Related
Could you guide to download new rom XDA II 1.66 with .nb1 file.
I found only xdaii_upgrade_16044eng.exe, how can I copy it to my SD and upgrade from bootloader?
Thanks
no your bootloader cant execute pc exe files
heck if you just copy the nbf file from inside the exe file to the sd card it will not work
read this
http://forum.xda-developers.com/viewtopic.php?t=8205
Does Anybody Have xdaII_upgrade_16044eng.exe
Please Help Me!
I Need this file to fix my XDA II Phone.
i've do something terrible with my XDA II while upgrade rom, and when i restart my phone it's only show serial.....................v1.06 that's all.
so, please help me???????????????????????????
Way around the model ID 100 error...but still not out of the
I don't think that is going to help you.... I have the same problem.
I am stuck in bootloader mode (1.06 is the new version).
things I have noticed about this bootloader (as I have spent lots of time with it...))
1. The Password BOOTLOADER is enabled on many of the commands (I understand it was not on the earlier versions) in this new version.
2. I have a bunch of XIP roms and even a few NB0 roms, and I cannot just "lnb" or "l" them over as they want start addresses and the lot (defaults do not work for either.
3. As I have access to another XDAII in the morning, I have not tried to erase the ROM on my device with the erase command. Even though I think that will solve the problem, I don't dare tempt fate again.
3a. A way around the Model ID error is to cold boot, or reset at just the right time in the upgrade program (this is when the device shuts off - or goes blank). This will then fake out the upgrade program and it will continue. However, with my problem, I get stuck at the first step of "erasing ROM". IT apparently times out as it is unsuccessful and gives you an error reading something like "there was a problem -- reset and try again" Since my problem is self inflicted (I upgraded but deleted the Radio stack and OS from the temp directory -- something the instructions tell you never to do --> but red letters or bold typing that little fact in the instructions may have helped me not to miss it!!)
3.b Maybe this info would help others in the same boat -- maybe not.
4. I am convinced that the problem is related to the new bootloader version and if I could down grade it, all would be well. But I am not that brave - would rather wait to D2S a good ROM from a good XDA2, then gamble further.
Does Anybody Have xdaII_upgrade_16044eng.exe
Please Help Me!
I Need this file to fix my XDA II Phone.
i've do something terrible with my XDA II while upgrade rom, and when i restart my phone it's only show serial.....................v1.06 that's all.
so, please help me???????????????????????????
Re: Does Anybody Have xdaII_upgrade_16044eng.exe
Ayu said:
Please Help Me!
I Need this file to fix my XDA II Phone.
i've do something terrible with my XDA II while upgrade rom, and when i restart my phone it's only show serial.....................v1.06 that's all.
so, please help me???????????????????????????
Click to expand...
Click to collapse
Ayu... XDAII-nya kenapa? Lu apain? Coba sini gue liatin. Telpon gue di 08158014342. Di Jakarta kan? Kalau di Jakarta langsung aja kita ketemuan. Mudah2an gue bisa bantu. Lama2 bule2 sini kayak TAI!! XDAII gue mati nih gara itu TEST ROM!! MONYET!! Gue kesel banget tuh ama yang posting itu ROM!! Ya... Gue juga sih yang geblek!! :lol:
Sir. Rudegar
I found 2 files of .nbf, so I have to run XDA OS ImageTool 3 times to copy to SD card right?
Can I don ony ms_nbf and NK.nbf?
Thanks
http://forum.xda-developers.com/viewtopic.php?t=8606
http://wiki.xda-developers.com/wiki/HimalayaRomFlashing
this should explane it step by step
no upgrade possible with HimaUpgradeUt.exe
I have tried a lot of different ROM's and different ways to upgrade my MDA II with HimaUpgradeUt. But the result is alwasy the same. MDA II starts in bootloader mode and I can only reactivate the device with a old ROM via SD card (image written via ntrw.exe).
Please can someone help me or can provide a ROM image from his device (MDA II, latest version, german or english).
Thanks.
Could someone please explain how I can update my rom to WM6 with vista? I found some procedures but got the impression that they became simpler in time but after reading a lot I can't find it back.
Or is there no simple way under vista. If there is I think a lot of users will be interested.
thanks
Present :
http://www.forummobiles.com/index.php?showtopic=139079
thanks!
But it didn't solve my problem allso under xp I keep getting the message that the upload utility is corrupt and it immediately goes to 100%. On the pda I am in the bootloader so all the connecting goes well.
I unlocked the sim and tested this by using another sim and phoning with it.
I allso cannot believe that the O2 rom that I try to install that is in this forum is corrupt.
BTW I hope that
- Connectez le PDA au PC, attendez qu'il soit connecté à Activsync (Gestionnaire pour appareils Windows Mobile sous Vista)".
means that I can use the vista mobility centre instead of active sync?
Do I have to change something there?
The error is
ERROR[270] : UPDATE ERROR
The image file is corrupted. Please check your update utility.
Ok, it worked but only with the rom that is given on that french site.
Or probably did something wrong.
Thnx!
I updated my rom from the original spanish version to a Artemis_Touch_3.01
After some use, the device is blocked.
It starts the HArd reset, after "Format messages" It starts HTC white screen
IPL 3.13.0001
SPL 3.13.0000
and nothing more
.
It also works ROM update mode (Three colors screen) but when I execute the Rom update frommy pc, it reaches 2/3% and gives different Errors depending the ROM,
"Ivalid Vender ID [294] when I use the ROM HTC_P3300_SPA_3.13.412.1_4.1.13.44_02.94.90_Ship_R
ERROR [270]: Update Error -The Image File is corrupted - When I use Black & Blue 4.3 or Artemis_Touch_3.01
I need help!!!
you need to flash your mobile with the original rom from your provider (spanish one's).
The thing is Im not sure which was the original version that was installed,
I tried with this one and didnt work
Ivalid Vender ID [294] when I use the ROM HTC_P3300_SPA_3.13.412.1_4.1.13.44_02.94.90_Ship_R
how can I know which rom I have to use?
Aquí tienes la oficial de Movistar que te servirá para arreglar tu HTC...
http://member.htc.com/ruudownload/Telefonica/TelefonicaWM6Step1.aspx
Un saludo
This is the oficial movistar ROM...
http://member.htc.com/ruudownload/Telefonica/TelefonicaWM6Step1.aspx
Uploaded the OFFICIAL WM6 MOVISTAR in RPSHARE
Hello all
In order to make easier the download process I have upload the file in Rapidshare, through this way you do not have to enter your Telefonica Serial Number .
http://rapidshare.com/files/7872213...A_3.15.621.1_4.1.13.50_03.06.90_Ship.exe.html
Best Regard.
It still doesn't work
when It reaches 2% it gives
ERROR Invalid Vender ID [294]
Coul be an issue with the ttery that has no charge? and I cant charge it?
martingzm said:
IPL 3.13.0001
SPL 3.13.0000
Click to expand...
Click to collapse
Sounds like you forgot to use USPL first. Read the sticky at the top of the Artemis forum.
cr0bar said:
Sounds like you forgot to use USPL first. Read the sticky at the top of the Artemis forum.
Click to expand...
Click to collapse
If phone bricked can't run USPL at all.Because USPL just work in Active Sync PPC to PC
Correct, and if you don't find the original ROM, no way for you to unbrick the mobile...
You should be able to use imei-check's unlocker though right? This will remove the super-cid and allow you to flash any carrier's rom.
I contacted with the repair service and now I know which is the original version Installed in my artemis
Imagen Software: 3.13.412.1
Imagen Extendida: 4.1.13.44
Imagen Radio: 02.94.90
If anyone have them, please send me the link...
Think i need that file to, same issue pls hilfe
Hi guys, first post, but I've been lurking for a while.
I was updating my Radio form .05 to .08 using the DIAMIMG file and the reset with vol down and back key. It gets to about 80% and freezes. Now when I had to reset it goes to the red green blue and white screen and says:
"Upgrade Rom code error Please try again"
Serial
I have been unable to get a usb connection to the handset.
I think I'm all out of ideas and I have spent the last few hours trying to find a fix
just flash anything else like a os, etc.
I thinks it solves the problem.
It did for me btw.
i flashed org rom update with os and radio and it solved my problem.
the issue is the I can't get diamoncustomruu.exe to find my phone. windows need a qualcomm driver of some sort, although my Ubuntu system gets the hand set to show usb instead of serial, but wine cannout run diamoncustomruu.exe in a windows wrapper. Mayber I'll have better luck in vista instead of xp?
Zoom, would you be able to run through the process you went through to recover please, including the OS and what files you used?
At the minute I have Olinex 1.40 and Dutty 2.5 on here. It is somewhere between radio .05 and .08 lol.
Thanks for any help!
Ive just installed the Official rom update from htc site.
My screen was stuck in the three colored screen with update error but the rom update solved it.
I just run the official update from there (3colored screen).
And in some how it worked.
Then i reinstalled the custom os, radio etc.
btw i have Hardspl 1.93OliNex UnsignedEdition
Hope it will help you, it worked for me, maby not 4 u but if it does congratualtions
i got my diamond bricked no power at all in it no reset and hard reset is not working and cant get to bootloader has any one a solution thanx in advance
I can now get it to boot and show the following:
PSOC-Diam STAGE_PVT v0x32
Upgrade Rom code error
Please try again
USB
windows not detects the devide (i think)
when the phone is stuck in boot load ahev you tried:
1 - soft reset with red button by stylus?
2 - hard reset manually?
3 - turn phone off, plug in to usb, turn on does it still not recognise? reinstall activesync
4 - have you tried flashing radios, other roms, reflashing hard spl?
does your phone just not get recognised at all?
ive had this problem a few times not just with the diamond, and i alwasy managed to fix
also some roms have an option when you download and unpack to just run rom update, it enters mdos and goes straight to rom update, i.e. it doesnt have the on screen prompts, this may bypass the problem too - i think SWTOS or SWIFTfl roms are like this, or try an original rom
if you are really not getting any response try resets
thats about all the info i cazn offer.
last resort, have you insurance?
hackey100 said:
I can now get it to boot and show the following:
PSOC-Diam STAGE_PVT v0x32
Upgrade Rom code error
Please try again
USB
windows not detects the devide (i think)
Click to expand...
Click to collapse
try to reflash from there
when I try to reflash with .08 from Dutty's site i get error 260 Connection in the utility.
Should I try MTTY or QMAT and if so, can somebody point me in the direction of how to use these, and where to find them.
thanks for your help so far.
yeaaahhhhhh all fixed,god I hat Vista sometimes
see you all when I'm back on Ubuntu
Since you had it working in Linux (the USB) and you seem to preffereble wanna use Linux . There is a Google Project page with an HTC Flasher for Linux. Also there is a ROM Kitchen Project, among others
http://code.google.com/p/htc-flasher/w/list
hackey100 said:
yeaaahhhhhh all fixed,god I hat Vista sometimes
see you all when I'm back on Ubuntu
Click to expand...
Click to collapse
Maybe you'd like to share with everyone what you did to fix it, to help others?
All I did was run the RUU Upgrade Utility in Windows Vista. Because i was able to detect the USB device in XP but couldn't write to it, I thought that it may be driver related.
Vista detected the handset as a USB device correctly and I was able to flash it with a new radio and then Dutty's new ROM.
I tried minicom and HTCFLASH in Ubuntu and was able to detect the device, but when I tried to write a new rom the progress bar in Linux completed, but the phone didn't change.
It's all good now, I'm just happy it didin't break.
Im glad it worked 4 u =)
always nice 2 could help a little bit
Wow, now there's a headline:
XP FAILS, LINUX LIES. VISTA SAVES THE DAY!
Stop the press!
Tell your friends!
in fairness, it is a windows mobile device so I'm not entirely surprised!
Had the same probs few times with xp (activesync) with Vista everythin goes regulary Now I don´t use xp for flashing anymore
Ciao ragazzi,
vi scrivo per chiedervi aiuto, perché pure il mio Diamond è bloccato.
La situazione è questa: dovendo portare il Diamond (della 3) in assistenza, ripristinai tutto originale (ROM, Radio e HSPL). Poi ieri sera, ho avuto la brillante idea di ripersonalizzarmelo. Flasho l'HSPL 1.37 Olinex, e va tutto bene; flasho la ROM Min.74 Y2 v.2.2 FULL, e va tutto bene; flasho la Radio 1.17.25.09, e mi si bricka il Diamond, riportandomi il seguente messaggio:
DIAM100 64M
SPL-1.37.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
Upgrade ROM code error
Please try again
Ho provato a fare un soft reset, niente;
Ho spento (togliendo la batteria) sperando che mi passasse da serial a USB, collegandolo al PC, niente;
Ho spento, collegato al PC e riacceso, niente, non va in modalità USB.
Il sistema operativo del mio PC è Windows 7 64bit; sul portatile ho XP: se accendo mentre è collegato al portatile, il portatile lo sente, ma non riesce a trovare i driver Qualcomm ecc.. ecc...
Insomma, ho il telefono bloccato e non so come uscire da questa situazione!
HELP!
--- --- ---
GOOGLE TRANSLATE
Hello guys,
I am writing to ask for help, because even my Diamond is locked.
The situation is this: having to carry the Diamond (of 3) in support, I restored all the original (ROM, Radio and HSPL). Then last night I had the bright idea of repersonalization. Flash the HSPL Olinex 1:37, and all is well, flash the ROM v.2.2 FULL Min.74 Y2, and all is well, flash the Radio 1.17.25.09, and I blocked the Diamond, returning the following message:
DIAM100 64M
SPL-1.37.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
Upgrade ROM code error
Please try again
I tried to do a soft reset, nothing;
I turned off (by removing the battery) and hope that I might pass from serial to USB, PC connection, nothing;
I turned off, connected to the PC and turned on, nothing in USB mode.
The operating system on my PC is Windows 7 64bit, I have XP on the laptop: if I turn on while connected to the laptop, the laptop feels, but can not find drivers Qualcomm etc...
In short, I have the phone locked and I can not get out of this situation!
HELP!
Try to boot in bootloader mode the phone,and from there connect to usb and try to flash original radio
If you succed flash hard spl 1.40 or 1.93
I managed to get my hands on a couple of old Data Messenders, but I'm not having any luck upgrading the firmware on them. The Product ID for them is FA123T#ABA - I'm a newbie, so correct me if I'm wrong, but AFAIK that's basically something that describes the configuration - does it have a cam, how much memory, etc. - is that right? So if I can get an image from a unit with a different product ID, (HP site has updates, but nothing for a unit with my ID) do I risk bricking the unit, or is it more likely just that there might be something that doesn't work right? I'd come across a tool called Bootloader_GUI.exe on a PDA site that seemed to possibly be something that might work, it at least understands to look for *.nbf files, but it doesn't want to flash my phones. Any other tools out there that'd let me update my firmware? What I'm running does have some glitches (voice mail icon never dissapears despite getting the message) and if I'm not mistaken there's improvements for battery life.
Here's the version info from asset viewer:
Version
Product Revision Level :
ROM Date : 2008-08-03
ROM Revision : 0.30.15-484-WWE
Extended ROM Version :
OS Version : 6.1
Bootloader Version : 1757
XIP Version : 1.0.0.0
I've attached the whole thing as an attachment.
OK, now I'm even more motivated to get the ROM in these units upgraded - I was able to get TomTom running on a model with a newer ROM version (12/08) with the same setting that don't work on this one. If I can't tweek the product id to let the latest from hp on them, can anyone walk me through dumping the newer ROM to sd, and how to load it onto the older machines. I've googled looking for how to put the units into boot loader mode, no joy. Did find something for a USB composite mode here in the "iPAQ Data Messenger - Anyone working on a WM6.5 ROM" thread, I'll try it when I get home.
Help!!!
Still looking for a way to upgrade these units - I remember on some older iPaqs that you could start the upgrade without power plugged into the iPaq, then when it complained, swap some files, and plug in power, and the upgrade would complete - anyone know the details for how that works and if there's a way to use the same trick? I suppose it could connect using bluetooth, but I'm a bit leary of flashing via bt. Anyone? Bueler?
ayuda....
hola, oye tengo el mismo id de la hp ipaq data messenger pero quiero actualizarla y me pregunto si tu ya conseguiste eso, pues aun no encuentro la manera de ponerlo en modo bootloader sera k me puedes ayudar?