RGB screen brick I have no clue.. anyone willing to help me? - 8525, TyTN, MDA Vario II, JasJam ROM Development

hey guys... I was away from home while.. my young brother messed up my x01ht..
after turn on the machine 3RGB color screen and stuck.
it says
HERM200
IPL-1.00
HERM200
SPL-1.40.Olipro
USB
I dont know what to do...
can anyone help me out? please....

plug it into your computer by usb and run a rom flash of an oe rom and it should work

based on your SPL (olipro) you will be fine. Download a rom from one of links on this website and run the exe file whilst having your phone connected via USB.
good luck

Related

HHHHHEEEEELLLLPPPP pleaseee

I have a Love (Arte300) device that doesn't want to start anymore,when I try to switch on it displays white screen with ipl1.36.0001,spl 1.36.0000,gsm 02.67.90,os 1.36.0.0 versions and it doesn't do anything else,it is impossible to connect to activesync it is possible to connect to the pc only in boot mode ,but when I try to use Artemis_uspl or artemis update rom it asys' error and doen't do it.Please any help for me?
Regards

"Dead/No software" Qtek 9000! Need HELP! Please!

My Qtek 9000 just don't wanna turn on. When on USB, my computer says "can not find USB device"! But, when I click "power button" + "light button" + "reset button", on Qtek screen is "USB" on the top of the screen and "v2. 01" on the bottom, and computer finds "USB device".. Still, I don't know what to do and how to turn my Qtek on. Please help me. I need my phone!
Thanks..
Milos
Perhaps a hard reset could help
If not try to reflash a ROM
Instructions here:
http://wiki.xda-developers.com/index.php?pagename=Uni_ROM_Upgrade
Good luck,
Look, I CAN NOT turn my device on. I'm holdind the "power button" but NOTHING!
P.S. I need boot loader v2.01. Can you find it for me please?
I think that I need the corect ROM that I had before "this situation".. Can someone find me a ROM v2.01? Or tell me what to do!?
You are in bootloader mode with USB showing on the top and bootloader version on the bottom. Just connect to your computer and flash another ROM.
The numbers on the bottom are NOT version of the ROM, but a bootloader, just try different ROMs or try shipped ROM for your device, or better still READ WIKI.
enigma1nz said:
You are in bootloader mode with USB showing on the top and bootloader version on the bottom. Just connect to your computer and flash another ROM.
The numbers on the bottom are NOT version of the ROM, but a bootloader, just try different ROMs or try shipped ROM for your device, or better still READ WIKI.
Click to expand...
Click to collapse
Hey Enigma your 500th post LOL ...
and EMO_Raver as you said when you connect your device to computer there is usb onthe top and v2.01 in bottom so it means you have G4 device and you can flash a uni rom G4 one....see instruction in first post by Orb3000...
I was trying to flashi it, but even my PC finds Qtek as new device, when I want to chose "USB" in "port" menu (in mtty), there is only com1, com2 and com3! There is NO "USB", so I cannot flash it!
And when I just click on the "new ROM" icon that I dowonloaded here I always get: ERROR 101 - CONNECTION ERROR
Pleace Check:
1. Your device is properly connected to the USB cable or cradle (of corse it is, my PC founds it as new device)
2. Your USB cable or cradle is properly connected on PC (same as in first, cable is 100% connected)
3. Your device is turned on (it's in booter mode, USB on top and v2.01 on bottom)
So, what is the problem. Someone told me that my softwere died, so I need to "feed" my Qtek with new software, new ROM. Is that a problem? How to do it? HOW TO START MY PHONE AGAIN?
I need help! Asap!
...
what OS do you have on your pc ? windows XP ?
If Vista or Windows Seven u must change driver of Microsoft USB Device ...
ANd be carefull of baterry .. if u will discharged battery u will have big rpoblem ...
FIXED! Thanks everyone!

Cannot enter bootloader mode

Dear Artemis Experts
I have been flashing all updated rom for a while.. The last one I flashed was Dheewatara's rom ARTE_LOVE_WM65_23075_beta1.rar. After that I am not able to flash any more. The reason- I am not able to go to boot loader mode. It just give me white screen.
And when I update it gives me error 260 - update error... check the following...pda phone is connected to usb cable and usb cable is connected to the pc.
I am sure I ll get help here. Please help me.
Thanks
EW
Well..its the card..I need to remove the card
For those who have this problem you can note down

Htc Touch Pro2 Dead..please help me

hello friends I open this topic for people who can help me know how or had the same problem
I upgrade some systems and languages in htc but this went to sleep hehe
I was wrong in the script file of the Touch Spl Pro2, wrote the spl of the mega Touch2 and obviously my touch pro 2 Dead
Now does not enter boot mode, no driver recognizes Qualcom only connects to the USB and turn the orange LED
attempt to direct cable com mtty but not very well as
I hope you can help me is the first time it happens
thanks
b,r
A hard reset may be the only sollution....
Hard reset isn't going to help if the phone won't boot !
So you wrote the SPL of a different phone to your TP2 ? That doesn't sound good
JTAG only
Jackos said:
JTAG only
Click to expand...
Click to collapse
JTAG=Joint Test Action Group ????
jepp, but no one has figured out the pins yet
If someone does it, can it be used to connect the "dead phone" to PC to get it flashed???
Muahaha, yes. But trust me, that's NOT so easy as you think. This requires EXTREME skill.
Thanks, are you working on it then..?
Are you kidding me?! Too hard for me, despite the fact I'm studying Electronics X_x
You can do it as a case study, in your class...
yes my htc tp2 is dead only on led orange when connect usb
not enter in mode boot
no recongize drivers qualcom
I know that just is repair via jtag but I think and believe exist other solution
i will make cable serial for connect the htc via com direct for
format the internal memory and after reflash the spl and wm
someone has image
JTAG pins TP2???

(Q)uk orange spv m2000 locked in bootloader

hi everyone ive had this problem with my spv m2000 being stuck in bootlad mode
i just cannot find a way out of it
i dont have a manual for the device
any help would be greatly recived
i have read through the htc blueangel service manual posted by chef tony but carnt get any response from the handset
ghostmachine said:
hi everyone ive had this problem with my spv m2000 being stuck in bootlad mode
i just cannot find a way out of it
i dont have a manual for the device
any help would be greatly recived
i have read through the htc blueangel service manual posted by chef tony but carnt get any response from the handset
Click to expand...
Click to collapse
Have you Windows 7?
i have windows xp and a windows 7 pc
the phone was running wm 2003
in case you tried upgrading from windows 7 you should follow d-two's tutorial here: http://forum.xda-developers.com/showpost.php?p=5456317&postcount=6
i have followed the guide and got nothing
its still in bootloader v2.08 i just hope its not a faulty phone
please post more detail, it is hard to guess, what actually caused it, when you just say, you are stuck in bootloader mode. what driver version shows up in device manager, does the BA's display change from serial to usb, when you connect it to the pc, what error do you get from the RUU, please post the RUU.log in C:\
which rom did you try to flash?
did you use d-two's new RUU?
can you connect using mtty?
the screen changes from serial to usb it has v2.08 at the bottom of the screen
the RUU dosnt register the device cannot conect using mtty
i havent tried to upgrade the device ive tried to leave the device with a battery to see if it will reset to default
but it just loads into the boot screen

Categories

Resources