My last phone was the Z Flip. I managed to learn to open it and close it with one hand quite easily. The opening was a little awkward, with a thumb and then a 'Star Trek' flip to fully open. Closing was easy, and very satisfying after a phone call
I've been trying with the Fold. I definitely cannot open it with one hand, at least yet. Closing it is awkward. Because you must press on the screen, it really needs to be off. That's not just two hands, but a button press too.
I'm trying to learn to close it by using my rh index finger at the centre top. The reason is that there's nothing on the screen there to be pressed on. It's ok, but still awkward, even though I have big hands. Im generally ok with managing the problem. The ability to carry a tablet in my pocket makes it worthwhile to me.
How do others close, and also open, the Fold? Is it just as awkward?
Long term use could loosen the joints enough to make one-handed folding operation require lesser effort
jeromepearce said:
My last phone was the Z Flip. I managed to learn to open it and close it with one hand quite easily. The opening was a little awkward, with a thumb and then a 'Star Trek' flip to fully open. Closing was easy, and very satisfying after a phone call
I've been trying with the Fold. I definitely cannot open it with one hand, at least yet. Closing it is awkward. Because you must press on the screen, it really needs to be off. That's not just two hands, but a button press too.
I'm trying to learn to close it by using my rh index finger at the centre top. The reason is that there's nothing on the screen there to be pressed on. It's ok, but still awkward, even though I have big hands. Im generally ok with managing the problem. The ability to carry a tablet in my pocket makes it worthwhile to me.
How do others close, and also open, the Fold? Is it just as awkward?
Click to expand...
Click to collapse
I can't open it with one hand, either. I open it like a book. I also close it with two hands, but I can close it without turning it off, but I usually don't need to do so. I rarely use the front screen.
hands must have the dexterity and flexibility of a contortionist worm
I would not recommend pressing your thumbs on the screen to close the device. I use bezel on both sides of the screen to close it.
OJsakila said:
I would not recommend pressing your thumbs on the screen to close the device. I use bezel on both sides of the screen to close it.
Click to expand...
Click to collapse
I'm failing to work out how you can bend the phone inwards by only pressing on the bezel on the front of the screen.
Edit: ok, I get it, the thumbs on the bezel and push up from behind with fingers. Yes, that is safer. I have large fingers, too so I pretty much always touch the screen as well, unfortunately.
I still want to use only one hand, though.
Yes! That's how I do it... You figured out.. I've been doing it that way ever since the Fold 1. I read somewhere how pressure on the screen was a killer in that first phone.. I'm just in a habit now of doing it that way
What I know is that thingies on fold 3 is tighter than fold 2 and fold 1. Which makes it harder to open with 1 hand.
Jake.S said:
What I know is that thingies on fold 3 is tighter than fold 2 and fold 1. Which makes it harder to open with 1 hand.
Click to expand...
Click to collapse
That is true Samsung has made the hinge in the Fold 3 much tighter than that on the previous versions of the Fold.
I have huge hands (can palm a basketball with ease), and I can't OPEN the phone one handed. I need another hand or something (like my chest) to grip part so I can open it.
Closing it one handed is a breeze. Just push down on the middle of the hinge on the bottom of the phone (NOT THE SCREEN) and once it starts to close, I can just close it with my hand without an issue.
Related
First off, I just got my tilt2 from stores yesterday, and I must say, I love it so much! Just got a few concerns...
For those of you who have the tilt2, when the screen is tilted all the way up, is there a "looseness" of about 2-3 degrees? Meaning, theres just a small portion of the tilt2 at its most "tilted moment," so to speak, that it just wiggles back and forth for about2-3 degrees? It's not too big of a deal really as the current tilting of the tilt2 seems MUCH more sturdy (and it will probably last much longer holding its tilt feature), but I want to know if its a physical defect on my current tilt2, or that's just how its made for whatever reason.
Also, I am quite worried about how much looser the top screen portion of the tilt2 is from the bottom keyboard when closed all the way as compared to my original tilt. If I were to slightly use my hands to grab each separate part and pull them apart gently, it is easy to see that it easily lifts, and if I pulled any harder, I can almost break those halves apart, whereas my first tilt BARELY budged even after 2 years of use. Basically, everything about the tilt2 is better, but it seems like it won't be able to take much of a beating as compared to the tilt1.
Just concerned about inevitable wear-n-tear, and its effects itll have in the long run, or couple of months even. Thanks in advance for future input!
Regards,
K
The 2-3 degrees of wobble is normal from what I've read. Mine has it too. It's slightly unfortunate, but doesn't really cause any practical problems.
I have read at least one report of a screen that can be separated from the body by a lot when closed. He said he could fit 15 (I think) playing cards in there, which mine most certainly could not fit. I never had a tilting phone before to compare to, but I am satisfied with my closed gap, which only goes up to about 1mm with light separating pressure. If your gap is much larger than that, it may be one of the less well attached screens.
I have the same problem with my tilt 2. Its abit annoying when you press in the screen on the left side of the device in portrait mode with the keyboard closed and the screen pushes in because of the gap but I don't beleive its a defect. I have seen some sturdier as my buddy's tilt 2 have zero play but his keyboard is hitting the bottom of the device and has scratched some keys so I would take mine any day. Plus I don't wanna chance it and take it back for an exchange as what you get may be worse.. IE - Dead pixel, screen QTY, keyboard lights, an even more loose slider, etc, etc.
enisoc said:
The 2-3 degrees of wobble is normal from what I've read. Mine has it too. It's slightly unfortunate, but doesn't really cause any practical problems.
I have read at least one report of a screen that can be separated from the body by a lot when closed. He said he could fit 15 (I think) playing cards in there, which mine most certainly could not fit. I never had a tilting phone before to compare to, but I am satisfied with my closed gap, which only goes up to about 1mm with light separating pressure. If your gap is much larger than that, it may be one of the less well attached screens.
Click to expand...
Click to collapse
Thanks for your reply, makes me feel at ease. Also, I think you've misunderstood, my gap is as small as you say, and from your words, it must be normal. It's when I intentionally put pressure on the screen and keyboard (not that I would do that on a normal basis, just for initial inspection purposes) that makes the gap wider. Though, I guess with a tilting screen like this, theres less tightness between the screen and keyboard. But nonetheless, all is normal. I was only concerned with those when I purposely applied my own force. I was not use to how much more delicate this machine, the tilt2, is as compared to my brick of a tilt1.
Regards,
K
Raspster said:
I have the same problem with my tilt 2. Its abit annoying when you press in the screen on the left side of the device in portrait mode with the keyboard closed and the screen pushes in because of the gap but I don't beleive its a defect. I have seen some sturdier as my buddy's tilt 2 have zero play but his keyboard is hitting the bottom of the device and has scratched some keys so I would take mine any day. Plus I don't wanna chance it and take it back for an exchange as what you get may be worse.. IE - Dead pixel, screen QTY, keyboard lights, an even more loose slider, etc, etc.
Click to expand...
Click to collapse
Yes, that was one of my que's from the start.
It was when the whole device was closed and I was playing with the touch screen, you could feel the screen go down a bit as I applied pressure to it. It was almost like if i pressed any harder, the bottom of the screen would just keep hitting the keyboard. But hey, glad to see that this seems to be a normal thing.
Regards,
K
PS. Oh and yes, I noticed it when I tapped on the left side of the screen as well.
I really dislike where its positioned, especially as its on the front "half" of the top, so you have to stretch your finger around that much more to hit it
and it feels really flimsy and has like a really week feedback/mechanism to it. have a feeling theres going to be lots of them breaking/packing in already
I'm not delighted with it coming from a G1 but getting used to it.
What I don't like is the positioning - it is right where it rests against my left hand when typing in portrait mode.
This is not a huge issue though on an otherwise superb phone.
Anyone know if there is an app that mimics the pressing of this button? When I'm finished doing whatever I like to lock the phone myself rather than wait for the timer to do it, the button placement annoys me so a quick app shortcut would be nice, or even better a hardware button re-assignment as I never use the search key.
I think once we get root access this could be done. For now there is the option of using alternate lock screen apps from the market. But for now we're stuck with the power button. This is my ONLY problem with my Desire. Not even a problem more a niggle.
Doesn't bother me in the slightest personally
cheesebanana said:
I really dislike where its positioned, especially as its on the front "half" of the top, so you have to stretch your finger around that much more to hit it
and it feels really flimsy and has like a really week feedback/mechanism to it. have a feeling theres going to be lots of them breaking/packing in already
Click to expand...
Click to collapse
I thought mine was the only one like this. I am sure once companies start to produce form fitting cases, this will take care of it.
Once "rooting" of this phone starts to get underway...some sort of program will allow the phone to be unlocked without having to use the "unlock" button alone. Or at least remapping the hardware buttons
I am planning to buy either MT4G or G2, I like the feel of the G2 more but since this is my last month in the US and it will be hard to replace the phone , I am worried about future physical problems. For those who had the G2 for more than a month , does the hinge really cause you any problems with normal usage? like texting , holding the phone , put it in your pocket? browsing the web? Does the screen close with normal usage? Did you notice any problems with building quality ?
nope, i think im one of the only ones that dont.
In my experience the hinge is really only a pain in the ass when you're actually inspecting it and testing it's quality, I mean I don't have a problem with it at all from day to day use. Other than the hinge it's a great phone to have and it would be a shame to let a little imperfection ruin it.
the hinge isnt a problem, its only a problem if YOU make it a problem (yes some do have faulty hinges) but in reality, this phone follows Murphys law and the laws of gravity. or w/e....my phone seems fine.
p.s. AS long as you use the phone in the intended way it was supposed to be used. then you shouldnt have a probem what so ever.
no. the hinge on mine work fine. I barely even open it thanks to swype.
hinge is so problem. if it's not this loose, this phone is ok. and what makes me frustrated is some can get not loose hinge but mine is this loose. it's hard to hold so the display doesnt fall.
holding the phone with keyboard closed is also like shaky.
MassimoM2 said:
hinge is so problem. if it's not this loose, this phone is ok. and what makes me frustrated is some can get not loose hinge but mine is this loose. it's hard to hold so the display doesnt fall.
holding the phone with keyboard closed is also like shaky.
Click to expand...
Click to collapse
Even with normal usage? like texting while walking or sitting?
Let me put it this way: I'm a 15 year old kid and I can't hold it with the keyboard open without holding onto the screen as well. So it'd be pretty much impossible for the screen to "fall" down on me.
Sent from my T-Mobile G2 running Cyanogenmod.
raeef said:
I am planning to buy either MT4G or G2, I like the feel of the G2 more but since this is my last month in the US and it will be hard to replace the phone , I am worried about future physical problems. For those who had the G2 for more than a month , does the hinge really cause you any problems with normal usage? like texting , holding the phone , put it in your pocket? browsing the web? Does the screen close with normal usage? Did you notice any problems with building quality ?
Click to expand...
Click to collapse
The only down fall of the hinge is when you are in bed trying to txt or do something. But I found a way to cure that. I type with one thumb and the other thumb holds the screen up lol
Or u can just swype.
Other than that I love this phone..its soo powerful and impresive. Good job HTC.
Of you use swype, your qwerty use will be minimal
Sent from my T-Mobile G2 using XDA App
never had a problem with the hinge ever.
I have issues with my hinge from time to time, If im holding my phone at a certain angle while using the hardware keyboard the screen somemtimes falls and it is a bit shaky, and for those who say just use swype what's the point of owning the G2 if you don't use the hardware keyboard at all???
The Hinge's poor design doesn't detract much from the overall greatness of this phone. But after holding DOZENS have G2's I'm pretty sure that's how they all are... nobody has a G2 hinge as tight as the G1 hinge, and it' impossible just based on the design.
It is a little loose even when closed if you press in the right spots.... it's not awful but some find it more annoying than others. My girl has a Droid 2 Global, and her sliding mechanism is as tight as a 14 year old Amish girl.... but her phone can't compete with mine on any other level.
sinistersai4d4d said:
The Hinge's poor design doesn't detract much from the overall greatness of this phone. But after holding DOZENS have G2's I'm pretty sure that's how they all are... nobody has a G2 hinge as tight as the G1 hinge, and it' impossible just based on the design.
It is a little loose even when closed if you press in the right spots.... it's not awful but some find it more annoying than others. My girl has a Droid 2 Global, and her sliding mechanism is as tight as a 14 year old Amish girl.... but her phone can't compete with mine on any other level.
Click to expand...
Click to collapse
14 year old Amish girl. Aha. WIN!
To be honest, the hinge will never be a problem thanks to swype.
Other than the few times i pull good old qwerty out to type my retardedly long password that contains symbols and letters and numbers, I always use Swype for everyday messages. It's so easy to use and so fast.
And if you do want to use the qwerty keyboard, here's a hint:
Put the inside bottom half of both your index fingers on the part of the phone where the top and the bottom are still connected together after the screen has slid up, and the top part of ur indexes hooked around the phone resting on the back panel. The pressure from the bottom part of your index fingers will keep the screen up.
This is the natural way I held the phone while typing and am surprised at people who complain about the screen sliding down while typing, cuz they would have to hold it pretty retardedly to get the screen to slide down.
I myself don't have a problem with the hinge. Some people might if they use a holster, so just be careful if you holster it. Also my wifes phone actually pops open in her purse which drains the battery sooner. I also had that happen while in my hoody pocket.
I have a simple, if not botched, solution for it though. When you get the phone, the cord and headset have a nice small black rubber band on them. Its the perfect fit for this phone. I just stretch it around bottom over the track pad. Its easy to pull off and holds the phone snugly closed.
Sent from my T-Mobile G2 using XDA App
I have yet to have a hinge problem, but I find myself continually changing volumes accidentally.
Sent from my T-Mobile G2 using XDA App
...6 weeks and the hinge is still tight.
Sent from my T-Mobile G2 using Tapatalk
my hinge is loose but it is no problem for me even when i type upside down in bed because the base of my index fingers support the screen so i have no problem whatsoever with the phone falling down on me
its been very tight for me. I dont think there is anything to worry about. i dont see anything going wrong with it unless you abuse it severely over time.
I recently picked up a cheap, generic lanyard for use with the Note and have found that it completely changed the way I hold and use the phone. It makes holding the phone a lot more comfortable and allows for full single hand usage of the phone. Also, I have done some drop tests and it pretty much drop-proofs the phone (linked below is a video of a drop test I did). I HIGHLY recommend getting one of these, if only for the increased flexibility it gives you when using it single-handed.
How it Helps Single-Handed Use
Because the lanyard I got has a clip on it I am able to detach the lanyard part of it and just have a little “tail” of sorts on the phone. I almost always have this tucked between my middle and ring finger when holding the phone, as it allows me to comfortably hold the phone without needed to support it from the bottom of the phone with a finger. It is hard to explain, so I took a video of it (linked below). This manner of holding the phone means that the ONLY part of the hand that needs touch the phone is the middle and ring fingers on the center of the back plate of the phone. The traction from the skin on the back plate keeps it from moving left/right, gravity keeps it from moving up, and the string connecting the bottom of the back plate to the tips of my middle/ring fingers keeps it from falling. It basically feels like the phone is floating in your hand when holding it like this. It allows you not only to comfortably hold it and use your thumb, but use both your thumb and index finger for zooming and panning as well! And, if you tilt the phone in your hand, you can reach ANY part of the screen with your thumb. You can manipulate the phone however you like, by doing this, without fear of dropping it because the string is firmly between the two fingers.
(This video is in HD so you can press the 720P button and make it fullscreen to see more)
http://www.youtube.com/watch?v=QMQ32JT3Uk8
Drop-Proofing
The video shows it the best but you can drop the phone however you want and it will be caught by the lanyard every time. The back plate is fit so securely into the phone that it does not budge, not a single clip of the back plate has come undone in any of my tests (and in one of my tests I flung it around in a circle on the end of the lanyard). Quite amazing really, defeats the need for an OtterBox for me.
(This video is in HD so you can press the 720P button and make it fullscreen to see more)
http://www.youtube.com/watch?v=kXFOAuDcmRU
More Pics
Pic 1
Pic 2
Pic 3
----
If you like this post thank me by pressing the 'Thanks' button
A+ for creativity.
Hey, watched your vids. How are you using this 1 handed? It looks like you've somehow got the thick part of the lanyard up close to the phone in that video...
nice work.
By the way, did you hurt your finger doing this mod ?
copualt3: Thanks!
gerizafa:
Hopefully the linked photo below illustrates it more clearly. I simply tuck the lanyard attachment between my middle and ring finger and it holds the phone.
http://i66.photobucket.com/albums/h260/piranha_pilot/IMG_0988.jpg
blobotorian:
Thanks! And lol no I didn't, I accidentally cut myself while absent-mindedly taking knives out of the dishwasher.
would it **** u off if the back cover fell off and ur phone smashed?
bamboo12 said:
would it **** u off if the back cover fell off and ur phone smashed?
Click to expand...
Click to collapse
I too use a lanyard, but have mine attached to the flip case back (also at the speaker hole).
Firmly pulling the flap away from the lanyard, and nothing happens. It's not coming off by accident.
BTW... I have a much smaller lanyard with nice leather detailing. Without ever consciously thinking about it, I have gotten into the havit of leaving the lanyard dangling out of my pocket, and my hand subconsciously goes through the lanyard every time I take the phone out of my pocket.
I plan on using a Nillkin TPU case which has strap holes and an SGP Asturias leather handstrap on my imaginary Note. I say imaginary because it's all just an idea, I might get one, I might not. The dev community is so good for the SGS2 that I'll just miss having so many options and tweaks.
@unsinkable can u post some pictures
I did this exactly, sturdy at first but I kind of have the feeling that plastic grill will break some day.
Still better than having the whole phone break after a fall tho.
Not having included a proper lanyard hook like in SGS2 was a huge shortcoming for note designers. SGS2 had the con of an unproperly placed lanyard in the top part of the phone, but still!
I'm finding it rather difficult to get my lanyard's string through my speaker phone grill.
It is in fact hard, the typical lanyard end-cords are thicker than the space avaialble in the grill, but if you push attentively enough, or use the help of a tiny object like a de-tipped needle, to push the loop in the middle for you, it is then pretty easy to do the job.
manhattan212 said:
I'm finding it rather difficult to get my lanyard's string through my speaker phone grill.
Click to expand...
Click to collapse
Hmm just remove the back plate first and then tuck it in and out?
broke mine.
My lanyard broke the little bar behind the speaker.
I personally don't think much force was used to make this happen.
It didn't break it off completely, just one side. So I pushed it back in, so that cosmetically it looks ok -but I certainly can't attach a lanyard on it again.
I'll have to find a case/shell with a lanyard loop.
Incidentally, does anyone know if it's possible to get a replacement back panel?
manhattan212 said:
My lanyard broke the little bar behind the speaker.
I personally don't think much force was used to make this happen.
It didn't break it off completely, just one side. So I pushed it back in, so that cosmetically it looks ok -but I certainly can't attach a lanyard on it again.
I'll have to find a case/shell with a lanyard loop.
Incidentally, does anyone know if it's possible to get a replacement back panel?
Click to expand...
Click to collapse
Metal ones to be found on ebay
Sent from TapaTalk on my Samsung Galaxy Note
thanks for the vids . .
but seems a bit much to wear a wrist leash to carry a cell phone?. .
manhattan212 said:
I'll have to find a case/shell with a lanyard loop.
Click to expand...
Click to collapse
Please share if you do find one. I'd also be interested in a case with a lanyard loop spot!
mcatt66 said:
thanks for the vids . .
but seems a bit much to wear a wrist leash to carry a cell phone?. .
Click to expand...
Click to collapse
I thought so at first but it soon becomes 2nd nature (5 weeks now)
zkyevolved said:
Please share if you do find one. I'd also be interested in a case with a lanyard loop spot!
Click to expand...
Click to collapse
the ringke case in the thin case thread has lanyard holes
zkyevolved said:
Please share if you do find one. I'd also be interested in a case with a lanyard loop spot!
Click to expand...
Click to collapse
Nillkin has one. They're fairly easy to find on ebay. I think they have multiple colors, or something.
I've been holding off buying the S III for some time in hopes of something better, but nothing has come along so I finally bit the bullet. I bought a new white one off ebay for $450, which is on the cheaper side. It came with a rather deep scratch on the bottom right on the chrome, but frankly its hard to notice and the rest of the phone seems to work fine. Wanted to ask a few questions and make a few comments.
1. Screen is the best AMOLED screen period. The lack of reflection and infinite viewing angles puts it head and shoulders above all phone IPS screens I've used. Also on a completely different level to the beta AMOLED screens Samsung was churning out. None of the pixelation, dithering, artifacts, lines, blotches, and crap from the S II or the Note. It doesn't turn to crap when I dim the screen, and looks very nice and even like that. The saturation has been toned down as well and looks better. However, I wish the greens were not so BLUE and the skin tones were less ghastly red/yellow/orange.
2. My volume keys are firm and clicky, but my power button is kind of loose. Will it deteriorate over time?
3. The battery cover is still a horrible design. My left side snaps into place completely, but there is a gap that you can put a fingernail and also feel the seam and slight hump since its not flush. This is normal for Samsung right? My Note also had a battery cover problem. It would ot snap in, and I had to jam it in at a very sharp angle and bend the cover back heavily. At least that was flush. This one is not. Also noticed looseness on the top corners with the S3, especially when you move the phone around or hold it in landscape and either push the corners a bit or hold onto them. I think this is endemic to the S3 since all the display phones at my local store had the same problem, along with the entire cover being taped up since they were coming off of course.
4. The home button is hard to press. I also noticed this on the demo models. Why couldn't it be more like the iPhone's button? The amount of force required to push it, its location at the very end of the phone, and the lightweight nature of the phone means I have to hold the phone firmly down or the entire thing just might bounce out of my hand. I usually have to hold the bottom underneath the button and pinch down with my thumb. That's not very satisfying either, since I am also pushing up into a looser part of the back cover and it flexes a bit, especially since there's that hole where the microUSB plugs into. I try to avoid using the home button and use back all the way if possible.
5. The phone is fast, but not blazingly fast or smooth. It's better than my old One X. Still far from the smoothness of a Windows Phone device. Hopefully Jelly Bean will help a lot.
6. They need to disable the capacitive keys during camera mode. I always end up pushing one or both of them and exiting the camera or getting edit popups. Same problem I had on the Note.
7. Phone looks and feels a million times better without the rim sticking out above the glass surface. It's more prone to damage, but I'll take the look and unimpeded finger swiips any day.
8. The Note had a much much better speaker. The S3 sounds like an S2 without the back cover helping muffle it.
katamari201 said:
I've been holding off buying the S III for some time in hopes of something better, but nothing has come along so I finally bit the bullet. I bought a new white one off ebay for $450, which is on the cheaper side. It came with a rather deep scratch on the bottom right on the chrome, but frankly its hard to notice and the rest of the phone seems to work fine. Wanted to ask a few questions and make a few comments.
1. Screen is the best AMOLED screen period. The lack of reflection and infinite viewing angles puts it head and shoulders above all phone IPS screens I've used. Also on a completely different level to the beta AMOLED screens Samsung was churning out. None of the pixelation, dithering, artifacts, lines, blotches, and crap from the S II or the Note. It doesn't turn to crap when I dim the screen, and looks very nice and even like that. The saturation has been toned down as well and looks better. However, I wish the greens were not so BLUE and the skin tones were less ghastly red/yellow/orange.
2. My volume keys are firm and clicky, but my power button is kind of loose. Will it deteriorate over time?
3. The battery cover is still a horrible design. My left side snaps into place completely, but there is a gap that you can put a fingernail and also feel the seam and slight hump since its not flush. This is normal for Samsung right? My Note also had a battery cover problem. It would ot snap in, and I had to jam it in at a very sharp angle and bend the cover back heavily. At least that was flush. This one is not. Also noticed looseness on the top corners with the S3, especially when you move the phone around or hold it in landscape and either push the corners a bit or hold onto them. I think this is endemic to the S3 since all the display phones at my local store had the same problem, along with the entire cover being taped up since they were coming off of course.
4. The home button is hard to press. I also noticed this on the demo models. Why couldn't it be more like the iPhone's button? The amount of force required to push it, its location at the very end of the phone, and the lightweight nature of the phone means I have to hold the phone firmly down or the entire thing just might bounce out of my hand. I usually have to hold the bottom underneath the button and pinch down with my thumb. That's not very satisfying either, since I am also pushing up into a looser part of the back cover and it flexes a bit, especially since there's that hole where the microUSB plugs into. I try to avoid using the home button and use back all the way if possible.
5. The phone is fast, but not blazingly fast or smooth. It's better than my old One X. Still far from the smoothness of a Windows Phone device. Hopefully Jelly Bean will help a lot.
6. They need to disable the capacitive keys during camera mode. I always end up pushing one or both of them and exiting the camera or getting edit popups. Same problem I had on the Note.
7. Phone looks and feels a million times better without the rim sticking out above the glass surface. It's more prone to damage, but I'll take the look and unimpeded finger swiips any day.
8. The Note had a much much better speaker. The S3 sounds like an S2 without the back cover helping muffle it.
Click to expand...
Click to collapse
1. There is a setting in display settings to adj screen tone. See if that helps.
2. Some have reported this, but mine is fine. Not loose at all.
3. The battery cover while flimsy i agree, should snap on with ease. No raised or humped section, no gap for a fingernail... almost sounds like yours took a nasty fall or other impact... it should fit just fine with no blemishes.
4. Home isnt hard to push. Agree though that it couldve been implemented much better.
5. Imho, this thing screams. Never had any problems with lag or not being smooth and speedy. Top of the line if you ask me.
8. Speakers fine for me, for what it is. I never expect the external speaker to be super high quality.
Sent from my SGH-T999 using xda app-developers app
On the screen issue, have you gone out to broad daylight and trying to see the screen? Its tough. I still prefer IPS screens.
The home button is hard to press. Being accustomed to only capacitive buttons, the home button is tough to press. Even more so with my ballistics case.
The back is plastics but it gets the job done
The power button is sturdy and fine on my end
I agree with the camera button.
I also got mine from eBay about a month ago for 469 and although it was used, it was kept and very good condition. All I have is a small line on the gray part of the phone by the volume button that only extends about 2 mm. Sometimes I forget its there. The screen is my biggest letdown. Coming from 2 LG devices, the IPS screen is the best screens in my opinion. Natural colors, awesome brightness. This one is good I enjoy it but its not great.
Sent from my Rooted Gameboy
Hey man.. Cool thing you got an s3 but if I was you, I would of waited til tomorrow for the nexus 4 and paid 100$ less.
Sent from my SGH-T999 using xda app-developers app
Crisisx1 said:
Hey man.. Cool thing you got an s3 but if I was you, I would of waited til tomorrow for the nexus 4 and paid 100$ less.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I played with an Optimus G in-store, basically a Nexus 4. Did not like it AT ALL. The glass was icky. Was not impressed by the display. It was washed out looking. This is in comparison to the One X and iPhone, not just AMOLED.
IPS is better outdoors and at max brightness. However, indoors at low brightness the contrast looks way better on the AMOLED screen of the GS3.
Oh man the 5" HTC Droid DNA is coming out. If it can be unlocked for GSM networks, I'm itching the jump again...haha I had the Note two months ago too.
I'm getting buyers remorse from the build quality. Just holding or moving the phone around and taking it out of my pocket, there's always a creak or a flex from the loose back cover. The phone is kinda slippery and clammy, not much to hold on to, and the jiggly power button. I said I would never buy another Samsung phone because of build, but here I am again...a sucker for the screen!
3. My battery cover is perfectly flush. I have pulled it off to change sd cards and once when initially rooting.. I simply put it in place and smoothly press the edges while moving around the whole phone.. all click in, flush
5. check to see if Power saving mode is on, and if cpu saving is on in power saving ... if it is, chances are your phone is only hitting 1GHz
when power saving is off (via the handy toggle in the notification shade dropdown), phone is allowed to hit full 1.5 GHz
another reason for some speed loss is the samsung touchwiz environment.. beautiful, but a bit heavy
jellybean from a google/nexus base IS faster, but mainly cuz it is more bare
cheers!
Samsung Galaxy S3, 16GB, pebble blue
rooted, running jellybean 4.1.1 on touchwiz-based Xquizit xD rom