Hey,
I'm pretty new at this, so I'll explain how i've gotten in to this.
1. Bought a HTC tytn UK and I wanted it in dutch
2. Since I couldn't find an original rom i flashed it to the dutch rom from shap's (wich is actually great)
3. Then i did find an original rom but wasn't able to flash it so i used "HTC Hermes SIM & CID Unlock - v3a"
4. The original dutch rom works fine now, except when i go to device info
Rom version: empty
Rom date: empty
Radio version: empty
Protocol version: empty
CPU: 8 squars
speed: 6 squarsBe...
No imei number and so on.
Can someone please help me, maybe in the future when i try to sell the phone this must be ok.
Thx a lot to all xda developers here !!!
edit: original bootloader and ipl were: SPL-2.05 IPL-1.04 (maybe it has something to do with that?)
roeldm said:
Hey,
I'm pretty new at this, so I'll explain how i've gotten in to this.
1. Bought a HTC tytn UK and I wanted it in dutch
2. Since I couldn't find an original rom i flashed it to the dutch rom from shap's (wich is actually great)
3. Then i did find an original rom but wasn't able to flash it so i used "HTC Hermes SIM & CID Unlock - v3a"
4. The original dutch rom works fine now, except when i go to device info
Rom version: empty
Rom date: empty
Radio version: empty
Protocol version: empty
CPU: 8 squars
speed: 6 squarsBe...
No imei number and so on.
Can someone please help me, maybe in the future when i try to sell the phone this must be ok.
Thx a lot to all xda developers here !!!
edit: original bootloader and ipl were: SPL-2.05 IPL-1.04 (maybe it has something to do with that?)
Click to expand...
Click to collapse
1) you need to flash HardSPL
2) make sure you have flashed a new radio after using the CID/SIM unlocker, due to the fact that it downgrades it to a very old radio for it to work.
I had this issue when I tried a version of HTC Home Customizer that I found somewhere on the net.
To make it all come back, I had to hard reset, and not reinstall the program that caused it. I'm not sure if any other programs could cause that issue, or why it was caused.
I've flashed my device to HardSPL. now wich radio rom should I use?
I've found several radio rom but I don't have a clue wich one is best for me (Belgium, Mobistar)
flash a shipped ROM from here, there is a dutch HTC from there. get to boot loader, pressing the ok on the left, power on right, and stick stylus in at the same time. plug it to active sync, and run the exe file from the WM 6 rom upgrade/downgrade.
Related
I have an AT&T Siemens SX56. I used the XDA-developers Special Edition ROM v1.2 to get my SIM Lock disabled. I have T-Mobile service and my T-Mobile SIM now works, hoooray!
However!, The version of Pocket PC on this ROM is not to my liking.
I went to siemens site and they offer the latest Windows Mobile 2003 for my device, however I can't use it becuase my ROM versions don't match.
IS there any way I can upgrade the latest Windows mobile 2003? What would be the recommended method?
My current SX56 info:
Rom Version: 3.17.03 ENG
Radio Version: A.33.02
Protocol Version: 1.3.3
Model No. says: PW10a1 (even though it says on the back PW10b1)
MS Pocket PC 3.0.12039 (build 11178)
Any help or advice would be appreciated. I scared to do anything for fear that using a ROM kitchen might toast my ROM
ANY advice on this would be greatly appreciated!!
Thanks,
Brock
the rear sticker is THE right one .. your device is B and it works on 900/1900 MHz.
As long you don't touch the RSU part and you are using the SD method for ROM flashing, there is almost nothing can go wrong for using the kitchen for ROM cooking. I can't remember how many times I flashed my ROM
You can get more details by reading through this forum carefully.
Good luck
Hmm... So what version of ROM on this ROM kitchen website would be most recommended: http://lumpistefan.dyndns.org/ ?
Also is there a reason why you are only allowed 3620kb of ROM space? I thought my device had 32MB?
All I would have to do is create the ROM on that site save it as a .exe and then it would do everything else?
Thank you for the quick reply!
I forgot to mention that I have the Wallaby Boot loader version 5.22, if that makes any difference.
I also was wondering if the newer radio versions make any difference on reception/clarity/availablity of a signal????
Another thing I was wondering about is... How come on this ROM kitchen website http://lumpistefan.dyndns.org/ I have to e-mail information and await instuctions to proceed? Does he have to give me a special number that is generated to make the ROM I downloaded work w/ my IMEI or device?? Or is that totally not right???
Thanks again,
Brock[/i]
Hi all,
First of all I want to thank you for your time.
I bought a Blue Angel device from a friend of mine but unfortunately I'm not so sure who made it.
It does have the bluetooth, camera on the back, wireless wifi, etc.
About a week ago, the phone function died. I verified that it wasn't the GSM card because when I moved the GSM (Cingular) to a different cell phone, it does work.
I then found out that from the device information, I only saw the ROM version, ROM date and ExtROM version BUT the Radio version and the Protocol version are blank.
I am attaching the devicedata.txt.
With that in mind, I have tried to upgrade the ROM and the Radio. I'm currently running the O2 ROM with the following information:
1. ROM version 1.12.62 WWE
2. ROM date: 10/04/04
3. Radio version: Blank
4. Protocol version: Blank
5. ExtROM version: 1.12.178 WWE.
When I tried to upload the Radio ROM, it seems to upload it, no error messages but still the radio version information is blank and my Blue Angel is still not recognizing as if the radio is off.
I tried to upload other ROM, like Imate PDA2k, Siemens SX66, etc but I couldn't because sometimes it kept complaining about country id or language id not correct.
I really appreciate any helps, inputs on this matter. I'm kind of dead on the water without my phone...
Thank you so very much,
Tambeng
Upgrade everything, not just the radio rom, you have a really old stuff running there...
Download upgrade from. clubimate.com and install it. But only of you have PDA2K.
I did try upgrade it to the following:
With that in mind, I have tried to upgrade the ROM and the Radio. I'm currently running the O2 ROM with the following information:
1. ROM version 1.12.62 WWE
2. ROM date: 10/04/04
3. Radio version: Blank
4. Protocol version: Blank
5. ExtROM version: 1.12.178 WWE.
But after the upgrade the Radio version and the Protocol version went blank again.
Do you think the fact that the radio version is blank is the cause of my phone to die?
Has anyone else since this issue before?
Thanks,
Tambeng
plemax said:
Download upgrade from. clubimate.com and install it. But only of you have PDA2K.
Click to expand...
Click to collapse
I tried to download but it says about the model is not correct.
btw: what does it mean by a ROM that says cooked?
Thanks,
Tambeng
No, no. Try to download from official website. What is your PDA call? It must be says some where on it.
btw: what does it mean by a ROM that says cooked?
Click to expand...
Click to collapse
It means that somebody made it by himself - not official. People take different parts from different ROMs and put them together into one ROM. You don't need things like this right now.
tambeng said:
Do you think the fact that the radio version is blank is the cause of my phone to die?
Click to expand...
Click to collapse
Very possible. What is wrong with your phone exactly? It's searching for signal or......?
It's actually really interesting that it didn't have any brand at all on it.
It just says, PocketPC on the top right corner. Can I identify the maker from the IMEA? I can share the IMEA number.
As for the phone, it doesn't even search for a signal at all. It just have the exclamation mark, like "!".
Thanks for your help,
Tambeng
hee, guys.
Question: i want to change my rom and get rit off the tmobile skin and things.
so wich one can i use please help thanks
I have a mda pro tmobile simlocked
rom version 1.12.42 WWE
rom date 08/23/05
radio version 1.00.02
protocol version 42.33p8
Extrom version 1.12.125 WWE
hmm nobody???? 8)
Hi,
I changed my MDA Pro to the Qtek-Rom and the Radio to the 1.04.10
If you do so, also the language will be changed (from German to English) and the Keyboard-Layout ((Quertz to Querty) which you can resolve with some registry-hacks).
My device is running more stable and has more memory (Qutek is without any branding)
Teja
tjangoman said:
hee, guys.
Question: i want to change my rom and get rit off the tmobile skin and things.
so wich one can i use please help thanks
I have a mda pro tmobile simlocked
rom version 1.12.42 WWE
rom date 08/23/05
radio version 1.00.02
protocol version 42.33p8
Extrom version 1.12.125 WWE
Click to expand...
Click to collapse
I have the same PDA (MDA PRO T-Mobile Simlock) and i haven't ExtROM is normally?
Initially before put "1.12.125 WWE" what yuo have?
hee teja ,
so for me the next step is get the latest qtek rom and the Radio to the 1.04.10
and after that change some keys.
is it possible to explain me execly what i have to do because i am not familiar whit this software changing
you would help me allot
cheers
Will be no problem to help you - but this way I need some details:
Which kind of keyboard do you have? QWERTZ or QWERTY (look at your keyboard ant the first 5 letters are important).
You've to download the following files:
UNI_Qtek_WWE_11364_151_10300_Ship.exe
MaUpgradeUt_noID.exe
radio_1.4.10.zip
which all can be found at the ftp-server of the developers
ftp://[email protected]/Universal/
but you've to look in all folders (Roms + shipped Roms)
Make a new folder on your PC (maybe update)
Use WinRar to expand "UNI_Qtek_WWE_11364_151_10300_Ship.exe" to this folder
Copy "MaUpgradeUt_noID.exe" to "update"
Delete the radio.nbf in "update"
Expand "radio_1.4.10.zip" to "update"
REMOVE every card from your MDA (SD + SIM)!!!
Connect your MDA
Run "MaUpgradeUt_noID.exe"
if there is an error (mostly language...) run "MaUpgradeUt_noID.exe" again without changing everything!
After the update-prozess, you don't have to disturb the installation of the programs (it's only usefull stuff, no branding).
Change the key-respons from QWERTY to QWERTZ:
Use a registry-program like resco explorer with registry add-in and change the following key:
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Qwerty]
change: Layout from 66569 to 66567
You can also change the soft-keyboard, but I'll tell later because I've to go!
Good luck!!!
Teja
if you got
Now at home with MDA Pro:
Here is the link how to change the symols in the soft-keyboard:
http://forum.xda-developers.com/viewtopic.php?t=34398
Some things cannot be changed in the soft-keyboard but that's no matter!
Have a nice weekend,
Teja
Teja said:
You've to download the following files:
UNI_Qtek_WWE_11364_151_10300_Ship.exe
MaUpgradeUt_noID.exe
radio_1.4.10.zip
which all can be found at the ftp-server of the developers
ftp://[email protected]/Universal/
but you've to look in all folders (Roms + shipped Roms)
Click to expand...
Click to collapse
Hello Teja,
The site you give here requires password.
I looked here:
ftp://ftp.xda-developers.com/Universal/
But can't find the mentionned files.
Other thing did you perform a backup of your original ROM? If yes how?
Thank you
No, I didn't perform a backup, and I think it isn't possible at the moment.
Here are the direct links. Hope they'll work:
ftp://xdaupload:[email protected]/Universal/MaUpgradeUt_noID.exe
ftp://xdaupload:[email protected]/Universal/ROMs/radio_1.4.10.zip
ftp://xdaupload:[email protected] ROMs/UNI_Qtek_WWE_11364_151_10300_Ship.exe
Maybe you should copy the whole links in your browser and it'll work. I use firefox 1.5 and I'm able to browse on the ftp-server...
Have a nice week and good luck!
Teja
Thank you!
Hello Teja,
Those links are working fine.
Thank you!
Re: Thank you!
Lousticdr said:
Hello Teja,
Those links are working fine.
Thank you!
Click to expand...
Click to collapse
Sorry I made a mistake: I gave you the link for a old radio-update...
Here is the correct one (I also edited my post):
ftp://xdaupload:[email protected]/Universal/ROMs/radio_1.4.10.zip
If you've allready done the updates, you can make the radio-update without loosing any datas:
rename all *.nbf to *.old and copy the new radio-file in your update-folder. Run the MaUpgradeUt_noID.exe (maybe twice) again.
The MaUpgradeUt_noID.exe will only show the radio-update!
Just do it - after finishing, soft-reset your device (no hard-reset is necessary).
Enjoy the new update!
Teja
hee teja the first letters are qwerty and i have a mda pro tmobile simlocked
Ihave everything downloaded also the resco.
i don,t have to worry a bout stuck in the bootloader and things??
i,ll have to work so i am gonna give it a try tommorow.
thanks again 8)
rom version 1.12.42 WWE
rom date 08/23/05
radio version 1.00.02
protocol version 42.33.p8
EXTROM VERSION 1.12.125 WWE
Hey,
I first felt into Boodloader-Modus, but it was my own fault. It took a long time to solve the problem, but it was very easy:
REMOVE ALL CARDS FROM YOUR DEVICE! SD + SIM!
My one was "Net-Locked" and I've never heard about problems with "Sim-Locked" (but I always was not interested in)...
Teja
Error while radio/complete update
Hi,
today i tried to update the radio on my mda pro:
- I removed the SD and the SIM card.
- I did a reset
- I started the MaUpgradeUt_noID.exe 2 times
- the upgrade started but stayed on 0 % for 5 minutes
- then it stopped with an error and I still got the original version
I tried this 3 times and I even tried to do a complete update as it is suggested here and always got the same error message.
Can this be because of active sysnc, the virus scan program or the cable (although it is the original cable)? Do I need Active Sync for the upgrade or can I stop it somehow?
Hi,
it is suppost to close "Active Sync" (by Task-Manager) and to disable the firewall / antivirus, but I never had problems without doing so...
Is your MDA in BL-Modus when you want to update (blank screen) or is it still in "normal" modus?
Maybe you've the possibility to use an old computer/notebook without any programs running on?
Teja
Radio update problems
Hi again,
it is in blank screen mode - but if you look very closely (the backlight is off) the screen sys something like updating radio... please wait.
and what happens?
nothing happens - just an error after 5 minutes
I tried it with the bootloader mode afterwards and then it worked with the radio update. afterwards i tried the full update with bootloader screen - but it only worked the second time...
It's written in this topic that you've to run the update 2 times ==> so it works perfect! Congratulations!
Teja
Teja, thanks for your mini howto guide above. I am now installing the Qtek rom on my MDA Pro.
However you should realise that only germans use QWERTZ keyboard layout, the dude who started this topic is dutch, so am I, we use QWERTY. So the info on that part is somewhat useless.
But thanks again
T-Mobile UK Vario II HERM300
IPL - 1.04
SPL-2.10.Olipro
Rom Version: Black Satin
Rom Date: 07/10/07
Radio Version: 1.41.00.10
Protocol Version: 32.74.7020.18H
I have searched and as you can probably imagine any people have done neraly the same thing, but i cant seem to find one exactly the same.
I am in need to revert back to the original WM5, but to keep the phone unlocked with SPL 2.10.Olipro. I used the Hermunlocker.
Beleive it or not i have a backup rom.
Is there anyone that could help me step by step on what i need to load into the device and in what order.
My need to do this is to sell on and move onto the next Vario.
I see there being a problem if i sell it on, in the way that someone will probably get confused without the original O/S on.
Any help is very much appreciated.
Sorry if i have repeated myself over another post, but im being honest as i have been looking from work and home today.
Again thanks in advance.
In my current position can i install rom
RUU_Hermes_TMO_UK_3.60.110.4_6275_1.50.00.00_108_Ship.exe
Thanks again
If you've got the original ROM or a provider supplied upgrade then rolling back to that should not be a problem. Have a look at MrVanx's link in my Signature.
erm, this probalby isnt the place for this
you didn't hear from me, but there is an official t-mobile wm6 for hermes on the t-mobile.co.uk website.
a few small issues with it, windows live is not supported neither is blackberry connect. oter than that it seems ok.
you may need to change your voicemail number from +44 to 0044 prefix
it may not be up there for long tho
Hello
I am new here, i have a qtek 9000 that run wm5, what should i do to up-grade to wm6. What up-grade do you suggest i need in order to increase the performance of my phone.
Here is all the information that i have on the phone.
rom version : 1.30.77 wwe
rom date 02/20/06
radio version; 1.11.00
Protocol version: 42.45.P
ExtROM version: 1.30.9090
The second problem that i hace is that the phone is constanly reseting, i don't know why, but when battery reach approx. 80% it turn off and reset. Then i have to plug in the charger in order for it to restart? Can anybody help me
thanks
My first post !
Hi, for the reset problem I suggest you to look to the wiki, you will find some types of strategies to fix this, it seems to be a battery problem(just my opinion). For the upgrade you have to look wath's the boothloader version of your device. If you have 1.00, you have to upgrade the boothloader before flashing a new wm6 rom. In any case you will find all this and other informations in the wiki. When you will be done, if you want, I will suggest you the best roms available .
P.S.: excuse me for bad english.
keleric said:
Hello
I am new here, i have a qtek 9000 that run wm5, what should i do to up-grade to wm6. What up-grade do you suggest i need in order to increase the performance of my phone.
Here is all the information that i have on the phone.
rom version : 1.30.77 wwe
rom date 02/20/06
radio version; 1.11.00
Protocol version: 42.45.P
ExtROM version: 1.30.9090
The second problem that i hace is that the phone is constanly reseting, i don't know why, but when battery reach approx. 80% it turn off and reset. Then i have to plug in the charger in order for it to restart? Can anybody help me
thanks
Click to expand...
Click to collapse
before upograding you have first to make a lot ( I really mean it) of reading thru 1) XDA_wiki and 2) all 3d you can on the different wm6 available ROMs ( see upgrade wm6 section) You can have an idea of what are the problems users have/are encountering.
My 1 cent
a)Enter into bootlader mode ( pls don t ask how, look and search) and find out if you have a G3 device ( vers 1.0x) or G4 ( vers 2.x) . Depending on this you have to first check if the ROM upgrade you ve selected among the different available is OK for your device. Few ROMS infact have different version for G3 and G4) . If you have a bootload vers 1.0 or below, first upgrade to a more recent version before even thinking to upgrade ROM.
the upgrade Bootload tools are available in general on your device site ( I have an Imate , I have the sw there) or look and search here....in this site there is EVERYTHING! go to the ftp section , link unders XDA-Wiki, Universal and search
b) upgrade to Active e Synch 4.5
c) Create a folder where you ll put the selected Wm6 version that you ve picked and unzip it.
d) You ll see the following files:
EnterBL
Get device data
RUU.conf
Ruu.dl
Ruuenc.dll
UI.dll
ROMUPGRADE.exe AND !!!!
nk-.nbf ( this is the ROM UPGRADE)
ms.-nbf ( this is the external ROM)
This is almost all what you need to start to upgrade. Infact you might also want to upgrade to a most recent radio version ( radio._nbf) . I am using 1.15 that is very stable and powerfull but pls read comment of users using the selected Wm6 you ve picked and check their coments. A higher version is not implicitely a better version.It depends on Wm6 rom version and the operator you re using.
Therefore, if you want to upgrade the radio as well , proceed to the FTP of universal, and download the radio version you like . Unzip the file , copy and paste JUST the radio._nbf file to the folder above created.
e)Connect to AS and make the last synch before the upgrade and disconnect
f) take sim and sd card out.
g) put down firewalls and antivirus on your PC
h) open AS and uncheck File/connection Settings/ USB connection
i) connect device to PC, you ll see AS wont start ( of course)
l) enter into bootloader mode
m) click on Romupgrade.exe
n) follow EXACLY instructions on your PC screen...be cool, be patiente. It will take some 20 minutes....
when everything is finished , disconnect , do a NORMAL soft reset and here you are.
Flag again USB connection in AS and synch. you have now a wm6 version. I am using Ranju 7.1 and it flys as an angel on my JJ, but I suppose there are plety good ones around