Related
Hi alls
sory who can tell me detail for upgrade WM2003SE
Thank you
Ehh.. NO! :x
Do some SEARCHING!
This is one of the most talked about topics on this forum right now..
If you can post your search results and tell me that you STILL DON'T KNOW, then I will tell you how..
yes!
I don't know Can you tell me
thank you
....becareful....
1) Download Customized WM2003SE ROM - Asian Edition&
Customized WM2003SE Extended ROM - Asian Edition Version 2
Customized WM2003SE ROM - Asian Edition
http://forum.xda-developers.com/viewtopic....der=asc&start=0
+
Customized WM2003SE Extended ROM - Asian Edition Version 2
http://forum.xda-developers.com/viewtopic....r=asc&start=0
(2)copy the ms_.nbf of the 2nd ver and paste it to the 1st ver folder
(this will replace the ms_.nbf file of the first version)
(3) get your xda2 into bootstrap mode (reset switch + power button + directional button)before pls backup your file and ROM(do not use xbackup to backup your folder and file)...
(4) place your xda2 on the cradle, make sure your power cable is attached to the cradle and the cradle is attached to the usb port of your computer
(5) click on the file called "HimaUpgradeUt.exe"
(6) STRICTLY follow all instructions you see on your screen
(7) WAIT PATIENTLY until the screen says it is safe to remove your xda2 from the cradle
(8.) soft reset
(9) if you get to step #8, you're done!
Re: ....becareful....
Ok, ok! I have succesfully ROMupgrade to WM2003SE.
I 've downloaded 2.06 english version but there isn't good my bluetooth headset.
I 've downloaded WindowsMobile2003SE_XDA2_2.20.00CHS-translated.zip, so this is chinesse version and i've seen (i have seen squares instead of ) so many chinesse country character.
How can i correct this issue?
How can i downlad 2.2x english version or can i do xdaIIs WM2003SE to xdaII WM2003SE?
I wish there was a 2.2x English(not translated) version of WM2003SE for XDAII
thank you
i upgraded succesfully WM2003se
but not the photo contacts please help me and give advise
thank you alot
I uploaded the extended rom for the MDA PRO English. Nice touch, it contains Dutch T9.
it's in the upload directory, called mda_pro_nl_extrom.zip
ftp://xda:[email protected]/Uploads/mda_pro_eng_nl_extrom.zip
(adding it to this post gave an error message)
This file is only 1.5 MB?
I suppose it is not the full ROM image. What does it contain?
I am trying to revive a dead JasJar and wondering if this is the correct thing to load.
It is the Extended ROM, not the OS Rom, and will therefore only contains the English T-Mobile additions.
hi its only 1.28 mb..im guessing its not the full version.. can you poist teh full version tahnbks
@ Wiz,
would you know the actual application name of these cabs? I'm just wondering what are the included apps that are not in JasJar
** dont want to run each cab to see what's worth it or not
thanks!
How did you access to the extended rom? I tired to access to it in order to remove the Arabic support of my JasJar, but I cannot get it, the soft of my 9090 do not seems to work
Thanks !
I used www.ghisler.com Total Commander for PocketPC and typed in \Extended_Rom\ in the command line and pressed enter. I then copied everything to storage card
Could you please indicate which one installs the T-Mobile coloured dialer skin?
Another thing: there is no difference in available memory (both program and storage) after a hard reset with installing T-Mobile extended ROM or wihout installing extended ROM. This could be the case due to the fact that the installed software has approximately the same size as the CAB-files. As I have no access to the Extende ROM (nor Windows folder via ActiveSync) I am afraid that I am missing valuable memory after installing from the file of Wiz and that somewhere the CAB files still exist on my device. Does someone know where I can find (and delete) the Extended ROM and which CAB-files I should install and what the meaning is of each CAB-file?
Many thanks in advance
Wiz said:
I used www.ghisler.com Total Commander for PocketPC and typed in \Extended_Rom\ in the command line and pressed enter. I then copied everything to storage card
Click to expand...
Click to collapse
Ok it works thanks, but... it is on "read only" cannot erase some stuff
The Extended rom currently cannot be "unhidden" or "made writable". We need the experts from XDA Developers for this .... The only thing you can currently do is copy them to a storage card and install them manually.
Incidentally I was wrong about the file that does the T-Mobile dialer skin etc. The file that should not be installed manually is:
Enable_VT_RTPlugin_0727_2_signed.CAB,
(I justed tested and confirmed that myself
Hi wiz
cant access the link for the extended rom you have. can you please check and tell me how can i get that file?
thanks keep up the gr8 work
ftp://xda:[email protected]/Uploads/Universal/Extended ROMs/mda_pro_eng_nl_extrom.zip
MDA T-mobile
Please,
can anyone help me.. I received MDA T-mobile from Austria and it`s on German. How can I change it to English? If I have to install new Windows Mobile 2003se where can I find English version?
thanks
Re: MDA T-mobile
kopljas said:
Please,
can anyone help me.. I received MDA T-mobile from Austria and it`s on German. How can I change it to English? If I have to install new Windows Mobile 2003se where can I find English version?
thanks
Click to expand...
Click to collapse
what MDA :
MDA I
MDA II
.....
MDA PRO
you have to be a little more specific
MDA i (I-mate JAM)
MDA i (I-mate JAM)
Re: MDA i (I-mate JAM)
kopljas said:
MDA i (I-mate JAM)
Click to expand...
Click to collapse
then here is your forum. this is HTC Universal forum
http://forum.xda-developers.com/viewforum.php?f=27
good luck !
Wiz said:
The Extended rom currently cannot be "unhidden" or "made writable". We need the experts from XDA Developers for this .... The only thing you can currently do is copy them to a storage card and install them manually.
Incidentally I was wrong about the file that does the T-Mobile dialer skin etc. The file that should not be installed manually is:
Enable_VT_RTPlugin_0727_2_signed.CAB,
(I justed tested and confirmed that myself
Click to expand...
Click to collapse
Wiz!
Would it mean that If I take the corrsponding cab: Enable_VT_RTPlugin_0727_2_signed.CAB from the O2 XDAExec extended rom I would Get the Dialer scin form the O2 XDA EXEC ?
PLus can someone PLease upload the extended ROM from JASJAR.
Oh and something else which cab file is responcible for the MSN ?
does anyone know which file includes the T9 dutch?
I do not want the rest I only want the T9 on my mda-pro back again
well I beleive it is the t9dutch.ldb I can get it off my MDA PRo it is still with the crappy t-mobile ROM, if that helps let me know and give me your e-mail adress. But again I saw this file in the windows directory, so maybe I am wrong and you need the install for it
hee, guys.
Question: i want to change my rom and get rit off the tmobile skin and things.
so wich one can i use please help thanks
I have a mda pro tmobile simlocked
rom version 1.12.42 WWE
rom date 08/23/05
radio version 1.00.02
protocol version 42.33p8
Extrom version 1.12.125 WWE
hmm nobody???? 8)
Hi,
I changed my MDA Pro to the Qtek-Rom and the Radio to the 1.04.10
If you do so, also the language will be changed (from German to English) and the Keyboard-Layout ((Quertz to Querty) which you can resolve with some registry-hacks).
My device is running more stable and has more memory (Qutek is without any branding)
Teja
tjangoman said:
hee, guys.
Question: i want to change my rom and get rit off the tmobile skin and things.
so wich one can i use please help thanks
I have a mda pro tmobile simlocked
rom version 1.12.42 WWE
rom date 08/23/05
radio version 1.00.02
protocol version 42.33p8
Extrom version 1.12.125 WWE
Click to expand...
Click to collapse
I have the same PDA (MDA PRO T-Mobile Simlock) and i haven't ExtROM is normally?
Initially before put "1.12.125 WWE" what yuo have?
hee teja ,
so for me the next step is get the latest qtek rom and the Radio to the 1.04.10
and after that change some keys.
is it possible to explain me execly what i have to do because i am not familiar whit this software changing
you would help me allot
cheers
Will be no problem to help you - but this way I need some details:
Which kind of keyboard do you have? QWERTZ or QWERTY (look at your keyboard ant the first 5 letters are important).
You've to download the following files:
UNI_Qtek_WWE_11364_151_10300_Ship.exe
MaUpgradeUt_noID.exe
radio_1.4.10.zip
which all can be found at the ftp-server of the developers
ftp://[email protected]/Universal/
but you've to look in all folders (Roms + shipped Roms)
Make a new folder on your PC (maybe update)
Use WinRar to expand "UNI_Qtek_WWE_11364_151_10300_Ship.exe" to this folder
Copy "MaUpgradeUt_noID.exe" to "update"
Delete the radio.nbf in "update"
Expand "radio_1.4.10.zip" to "update"
REMOVE every card from your MDA (SD + SIM)!!!
Connect your MDA
Run "MaUpgradeUt_noID.exe"
if there is an error (mostly language...) run "MaUpgradeUt_noID.exe" again without changing everything!
After the update-prozess, you don't have to disturb the installation of the programs (it's only usefull stuff, no branding).
Change the key-respons from QWERTY to QWERTZ:
Use a registry-program like resco explorer with registry add-in and change the following key:
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Qwerty]
change: Layout from 66569 to 66567
You can also change the soft-keyboard, but I'll tell later because I've to go!
Good luck!!!
Teja
if you got
Now at home with MDA Pro:
Here is the link how to change the symols in the soft-keyboard:
http://forum.xda-developers.com/viewtopic.php?t=34398
Some things cannot be changed in the soft-keyboard but that's no matter!
Have a nice weekend,
Teja
Teja said:
You've to download the following files:
UNI_Qtek_WWE_11364_151_10300_Ship.exe
MaUpgradeUt_noID.exe
radio_1.4.10.zip
which all can be found at the ftp-server of the developers
ftp://[email protected]/Universal/
but you've to look in all folders (Roms + shipped Roms)
Click to expand...
Click to collapse
Hello Teja,
The site you give here requires password.
I looked here:
ftp://ftp.xda-developers.com/Universal/
But can't find the mentionned files.
Other thing did you perform a backup of your original ROM? If yes how?
Thank you
No, I didn't perform a backup, and I think it isn't possible at the moment.
Here are the direct links. Hope they'll work:
ftp://xdaupload:[email protected]/Universal/MaUpgradeUt_noID.exe
ftp://xdaupload:[email protected]/Universal/ROMs/radio_1.4.10.zip
ftp://xdaupload:[email protected] ROMs/UNI_Qtek_WWE_11364_151_10300_Ship.exe
Maybe you should copy the whole links in your browser and it'll work. I use firefox 1.5 and I'm able to browse on the ftp-server...
Have a nice week and good luck!
Teja
Thank you!
Hello Teja,
Those links are working fine.
Thank you!
Re: Thank you!
Lousticdr said:
Hello Teja,
Those links are working fine.
Thank you!
Click to expand...
Click to collapse
Sorry I made a mistake: I gave you the link for a old radio-update...
Here is the correct one (I also edited my post):
ftp://xdaupload:[email protected]/Universal/ROMs/radio_1.4.10.zip
If you've allready done the updates, you can make the radio-update without loosing any datas:
rename all *.nbf to *.old and copy the new radio-file in your update-folder. Run the MaUpgradeUt_noID.exe (maybe twice) again.
The MaUpgradeUt_noID.exe will only show the radio-update!
Just do it - after finishing, soft-reset your device (no hard-reset is necessary).
Enjoy the new update!
Teja
hee teja the first letters are qwerty and i have a mda pro tmobile simlocked
Ihave everything downloaded also the resco.
i don,t have to worry a bout stuck in the bootloader and things??
i,ll have to work so i am gonna give it a try tommorow.
thanks again 8)
rom version 1.12.42 WWE
rom date 08/23/05
radio version 1.00.02
protocol version 42.33.p8
EXTROM VERSION 1.12.125 WWE
Hey,
I first felt into Boodloader-Modus, but it was my own fault. It took a long time to solve the problem, but it was very easy:
REMOVE ALL CARDS FROM YOUR DEVICE! SD + SIM!
My one was "Net-Locked" and I've never heard about problems with "Sim-Locked" (but I always was not interested in)...
Teja
Error while radio/complete update
Hi,
today i tried to update the radio on my mda pro:
- I removed the SD and the SIM card.
- I did a reset
- I started the MaUpgradeUt_noID.exe 2 times
- the upgrade started but stayed on 0 % for 5 minutes
- then it stopped with an error and I still got the original version
I tried this 3 times and I even tried to do a complete update as it is suggested here and always got the same error message.
Can this be because of active sysnc, the virus scan program or the cable (although it is the original cable)? Do I need Active Sync for the upgrade or can I stop it somehow?
Hi,
it is suppost to close "Active Sync" (by Task-Manager) and to disable the firewall / antivirus, but I never had problems without doing so...
Is your MDA in BL-Modus when you want to update (blank screen) or is it still in "normal" modus?
Maybe you've the possibility to use an old computer/notebook without any programs running on?
Teja
Radio update problems
Hi again,
it is in blank screen mode - but if you look very closely (the backlight is off) the screen sys something like updating radio... please wait.
and what happens?
nothing happens - just an error after 5 minutes
I tried it with the bootloader mode afterwards and then it worked with the radio update. afterwards i tried the full update with bootloader screen - but it only worked the second time...
It's written in this topic that you've to run the update 2 times ==> so it works perfect! Congratulations!
Teja
Teja, thanks for your mini howto guide above. I am now installing the Qtek rom on my MDA Pro.
However you should realise that only germans use QWERTZ keyboard layout, the dude who started this topic is dutch, so am I, we use QWERTY. So the info on that part is somewhat useless.
But thanks again
(I am not responsible for any damage you might do to your device using this guide)
I tried flashing with the NoID tool several times, yet it always failed, or my Universal would not boot after the flash.
The regular T-Mobile update utility did work like a charm, and never failed on my. Thus I created a little tutorial on how to convert wrong ROMs to ROMs it will accept.
In this Example I will explain how to use an O2 XDA Exec ROM (and a different radio ROM) on a T-Mobile MDA Pro device
It's easiest to start with a clean directory to do all this as else it can get quite messy.
First, get the HTC64 Extended ROM Tool by Bal666 here:
http://buzzdev.net/component/option,com_remository/Itemid,100/func,fileinfo/id,196/
Next get an original ROM for your device, in my case I used the T-Mobile UK ROM as my device was english anyway.
For example, on the T-Mobile MDA Pro UK (or dutch) version, use "UNI_TMUK_11242_126_10002_Ship.exe" (find it yoursef)
Use WinRAR (http://www.rarlabs.com/) to unpack this file to a new directory called "Original", and unpack it again to a directory named "Converted".
The Original directory will be used to check things, and the Converted directory will be used to store all the roms that we have converted
Next we must find the ROMs we want to flash. I got "Xda_Exec_LaunchROM_v113139.exe" and Unpacked it in a directory named "O2", and "UNI_radio_1.08.00.rar" (from buzzdev.net) and unpacked it into "Radio Update".
First we must find out some things about our original ROMs. For each original ROM in the "Original" directory, follow the next steps:
- Open the HTC64 Extended ROM Tool
- Click Decode
- Open the ROM (.nbf file)
- Write down the values after "Operator Name" and "Language"
- Hit Cancel
Now we must modify the ROMs from the other distributions.
From the O2 directory we will use nk.nbf (OS) and ms_.nbf (Extended ROM), and from the Radio Update directory we will use radio_.nbf (Updated Radio ROM).
For each ROM you want to convert, follow the following steps:
- Open HTC64 Extended ROM Tool
- hit Decode
- Open the ROM
- In "Operator Name" and "Language" fill in what you wrote down earlier
- Hit Decode
- (on the begin screen) Hit Encode
- Open the .prj file you just created (same name as ROM, but with extensio .prj)
- Hit Encode
- if asked "Overwrite existing ROM", choose "Yes"
- if asked "Fat16 file is too large", choose "OK"
- When done, copy the over-written .nbf file from the directory you created it in (like O2 or Radio ROM) to the Converted directory. Choose to overwrite the existing file.
When all is done, run the ROMUpgradeUT.exe in the Converted directory, and follow the instructions.
If all goes well, you should have upgraded your ROM without having to CID-Unlock or use NoID tools that were originally made for another device
If before the actual upgrade your PC says it has found an unrecognized USB Device, close the RomUpgradeUT.exe with task manager (ctrl+alt+del), and reset your device (push the stylus in the hole at the backside). Then re-run the ROMUpgradeUT.exe
Credits go to iruja because he helped me find these tool
Let me know if it also worked on your device
EDIT: Stupid me, HTC64 Extended ROM Tool is by bal666
EDIT2: Note on "Unrecognized USB Device"
EDIT3: Added credits
Nice Job! Good, Clear and informative instructions.
he, leuke guide, die ken ik ergens van
Nice people like my way, this is the same way I test different roms for the wizard, without having to cid unlock the phone and loose warranty
Thank you "TheBlasphemer"
wow, I searched this forum for a few hours trying to understand how to install roms from other developers onto my Universal. It was driving me insane cause i kept on recieving country id errors. I found your post and was delighted to find how easy it really is to upgrade roms. Thank you for helping people like me who have no clue. Thanks, Thanks and More thanks. I also give shout outs to all others in this forum who take time to help others. XDA Developers is awesome! I'm surprised that developer sites dont link to xda developers for their customers. It would save them alot of time and money. Peace
Great Instructions
Many thanks for the great instructions.
I tried to flash my T-Mobile MDA Pro to the latest i-Mate rom and it became stuck in the Bootloader mode (I used the No-ID tool, and tried every type of reset). Fortunately this approach works, and I'm now the proud over of an much faster PDA.
Rom: 1.30.68 WWE 02/08/06
Radio: 1.09.00
Protocol: 42.42.P8
ExtRom: 1.30.153 WWE
The original T-Mobile Rom sucks compared to these i-Mate Roms
http://forum.xda-developers.com/viewtopic.php?t=42743
Excellent
Crystal clear instructions. worked like a charm once I found the Orange operator code is ORANG007. The "Orange" ROM on ftp appears to be a hash of 3 other versions as the operator names are QTEK001 and CDC__ something or other....
Thanks again for the excellent, no hassle upgrade method!
This procedure will be working on MDA Vario (QTek9100) ?
I have a QTEK 9000 that is in Spanish OS. There is no available downloadable shipping ROM so how do i get the values of Operator Name and Language? Are they in the registry=?
Tried this on my MDA pro NL which is stuck in boot screen, but no dice
I used however the init UK rom from T-mobile, not the NL which was my official one. I don't have a NL so I maybe if I use that one, it'll work, but Im afraid not
Viper, I also have a NL version and would like to upgrade my MDA...did you have any luck doing so or did you find the original dutch ROM?
(A stupid question: when I upgrade my rom, i assume that all my data is lost, right?)
Just wondering did you all upgrade your devices with the exe that came with the new ROM, or the one that comes from the phone vendor? :roll:
Kinda wondering should I use the one that comes with the QTek ROM, or should I use the one that came with the Dopod ROM (mine's a Dopod)
wow, how easy was that
the orange updater from the net (M5000_email.exe M5000) creates a temp directory called
\Local Settings\Temp\pft3CA.tmp\
run the orange updater program so it extracts the files, DONT CLOSE IT, leave it at the point where you make it update (don't hit next)
now follow the steps of the OP
simply decode your chosen rom, encode them with the correct info, then overwrite the roms in the temp directory with your required ones
then let the orange app install 'em for you!
took me 10 min to make my radio only to 1.09
hi guys
my MDA Pro dead, only show boot mode. i can't turn on my phone. i'm using all rom files. but no result. please help me how repar my phone. i'm use then solution no result. i can't change my phone lang. detect phone show only empty info. help me pleaseeeeeeeeeeeeeeeeeeee
siemens man??
why that name, do you work for 'em?
hi guys
thank you for reply mail. all problem solved. now good working
thanks to Buzz
Thank you verry much i'm verry happy with the Qtek-ROM (radio of Dopod 900) instead of the T-mobile rom
And now I have MSN
Im going to upgrade my MDA PRO tonight using the instrutions in this thread, but which is the best ROM to update it to? i suppose i would like push mail and msn messenger/hotmail.
also is there a slightly more stable internet browser in the ROMS? my current IE is not very good, and opera has the habbit of coming up with a not enough storage memory in dll error!
XDA EXEC is dead
I received my xda exec two days ago. I've tried the ROM upgrade as described. ROMUpgradeUT went OK. When I cold boot my device I get two options - Press 0 to restore factory default Press X to exit. Neither have any effect and the exec seems to be dead. Can someone help out or suggest a fix please?
It's alive !!!
Managed to get the exec in boatloader mode, plugged in usb and reflashed it with an original O2 rom, which, thankfully revived it. I still would like to find out what went wrong with the original ROM upgrade and why it 'killed' the exec. I followed the instructions to the letter. My orignal pre-installed ROM was a 1.13.82 (11/30/05), Radio 1.04.02, XROM 1.13.188. I tried to upgrade to JASJAR ME 1.30.82 171 10900 WWE ship ROM, which effectively turned my exec into (I quote) 'a very expensive paperweight'. I now have got it working with an older O2 original ROM (ROM 1.13.48 (09/19/05), Radio 1.04.02, XROM 1.13.139). When I tried to flash I overwrote the 'original' (ROM 1.13.48 (09/19/05), Radio 1.04.02, XROM 1.13.139) with the modified ROM, RADIO and XROM files from the JASJAR version, I didn't replace any dll files. Could this be the problem or am I way off target? Can anyone spot were I messed up here. Tonight I will try with another JASJAR upgrade, now that I know I can safely reflash with an oringal O2 ROM.
anyone know where i can get ROMUpgradeUT.exe tool from?
i don't know if this is the right section, but i'll try :
does anyone have the german Windows Moile 5 Upgrade (!not the A02-Update from the dell-page) from german WM2003SE to WM5.
It has been sold on CD, but not anymore available.Can anyone share the german A00 (or is the first A01?) WM5-Upgrade-ROM for me?
anyway. Satani (if you are still reading these)
I checked you asked at aximsite and got no answer. Not the one you were looking for.
I replied there but I am gonna do it here:
hi satani.
From what I have read in xda-forums. There is a different bootloader from WM2003SE to WM5_A02. So if the SD loader method can work over different languages version (I think it should). I think you should do the following:
1. Change your WM2003SE German to WM2003SE English (SD Loader method).
2. Upgrade WM2003SE English to WM5_A01 English (Normal method)
3. Change WM5_A01 English to WM5_A02 ENGLISH (Normal method). Now you will have the new bootloader.
4. WM5_A02 English to WM5_A02 GERMAN (SD Loader Method).
Now your job is to find the different Upgades either on official Dell website or somewhere else...
That may work but I can't confirm and I don't know if that would brick your axim.
Just read the thread about the SD Loader method.
Hope that helps. Cheers
juanpa74 said:
anyway. Satani (if you are still reading these)
I checked you asked at aximsite and got no answer. Not the one you were looking for.
I replied there but I am gonna do it here:
hi satani.
From what I have read in xda-forums. There is a different bootloader from WM2003SE to WM5_A02. So if the SD loader method can work over different languages version (I think it should). I think you should do the following:
1. Change your WM2003SE German to WM2003SE English (SD Loader method).
2. Upgrade WM2003SE English to WM5_A01 English (Normal method)
3. Change WM5_A01 English to WM5_A02 ENGLISH (Normal method). Now you will have the new bootloader.
4. WM5_A02 English to WM5_A02 GERMAN (SD Loader Method).
Now your job is to find the different Upgades either on official Dell website or somewhere else...
That may work but I can't confirm and I don't know if that would brick your axim.
Just read the thread about the SD Loader method.
Hope that helps. Cheers
Click to expand...
Click to collapse
nice to see, some people are making 'cross-references'...
so i found http://www.todaysppc.com/blog/?id=axim_user&uid=kjd2338&no=330 this link at the WM6 for x50v discussion, on this site, there is an archieve someting like : http://axim.kangjang.net/AximX50v_WM5_A01_EN_fr2k3.rar, it seems, this site site sais, you can put the WM5-bootloader n SD, too and after that upgrade to an english WM5. Is that right? (or did i misunderstand something, as i dont speak such 'cryptic' language as Jap or Cinese...
I can just tell you what i did. I upgraded my X50v to WM5_A03 on this thread: http://forum.xda-developers.com/showthread.php?t=313081
I followed the information by maglite there. Mine was English.
For what I read here: http://forum.xda-developers.com/showthread.php?t=322498
There wasn't a bootloader different from WM2003SE to WM5:
WM2003SE and WM5_A01 (or is it A00?) had the same bootloader.
WM5_A02 came with a different bootloader which is the same one to WM5_A05 & WM6.
Or maybe WM2003SE and WM5_A01 have different bootloaders but also WM5_A02 came with different bootloader from WM5_A01.
It was long thread now I can't remember.
Sorry I can't help you more.
well, i tranlated the last page given from my last post and corresponding to this, it is possible to upgrade directly to WM5 using SD-Flash : all i need to do is, following the steps, shown there. (here i have a question : ist the 'action'-button the button in the middle of my movementkeys?) and then i may follow, this guide. (a clear english-version is giving at aximsite, which is nearly the same threat with the differeence, that at those page, the downloads are working and they offered and wm5-rom with wm2003se-bootloader.) I'm about to try this out : but
well referring to this page, there is a difference between the bootloaders (WM2003SE uses DiMa-loader unless WinMobile 5 uses a WM5-one., but a WM2003-bootloader is included in the above mentionned file)
first my rescue-questions :
may i go backt to my current (or another) rom?
what is the action-button?