Develop Bugs

looking for upgarde for the xda2i

I have a xda2i with the following info
ROM version 1.10.00 WWE
ROM date 12/24/04
radio version 1.00.00
protocol version 1337.39
ExtRom 1.10.124 WWE
I am looking a for a upgraded version if anyone can help... it would be great if there was a wa to get rid of the o2 custom stuff on the xda too i dont like that too much can anyone help
Acid

At the moment there are no updates for the XDA2i but there is rumours of one in the pipelines... if its true or not remains to be seen but we can only hope.
As for removing the customised crap just do a hard reset (you'll loose all your stuff) , press power + reset.
Then when its installing a box will appear asking "Personal" or "Corporate" user, choose the corporate option and enter the password "0506"

hi
at the moment the only newer rom from our factory rom is that of pda2k.. do a search for my posts and in there you will see where to get it and how to get past the country id error..

Danny-B- I didnt see the box will appear asking "Personal" or "Corporate" user it just says will customize my xda in 3 seconds and i cant do anything to stop it and i cant even uninstall the software it is linked into everything.. its really annoying and this o2 thing is just eating up memory and space... can you help
Acideax
I have a xda2i with the following info
ROM version 1.10.00 WWE
ROM date 12/24/04
radio version 1.00.00
protocol version 1337.39
ExtRom 1.10.124 WWE

Are you sure you didnt miss it ?
Im sure it auto installs personal user if not selected within a certain time.
The best thing to do would be, Hard reset it, then just sit and watch it install till it gets to the choice point.
Another thing that might be slowing your device down can be the SD card if its over 512Mb , the XDA 2i sems to have a slight problem with them and slows everything down, well it does in my case anyway.

rom
my xda2 i spec.
rom version-1.11.00 wwe
rom date-01/27/05
radio -1.00.00
protocol-1337.39
ext rom version-1.11.923 wwe

XDA2i & WM2005 ?!?
HI !
I´m using the XDA2i / O2-Germany with WM2003SE..
ROM 1.11.01GER
Ratio 1.03.00
Protokoll 1337.42
ExtROM 1.11.132GER
I´ve tried to upgrade to WM5 but...
HimaUpgradeUt.exe 1.2.0.0
nk.nbf 1.50f
WM 2003 ROM Image Editor 1.4.26
the firste tries I´ve got ERROR: wrong device, so I changed the devicetype from PH10 to PH10C like written on start-settings-deviceinformations...
I´ve tried again...
I started HimaUpgradeUt.exe and after a few sec. the screen say´s "deviceinformations: XXX
XXX
ROM XXX
Image info´s XXX
.....
if I press UPGRADE the massage "don´t remove USB & power" appiers then a new screen with the status for the upgradeprocess....
BUT... after 20 sec. I always get ERROR 101 (connectionerror).
- any idea ?

The XDA2i does not support the leaked WM2005 it only works on the XDA 2
Although the devices look the same the internal hardware is different.

The XDA2i does not support the leaked WM2005
sad to hear that...
ok, thank you but do you know if it´s possible to get an upgrade in the future ?
do you know where the problem is? (Image ore Updatesoftware?)
???!!!

The problem is that the software (wm2005) has to be custom made to suit the hardware in the phone so ... HTC - the makers of the phone or O2 would have to "build" the software for the phone.
Its because all the correct drivers and such have to be correct for the device to function.
But you never know, it might be a possible upgrade in the future, youll just have to wait and see.

Upgrade for XDA2i
Ok, I´ve found an original Upgrade-Tool & the Rom-files from o2UK....
My next Problem is the Password to edit the nk.nbf to chage the Image...
I´m using WM 2003 ROM Image Editor 1.4.26
Xda IIi ROM v 1.10.124 (43.6MB) - english
AlUpgradeUt.exe 2.0.0.1
when I start the upgrade I always get the
"ERROR 120: COUNTRY ID ERROR".... that´s because I have the
o2 - Germany device...
Can somebody help me to findout the right password for the Rom-editor ?
[/b]

want to have the latest rom i have now tmobile mda pro

hee, guys.
Question: i want to change my rom and get rit off the tmobile skin and things.
so wich one can i use please help thanks
I have a mda pro tmobile simlocked
rom version 1.12.42 WWE
rom date 08/23/05
radio version 1.00.02
protocol version 42.33p8
Extrom version 1.12.125 WWE

hmm nobody???? 8)

Hi,
I changed my MDA Pro to the Qtek-Rom and the Radio to the 1.04.10
If you do so, also the language will be changed (from German to English) and the Keyboard-Layout ((Quertz to Querty) which you can resolve with some registry-hacks).
My device is running more stable and has more memory (Qutek is without any branding)
Teja

tjangoman said:
hee, guys.
Question: i want to change my rom and get rit off the tmobile skin and things.
so wich one can i use please help thanks
I have a mda pro tmobile simlocked
rom version 1.12.42 WWE
rom date 08/23/05
radio version 1.00.02
protocol version 42.33p8
Extrom version 1.12.125 WWE
Click to expand...
Click to collapse
I have the same PDA (MDA PRO T-Mobile Simlock) and i haven't ExtROM is normally?
Initially before put "1.12.125 WWE" what yuo have?

hee teja ,
so for me the next step is get the latest qtek rom and the Radio to the 1.04.10
and after that change some keys.
is it possible to explain me execly what i have to do because i am not familiar whit this software changing
you would help me allot
cheers

Will be no problem to help you - but this way I need some details:
Which kind of keyboard do you have? QWERTZ or QWERTY (look at your keyboard ant the first 5 letters are important).
You've to download the following files:
UNI_Qtek_WWE_11364_151_10300_Ship.exe
MaUpgradeUt_noID.exe
radio_1.4.10.zip
which all can be found at the ftp-server of the developers
ftp://[email protected]/Universal/
but you've to look in all folders (Roms + shipped Roms)
Make a new folder on your PC (maybe update)
Use WinRar to expand "UNI_Qtek_WWE_11364_151_10300_Ship.exe" to this folder
Copy "MaUpgradeUt_noID.exe" to "update"
Delete the radio.nbf in "update"
Expand "radio_1.4.10.zip" to "update"
REMOVE every card from your MDA (SD + SIM)!!!
Connect your MDA
Run "MaUpgradeUt_noID.exe"
if there is an error (mostly language...) run "MaUpgradeUt_noID.exe" again without changing everything!
After the update-prozess, you don't have to disturb the installation of the programs (it's only usefull stuff, no branding).
Change the key-respons from QWERTY to QWERTZ:
Use a registry-program like resco explorer with registry add-in and change the following key:
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Qwerty]
change: Layout from 66569 to 66567
You can also change the soft-keyboard, but I'll tell later because I've to go!
Good luck!!!
Teja
if you got

Now at home with MDA Pro:
Here is the link how to change the symols in the soft-keyboard:
http://forum.xda-developers.com/viewtopic.php?t=34398
Some things cannot be changed in the soft-keyboard but that's no matter!
Have a nice weekend,
Teja

Teja said:
You've to download the following files:
UNI_Qtek_WWE_11364_151_10300_Ship.exe
MaUpgradeUt_noID.exe
radio_1.4.10.zip
which all can be found at the ftp-server of the developers
ftp://[email protected]/Universal/
but you've to look in all folders (Roms + shipped Roms)
Click to expand...
Click to collapse
Hello Teja,
The site you give here requires password.
I looked here:
ftp://ftp.xda-developers.com/Universal/
But can't find the mentionned files.
Other thing did you perform a backup of your original ROM? If yes how?
Thank you

No, I didn't perform a backup, and I think it isn't possible at the moment.
Here are the direct links. Hope they'll work:
ftp://xdaupload:[email protected]/Universal/MaUpgradeUt_noID.exe
ftp://xdaupload:[email protected]/Universal/ROMs/radio_1.4.10.zip
ftp://xdaupload:[email protected] ROMs/UNI_Qtek_WWE_11364_151_10300_Ship.exe
Maybe you should copy the whole links in your browser and it'll work. I use firefox 1.5 and I'm able to browse on the ftp-server...
Have a nice week and good luck!
Teja

Thank you!
Hello Teja,
Those links are working fine.
Thank you!

Re: Thank you!
Lousticdr said:
Hello Teja,
Those links are working fine.
Thank you!
Click to expand...
Click to collapse
Sorry I made a mistake: I gave you the link for a old radio-update...
Here is the correct one (I also edited my post):
ftp://xdaupload:[email protected]/Universal/ROMs/radio_1.4.10.zip
If you've allready done the updates, you can make the radio-update without loosing any datas:
rename all *.nbf to *.old and copy the new radio-file in your update-folder. Run the MaUpgradeUt_noID.exe (maybe twice) again.
The MaUpgradeUt_noID.exe will only show the radio-update!
Just do it - after finishing, soft-reset your device (no hard-reset is necessary).
Enjoy the new update!
Teja

hee teja the first letters are qwerty and i have a mda pro tmobile simlocked
Ihave everything downloaded also the resco.
i don,t have to worry a bout stuck in the bootloader and things??
i,ll have to work so i am gonna give it a try tommorow.
thanks again 8)
rom version 1.12.42 WWE
rom date 08/23/05
radio version 1.00.02
protocol version 42.33.p8
EXTROM VERSION 1.12.125 WWE

Hey,
I first felt into Boodloader-Modus, but it was my own fault. It took a long time to solve the problem, but it was very easy:
REMOVE ALL CARDS FROM YOUR DEVICE! SD + SIM!
My one was "Net-Locked" and I've never heard about problems with "Sim-Locked" (but I always was not interested in)...
Teja

Error while radio/complete update
Hi,
today i tried to update the radio on my mda pro:
- I removed the SD and the SIM card.
- I did a reset
- I started the MaUpgradeUt_noID.exe 2 times
- the upgrade started but stayed on 0 % for 5 minutes
- then it stopped with an error and I still got the original version
I tried this 3 times and I even tried to do a complete update as it is suggested here and always got the same error message.
Can this be because of active sysnc, the virus scan program or the cable (although it is the original cable)? Do I need Active Sync for the upgrade or can I stop it somehow?

Hi,
it is suppost to close "Active Sync" (by Task-Manager) and to disable the firewall / antivirus, but I never had problems without doing so...
Is your MDA in BL-Modus when you want to update (blank screen) or is it still in "normal" modus?
Maybe you've the possibility to use an old computer/notebook without any programs running on?
Teja

Radio update problems
Hi again,
it is in blank screen mode - but if you look very closely (the backlight is off) the screen sys something like updating radio... please wait.

and what happens?

nothing happens - just an error after 5 minutes
I tried it with the bootloader mode afterwards and then it worked with the radio update. afterwards i tried the full update with bootloader screen - but it only worked the second time...

It's written in this topic that you've to run the update 2 times ==> so it works perfect! Congratulations!
Teja

Teja, thanks for your mini howto guide above. I am now installing the Qtek rom on my MDA Pro.
However you should realise that only germans use QWERTZ keyboard layout, the dude who started this topic is dutch, so am I, we use QWERTY. So the info on that part is somewhat useless.
But thanks again

BA post upgrading problem.

--------------------------------------------------------------------------------
Hi, im newbe so, please be patient.
4 days ago i've upgraded mi qtek 9090 frow win 2003 se to win mobile 6 but i have some problem
the phone module is not working anymore ( it's no possible to turn phone on)
the pda do not save the gps settings after it discover by blutooh ( every time i turn off the gps reciver and turn on again i have to set again the serial port, the passkey etc ).
i've tryed to upgrade the radio but i'm not able do download file from ftp at the following link because ftp doesn't work:
ftp://xda:[email protected]_11500.exe
at the moment my configuration is:
rom vers 5.60.00.wwe
rom date 03/02/05
radio verison 1.13.00
protocol version 1.337.42
ext rom version none
at the time im writing it seems that phone module is working again( ghosts in my pda ? )....anyway
can someone help me suggesting something or can someone send my the file i need to upgrade my radio or blutooh version (if this can help ) by email?([email protected])
thank you in advance and sorry 4 my english.

hi, i've upgraded the blutooth version ( now i have 2 blutooth icons in my connection task ) but i'm not able to upgrade the radio version.
i have used 2 method [ Quick/EasyTYPE II and Second Methord Type I ] but it return an error that says that the upgrade is not compatible with my device.
i'have tryed to search for a shipped rom but i was not able to find one compatible with my pda.
thx
could someone indicate me a correct shipped rom that can i use for the radio upgrade?
at the moment i'm using
rom vers 5.60.00.wwe
rom date 03/02/05
radio verison 1.13.00
protocol version 1.337.42
ext rom version none

sorry guys but is very difficult for me to find the right rom for my VODAFONE 1620.
my getdevicedata says: P H 2 0 B 2W W E
5.60.00NONE4%4
please can someone suggest me a rom that is more useful ( stable/best ) than the actual
i'm not able to understand witch one should i use.
thx in advance.

pls, help...

All device info gone ???

Hey,
I'm pretty new at this, so I'll explain how i've gotten in to this.
1. Bought a HTC tytn UK and I wanted it in dutch
2. Since I couldn't find an original rom i flashed it to the dutch rom from shap's (wich is actually great)
3. Then i did find an original rom but wasn't able to flash it so i used "HTC Hermes SIM & CID Unlock - v3a"
4. The original dutch rom works fine now, except when i go to device info
Rom version: empty
Rom date: empty
Radio version: empty
Protocol version: empty
CPU: 8 squars
speed: 6 squarsBe...
No imei number and so on.
Can someone please help me, maybe in the future when i try to sell the phone this must be ok.
Thx a lot to all xda developers here !!!
edit: original bootloader and ipl were: SPL-2.05 IPL-1.04 (maybe it has something to do with that?)

roeldm said:
Hey,
I'm pretty new at this, so I'll explain how i've gotten in to this.
1. Bought a HTC tytn UK and I wanted it in dutch
2. Since I couldn't find an original rom i flashed it to the dutch rom from shap's (wich is actually great)
3. Then i did find an original rom but wasn't able to flash it so i used "HTC Hermes SIM & CID Unlock - v3a"
4. The original dutch rom works fine now, except when i go to device info
Rom version: empty
Rom date: empty
Radio version: empty
Protocol version: empty
CPU: 8 squars
speed: 6 squarsBe...
No imei number and so on.
Can someone please help me, maybe in the future when i try to sell the phone this must be ok.
Thx a lot to all xda developers here !!!
edit: original bootloader and ipl were: SPL-2.05 IPL-1.04 (maybe it has something to do with that?)
Click to expand...
Click to collapse
1) you need to flash HardSPL
2) make sure you have flashed a new radio after using the CID/SIM unlocker, due to the fact that it downgrades it to a very old radio for it to work.

I had this issue when I tried a version of HTC Home Customizer that I found somewhere on the net.
To make it all come back, I had to hard reset, and not reinstall the program that caused it. I'm not sure if any other programs could cause that issue, or why it was caused.

I've flashed my device to HardSPL. now wich radio rom should I use?
I've found several radio rom but I don't have a clue wich one is best for me (Belgium, Mobistar)

flash a shipped ROM from here, there is a dutch HTC from there. get to boot loader, pressing the ok on the left, power on right, and stick stylus in at the same time. plug it to active sync, and run the exe file from the WM 6 rom upgrade/downgrade.

How to downgrade HTC Universal Rom WM6.x to HTC Universal Original WM 5 ROM

Hi. guys.
How Can I downgrade my O2 Exec from ROM 8.2 Tomal to its original ROM WM5 (O2 Exec)
Should I Use task 28 55a first?
And then use WM5 ROM 1.13 (O2 Exec) and then upgrade to WM 5 Rom 1.30 (O2 Exec), or just straight use WM 5 ROM 1.30 (O2)?
Is the SIM locked?
Could someone tell me step by step?
Thx, a lot guys.
Now I'm :
O2 Exec G4 64Mb
WM 6.1 ROM 8.2 Tomal
Radio ROM 1.15

Hello,
I downgrade from Tomal/Ranju v7.7 WM6.1 and Tomal/Ranju v8.2 WM6.1 to WM5 - O2 1.30. 162
1) Original O2 1.30.162 WM5 rom unpack in RAR.
ROM, radio and ExtRom (in Rar Folder "OutPutFile") files copy to Universal RUU - CID Checking bypass.
Code:
http://forum.xda-developers.com/showthread.php?t=301662
2) Give Uni to Bootloader mode - Active sync must be not active. Synchronizacion is not active.
(Bootloader mode - holding the BACKLIGHT_BUTTON and the POWER_BUTTON and then pressing the RESET button)
3) Plug Uni to PC and wait for Win detect Uni.
4) Run RomUpgradeUt.exe and flash O2 rom, radio, extrom
Its works.
Or read Wiki
P.S sorry my English

antonny said:
Hi. guys.
How Can I downgrade my O2 Exec from ROM 8.2 Tomal to its original ROM WM5 (O2 Exec)
Should I Use task 28 55a first?
And then use WM5 ROM 1.13 (O2 Exec) and then upgrade to WM 5 Rom 1.30 (O2 Exec), or just straight use WM 5 ROM 1.30 (O2)?
Is the SIM locked?
Could someone tell me step by step?
Thx, a lot guys.
Now I'm :
O2 Exec G4 64Mb
WM 6.1 ROM 8.2 Tomal
Radio ROM 1.15
Click to expand...
Click to collapse
As fas as I know, is exaclty the same process, just reflash as normal with the ROM desired
Good luck,

Thx a lot
Thx, a lot svobi and orb3000
Hope it will return my O2 Splash logo which is missing because I use task 28 55a.
Now I must download WM5 ROM 1.30 which is +- 60MB

?
Is there Internet Sharing in WM 5.0?
Is WM 5.0 ver 1.30 is the latest WM 5.0 for O2?
Is my PIM backup WM 6.1 compatible with WM 5 ROM 1.30?
Thx a lot, guys.

antonny said:
Is there Internet Sharing in WM 5.0?
Is WM 5.0 ver 1.30 is the latest WM 5.0 for O2?
Is my PIM backup WM 6.1 compatible with WM 5 ROM 1.30?
Thx a lot, guys.
Click to expand...
Click to collapse
no
yes
no

How to backup contact&appoinment from WM 6.1 to WM 5
Thx, Tin2404.
So is there a program to backup my contact & appoinment from WM 6.1 to WM 5?
Thx.

Internet Sharing program for WM 5.0
How to make internet sharing for WM 5?
Is there a program cab file internet sharing for WM 5?
Thx.

antonny said:
Thx, Tin2404.
So is there a program to backup my contact & appoinment from WM 6.1 to WM 5?
Thx.
Click to expand...
Click to collapse
Microsoft ActiveSync + Outlook - synchronize with PC.
Synch. with WM6.1 (contact, mails, appoinment, calender, notes make copys to PC) after downgrade to WM5 synch. again (all this copy back from PC to Uni with WM5).
Its works. I flash more roms and ever become all from outlook back to Uni. It does not matter WM5,WM6 or WM6.1 for outlook.

Extended Rom
Hi, guys, finally I have successfully downgrade from WM 6.1 (Tomal 8.2) to WM 5 (ROM 1.30 O2 Exec).
I use RUU tools, and copy Radio ROM, Ext ROM RO, and CE ROM too it.
But something brother my mind:
1. why my Ext ROM version empty. (In Setting, Device Information). Is this normal?
2. And is this normal, in this ROM no O2 tools?
Thx, a lot guys.

Wm5 - O2 1.30. 162
hi, where did u find the original WM5 - O2 1.30. 162 rom files,
i looked online and they were removed from my-xda website
a link would be helpful
thanks

The Final Conclusion
Hi, guys.
After doing some flash from WM5 to WM6 and WM 6 to WM 5, etc,
I finally succeed again to flash my O2 Exec to its original ROM WM 5 (O2 ROM 1.30) and fully functional...
Mine Is :
O2 XDA Executive (HTC Universal)
G4 (bootloader 2.01)
64 MB RAM
Here's my conclusion:
I'll make it step by step : (Please Do It with Ur Own risk, it success to me, maybe not to the others...)
1. Run PPCPIMBacup.exe (ver2.5) to bacup Ur contact, appoinment, and tasks), save it to Ur SD Card.
2. Download RUU tools from forum.xda-developers.com. Search for it.
After that, extract it to a new folder, let's say "RUU_WM5"
3. Download O2 ROM 1.30 (.exe) from buzzdev.net. Search it under download section. U must register first to download. (It's free )
4. Run O2 ROM (.exe), but don't click next. (cause we're only want to take 3 files : nk.nbf, radio.nbf, and ms_.nbf only from temporary directory in "/Document and Settings/").
Open Windows Explorer, run search to find that 3 files. U just need search one of these files, if U found, than the others files are in the same directory that U found the one. After U found them, copy 3 files to "RUU_WM5" folder.
5. Download Mtty program, too from buzzdev.net
6. Use Mtty (Mine is ver 1.4x) from buzzdev.net :
- Disable active sync
- Make Ur Universal in bootloader mode
- connect Ur Universal to USB
- run mtty, choose USB
- type : task 28 55a
- enter, and than U'll see USB)
- Unplug Ur Universal and do soft reset
(U'll see nothing in the screen, don't
panic.) after that push the combination
button to enter bootloader mode again.
- Plug again Ur Universal to USB
Very Important Note :
a. Use Mtty is very risky, please do it with
very carefully and prepare for the worst
risk... brick the Universal...
Do it with Ur own risk..
Ur bootloader I think must 2.01 or 1.1 (I
think...)
b. task 28 55a is to clear the storage of
Universal to its original state, like U want to
format the new Hard Disk to make clean
Install of new Windows
7. Run Rom Upgrade Utility (.exe) from "RUU_WM5" Folder. And Wait until it finished, about +- 20 minutes, and do hard rest, press 0.
8. Hoopla, The ROM WM 5 is running for the first time, wait until it insatll all the 3rd components from O2... it restart again for one more time, and then finished. U must setting time and other information to suit the present day and Ur will.
9. Run PPCPIMBackup.exe (ver 2.5) to restore all Contacts, Appoinments, and tasks)
10. Done at last Ur Radio, Ce ROM, and Ext ROM doing just fine.
Note: For addition to me, I install psidoc_sdhc.cab (to read SDHC Card), the allblack theme, today agenda, wkTask, TCPMP, and Opera 9.5 VGA for the additional program WM5.
Please that senior of this forum can make input or add to these step or method...
Good Luck, Guys.. and have a wonderful end year vacation..
PS: Sorry for the bad English...

i have error
sorry, I have a little problem.
I use task 28 55aa but failed to format partition.
USB> Task 28 55aa
Wait..
flFormatPhysicalDrive:status=115
DOC_format failed!
Click to expand...
Click to collapse
I'm lucky, when Upgrade or Downgrade main ROM(nk.nbf) or Radio (radio.nbf) , I don't have a problem.
But the problem where flashing extended ROM. Extended ROM can't Flash. Must be Error to flash extended ROM. I have many type ROM, and no one extROM can't be flash.
What should I do to re-format partition
anyone help?
I using XDA Exec (G3) with bootloader 1.01

hi all
i have the same problem like yours,tsk 28 dont work,and my phone is stuck in bot screen...please if you no what to do,post here..tanks

antonny said:
Hi. guys.
How Can I downgrade my O2 Exec from ROM 8.2 Tomal to its original ROM WM5 (O2 Exec)
Click to expand...
Click to collapse
Hello,
can i know why you want to downgrade? I still have original ROM but i want to upgrade. Any problem?