hello everyone
My amazon fire tv 2 is stuck in the amazon logo and that happing after I do wipe using TWRP is there any we to factory reset or what can I do to fix the issue.
thanks
jalajil said:
hello everyone
My amazon fire tv 2 is stuck in the amazon logo and that happing after I do wipe using TWRP is there any we to factory reset or what can I do to fix the issue.
thanks
Click to expand...
Click to collapse
Maybe you wiped system?
Follow this guide:
[UNLOCK][ROOT][TWRP][UNBRICK] FireTV 2 (sloane)
Read this whole guide before starting. This is for the 2nd gen Fire TV (sloane) Current relase: amonet-sloane-v1.1 NOTE: This process does not require you to open your device if you're already rooted or you have TWRP. NOTE: If something goes...
forum.xda-developers.com
thanks for reply
yes I think I wipe system
Is it possible fix that?
I hope the experts can help me to solve the issue.
jalajil said:
I hope the experts can help me to solve the issue.
Click to expand...
Click to collapse
No one can fix it for you. You need to follow this guide in order to fix it yourself:
[UNLOCK][ROOT][TWRP][UNBRICK] FireTV 2 (sloane)
Read this whole guide before starting. This is for the 2nd gen Fire TV (sloane) Current relase: amonet-sloane-v1.1 NOTE: This process does not require you to open your device if you're already rooted or you have TWRP. NOTE: If something goes...
forum.xda-developers.com
If you follow the guide from the link to the letter up to the end, your device will boot into twrp. Tthere you can flash a new rom.
thanks, sus_i for your reply
yes of course I will follow the guide
I try to follow th step but how i connect PC with the AFT i have a a a cable but i did not know how i restore the systam
That what i get when i connect the AFT
please advise
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you click on the link above, you see that you need to open your box up and that you need to short a special point in the box, showed on a picture. Then there are two scripts you need to run until you reach TWRP recovery. There you can flash a new system and wipe data, factory reset.
Hello
Thanks for reply
I think the debugging is not enabled because when i try to list the device show no device.
Is there any way to force debugging enabled?
I had the same problem with my jvc fire tv been stuck on the amazo fire tv logo, and, tried factory resetting and all sorts of other advice but no joy! I was just replying to see you had any luc resettin your tv
Related
[SIZE=+3]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Stock+ Team is proud to present
Kindle Fire Launcher Debug Mode Enabled
[/SIZE]
And here we are with fresh modifications to Kindle Fire Device!
After we saw a huge potential this little baby (kindle fire in this case) can do, we decided to add it to our MOD portfolio.
As for now we are actively working on Samsung Galaxy S (GT-I9000), Samsung Galaxy S 2 (GT-I9100) - search for us over xda-developers forum
Who we are?
We are group of modders/developers in love with android devices
Why?
Because we can't fight this addiction
[SIZE=+2]DOWNLOAD
++STOCKPLUS_Launcher_Debug_Mode_BLAZE_6.2.1_user_3103920_1326318901.zip++[/SIZE]
If you think this mod is usefull to you, click "Thanks" and consider donation by clicking donate me button under my profile.
We need one more kindle fire device for our devs, so this donation will be good for community
IRC Channel:
http://webchat.freenode.net/
##stockplus <- yes, double ##
Changelog:
Initial release
----------------------
- Default Kindle Fire launcher with Debug options enabled!
Click to expand...
Click to collapse
Install instructions
- Install TWRP recovery using Kindle Fire Utility
- upload this zip to kindle fire
- boot into TWRP and DO BACKUP!
- install this mod
- wipe cache/dalvik cache
- reboot
Click to expand...
Click to collapse
READ THIS!
[size=+1]ALWAYS DO BACKUP OF PRECIOUS DATA BEFORE FLASHING!! IM NOT TAKING RESPONSIBILITY FOR DATA LOSS!
FLASHING THIS PACK/KERNEL/ROM MAY (OR NOT) CAUSE DATA LOSS (SMS, CONTACTS, SETTINGS , APPS) - YOU HAVE BEEN WARNED![/size]
That's quite a lot of post you've got there. So what is it?
pokey9000 said:
That's quite a lot of post you've got there. So what is it?
Click to expand...
Click to collapse
It enables Debug Mode in the stock launcher. It basically lets you modify some settings of the stock launcher....fling values and friction values and what not.
Oh and it also shows your FPS in the bottom right corner.
Can this be installed with the default kindle app on CM7?
No, it work only on default firmware
Grooby said:
No, it work only on default firmware
Click to expand...
Click to collapse
The link is dead, keeps loading
I wanted to root my kindle fire so i followed the instructions in this thread
http://forum.xda-developers.com/showthread.php?t=1399889
(Kindle Fire utilities)
The procedure worked perfectly but...several apps tells me that the device is not rooted and the file system is read only.
I downloaded OTA rootkeper and that's what I see:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The device is rooted but I don't have any permission?
So I wanted to root because I wanted the Google Play marketplace and the tool has failed because I see every google app but the marketplace (yes I'm using a custom launcher).
Now I want to UNroot, just turn to the out-of-the-box defaults and be able to view my amazon prime videos.
I used the adb method to unroot the device from the windows command prompt but it says that I can't make any changes, again, because I have no permission (read only).
Can you please help me to get rid of this?
Thanks
The only way to 'unroot' that I know of is reflashing the stock software from amazon... get TWRP on it and try that.
Dicoluc said:
I wanted to root my kindle fire so i followed the instructions in this thread
http://forum.xda-developers.com/showthread.php?t=1399889
(Kindle Fire utilities)
The procedure worked perfectly but...several apps tells me that the device is not rooted and the file system is read only.
I downloaded OTA rootkeper and that's what I see:
The device is rooted but I don't have any permission?
So I wanted to root because I wanted the Google Play marketplace and the tool has failed because I see every google app but the marketplace (yes I'm using a custom launcher).
Now I want to UNroot, just turn to the out-of-the-box defaults and be able to view my amazon prime videos.
I used the adb method to unroot the device from the windows command prompt but it says that I can't make any changes, again, because I have no permission (read only).
Can you please help me to get rid of this?
Thanks
Click to expand...
Click to collapse
From the way you explain, I'm sure that your KF is rooted but Superuser is not is *not* install. So just install it.
adb install Superuser.apk
To unroot, remove Superuser, remove /system/xbin/su, and rename /system/bin/check_rooted.bak to check_rooted
Gửi từ Kindle Lửa của tôi qua Tapatalk 2
As of now, I'm trying to unbrick my kindle fire 1st generation, but my computer isn't recognizing it as ADB, only as Android, is there anyway to get it recognized as ADB so I can install twrp and flash a rom?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
carlybelle said:
As of now, I'm trying to unbrick my kindle fire 1st generation, but my computer isn't recognizing it as ADB, only as Android, is there anyway to get it recognized as ADB so I can install twrp and flash a rom?
Click to expand...
Click to collapse
Try updating the driver in driver settings. That was the problem with my PC once. I just updated and ADB was recognized
Sent from my Amazon Kindle Fire using xda app-developers app
404-Not Found said:
Try updating the driver in driver settings. That was the problem with my PC once. I just updated and ADB was recognized
Sent from my Amazon Kindle Fire using xda app-developers app
Click to expand...
Click to collapse
Nope, but thank you anyway, the problem is that my kindle fire has no os and it's just stuck at the stock boot up screen without any recovery...
You need a Fastboot cable/adapter/etc.
You can make one yourself by soldering 4th contact/the one with the missing spot to the 1st contact (red wire/power wire).
And then you can use whatever to recover.
AND make sure you use Kindle Fire FIRST GENERATION SOFTWARE. OTHERWISE YOU WILL BRICK AGAIN, AND THEN, COMES JTAG.
mr_verystock said:
You need a Fastboot cable/adapter/etc.
You can make one yourself by soldering 4th contact/the one with the missing spot to the 1st contact (red wire/power wire).
And then you can use whatever to recover.
AND make sure you use Kindle Fire FIRST GENERATION SOFTWARE. OTHERWISE YOU WILL BRICK AGAIN, AND THEN, COMES JTAG.
Click to expand...
Click to collapse
Okay thank you!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I got plugged the factory cable in and the screen diaplayed "fastboot kindle fire" as expected . However, when I used this tool http://forum.xda-developers.com/showthread.php?t=1951254 the newest one (KFHD_SRT_v1.3.5- 7.3.0 (seperate option for restoring factory recovery) )
the tool only displayed waiting for the devices , also I chose the first and third option, same thing happed help me guys.
I'm guessing your fastboot drivers aren't installed, look for a device with an yellow triangle in the device manager probably called tate , might say jem or otter2, and tell it to update drivers and point it to where you would have downloaded and extracted the drivers in my signature.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
I'm guessing your fastboot drivers aren't installed, look for a device with an yellow triangle in the device manager probably called tate , might say jem or otter2, and tell it to update drivers and point it to where you would have downloaded and extracted the drivers in my signature.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Oh thank you for replying. I got everything fixed. However, I want to flash CM11 on it. I have TWRP 2.6.3.1 and the ROM in the internal storage. I followed the instruction: install newest custom recovery, factory reset and flash the rom. TWRP fail at the flashing rom part. it said something about blaze tablet and otter2 I don't know.Can you help me.
You tried to flash a kf2 ROM on a kindle fire HD 7", they aren't compatible. You need to download the correct ROM in the 7" HD development section.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
You tried to flash a kf2 ROM on a kindle fire HD 7", they aren't compatible. You need to download the correct ROM in the 7" HD development section.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
thank you so much. IT works perfectly.
Hi
i search a root for my fire tv stick 4k with Fire OS 6.2.8.0
thanks in advance
No root possible, patched with 6.2.8.0
hi
can i downgrade or can i do something similar with my fire tv stick ?
I think no, with 6.2.8.0 a efuse was burned. No downgrade at this time.....
ok! thanks
i have another with fire tv stick ( i think its a fire tv stick 3, dont know )model number : S3L46N.
i have buy it via ebay and its blocked by Amazon i dont get updates on inital.
its possible to unblock the fire tv stick ?
Should be tank.
[UNLOCK][ROOT][TWRP][UNBRICK] Fire TV Stick 2nd gen (tank)
Read this whole guide before starting. This is for the 2nd gen Fire TV Stick (tank) Current relase: amonet-tank-v1.2.2.zip NOTE: Recent reports indicate a change that disables brom DL-mode The change seems to have been introduced with devices...
forum.xda-developers.com
Than use lineageos.
[ROM] [unlocked] [tank] LineageOS 12.1
DISCLAIMER: We are not responsible for any damage, bootloop, bricked or broken devices and Relationships. Need an unlocked tank with amonet patched recovery...
forum.xda-developers.com
thanks a lot
where is the Short CLK to GND on this stick ? there is no photo to short
this is a pic from the open fire tv stick
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ohh this looks like a Firetv Lite 2020.
For this is also no root Available.
Sorry
But you can try the Mantis Script.
Maybe it works...
Other side if pcb.
[UNLOCK][ROOT][TWRP][UNBRICK] Fire TV Stick 4K (mantis)
NOTE: There have been multiple reports of devices with serial numbers containing VM190 or higher being shipped with DL-Mode disabled in BROM. These devices cannot be unlocked using kamakiri. These devices do not show up at all on USB when...
forum.xda-developers.com
ok other side looks like this .where is the pin to shorten
Luigello said:
ok other side looks like this .where is the pin to shorten
Click to expand...
Click to collapse
Left side short to shield and use mantis script
in terminal i got onlz this info>
[[email protected] ~/Downloads/kamakiri]# ./bootrom-step.sh
[2021-04-21 08:36:57.870295] Waiting for bootrom
Short stick and the connect usb cable, wait for remove short.
If it not work, it is a patched 4k or the New lite and no root is possible.
Sorry