Hi all,
First of all I want to thank you for your time.
I bought a Blue Angel device from a friend of mine but unfortunately I'm not so sure who made it.
It does have the bluetooth, camera on the back, wireless wifi, etc.
About a week ago, the phone function died. I verified that it wasn't the GSM card because when I moved the GSM (Cingular) to a different cell phone, it does work.
I then found out that from the device information, I only saw the ROM version, ROM date and ExtROM version BUT the Radio version and the Protocol version are blank.
I am attaching the devicedata.txt.
With that in mind, I have tried to upgrade the ROM and the Radio. I'm currently running the O2 ROM with the following information:
1. ROM version 1.12.62 WWE
2. ROM date: 10/04/04
3. Radio version: Blank
4. Protocol version: Blank
5. ExtROM version: 1.12.178 WWE.
When I tried to upload the Radio ROM, it seems to upload it, no error messages but still the radio version information is blank and my Blue Angel is still not recognizing as if the radio is off.
I tried to upload other ROM, like Imate PDA2k, Siemens SX66, etc but I couldn't because sometimes it kept complaining about country id or language id not correct.
I really appreciate any helps, inputs on this matter. I'm kind of dead on the water without my phone...
Thank you so very much,
Tambeng
Upgrade everything, not just the radio rom, you have a really old stuff running there...
Download upgrade from. clubimate.com and install it. But only of you have PDA2K.
I did try upgrade it to the following:
With that in mind, I have tried to upgrade the ROM and the Radio. I'm currently running the O2 ROM with the following information:
1. ROM version 1.12.62 WWE
2. ROM date: 10/04/04
3. Radio version: Blank
4. Protocol version: Blank
5. ExtROM version: 1.12.178 WWE.
But after the upgrade the Radio version and the Protocol version went blank again.
Do you think the fact that the radio version is blank is the cause of my phone to die?
Has anyone else since this issue before?
Thanks,
Tambeng
plemax said:
Download upgrade from. clubimate.com and install it. But only of you have PDA2K.
Click to expand...
Click to collapse
I tried to download but it says about the model is not correct.
btw: what does it mean by a ROM that says cooked?
Thanks,
Tambeng
No, no. Try to download from official website. What is your PDA call? It must be says some where on it.
btw: what does it mean by a ROM that says cooked?
Click to expand...
Click to collapse
It means that somebody made it by himself - not official. People take different parts from different ROMs and put them together into one ROM. You don't need things like this right now.
tambeng said:
Do you think the fact that the radio version is blank is the cause of my phone to die?
Click to expand...
Click to collapse
Very possible. What is wrong with your phone exactly? It's searching for signal or......?
It's actually really interesting that it didn't have any brand at all on it.
It just says, PocketPC on the top right corner. Can I identify the maker from the IMEA? I can share the IMEA number.
As for the phone, it doesn't even search for a signal at all. It just have the exclamation mark, like "!".
Thanks for your help,
Tambeng
Related
Hi,
Just uploaded the radio 1.06.00 only upgrade to the ftp:
ftp://xda:[email protected]/Uploads/Universal/Universal Radio Only Upgrade 1.06.00.rar
It seems that it's faster to ring and to answer...
ncruz said:
Hi,
Just uploaded the radio 1.06.00 only upgrade to the ftp:
ftp://xda:[email protected]/Uploads/Universal/Universal Radio Only Upgrade 1.06.00.rar
It seems that it's faster to ring and to answer...
Click to expand...
Click to collapse
I understand that you hadn't to hard reset the jasjar after upgrade it with this radio. Please confirm and if is any tricks to apply.
As you can see below, I have radio 1.04.10 installed. Anybody know the differences between these 2 loads?
Thanks in advance (obrigado). BetoX
---------------------------
iMate JASJAR
ROM Version: 1.13.53 WWE
ROM Date: 23-09-2005
Radio version: 1.04.10 (MANUAL UPGRADE)
Protocol Version: 42.36.P8
ExtROM version: 1.13.137 WWE
No tricks, no hard reset, just a normal radio upgrade...
Hello
Has anybody tryed this on the Xda Exec?
Regards
Gigino
ncruz said:
No tricks, no hard reset, just a normal radio upgrade...
Click to expand...
Click to collapse
I don't know what pocedure you guys use, because to me happens allways the same... have to hard reset it, upload the original ROM and following it upgrade to the latest radio...
Can somebody explain the complete procedure without having to hard reset it?
Thanks in advance (obrigado). BetoX
---------------------------
iMate JASJAR
ROM Version: 1.13.53 WWE
ROM Date: 23-09-2005
Radio version: 1.04.10 (MANUAL UPGRADE)
Protocol Version: 42.36.P8
ExtROM version: 1.13.137 WWE
Where did this version of radio rom come from? Can anybody who has done the upgrade comment on the version? anything better or worse?
gigino said:
...
Has anybody tryed this on the Xda Exec?...
Click to expand...
Click to collapse
I've been using radio: 1.06.00 since Tuesday or Wednesday without problems. Hasn't fixed nor broken anything as far as I can see.
Radio 1.06.00 was issued as part of the recent German MDA update.
[No message]
Yes, ist working, had to do the update several times, like 10x, before it was installed, soft reset ......and.....IT'S ALIVE
thanks
Thanks, ncruz! the radio upgrade on my MDA Pro worked flawlessly on the first attempt. My device information now shows:
ROM version: 1.13.69 WWE
ROM date: 10/12/05
Radio version: 1.06.00
Protocol version: 42.37.P8
ExtROM version: 1.13.162 WWE
I was hoping the radio would solve a couple of issues I've mentioned on this thread:
http://forum.xda-developers.com/viewtopic.php?t=38876
but, unfortunately the wireless manager and bluetooth issues still persist.
Hi,
Removed SD and SIM cards.
However, as with my all Universal previous ROM upgrades (only Radio till now), I got several errors (114; 150;...) till succed. About 15 and long attempts.
Did you experience a similar problem?
Could it be related with device bootloader version (mine is v1.00). Does someone has a newer one?
Between some attempts and errors, I need to 'soft reset' or 'cold boot' in order to get a different error, and finally a succesfull attempt.
I've a Qtek 9000 with a TMN SIM (Portugal) and it works fine after upgrade.
Just in case, I want to give up in future similar operations, does someone knows how to get rid of the bootloader? Does an Hard Reset resolves? Is there any other way?
Error 114: Radio ROM update error
Error 150: ROM upgrade utility error
I "up?"graded to radio 1.06.
I found it in some conditions slower than 1.04.10, and when I use NovosecSmartFilter, it freezes when a call comes althogh it worked with the previous radio ROM.
Just for you to know...
Tuningszocske said:
I "up?"graded to radio 1.06.
I found it in some conditions slower than 1.04.10, and when I use NovosecSmartFilter, it freezes when a call comes althogh it worked with the previous radio ROM.
Just for you to know...
Click to expand...
Click to collapse
I've noticed 2 times now (with hard resets between) that sometimes when I receive a call, my Contacts open and I can't close them. I can click the Start menu and run another app but then Contacts is brought to the front again. After enough clicking to close Contacts, the upper right corner quickly alternates between "OK" and "X" and I end up having to soft reset.
One thing that I did do differently is that I performed a soft reset prior to O2's extRom installation. Are there any 'fixes' in their extRom that I might need to manually install?
I'm thinking about going back down to 1.04.00 as I didn't have this problem prior. But I'd rather not downgrade.
I'm down?grading to 1.04.10 now....
Re: Radio 1.06.00 Upgrade - borged
ncruz said:
Hi,
Just uploaded the radio 1.06.00 only upgrade to the ftp:
ftp://xda:[email protected]/Uploads/Universal/Universal Radio Only Upgrade 1.06.00.rar
It seems that it's faster to ring and to answer...
Click to expand...
Click to collapse
Hi I did the supid thing of not actually following all the instructions,
I just installed update over a bluetooth activesync connection.
It never finished but after a soft reset my device sits with a grey screen
with the words Serial and v0.60 at the bottom.
I have tried to hard reset and soft reset but the device wont boot
Any ideas?
Eric
Re: Radio 1.06.00 Upgrade - borged
eappel said:
....I just installed update over a bluetooth activesync connection.
It never finished but after a soft reset my device sits with a grey screen
with the words Serial and v0.60 at the bottom.
Eric
Click to expand...
Click to collapse
It's looking for a serial (not available on Universal) or USB connection, so you'll need to connect to "ActiveStink" via USB cable. The "Serial" will normally change to "USB" when you plug USB in.
Unfortunately, I've never tried it with an *un-partnered* device stuck in bootloader mode - hopefully somebody else has.
ncruz said:
Hi,
Just uploaded the radio 1.06.00 only upgrade to the ftp:
ftp://xda:[email protected]/Uploads/Universal/Universal Radio Only Upgrade 1.06.00.rar
It seems that it's faster to ring and to answer...
Click to expand...
Click to collapse
Can u let me know whether i can upgrade on dopod 900 in singapore or this upgrade is restrict to a particular country.
cheers Taurus
can be used for Dopod 900 also...
the radio update is for all models of HTC universals...
Re: Radio 1.06.00 Upgrade - borged
eappel said:
Hi I did the supid thing of not actually following all the instructions,
I just installed update over a bluetooth activesync connection.
It never finished but after a soft reset my device sits with a grey screen
with the words Serial and v0.60 at the bottom.
I have tried to hard reset and soft reset but the device wont boot
Any ideas?
Eric
Click to expand...
Click to collapse
You have to instal complte original ROM, the one that came with the phone,
just conect the phone with usb, start upgrading your phone, and wait for 20 minuts to be done
thats how I manage to fix mine 8)
I Removed the Radio 1.06.00!
I had a lot of problems with Messagin. I losed all my internet account/Configuration, my SMS ....
It was a problem with the Radio 1.06.00"
On occasion when I try to make a call...it will just say dialing but will never connect. so I hit END and try to dial again. A pop up window opens and says Phone application failed. Then I have to reset in order for me to make a call. would this be fixed by upgrading to a different radio version?
im running WM6 Vanilla on my TyTN, on Cingular/at&t.
Radio Version 1.03.03.10
thanks in advance.
you sure you wrote the correct radio version down????
yes that's what my TyTN tells me is my radio version...
cpcrazyfly said:
yes that's what my TyTN tells me is my radio version...
Click to expand...
Click to collapse
You definitely should update your radio ROM to a newer version!
Cheers
tadzio
im only familiar with doing ROM updates. can I update just the Radio without going thru the hoopla needed when doing a ROM update?
and is there a certain radio I should upgrade to?
yes...read the wiki
i upgraded to latest Radio via the WIKI. now i have a "U" where i do not have 3G, i wont be at work til tomm, but im assuming it wont have my nice 3G? why did this change?
On my TyTN, WM6 Vanilla
ROM Version: 3.22.110.1
ROM Date: 01/04/07
Radio Version 1.41.00.10
Protocol version: 32.74.7020.18H
like i said i just upgraded to the 1.41.00.10 Radio, and now when i am in a non 3G area, instead of a "G" at top, i have a "U", with a little "E" when connected to data. i wont be in a 3G area until tommorow sometime to see what it says then.
ive installed the shogun_nice3G to get the G and 3G icons back how i liked them, but it still says U when im not in a UMTS/3G area...
any suggestions?
Hey guys, I was wondering if I could upgrade the Radio Rom. I tried to find out what my Radio Bootloader was through the WIKI site but could not get the commands to work. All I know is that I have:
Rom Version: Schap's 4.01
Rom Date: 10/03/07
Radio Version: 1.16.00.00
Protocol Version: 32.53.7018.01W
ExtRom Version: 4.01.20071111
IPL: 1.01
SPL: 1.40.Olipro
I think that I need a newer Radio Rom as that one seems a bit old. The phone takes about 1.5 seconds to come back from sleep when clicking the power button.
You will have no problems upgrading radio. My phone started with 1.16 and is no up to 1.54.
sure, you can update the radio.
i suggest upgrading your IPL/SPL to HardSPL 7 or 9. i am currently using HardSPL 9 (2.60 Olipro), at the very least if you have a corrupted radio flash you will have your system bootable instead of a dead brick.
check out the ftp repository for xda-developers, you will be able to find v7 there (v9 is in the upload folder, but make sure you _only_ use it if you know what you are doing.)
Definitely upgrade SPL first, also do a little reading around, some radio roms work better in some countries than others and better on some network providers.
T-Mobile UK Vario II HERM300
IPL - 1.04
SPL-2.10.Olipro
Rom Version: Black Satin
Rom Date: 07/10/07
Radio Version: 1.41.00.10
Protocol Version: 32.74.7020.18H
I have searched and as you can probably imagine any people have done neraly the same thing, but i cant seem to find one exactly the same.
I am in need to revert back to the original WM5, but to keep the phone unlocked with SPL 2.10.Olipro. I used the Hermunlocker.
Beleive it or not i have a backup rom.
Is there anyone that could help me step by step on what i need to load into the device and in what order.
My need to do this is to sell on and move onto the next Vario.
I see there being a problem if i sell it on, in the way that someone will probably get confused without the original O/S on.
Any help is very much appreciated.
Sorry if i have repeated myself over another post, but im being honest as i have been looking from work and home today.
Again thanks in advance.
In my current position can i install rom
RUU_Hermes_TMO_UK_3.60.110.4_6275_1.50.00.00_108_Ship.exe
Thanks again
If you've got the original ROM or a provider supplied upgrade then rolling back to that should not be a problem. Have a look at MrVanx's link in my Signature.
erm, this probalby isnt the place for this
you didn't hear from me, but there is an official t-mobile wm6 for hermes on the t-mobile.co.uk website.
a few small issues with it, windows live is not supported neither is blackberry connect. oter than that it seems ok.
you may need to change your voicemail number from +44 to 0044 prefix
it may not be up there for long tho
Hey,
I'm pretty new at this, so I'll explain how i've gotten in to this.
1. Bought a HTC tytn UK and I wanted it in dutch
2. Since I couldn't find an original rom i flashed it to the dutch rom from shap's (wich is actually great)
3. Then i did find an original rom but wasn't able to flash it so i used "HTC Hermes SIM & CID Unlock - v3a"
4. The original dutch rom works fine now, except when i go to device info
Rom version: empty
Rom date: empty
Radio version: empty
Protocol version: empty
CPU: 8 squars
speed: 6 squarsBe...
No imei number and so on.
Can someone please help me, maybe in the future when i try to sell the phone this must be ok.
Thx a lot to all xda developers here !!!
edit: original bootloader and ipl were: SPL-2.05 IPL-1.04 (maybe it has something to do with that?)
roeldm said:
Hey,
I'm pretty new at this, so I'll explain how i've gotten in to this.
1. Bought a HTC tytn UK and I wanted it in dutch
2. Since I couldn't find an original rom i flashed it to the dutch rom from shap's (wich is actually great)
3. Then i did find an original rom but wasn't able to flash it so i used "HTC Hermes SIM & CID Unlock - v3a"
4. The original dutch rom works fine now, except when i go to device info
Rom version: empty
Rom date: empty
Radio version: empty
Protocol version: empty
CPU: 8 squars
speed: 6 squarsBe...
No imei number and so on.
Can someone please help me, maybe in the future when i try to sell the phone this must be ok.
Thx a lot to all xda developers here !!!
edit: original bootloader and ipl were: SPL-2.05 IPL-1.04 (maybe it has something to do with that?)
Click to expand...
Click to collapse
1) you need to flash HardSPL
2) make sure you have flashed a new radio after using the CID/SIM unlocker, due to the fact that it downgrades it to a very old radio for it to work.
I had this issue when I tried a version of HTC Home Customizer that I found somewhere on the net.
To make it all come back, I had to hard reset, and not reinstall the program that caused it. I'm not sure if any other programs could cause that issue, or why it was caused.
I've flashed my device to HardSPL. now wich radio rom should I use?
I've found several radio rom but I don't have a clue wich one is best for me (Belgium, Mobistar)
flash a shipped ROM from here, there is a dutch HTC from there. get to boot loader, pressing the ok on the left, power on right, and stick stylus in at the same time. plug it to active sync, and run the exe file from the WM 6 rom upgrade/downgrade.