HHHHHEEEEELLLLPPPP pleaseee - P3300, MDA Compact III General

I have a Love (Arte300) device that doesn't want to start anymore,when I try to switch on it displays white screen with ipl1.36.0001,spl 1.36.0000,gsm 02.67.90,os 1.36.0.0 versions and it doesn't do anything else,it is impossible to connect to activesync it is possible to connect to the pc only in boot mode ,but when I try to use Artemis_uspl or artemis update rom it asys' error and doen't do it.Please any help for me?
Regards

Related

Urgent Hellp is needed

My Pda 2k device i tryed to upgrade it from 2003 SE to 2k5 after pressing update the device restarted gived me a gray screen and typed on it seril and at the buttom v2.02 now i cant open the device each time i reset or heard rest this is the only screen appears to me i cant even connect to activsync please i need your help what to do to get my device back, this error message i recived (usb device not recognized aslo active sync didnt recognize it)
i need to add a point the device is not working on the USP connection as it have a problem only serial port to connect with the pc
i'm so new here please help me
not to worry.. you can perform a hard reset of your 2k3 version "power+reset" to get you back to at least a working device.. I have been through this and have had this happen to me as well.. try entering bootloader again "power+record+reset" and dock it fairly quickly and it should change to USB on the screen and PC recognize it... also for anyone reading this.. I would highly recommend plugging your cradle into a 5v power supply as I can only imagine most of the bricked BAs are probably due to a computer freezing and/or the PC shutting down power to the USB port only for a fraction of a second and hosing the flash up.
THx Man i will try i hop this will work :lol:

Help!! Universal stuck on boot screen

Hello guys!
I have a big problem with my MDA Pro. I was trying to upgrade rom to JASJAR_ME_13082_171_10900_wwe_ship and my device stuck on boot screen. I tried to hard reset but still I have that problem. Then I tried to upgrade again, but when I connect my device to PC with USB cable, it comes popup window that says USB device not recognized and upgrade software can't read ROM version from device. I tryed with mtty software, but I can't select USB under Ports because it's not listed.
I don't know what to do next, when somewhone can help me I would expreciate it. Thanks...

RGB screen brick I have no clue.. anyone willing to help me?

hey guys... I was away from home while.. my young brother messed up my x01ht..
after turn on the machine 3RGB color screen and stuck.
it says
HERM200
IPL-1.00
HERM200
SPL-1.40.Olipro
USB
I dont know what to do...
can anyone help me out? please....
plug it into your computer by usb and run a rom flash of an oe rom and it should work
based on your SPL (olipro) you will be fine. Download a rom from one of links on this website and run the exe file whilst having your phone connected via USB.
good luck

Cannot enter bootloader mode

Dear Artemis Experts
I have been flashing all updated rom for a while.. The last one I flashed was Dheewatara's rom ARTE_LOVE_WM65_23075_beta1.rar. After that I am not able to flash any more. The reason- I am not able to go to boot loader mode. It just give me white screen.
And when I update it gives me error 260 - update error... check the following...pda phone is connected to usb cable and usb cable is connected to the pc.
I am sure I ll get help here. Please help me.
Thanks
EW
Well..its the card..I need to remove the card
For those who have this problem you can note down

Helllp! My jasjar still on v1.01 :((

HI EVERYONE
When i update my jasjar to win 6.5 that locked and now when i turn on or connect to USB,it's light off screen and show v1.01 on the bottom of screen and USB on top,i try to upadte my rom but i have error 101 but i check my device manager and i see microsoft USB sync (but device center not connected to my phone),JASJAR_ME_13082_171_10900_wwe_ship is my rom that i try to update.
i dont have any other rom.. please helpp me cuz i just know few information about Universal series..
Justphemy said:
HI EVERYONE
When i update my jasjar to win 6.5 that locked and now when i turn on or connect to USB,it's light off screen and show v1.01 on the bottom of screen and USB on top,i try to upadte my rom but i have error 101 but i check my device manager and i see microsoft USB sync (but device center not connected to my phone),JASJAR_ME_13082_171_10900_wwe_ship is my rom that i try to update.
i dont have any other rom.. please helpp me cuz i just know few information about Universal series..
Click to expand...
Click to collapse
if you get a 101 error when the rom update, then steps you have to do is remove SD card and reconnect usb necessarily continue with flash again
TUT to flash in Vista or W7, look at http://forum.xda-developers.com/showthread.php?t=313001
and for ROM WM 6.5 you can check at http://forum.xda-developers.com/showpost.php?p=8210942&postcount=4
fnx for help i got try it..
tnxxxx solvedddddd
Closed as solved

Categories

Resources