sombody messed it up with jafwm, now is dead when i go to bootloader mode
its only serial mode when i connect usb cable windows says unrecognized device and before was ok even when was not powering on windows recognize device. Then i try to flash it again with jafwm and first part of rom was erased but nothing was writen to phone (writting error).
My question is : - is there any possibility to flash it from memory card or by serial cable, or how to fix bootloader ???
br
Try asking Raskal directly or posting here:
http://forums.phone-tools.cn/forumdisplay.php?f=170
Richard
alredy done that couple weeks ago and no reply thats way i am looking for another way to fix it
Hello guys!
I have a big problem with my MDA Pro. I was trying to upgrade rom to JASJAR_ME_13082_171_10900_wwe_ship and my device stuck on boot screen. I tried to hard reset but still I have that problem. Then I tried to upgrade again, but when I connect my device to PC with USB cable, it comes popup window that says USB device not recognized and upgrade software can't read ROM version from device. I tryed with mtty software, but I can't select USB under Ports because it's not listed.
I don't know what to do next, when somewhone can help me I would expreciate it. Thanks...
Hi,
I've tried to upgrading with 9000_WWE_20202_20307_11500.exe found in this forum, but the notebook power off (bad economic mode also with the AC plugged) at the ExtRam update on 1%, just after the Radio.
But when I tried to re-run the program nothing change, just the bootloader v1.01.
Now the program recognize that there are nothing installed and ask to install all new Roms but after the second screen the utility tell me everytime: "ERROR 114 RADIO ROM UPDATE ERROR"
Somebody can help me?
Since the OS ROM is updated in the last step(to be precise, Step 3), you can easily take your device out of this bootloader mode.
1)open MS activesync on your desktop
2)go to connection settings and disable 'incoming USB connections"
3)run the exe(see the attachment)
your device should be out of bootloader mode.
PS: you can re-run the ROM upgrade again after your device gets back to life
Now my Universal is completly OFF
Hi, thanks a lot for your attention, I trye to follow your instructions but now after the Exit of bootloader, I can't update my Universal.
After read dozens of messages... I try to explain better my situation:
1) the first update was blocked by the power off in my notebook in the beginning on the ExtendedRam (1%)
2) after this I tryed to re-run the update program and this recognize NO ROM on my UNiversal and asking for replace with all new ROM, but a "error 114: Radio Rom update" don't let make the update. (that repeated many time and every time I tryed to reset, cold reset, warm reset... following all the messages that explained many different way to de-block the situation)
3) Now the screen is absolutly black and the PC say me taht the "USB Device Not Recognized"
Can you help-me?
Thanks for all...
I've search and now I've found the way
Thanks for your help, I have come back at bootloader mode and I can put in the wm6 version !
Bye
hi,
I've trie to update my qtek and during the update I've got an error.
And now I'm blocked on the boot loader mode...
I've tried the joined program, I disabled the USB connection,
and the program can't connect to USB...
I don't what can I do.
please help me...
seranares said:
hi,
I've trie to update my qtek and during the update I've got an error.
And now I'm blocked on the boot loader mode...
I've tried the joined program, I disabled the USB connection,
and the program can't connect to USB...
I don't what can I do.
please help me...
Click to expand...
Click to collapse
It's ok, after a reboot of my pda & PC, I can exit the bootloader.
Thks for this program
Hello, I have bricked my S8500. I can go to the download menu. The problem is that I can't install properly USB drivers , or maybe it is USB cable that is wrong, the USB cable is from nokia and model is : CA101. Even when the phone was working ok computer couldn't see my wave , and I don't know why... So the problem is that when I go to the Download menu my computer detects all the drivers and everything is alright... And when I hit download I get this.
Download Start Ch[0]
BootLoader 1703.9KB OK[0.7s]
Dbl 281.5KB OK[0.8s]
Wait reset !!
Serial port detect error!
And after Wait reset my computer just didn't recognize my phone anymore, and that's why it has been bricked at the begining. Could anyone please help me? I tried different USB drivers, different PC. Nothing helps :{{{ Please guys, help me.
Maybe it is because my USB cable isn't from original wave, or no?
Nipit said:
Hello, I have bricked my S8500. I can go to the download menu. The problem is that I can't install properly USB drivers , or maybe it is USB cable that is wrong, the USB cable is from nokia and model is : CA101. Even when the phone was working ok computer couldn't see my wave , and I don't know why... So the problem is that when I go to the Download menu my computer detects all the drivers and everything is alright... And when I hit download I get this.
Download Start Ch[0]
BootLoader 1703.9KB OK[0.7s]
Dbl 281.5KB OK[0.8s]
Wait reset !!
Serial port detect error!
And after Wait reset my computer just didn't recognize my phone anymore, and that's why it has been bricked at the begining. Could anyone please help me? I tried different USB drivers, different PC. Nothing helps :{{{ Please guys, help me.
Maybe it is because my USB cable isn't from original wave, or no?
Click to expand...
Click to collapse
I too use Nokia table to flash my samsung wave. If your phone was able to connect to Kies prior to flashing there should be no issues.
When you flash for 1st time you always get that error. Pls try once again and you shd not face any issues.
Datta
No, I wasn't able to connect to kies. I got a USB cable from original xperia x10, still same issue... Can someone tell me what to do? I downloaded a lot of drivers, but maybe there is some special driver? :/
The problem usually goes away for me when flashing from a freshly booted pc, so try restarting one of your computers for flashing and try again.
Have done that too... Any advice? :/
Hello!
First kill all Kies Processes (in the Task Manager)
Second launch Multiloader and try to flash
When it says Serial Error, just do Port Search again, and it should work
That's what I did when I had my Serial Port error ^^
Hope I helped you
Download Start Ch[0]
BootLoader 1703.9KB OK[0.7s]
Dbl 281.5KB OK[0.8s]
Wait reset !!
Serial port detect error!
---------------------------------------------
Just after this message, without quit Multiloader:
Phone on DOWNLOAD MODE try this:
Uncheck Boot, unplug USB Cable from Phone and Plug it again, You will see Download actived in Multiloader, Just clic on DOWNLOAD. And your Flashing will be continued....
----------------------------------------------
Sory For my english.
Still the same **** :{{{ Anymore advices guys?
Darkminus said:
Hello!
First kill all Kies Processes (in the Task Manager)
Second launch Multiloader and try to flash
When it says Serial Error, just do Port Search again, and it should work
That's what I did when I had my Serial Port error ^^
Hope I helped you
Click to expand...
Click to collapse
You didn't understand me very well. The problem is that when I hit download my computer suddenly loses USB connection and shows my phone as unknown device, that is the problem why I bricked my phone. Do anyone knows how to make my pc see my samsung wave?
Nipit said:
Download Start Ch[0]
BootLoader 1703.9KB OK[0.7s]
Dbl 281.5KB OK[0.8s]
Wait reset !!
Serial port detect error!
Click to expand...
Click to collapse
Same thing happened to me. After this, you shouldn't disconnect you wave, but to wait, and click search port again. If there is no port again, tru with different multiloader (mine was v5.65), and there is again same problem, try with another computer with preinstalled USB drivers.
The good thing is that your phone still enters boot mode. If it wasn't the case, then it would be a total brick.
Best regards
Nipit said:
You didn't understand me very well. The problem is that when I hit download my computer suddenly loses USB connection and shows my phone as unknown device, that is the problem why I bricked my phone. Do anyone knows how to make my pc see my samsung wave?
Click to expand...
Click to collapse
No, you didn't understand this flashing process. Most important thing here is to avoid interrupting of connection between computer and phone, even in serial port error. You need to search port again, or to change things that I mentioned above.
You hit download, then bootloader is loaded. It is absolutely normal in this algorithym to reset phone (wait reset). Then our error appears in port error. That is the time when you should click port search again, and when it finds it again (it will) click download button. Thats how it was in my case already 4 times.. Hope I helped.
Best regards
I have told that I reinstalled a lot of drivers and tried different PC's, nothing helps. I tried about 3 or 4 versions of multiloader still same result :/ I don't know what to do anymore... Please any advices? Maybe someone had the same issue?
I don't really know what happened. We switched our cables with my friend again, and I tried to flash with Nokia cable. And everything went okay for the 1 time. No errors, no nothing, no Unknown USB device problem. This is really strange. Thank you for you help friends :}
datta.ca said:
I too use Nokia table to flash my samsung wave. If your phone was able to connect to Kies prior to flashing there should be no issues.
When you flash for 1st time you always get that error. Pls try once again and you shd not face any issues.
Datta
Click to expand...
Click to collapse
i have bricked my s5330 please help
no download mode or even recoverymode please help
I got the same problem too. Windows detects it as Unknown device.
Anyway to fix it? :crying:
[email protected] said:
I got the same problem too. Windows detects it as Unknown device.
Anyway to fix it? :crying:
Click to expand...
Click to collapse
Try to install driver manually from windows driver menu
Just installed "S8500-Driver-V5_02_0_0" now it's working since I wanted to flashback my friend's Wave from Bada2 to v1
Hello guys!
Today i make a big mistake. I want to install CM 14 to my LG g3 . At first i can't go into TWRP . After 1 hour a somehow managed to boot in twrp but after formating the old os the phone is not responsing at all.
Things that i try:
I try to install a bootloader with ADB but the my pc cant recognise the device.
Things that the phone does:
There is no boot screen all it does is led and blue LED is blinking.
If i connect to the pc it recognise it as "Android " but i cant do nothing with it.
Please help me. Thank you
Did you try to connect in download mode and flash stock firmware with the official toolkit? I don't remember it's name though
Balino said:
Did you try to connect in download mode and flash stock firmware with the official toolkit? I don't remember it's name though
Click to expand...
Click to collapse
Yes of course but the pc diden't recognise the phone and it say its " not cot connected"
You need to install device drivers and ADB drivers before trying. Use USB 2.0 ports too, it's acting wired with 3.0 ones