Develop Bugs

made a mistake using mtty

Whilst reflashing my diamond touch with a new rom at the stage where you disconnect and hold vol down and back button to start the rom off I had the back off and the battery fell out. Now if I do the above it comes up saying no image found then says trigger usb host and red flash saying usb retry enter usb. Have I meesed my phone up or is there a way to get the image back any help will be welcomed. I can still connect via mtty but the device doesn't come up in my computer anymore or wont connect via active sync.

tonictone said:
Whilst reflashing my diamond touch with a new rom at the stage where you disconnect and hold vol down and back button to start the rom off I had the back off and the battery fell out. Now if I do the above it comes up saying no image found then says trigger usb host and red flash saying usb retry enter usb. Have I meesed my phone up or is there a way to get the image back any help will be welcomed. I can still connect via mtty but the device doesn't come up in my computer anymore or wont connect via active sync.
Click to expand...
Click to collapse
dont worry .. nothing is lost
bring up the phone in bootloader .. vol down reset
connect the usb cable, on screen should write USB (instead of serial)
and now just run the customRUU.exe file that is usualy in archive you downloaded the rom, and just follow the instruciotions.
(like you are flashing without mtty! from computer)

hi man, have you tryed to reinstall drivers ? i don't know what happends to your phone but i'm really sad for you hope it's nothing That can seriously damage it so if i was you, i'll try to reinstall all drivers and use mtty from the 1st step, may be it will work. feed beck plz

R.seed said:
hi man, have you tryed to reinstall drivers ? i don't know what happends to your phone but i'm really sad for you hope it's nothing That can seriously damage it so if i was you, i'll try to reinstall all drivers and use mtty from the 1st step, may be it will work. feed beck plz
Click to expand...
Click to collapse
Now if I do the above it comes up saying no image found then says trigger usb host
Click to expand...
Click to collapse
he forgot to put image on the phone, or to rename it diamimg.nbh ...
reinstall DRIVERS !?

vicai said:
he forgot to put image on the phone, or to rename it diamimg.nbh ...
reinstall DRIVERS !?
Click to expand...
Click to collapse
yes..youre right..i did the same thing, after i've mtty (after type task 8), i forgot to initiate ROM flash and did hard reset+clear memory, so the image (diamimg.nbh) in movinand memory is erased.
So, we still can flash with custom RUU. bring your device in bootloader, you will see serial mode change into usb, then execute custom RUU.exe. follow the instruction.. but make sure your battery is enough..
Hope it help you..

Thanxs Vicai, did as your post recommended and working fine now, thanxs for the quick response

tonictone said:
Thanxs Vicai, did as your post recommended and working fine now, thanxs for the quick response
Click to expand...
Click to collapse
welcome
glad to help

USB not work

Huhu,
i have issue with my usb connection.
If i connect it to the laptop it say Unknow Device (error code 43). Then it only charge.
I looking up the internet for 2 days now.
Someone said Unknow device is always a driver problem.
Found some driver called samsung/sgs2 driver. But that wasnt working.
Debugging modus also not help me.
Maybe someone have an other idea?

Try this
1. Turn off phone while still plugged in to your computer
2. Press Volume Button Up and then Power button to turn it on in bootloader/or recoverymode
3. You should hear a typical usb connecting sound. (if not you can unplug and plug the usb until you hear it)
4. Unplug it to hear the usb disconnecting sound.
4. Restart your phone and then allow it to turn on as usual, allow it to load everything before.. doing #5
5. Try plugging it in and test.

i tested it but not get a sound.
bootloader say waiting for usb ;/

Uninstall any previous drivers you installed and install these. http://forum.xda-developers.com/showthread.php?t=961956
They worked for me.

These are the drivers i already tried.
But they not work for me ;/

If you're laptop is Windows:
-install Samsung Kies....after that, plug your Glide, there should be a prompt "Installing device drivers" and/or "Searching Windows update..." Wait for that to be done and you should be able to connect.
Same thing with MAC,

I tried that befor but not work ;(
Does i have a chance to flash the phone without usb?
can i install CWM withouth odin?

huhu1312 said:
I tried that befor but not work ;(
Does i have a chance to flash the phone without usb?
can i install CWM withouth odin?
Click to expand...
Click to collapse
There might be a cwm flashable via rom manager soon if we get some testers with stock recovery to join #utkanos on freenode irc.

and someone know how to root without usb?
is there a functionally apk?

huhu1312 said:
and someone know how to root without usb?
is there a functionally apk?
Click to expand...
Click to collapse
So far, only way is through Odin on windows PC

because CPrisic
huhu1312 said:
Huhu,
i have issue with my usb connection.
If i connect it to the laptop it say Unknow Device (error code 43). Then it only charge.
I looking up the internet for 2 days now.
Someone said Unknow device is always a driver problem.
Found some driver called samsung/sgs2 driver. But that wasnt working.
Debugging modus also not help me.
Maybe someone have an other idea?
Click to expand...
Click to collapse
I have the same situation with my glide. But the problem was miserable. Once i've changed USB cable, everything became OK for me (other phones work good with old cable).
Try this. Maybe it could help

Bricked? Wave I (8500)

Seems like my sister got her Wave bricked. Actually, she didnt do anything with it. Its just that the handset is stuck in a boot-loop. So my plan was to reflash FW. I can enter download mode. But when i connect it to a computer, it only gives the error message that the usb device has malfunctioned. I already tried my desktop and my laptop. Anything else I might want to try? Kinda lost here

dabrain23 said:
Seems like my sister got her Wave bricked. Actually, she didnt do anything with it. Its just that the handset is stuck in a boot-loop. So my plan was to reflash FW. I can enter download mode. But when i connect it to a computer, it only gives the error message that the usb device has malfunctioned. I already tried my desktop and my laptop. Anything else I might want to try? Kinda lost here
Click to expand...
Click to collapse
Try to install Kies for the drivers.
Download any firmware you want and flash it.
Best Regards

Well, i have Kies already installed together with newest USB drivers. Still, it says that the USB device is not recognized because it has malfunctioned or so ...

[Q] P350 fastboot bricked

So I used ROMmanager to get clockwork recovery mode. Now when my phone entered the recovery mode it just say:
"Fastboot mode started"
"udc_start()"
If i connect my USB cable to it it says --suspend--
Now i tried using KDZ_FW_UPD in Emergency mode to restore original firmware but it cant find the phone. The log is:
[R&D Test Tools Log File]
10:50:59 : Launching SW update
10:50:59 : Unpacking KDZ
10:51:14 : KDZ file extraced
10:51:17 : Files were extracted.
10:51:17 : LGMobileDL Load.
10:51:17 : Port = -1
10:51:17 : Connecting to phone
10:51:17 : PHONE WAS NOT FOUND!
10:51:19 : ===FINISHED=== ​
I tried this procedure on 2 pcs but no luck. It seems that my phone can't connect to PC with usb cable.
I installed LG Moblie United drivers and disabled the lg modem thing in device manager. I am using Windows xp Proffesional SP3.
So does anyone has any clue what I am doing wrong ? If u need more info just ask.
Maybe if I try from some linux distro it will detect my phone ? But what tools to use then ?

Use fastboot to recover the phone. Check the wiki at the Troubleshooting section.
---------- Post added at 03:31 PM ---------- Previous post was at 03:12 PM ----------
I recommend using drivers latest version. Last time I checked, United Mobile Driver was version 3.7.2 release 4.9.8.1 and Modem Link Driver was 1.0. I'm providing links for download from my personal Dropbox folder because I don't remember from which LG site I downloaded them from.

Vangoda said:
So I used ROMmanager to get clockwork recovery mode. Now when my phone entered the recovery mode it just say:
"Fastboot mode started"
"udc_start()"
If i connect my USB cable to it it says --suspend--
Now i tried using KDZ_FW_UPD in Emergency mode to restore original firmware but it cant find the phone. The log is:
[R&D Test Tools Log File]
10:50:59 : Launching SW update
10:50:59 : Unpacking KDZ
10:51:14 : KDZ file extraced
10:51:17 : Files were extracted.
10:51:17 : LGMobileDL Load.
10:51:17 : Port = -1
10:51:17 : Connecting to phone
10:51:17 : PHONE WAS NOT FOUND!
10:51:19 : ===FINISHED=== ​
I tried this procedure on 2 pcs but no luck. It seems that my phone can't connect to PC with usb cable.
I installed LG Moblie United drivers and disabled the lg modem thing in device manager. I am using Windows xp Proffesional SP3.
So does anyone has any clue what I am doing wrong ? If u need more info just ask.
Maybe if I try from some linux distro it will detect my phone ? But what tools to use then ?
Click to expand...
Click to collapse
i had the same problem few days back... (ROM Manager sucks).... ok.. so.. before connecting the phone to the PC.. remove the battery, press both the volume keys (no need to press the power button)... and connect the usb.. now the cell phone will be in emergency mode.. try launching the software with kdz updater now... it should detect it.. after its detected.. connect back the battery (without disconnecting the USb cord ofcourse)... hope this works.. good luck

Good tip, adding to wiki later...
Sent from my LG-P350 using Tapatalk 2

http://multidroid2.feed.nu/2012/03/27/how-to-unbrickflash-your-optimus-melg-p350-2/

Nothing new to what's already posted in the wiki...

response
madmanzrocks said:
i had the same problem few days back... (ROM Manager sucks).... ok.. so.. before connecting the phone to the PC.. remove the battery, press both the volume keys (no need to press the power button)... and connect the usb.. now the cell phone will be in emergency mode.. try launching the software with kdz updater now... it should detect it.. after its detected.. connect back the battery (without disconnecting the USb cord ofcourse)... hope this works.. good luck
Click to expand...
Click to collapse
Didn't I said i did that ? My PC wont recognize my phone in fastboot or emergency mode, with fastboot being stuck at udc_start() and when i connect USB it says "-- suspend --" ,
I tried this guide madmanzrocks still dont see phone.
deleted lg modem, reinstalled all usb hubs, tried 10 versions of LGunited drivers, used both official update tool and kdz nothing works(can't detect phone), and also tried from cmd.
My problem isn't how to unbrick but rather why my pc won't recognize my phone :/

So, no feedback (USB Device connected sound) when conneting the phone? I assume you have tried all ports available.... Long shot, but maybe the phone's USB connector is dead... You have some background on electronics? If so, you can follow the service manual I reposted recently at the General section to check if the connector is gone (p. 113).

dbarrera said:
So, no feedback (USB Device connected sound) when conneting the phone? I assume you have tried all ports available.... Long shot, but maybe the phone's USB connector is dead... You have some background on electronics? If so, you can follow the service manual I reposted recently at the General section to check if the connector is gone (p. 113).
Click to expand...
Click to collapse
yeah tried all ports, I¨ll try on several other pc's. no connection sound, but phone is charging. I have quite some background on electronics so ill check it out when i try this on couple others pc's. Don't want to dissaemble it quite yet and if it rly is dead repair will probably take more money then i spent to buy it(I got it 2nd hand for around 50 $). It happened before that my PC coudn't recognize some devices but never like this. I ussualy get device not recognized, malfuctioned or smthing like that .

Vangoda said:
yeah tried all ports, I¨ll try on several other pc's. no connection sound, but phone is charging. I have quite some background on electronics so ill check it out when i try this on couple others pc's. Don't want to dissaemble it quite yet and if it rly is dead repair will probably take more money then i spent to buy it(I got it 2nd hand for around 50 $). It happened before that my PC coudn't recognize some devices but never like this. I ussualy get device not recognized, malfuctioned or smthing like that .
Click to expand...
Click to collapse
as I mentioned the same problem was solved bu connecting the cell phone with the battery removed. But if even that doesnt works for you, then maybe there is a fault in your PC. Does your PC instantly recognizes USB Pendrives? And which OS are you using?

madmanzrocks said:
as I mentioned the same problem was solved bu connecting the cell phone with the battery removed. But if even that doesnt works for you, then maybe there is a fault in your PC. Does your PC instantly recognizes USB Pendrives? And which OS are you using?
Click to expand...
Click to collapse
I'm using Windows XP Proffesionall, all the other usb devices at least give a message if my PC can't recognize them. You know that yellow box that pops out saying device malfuctioned or smthing like that.

Hey, i have the same problem, and i also can' t fix it, i tried all ways, but my pc dont detect my phone... so i hope that someone will find a way how to fix it... but it' s not normal what is happening with this phone...

Don't know if it helps or you already tried it.
Start fastboot v2 and start the flash so it waiting for device.
Then plug in usb and start phone in fastboot.
That worked for me before.
Sent from my LG-P350 using xda app-developers app

powerdust said:
Don't know if it helps or you already tried it.
Start fastboot v2 and start the flash so it waiting for device.
Then plug in usb and start phone in fastboot.
That worked for me before.
Sent from my LG-P350 using xda app-developers app
Click to expand...
Click to collapse
Can you please describe step by step, how to do this? maybe it works...

nr4400 said:
Can you please describe step by step, how to do this? maybe it works...
Click to expand...
Click to collapse
I can try.
First start fastboot v2 on your computer.
Load the recoveryimage amonra or cwm5 (not cwm6)
Start flash so it say searching for device.(or something like that)
Plug in usb in computer.
Start your phone in fastboot.
Plug in usb in phone.
If that don't work you can try to instead of start phone first start it with usb cable.
Can need to unplug usb and plug it in a few times if the device say suspend.
Hope it helps.
Sent from my LG-P350 using xda app-developers app

powerdust said:
I can try.
First start fastboot v2 on your computer.
Load the recoveryimage amonra or cwm5 (not cwm6)
Start flash so it say searching for device.(or something like that)
Plug in usb in computer.
Start your phone in fastboot.
Plug in usb in phone.
If that don't work you can try to instead of start phone first start it with usb cable.
Can need to unplug usb and plug it in a few times if the device say suspend.
Hope it helps.
Sent from my LG-P350 using xda app-developers app
Click to expand...
Click to collapse
Can you please add the links to this files or the files? I would be very thanksful...

Up to this point i tried all the methods you guys told me and some i found myself. Nothing worked for me as my PC stil won't recognize my phone, I have also tried all this methods on 4 PCs(2 had windows XP Proffesional SP3 with all the updates, and 2 had Windows 7 SP1 with all the current updates installed(note that 1 version was 32-bit and other was 64-bit).
My conclusion is that the USB connector is DEAD, even thought i can still charge my phone trough it. I probably won't be trying to fix this anymore as I've found an 4th gen iPod and i'll be using that from now on.It is true that i can't make calls(at least not the standard way, you know, it doesn't support SIM cards), but i have my old dumbphone phone for that and this will be used for just about anything else.
So thanks to all of you guys that tried to help me but i fear this is unrepairable. If anyone want's this phone I'll give it to you for free so you can have some fun cracking your head to see what is wrong . I only ask that if you find a way to fix it you post it here and notify me about it(send me pm).Otherwise do whatever you with it.

I have solution
Vangoda said:
So I used ROMmanager to get clockwork recovery mode. Now when my phone entered the recovery mode it just say:
"Fastboot mode started"
"udc_start()"
If i connect my USB cable to it it says --suspend--
Now i tried using KDZ_FW_UPD in Emergency mode to restore original firmware but it cant find the phone. The log is:
[R&D Test Tools Log File]
10:50:59 : Launching SW update
10:50:59 : Unpacking KDZ
10:51:14 : KDZ file extraced
10:51:17 : Files were extracted.
10:51:17 : LGMobileDL Load.
10:51:17 : Port = -1
10:51:17 : Connecting to phone
10:51:17 : PHONE WAS NOT FOUND!
10:51:19 : ===FINISHED=== ​
I tried this procedure on 2 pcs but no luck. It seems that my phone can't connect to PC with usb cable.
I installed LG Moblie United drivers and disabled the lg modem thing in device manager. I am using Windows xp Proffesional SP3.
So does anyone has any clue what I am doing wrong ? If u need more info just ask.
Maybe if I try from some linux distro it will detect my phone ? But what tools to use then ?
Click to expand...
Click to collapse
I had the same problem
1.You must have LG P350 drivers
2.Install KDZ updater
3.Download LG P350 software (I recommend V10c)
Now I will explaine steps
1.You have to charge your battery to 100% (Just leavit on charger in fastboot mode)
2.When you connect your phone to PC hit Start,go on devices and printers and disable USB Modem (Win 7)
3.Take your phone,get the battery out,then hold vol+ and vol- at the same time and plug in USB cable
4.Then you should see cheesy color screen(emergency mode)
5.Put the battery in
6.Open KDZ updater,put Type:3GQCT PhoneMode:Emergency
7.Browse downloaded software in your PC (V10C)
8.Hit ,,Launch software update"
Then just wait max.20min and your phone reboots that is it my fried
If triangle apears on screen just get the battery out and put back in
Let me how it went,or for help on [email protected]

need help
Help pls,i have LG P350 running froyo 2.2.2,and i changed software with KDZ updater to V10c but now i cant reboot in recovery,on the screen appears ,,fastboot mode start",i think i lost recovery image but i dont know hov to install it again on froyo 2.2.2

Masimo x said:
Help pls,i have LG P350 running froyo 2.2.2,and i changed software with KDZ updater to V10c but now i cant reboot in recovery,on the screen appears ,,fastboot mode start",i think i lost recovery image but i dont know hov to install it again on froyo 2.2.2
Click to expand...
Click to collapse
Read the wiki... RTFM!
Sent from my MB525 using Tapatalk 2

[Q] Odin is not detecting phone

i have strange problem with my Samsung galaxy grand i9082 is not detecting in odwin.
phone is detected by pc, its connected as MTP or PTP mode i can transfer file from pc and mobile. but phone is not detected in odin
also when phone in download mode its not detected in odin (pc can detect it)
i have tried all odin version 3.04, 3.07. 3.09 but same problem.
phone was getting detected in odin with stock 4.2, after i flashed to custom ROM probam-20140312-UNOFFICIAL-i9082-k2wl-build9 , its not getting detected in odin.
please help me..
ROM :- probam-20140312-UNOFFICIAL-i9082-k2wl-build9
recovery :- philz_touch_6.19.3-i9082
i have tried with different USB cabled, but same problem phone is deteced by pc but not by odin, same problem on wint7, win xp, i tried it on different pc also...
please let me know what can be done, i want to re-flash to stock 4.1

Install driver software of Samsung and install the kies in pc but dont open tge kies with odin coz it will fail ur flashing process..See whether drivers r installed or else odin will not detect...
Sent from my GT-I9082 using XDA Premium 4 mobile app

U can simply find the sammy drivers (~30mbs) on a thread i made [must read thread]... Install drivers from that... Restart pc/laptop... Open odin and it will br detected, if still not; try inserting usb port about 80% or 90%(sometimes its cable problem, have faced many times ).. Do that nd u will be good to go... Hope i helped
Sent from my GT-I9082 using Tapatalk
---------- Post added at 02:12 PM ---------- Previous post was at 02:10 PM ----------
What i mean is, insert usb anf take it a bit back outside (like 10% of it, )..hope u et what i am saying !..all i mean is try adjusting it fr angles and throughs ....
Sent from my GT-I9082 using Tapatalk

raghavsharmaxda said:
U can simply find the sammy drivers (~30mbs) on a thread i made [must read thread]... Install drivers from that... Restart pc/laptop... Open odin and it will br detected, if still not; try inserting usb port about 80% or 90%(sometimes its cable problem, have faced many times ).. Do that nd u will be good to go... Hope i helped
Sent from my GT-I9082 using Tapatalk
---------- Post added at 02:12 PM ---------- Previous post was at 02:10 PM ----------
What i mean is, insert usb anf take it a bit back outside (like 10% of it, )..hope u et what i am saying !..all i mean is try adjusting it fr angles and throughs ....
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
thanks for help,
issue with my phone is, it's detected by PC but not by odin, so it seems drives are present, also i have installed kies but still same issue....
Will try installing drivers and method you said to insert USB about 80 to 90%.
can i have link for sammy drivers

anup13 said:
thanks for help,
issue with my phone is, it's detected by PC but not by odin, so it seems drives are present, also i have installed kies but still same issue....
Will try installing drivers and method you said to insert USB about 80 to 90%.
can i have link for sammy drivers
Click to expand...
Click to collapse
Yeah.. Then its usb connection problem ...
Wait..lemme give u link for it(but i dont think u need link as u have already installed drivers mahn).....
Sent from my GT-I9082 using Tapatalk

raghavsharmaxda said:
Yeah.. Then its usb connection problem ...
Wait..lemme give u link for it(but i dont think u need link as u have already installed drivers mahn).....
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
tried as suggested, to insert USB cable as 80-90% but no luck, phone gets detected in MTP mode, but not in odin... tried with 4,5 different cables.. but same result (all samsung provided cables only)..
do i need to do any changes in setting, or any other changes ( i have kept USB debugging on. )
is there any other way to flash to custom rom other than odin..

anup13 said:
tried as suggested, to insert USB cable as 80-90% but no luck, phone gets detected in MTP mode, but not in odin... tried with 4,5 different cables.. but same result (all samsung provided cables only)..
do i need to do any changes in setting, or any other changes ( i have kept USB debugging on. )
Click to expand...
Click to collapse
Don't use Samsung cables use different one in my case i used old Nokia usb cable and it worked...

anup13 said:
tried as suggested, to insert USB cable as 80-90% but no luck, phone gets detected in MTP mode, but not in odin... tried with 4,5 different cables.. but same result (all samsung provided cables only)..
do i need to do any changes in setting, or any other changes ( i have kept USB debugging on. )
is there any other way to flash to custom rom other than odin..
Click to expand...
Click to collapse
Are you getting a notification/warning message like USB device not recognized?
Try this too... Go to download mode by pressing the keys... Connect cable to your phone but not to pc. When u press volume up to continue. Insert the cable to usb 2.0 port of your computer.
I mean insert the cable in to PC qt the same time when you press Volume Up key when prompted to continue to download mode.
The above method is just for a try.The problem may be with your phone/drivers. Drivers which are essential to detect usb phone flashing parent. Bt kies is enough.
So may be a problem with your download mode.
Sent From Galaxy Grand running RR 5.0.6

Uninstall all drivers n kies as well....restart ur pc n install again from scratch....n try...it happened with me many times...just suggestion...

DMJoh said:
Are you getting a notification/warning message like USB device not recognized?
Try this too... Go to download mode by pressing the keys... Connect cable to your phone but not to pc. When u press volume up to continue. Insert the cable to usb 2.0 port of your computer.
I mean insert the cable in to PC qt the same time when you press Volume Up key when prompted to continue to download mode.
The above method is just for a try.The problem may be with your phone/drivers. Drivers which are essential to detect usb phone flashing parent. Bt kies is enough.
So may be a problem with your download mode.
Sent From Galaxy Grand running RR 5.0.6
Click to expand...
Click to collapse
Thanks for you help. it worked.. now odin is able to detect my phone.. :good:

anup13 said:
Thanks for you help. it worked.. now odin is able to detect my phone.. :good:
Click to expand...
Click to collapse
Thats Great!! HAppy to hear that :laugh: :good:

DMJoh said:
Are you getting a notification/warning message like USB device not recognized?
Try this too... Go to download mode by pressing the keys... Connect cable to your phone but not to pc. When u press volume up to continue. Insert the cable to usb 2.0 port of your computer.
I mean insert the cable in to PC qt the same time when you press Volume Up key when prompted to continue to download mode.
The above method is just for a try.The problem may be with your phone/drivers. Drivers which are essential to detect usb phone flashing parent. Bt kies is enough.
So may be a problem with your download mode.
Sent From Galaxy Grand running RR 5.0.6
Click to expand...
Click to collapse
Thanks alot man, it worked great! i had the same problem as above!

Odin is not detecting my phone
I have tried almost all methods, but still my samsung i9082 is not detected by odin. And when ever i connect my samsung with laptop during download mode.. One driver is shown as not installed name "CDC serial".
Please help

Not Detecting Odin + Dnt have CWM , and need custom rom
i have same problem , it says Base Station Not Installed ,
1. I am unable to enter to recovery mode it goes on both volume up+ home + power & volume down+ home + power , into download mode .
2. I need to flash custom rom and want any CWM so i can go to recovery mode whenever i want
3. When i factory reset from setting , it only runss on android cartoon , and after that it goes straight to screen , no language selection as we do in all androids after reset by clicking next next , but it goes directly to screen.
Install every driver , and also changed phone , buy another one but same problem
Please sir help me regarding above issues i will be greatful to you .
Thanks & Regards,
Inayat

inayat1988 said:
Install every driver , and also changed phone , buy another one but same problem
Please sir help me regarding above issues i will be greatful to you .
Thanks & Regards,
Inayat
Click to expand...
Click to collapse
What do you mean exactly by changed phone and buy another one?

INVALID IMEIs / SIMS not working
Dear Sir,
I got that i need IMEI fixing as it is showing invalid both imeis. (board is MT6572)
1. Set is LG L Bello , info is given in pix attched please.
2. For rooting Tried almost all methods GUI but all failed rooting.
3. Tried To fix IMEI from MTK-DROID-TOOLS , showing errors, pix are attached.
Please help me to flash CWM , Root my device and fix Invalid IMEIs issue.
Note : all info i considered needed for you to help me, is attached in shape of pix
Best Regards,
Inayat

please help me and save me
please help me my grand 2 is made by Vietnam, and its not detectable in any of the trick mentioned above , please help me , one thing when i plug my mobile with pc , and check the my pc properties , it shows yun os interface .. please help me how i can able to detect this interface with odinn please help ...