HI ! i'm a tytn 1 owner and have decided upgrade my ppc under wm5 to wm6. when i enter in bootloader mode , the pc doesn't recognize my ppc (nb : when i connect the pc to my ppc via activesync , it works well but doesn't in bootloader mode ! what shall i do ???
try this links man!!!
http://forum.xda-developers.com/showthread.php?t=369434
http://forum.xda-developers.com/showthread.php?t=340468
http://forum.xda-developers.com/showthread.php?t=296722
http://forum.xda-developers.com/showthread.php?t=293665
Good Luck!!!
do it through sd card method
well, i also think so some times ago that my ppc is not connected to the pc in boot loader mode. but remember that when u r in boot loader mode, the active sync connection is not active but u see the usb written in boot loader mode. which means that ur ppc is connected to the pc. thats works in my case, hope it'll help u also.
Post 1160 on page 116 of the Hard SPL thread in upgrading... Easy steps to update Hard SPL using the sd card method...
Related
I did upgrade my hp ipaq 2210, but it didnt succesfull.
Now my ppc doesnt show any thing (not windows and not bootloader screen), and two LED (blue and orange) are on, and cant connect to USB.
HELP ME PLZ
How can i restore the bootloader ? (i cant use mtty and activesync, becuse my PC cant detect the ppc over USB)
HELP ME PLZ
p.s. : sorry for my english problems.
Hi,
I would like to know is there any way that i can just reflesh//update my Rom without connecting my PC. Becasue my diamond cannot connect//Sync to my PC. So im finking if i reflesh my Rom, would it be able to slove the problem or not .
And please advice any solutions which can slove my problem .
Hiaos said:
Hi,
I would like to know is there any way that i can just reflesh//update my Rom without connecting my PC. Becasue my diamond cannot connect//Sync to my PC. So im finking if i reflesh my Rom, would it be able to slove the problem or not .
And please advice any solutions which can slove my problem .
Click to expand...
Click to collapse
you did not use search did you? if you had... you would have come up with a solution in 5 minutes...
anyhow - i hope you know this: http://forum.xda-developers.com/showthread.php?t=416211
and then read this: http://forum.xda-developers.com/showthread.php?t=450681
you need to put the file from your PC to internal storage - you can do this via bluetooth OR if you can connect the phone as disk drive...
good luck! (and please search! it will save you time )
cloudedhopes said:
you did not use search did you? if you had... you would have come up with a solution in 5 minutes...
anyhow - i hope you know this: http://forum.xda-developers.com/showthread.php?t=416211
and then read this: http://forum.xda-developers.com/showthread.php?t=450681
you need to put the file from your PC to internal storage - you can do this via bluetooth OR if you can connect the phone as disk drive...
good luck! (and please search! it will save you time )
Click to expand...
Click to collapse
sorry for not doing 'homework'.
Anyway,according to the 2nd link you gave me, i followed all the instructions and 'suiller's instruction', i still couldnt flash it, the screen keeps showing 'image not found' and ' triggering USB host'. while my phone did not connect to my pc
here you are
http://forum.xda-developers.com/showpost.php?p=3435475&postcount=71
Extract the RUU_Diamond_HTC_Ship.exe file to a new directory on your PC
Find the RUU_signed.nbh file in this new directory and rename it to Diamimg.nbh
Copy Diamimg.nbh to the root of Internal Storage
Hold in the volume down button + the back button (thats the top right button on the front to the right of the big middle jog control) + soft reset
Follow instructions on screen
When the process is complete (it will say UPDATE SUCCESS) then reset
hard spl before flashing a unsigned rom!!!
mugglesquop said:
hard spl before flashing a unsigned rom!!!
Click to expand...
Click to collapse
An unsigned!
Hiaos said:
sorry for not doing 'homework'.
Anyway,according to the 2nd link you gave me, i followed all the instructions and 'suiller's instruction', i still couldnt flash it, the screen keeps showing 'image not found' and ' triggering USB host'. while my phone did not connect to my pc
Click to expand...
Click to collapse
ok first of all... we need to make sure u have HARD SPL... for that, you need to connect to computer...
try this to make sure it's not a USB cable or port issue...
remove any cable
go to bootloader "enter Bootloader by pushing the red reset button (on the back) while holding volume down key on the side"
you will see some a tri-color screen... and it will read Serial at the bottom... NOW connect USB to computer and wait for a minute and two... the "SERIAL" should now read "USB"...
if this works... then keep the phone connected and follow the HARDSPL instructions from :
http://forum.xda-developers.com/showthread.php?t=416211
first post, Section A
if it does not change to "USB" then it's a port / cable issue... try another cable or a diffirent port on your computer...
goRt said:
An unsigned!
Click to expand...
Click to collapse
hello
i have a uni who stuck on bootloader (BL) bl- v2.01
i use tomal 8.7, browsing aplication and find storage manager (some with partition program... ) and my uni was frozen after reboot ... (long story)
i turn (BL) and want to reflash my rom to other version, but my uni don't want it
i run a mtty/putty and want to do a DoC format, but programs don't want to connect with uni, i try a lot of usb cable, usb ports and a 4 computers with Winxp. i use a few version of mtty and uni exit bootloader, hx4700 bootloader...
and dosent works
yy windows not reconize uni show msg unknown device.
some screeens
http://esiu.kom.pl/universal
uni has no sim or sd card.
Hard reset dosen't works
BL keeps serial when i connect it to pc don't turn to "usb" only shows serial
ps. sory for my english
ps2. hmm i think i brick this uni testing storage manager ( option with unmount partiion or something)
ps3. please a sugestion to repair uni
Hello,
I think if you look on HERE the all will be there for you to sort out your problem
Regards
Jay
hmm ive read many times universal wiki and i dont find there a solution.
i think when i "using" storage aplication in tomal 8,7 i delete a partition then it "stuck"
uni in bl mode when plug usb cable don't change to "usb" stuck on "Serial"
if usb cable is pluged in when i turn bl mode when "usb" shows but dosent react with pc ... don't recognize it, active sync have unmarked 'usb connections'
Do you have your SD card and Sim card out of the PDA??
If you cannot see
Serial changing to USB on your device, I say your USB port is damaged and that prevents you from flashing any ROM or device being recognised by PC.
hmm so my port in uni is dameged? ok its software damage or hardware damage ? 10 minutes before uni was stuck i change rom few times.
my diamond stucks in the bootlaoder when i put into the pc i don't get usb, the pc says qualcomm cdma technologies msm searh driver but i dont have it please help
Sounds like you need to flash from your phone as per instructions from other thread:
First make sure you flash Hard SPL then
Extract the RUU_Diamond_HTC_Europe_2.03.401.2_Radio_Signed_Dia mond_52.51.25.26_1.09.25.23_Ship.exe file (or whatever one you are wanting to flash) to a new directory on your PC
Find the RUU_signed.nbh file in this new directory and rename it to Diamimg.nbh
Copy Diamimg.nbh to the root of Internal Storage
Hold in the volume down button + the back button (thats the top right button on the front to the right of the big middle jog control) + soft reset
Follow instructions on screen
When the process is complete (it will say UPDATE SUCCESS) then reset
If it says rom image not found then you may need to follow the thread about stuck at 0-5% and use NBH util to mod the image to change the model ID
ketie007 said:
my diamond stucks in the bootlaoder when i put into the pc i don't get usb, the pc says qualcomm cdma technologies msm searh driver but i dont have it please help
Click to expand...
Click to collapse
Hi
It is look like you are trying to flash a GSM rom to a CDMA diamond. you should read the CDMA section about your problem. Do not try any GSM roms on the CDMA device, as far as i know GSM rom won't work.
Good luck
the phone just crashed, i didn't wont to update my ram, wen i want to hard spl i dont find a phone
when i hard reset the phone says
trigger usb host....
retry enter usb....
don't find a map in explorer to
what can i do is the phone for the bin
help me please
Your device in bootloader state. Can you see the connection changes from serial to usb? If confirmed so you have a good chance to go further!
Do you have a appropriate active sync driver on your computer? Did it work before? If confirmed you should activate - Connection Settings - so the PC can detect your HTC device by usb
You know the rest of the procedure!
Deleted post
i dont see any progress, i sopose i've dont have the driver,
the bootloader stays on serial and the active sync didn't find the connection
ketie007 said:
i dont see any progress, i sopose i've dont have the driver,
the bootloader stays on serial and the active sync didn't find the connection
Click to expand...
Click to collapse
Hi
Disconnect phone from usb then reconnect to usb.
In pc install activesync driver which will be found by pc itself.
If this is not successfull left diamond connected and restart the pc it will automatically install activesync driver.
then flash a rom from pc.
Good luck
hi everyone ive had this problem with my spv m2000 being stuck in bootlad mode
i just cannot find a way out of it
i dont have a manual for the device
any help would be greatly recived
i have read through the htc blueangel service manual posted by chef tony but carnt get any response from the handset
ghostmachine said:
hi everyone ive had this problem with my spv m2000 being stuck in bootlad mode
i just cannot find a way out of it
i dont have a manual for the device
any help would be greatly recived
i have read through the htc blueangel service manual posted by chef tony but carnt get any response from the handset
Click to expand...
Click to collapse
Have you Windows 7?
i have windows xp and a windows 7 pc
the phone was running wm 2003
in case you tried upgrading from windows 7 you should follow d-two's tutorial here: http://forum.xda-developers.com/showpost.php?p=5456317&postcount=6
i have followed the guide and got nothing
its still in bootloader v2.08 i just hope its not a faulty phone
please post more detail, it is hard to guess, what actually caused it, when you just say, you are stuck in bootloader mode. what driver version shows up in device manager, does the BA's display change from serial to usb, when you connect it to the pc, what error do you get from the RUU, please post the RUU.log in C:\
which rom did you try to flash?
did you use d-two's new RUU?
can you connect using mtty?
the screen changes from serial to usb it has v2.08 at the bottom of the screen
the RUU dosnt register the device cannot conect using mtty
i havent tried to upgrade the device ive tried to leave the device with a battery to see if it will reset to default
but it just loads into the boot screen