I did upgrade my hp ipaq 2210, but it didnt succesfull.
Now my ppc doesnt show any thing (not windows and not bootloader screen), and two LED (blue and orange) are on, and cant connect to USB.
HELP ME PLZ
How can i restore the bootloader ? (i cant use mtty and activesync, becuse my PC cant detect the ppc over USB)
HELP ME PLZ
p.s. : sorry for my english problems.
Related
I tried to upgrade my ipaq 3950 to wm2003 English version from wm2002 Chinese version and something went wrong so now I can only get into what I understand is called "parrot": Red background with Compaq in and Serial or USB when I connect w/ usb cable. It is v0.48. I've been trying to use mtty.exe to load a backup rom I downloaded off the net but every time I use the command lnb rom.bin it says "start download" then waits for a few minutes, then says "Fail to synchronize with the host". I know I should just buy a new pda but I don't have the cash. Any help would be appreciated.
Unbrick H3950
Well, here is what worked for me. Get the PDA in bootloader mode again ( that is the mode where the screen is red and says USB or Serial ). Connect to your computer via USB sync cable. Then you want to run the Ipaq Softpaq again to install your WM2003. It should start installing, leave it alone until it says that it is complete. Don't wiggle it or even touch it, because sometimes those Ipaq sync cable connectors get to the point where they will loose connection if moved.
I have a Love (Arte300) device that doesn't want to start anymore,when I try to switch on it displays white screen with ipl1.36.0001,spl 1.36.0000,gsm 02.67.90,os 1.36.0.0 versions and it doesn't do anything else,it is impossible to connect to activesync it is possible to connect to the pc only in boot mode ,but when I try to use Artemis_uspl or artemis update rom it asys' error and doen't do it.Please any help for me?
Regards
hello
i have a uni who stuck on bootloader (BL) bl- v2.01
i use tomal 8.7, browsing aplication and find storage manager (some with partition program... ) and my uni was frozen after reboot ... (long story)
i turn (BL) and want to reflash my rom to other version, but my uni don't want it
i run a mtty/putty and want to do a DoC format, but programs don't want to connect with uni, i try a lot of usb cable, usb ports and a 4 computers with Winxp. i use a few version of mtty and uni exit bootloader, hx4700 bootloader...
and dosent works
yy windows not reconize uni show msg unknown device.
some screeens
http://esiu.kom.pl/universal
uni has no sim or sd card.
Hard reset dosen't works
BL keeps serial when i connect it to pc don't turn to "usb" only shows serial
ps. sory for my english
ps2. hmm i think i brick this uni testing storage manager ( option with unmount partiion or something)
ps3. please a sugestion to repair uni
Hello,
I think if you look on HERE the all will be there for you to sort out your problem
Regards
Jay
hmm ive read many times universal wiki and i dont find there a solution.
i think when i "using" storage aplication in tomal 8,7 i delete a partition then it "stuck"
uni in bl mode when plug usb cable don't change to "usb" stuck on "Serial"
if usb cable is pluged in when i turn bl mode when "usb" shows but dosent react with pc ... don't recognize it, active sync have unmarked 'usb connections'
Do you have your SD card and Sim card out of the PDA??
If you cannot see
Serial changing to USB on your device, I say your USB port is damaged and that prevents you from flashing any ROM or device being recognised by PC.
hmm so my port in uni is dameged? ok its software damage or hardware damage ? 10 minutes before uni was stuck i change rom few times.
HI ! i'm a tytn 1 owner and have decided upgrade my ppc under wm5 to wm6. when i enter in bootloader mode , the pc doesn't recognize my ppc (nb : when i connect the pc to my ppc via activesync , it works well but doesn't in bootloader mode ! what shall i do ???
try this links man!!!
http://forum.xda-developers.com/showthread.php?t=369434
http://forum.xda-developers.com/showthread.php?t=340468
http://forum.xda-developers.com/showthread.php?t=296722
http://forum.xda-developers.com/showthread.php?t=293665
Good Luck!!!
do it through sd card method
well, i also think so some times ago that my ppc is not connected to the pc in boot loader mode. but remember that when u r in boot loader mode, the active sync connection is not active but u see the usb written in boot loader mode. which means that ur ppc is connected to the pc. thats works in my case, hope it'll help u also.
Post 1160 on page 116 of the Hard SPL thread in upgrading... Easy steps to update Hard SPL using the sd card method...
hi everyone ive had this problem with my spv m2000 being stuck in bootlad mode
i just cannot find a way out of it
i dont have a manual for the device
any help would be greatly recived
i have read through the htc blueangel service manual posted by chef tony but carnt get any response from the handset
ghostmachine said:
hi everyone ive had this problem with my spv m2000 being stuck in bootlad mode
i just cannot find a way out of it
i dont have a manual for the device
any help would be greatly recived
i have read through the htc blueangel service manual posted by chef tony but carnt get any response from the handset
Click to expand...
Click to collapse
Have you Windows 7?
i have windows xp and a windows 7 pc
the phone was running wm 2003
in case you tried upgrading from windows 7 you should follow d-two's tutorial here: http://forum.xda-developers.com/showpost.php?p=5456317&postcount=6
i have followed the guide and got nothing
its still in bootloader v2.08 i just hope its not a faulty phone
please post more detail, it is hard to guess, what actually caused it, when you just say, you are stuck in bootloader mode. what driver version shows up in device manager, does the BA's display change from serial to usb, when you connect it to the pc, what error do you get from the RUU, please post the RUU.log in C:\
which rom did you try to flash?
did you use d-two's new RUU?
can you connect using mtty?
the screen changes from serial to usb it has v2.08 at the bottom of the screen
the RUU dosnt register the device cannot conect using mtty
i havent tried to upgrade the device ive tried to leave the device with a battery to see if it will reset to default
but it just loads into the boot screen