: new sources of energy.
8. Recently arrived or established in a place, position, or relationship: new neighbors; a new president.
9. Changed for the better; rejuvenated: The nap has made a new person of me.
10. Being the later or latest in a sequence: a new edition.
11. Currently fashionable: a new dance.
12. New In the most recent form, period, or development.
13. Inexperienced or unaccustomed: new at the job; new to the trials of parenthood.
French Unbranded 1.0f release date: MAR-05-2008
French Vodafone 1.0f release date: FEB-19-2008
HKG 1.0a release date: APR-29-2008
OK ?
Since I haven't tried 1.0f SFR Rom (and I won't try it) I can't say you what are the differences between this one and the HKG .bin files; I know PointUI and other applications using PocketHal now work...
Your definition of the word "newer" definitively don't help us.
But i have found the answer by myself.
HK 10a : 5.2.1630
FR 10f : 5.2.1626
HK 10a is newer that FR 10f.
Build date is most important that the LG release version.
DomZ said:
Build date is most important that the LG release version.
Click to expand...
Click to collapse
(first post: )
raykisi said:
Note: English HKG Unbranded 10a is newer than English ESA Unbranded 10c with it's release date
Click to expand...
Click to collapse
Sure the definition doesn't help you... but it was the only meaning for me; otherwise I would used "improved" ROM, "upgraded" ROM... but I wasn't sure So, thank for your information about O.s. release
Now i'm trying to know which is the last microsoft wm6 revision.
The exact HK 1.0a revision number is 5.2.1630 (Build 18139.0.4.10).
Hi, I have set with ESA 10c, would like to flash it to HK English 10a or Traditional Chinese 10b, which one is newer? My phone hangs quite often, i hope by flashing it to a new version helps. Thanks!
I flash my ks20 with your custom rom and
all run perfectly, wifi, bt...
Perfect, thanks