I was trying to upgrade ROM using my notebook and craddle connection with i-mate pocket pc. While upgrading notebook fell asleep. As a result connection was interrupted and finally lost. I-mate doesn't react any actions like normal or hard reset now, and there is no connection with computer.
Please tell me what to do to make my i-mate work again.
try to boot it into boot loader mode, by pressing camera , power and then pressing the soft reset "pin" on the bottom of the phone.... if it boot ... youre lucky and then connect usb, disable activesync and reflash.....
Related
While upgrading my XDAII to the new O2 rom, I got a connection error which tiole me to disconnect the xda and do a soft reset.
I did this and it's now stuck on the O2 boot screen and wont budge, wont connect via active sync and does nothing else when I hard reset.
Have I f**ked it up ??
Please help,
Tommy
Don't panic
Just reset the device, place it back in the cradle and re-run the upgrade. It doesn't require Activesync as the upgrade process looks after its own connection.
Make sure the cradle is connected directly into a USB port on your PC and not to a hub. Also make sure the power supply is connected to the cradle.
Thanks, but that doesnt seem to help, the program just says that their is no connection.
Do you have another PC you can use? or try using a different USB port.
tried it on both and nothing, It looks like the XDAII can't start up properly and that's why it can't establish a connection. As I said it's stuck on the O2 boot screen (the one with the bubbles on it) with the version nos at the bottom and does nowt else.
I feel sick...
Tommy
OK. I misunderstood. I thought you were in the bootloader screen. So you need to see if you can put the device into bootloader mode. Press the jog button (bottom middle front of device) and power button at same time whilst pressing the reset button. This (hopefully) will put you in the bootloader - a dark screen with Serial 1.xx displayed. Then when device is put in cradle it should change to USB 1.xx. Then you can re-run the upgrade.
Whayhey
DCS you are indeed the man!
Thanks for your help.
Tommy
First of all Hello
I've been trying to update my XDA2i Pocke PC for more than an hour
and every time I start the Update Operation I got an error message and the operation corrupt agian it prompts me to reset it, after the reset, it informs me to disconnect the Pocket and Cardle USB, and reconnect it Again but it gave me a message on its screen told me Serial on the top of the screen, and on the buttom V1.01< What should I do?
Please Help me to get it alive again because it's dead now, and it won't work anymore, I need the method of booting it up, what are the buttons combinations to enter the boot again.
and If you gave the ROM Update for it, I'd be so grateful!! :lol:
PS: the Pocket information are
Pocket PC O2 XDA2i
Are you using a usb hub to connect, if you are then try plugging in direct to usb port. You will not be able to boot until you complete the flashing procedure, the program has probably wiped your previous rom.
It didn't work
Thanks sir,
but how can I do the flashing procedure, the Pocket PC wouldn't give the chance to do it!
and I've already plugged the USB directly to the PC.
Could you give the manner to falsh it again and boot,
because it is dead and silent
I'll be so grateful for your efforts
I had those 2 HTC diamond to unlock... I tried solution posted in this forum: with first phone all went wright and I manage to unlock it after some trys on step 3... the second phone crash on step 2.. now it does'nt turn ON, and can't enter BOOT MODE (tricolor mode), and battery is ok!
Please help me recover this phone!
Same problem. Diamond totaly dead during flashing. Any chance to turn on for reflashing? Nothing like hard reset or removing batery working.
same thing here!
any solution to repair dead diamond !!?
any news to repair this phone
Sorry guys, On a lighter note, if anyone who has a dead US Diamond wants to sell their housing, especially the back cover please let me know.
do it..........
ok first there is not dead diamond put your battery in phone and connect with pc download rom update or flasher or some hard spl fixers and instal it on your device
because when is there tricolor at the bottom of the screen when device is not conected there is word SERIAL, and if you connect there is word USB so do not crash your self just be patient.........
how to solve pb diamond can't be enter in boot mode even reconised by pc
after unlock using cdma unlocker
any news on this?? My diamond it dead as well and need it for work. Please help some one must know what to do. I can't even connect to my pc
Contact this man by Skype- elco_nsdongle. He repairs dead Omnias. If you'll find diamond shematics I think he'll be able to help you.
Any solution about dead diamond? ?
Hi I was try to to flash some cooked ROM and my Diamond tells that is incorect Image. Then restart and start to bootloader. So i try to send another Rom but after restart its freeze on "HTC Diamond" screen. Ill try Hard reset many times with no result.
After thay I tryed to turn Diamond Off (Remove battery and put it back). In turned off Diamond I press and hold volume down + press and hold reset and turn the Diamond on. This it bring him to Bootloader.
Try it if it works for you.
Im sorry for my bad English.
whoever needs to fix dead diamond, you can PM me for help
but I can only help if the device can still boot to bootloader (tricolour screen).
by unlock...did you mean security unlocker?
htc diamond usb data tranfer is not working
how can recover 4 gb data in htc diamond internal memory
usb data transfer is not working b"coz by mistake cable is broken and data tranfer is working stop
any one help me,
bluetooth tranfer is working but it's very slowly
From this site wm 6.5 toshiba g810 portege is for rom corrected install computer device with a connection was interrupted while I was waiting, and I did not correct the data cable was disassembled after the device was opened what what hard reset soft reset I can not do nothing for the upgrade was done completely right, but my devices boot screen After a more closed will not open, please help.
You must enter in DSUU mode, when turn on phone, HOLD Record button + Volume down button, then press 9 to enter in DSUU, after launch Flash software!
Bye.
My brother dsuu mode phone can not receive in any way will not open key audio recording and sound reduction would press not only the computer bagladıgım When the device is red ışıgı next to the computer does not see the device after a period of light is flashing and the computer sees the device data interface device, install software says
No more idea...... Sorry
help... i tried to change rom into wm6.5 ariey ultimate from sd card
first it didn't start but after i taken out battery when hard reset, keep all buttons pressed and replaced battery , it started to install.
unfortunatly it got stuck into hp welcome screen of winmobile 6.5.
when after a while i tried resetting, soft reset didn't work, and hard reset brought it back into bootloader without continueing to load the rom.
so here it is stuck. im open for any suggestion what to do to resolve this.
when connecting to pc, usb device doesn't show or connect.
blank
xen3c said:
help... i tried to change rom into wm6.5 ariey ultimate from sd card
first it didn't start but after i taken out battery when hard reset, keep all buttons pressed and replaced battery , it started to install.
unfortunatly it got stuck into hp welcome screen of winmobile 6.5.
when after a while i tried resetting, soft reset didn't work, and hard reset brought it back into bootloader without continueing to load the rom.
so here it is stuck. im open for any suggestion what to do to resolve this.
when connecting to pc, usb device doesn't show or connect.
Click to expand...
Click to collapse
now after trying to hard reset several times it dropped completly dead
nothing works any more, tried replacing battery and reset , but screen stays blank (black)
only charging batttery still works , or at least the light from battery switches on when connected to charger