Couple days ago warp charge suddenly stooped working. No fast charge either. Charging at about 5-6%/hour. no system changes remotely coincide, wiped cache tried various wall outlets. Any method possible to determine the root cause weather power adapter or cable or device.
Thanks in advance.
shorty1993 said:
Couple days ago warp charge suddenly stooped working. No fast charge either. Charging at about 5-6%/hour. no system changes remotely coincide, wiped cache tried various wall outlets. Any method possible to determine the root cause weather power adapter or cable or device.
Thanks in advance.
Click to expand...
Click to collapse
Try to reinstall the whole OS then? You tried with other cable?
surdustef said:
Try to reinstall the whole OS then? You tried with other cable?
Click to expand...
Click to collapse
Unable to test another cable since don't know anyone with a oneplus device. I do get charging but very slow.
I will try to reinstall the fast boot rom fresh & see what happens, sure hoped to avoid that tho.
Now i can't get adb to recognize the device at all. It is charging but regardless of how USB is configured it won't do anything, not even request for authorization. Tried rebooting both devices, wiped cache, revoked authorization, toggled USB debugging & flashed back to stock kernel. Guessing factory reset is the last option at this point unless someone has a better idea.
Thanks
Additionally it isn't recognized as a storage device or anything. Going to try another machine in the morning, maybe mine has seen better days.
Tried new machine & won't do anything. Not even recognize to install driver
shorty1993 said:
Tried new machine & won't do anything. Not even recognize to install driver
Click to expand...
Click to collapse
I guess your phone has a usb problem. Might need a repair
Maybe stupid thought but check your usb-c slot, maybe something got inside
Related
i'm running aokp build 30. i'm wanting to flash a new rom but all of a sudden my phone is not being recognized by my PC. can't mount storage and its not showing up even in odin. never had problems till now. i've tried different cables and usb slots but no matter what i do its not being recognized. any ideas? plz help? thx in advance.
also, the phone will charge plugged into pc but wont do anything else.
mcniglet said:
i'm running aokp build 30. i'm wanting to flash a new rom but all of a sudden my phone is not being recognized by my PC. can't mount storage and its not showing up even in odin. never had problems till now. i've tried different cables and usb slots but no matter what i do its not being recognized. any ideas? plz help? thx in advance.
also, the phone will charge plugged into pc but wont do anything else.
Click to expand...
Click to collapse
Have you rebooted your computer? Reinstall driver? Perhaps try another USB port...
ndmoh1 said:
Have you rebooted your computer? Reinstall driver? Perhaps try another USB port...
Click to expand...
Click to collapse
tried all of those.
Are you using Kies for the drivers? I thought Kies interfered somehow and it was recommended to just install the full driver setup standalone.
Also, have you tried a different pc yet?
Also make sure you have USB Debugging enabled.
tdunham said:
Are you using Kies for the drivers? I thought Kies interfered somehow and it was recommended to just install the full driver setup standalone.
Also, have you tried a different pc yet?
Click to expand...
Click to collapse
havent tried a diff pc yet, however i can get into recovery but it wont format anything nor can i do a factory reset, it just sits there until i pull the battery "formating system/data/etc"
just tried new pc. it showed up on it but when i odin anything it hangs on "data.img". bricked?
mcniglet said:
havent tried a diff pc yet, however i can get into recovery but it wont format anything nor can i do a factory reset, it just sits there until i pull the battery "formating system/data/etc"
just tried new pc. it showed up on it but when i odin anything it hangs on "data.img". bricked?
Click to expand...
Click to collapse
Possibly. Have you tried to odin the one-click-root back to stock rooted yet?
First thing I would do personally. Also, swap cables again and try a different usb port. I would plug into the rear usb if possible too. Front usb ports are prone to interference since they're wired via a cable from the motherboard. And do not use a usb extension cable (found this out the hard way too). Good luck.
mcniglet said:
havent tried a diff pc yet, however i can get into recovery but it wont format anything nor can i do a factory reset, it just sits there until i pull the battery "formating system/data/etc"
just tried new pc. it showed up on it but when i odin anything it hangs on "data.img". bricked?
Click to expand...
Click to collapse
Agreed with previous poster - you may be bricked, seems oddly familiar to this issue:
Stuck at "Data.img" thru Odin
As sfhub has mentioned you can and should try the Odin OC again to confirm. But if it says the same it's fairly certain that the eMMC is damaged and the phone is bricked.
If you try again and it has the same results you may want to post more details on that thread. It's been a good attempt to try and document each person's case and try to find what is causing this to happen. The more info the better to troubleshoot, such as what you tried to flash and how you were flashing (were you going back to GB + CWM to flash ICS, for example)
Since yesterday my phone refuses to charge while booted into android (CM 10.1.2 Stable).
However it has absolutely no problems charging while turned off, in bootloader or hboot.
Also it will not be detected by PC usb so I can't flash a different ROM. What the hell is going on?
How do I get out of this mess?
Just to be clear I've already hard resetted the phone. It would appear that the usb drivers on the phone are to blame?
Need some help guys.
satwikpanda said:
Since yesterday my phone refuses to charge while booted into android (CM 10.1.2 Stable).
However it has absolutely no problems charging while turned off, in bootloader or hboot.
Also it will not be detected by PC usb so I can't flash a different ROM. What the hell is going on?
How do I get out of this mess?
Just to be clear I've already hard resetted the phone. It would appear that the usb drivers on the phone are to blame?
Need some help guys.
Click to expand...
Click to collapse
Install HTC drivers in your PC again.
virgolib said:
Install HTC drivers in your PC again.
Click to expand...
Click to collapse
Here's what I've tried so far:
Reinstalled HTC drivers
Installed a different recovery
Installed a different ROM with a stock kernel
VOodOO magic
Nothing has worked so far.
If I turn the phone off I can use adb to flash ROMS and such. However USB will not work when the device is on:
No charging or data transfer over USB. Otherwise phone appears to be working perfectly.
satwikpanda said:
Here's what I've tried so far:
Reinstalled HTC drivers
Installed a different recovery
Installed a different ROM with a stock kernel
VOodOO magic
Nothing has worked so far.
If I turn the phone off I can use adb to flash ROMS and such. However USB will not work when the device is on:
No charging or data transfer over USB. Otherwise phone appears to be working perfectly.
Click to expand...
Click to collapse
Hace you open USB debugging on?
virgolib said:
Hace you open USB debugging on?
Click to expand...
Click to collapse
Yes its on.
My digitizer has also been wonky lately. Wondering if the 2 issues are related.
satwikpanda said:
Yes its on.
My digitizer has also been wonky lately. Wondering if the 2 issues are related.
Click to expand...
Click to collapse
It's was happened to me with Sony Xperia Z, when usb debugging on all are working, but actually it's not a normal condition.
My pc is windows64bit and happening this problem so changed to win32 all are OK, So I think this may be driver conflict in PC.
Therefore if possible you try with another PC.
virgolib said:
It's was happened to me with Sony Xperia Z, when usb debugging on all are working, but actually it's not a normal condition.
My pc is windows64bit and happening this problem so changed to win32 all are OK, So I think this may be driver conflict in PC.
Therefore if possible you try with another PC.
Click to expand...
Click to collapse
Tried different cords and PCs.
Even wall chargers do not work.
Also comfirmed that a middle strip of around 10% of my screen area is dead to touch.
All signs indicate hardware damage. Might take it to HTC to get fixed now.
satwikpanda said:
Tried different cords and PCs.
Even wall chargers do not work.
Also comfirmed that a middle strip of around 10% of my screen area is dead to touch.
All signs indicate hardware damage. Might take it to HTC to get fixed now.
Click to expand...
Click to collapse
Yes it will be sure hardware failure, sorry.
I recently updated the firmware on my M7 thru santo040 [ROM]|Radio|Firmware post. I was on 4.10.605.3 and upgraded to 5.28.605.2 , I also updated the radio as well.I am currently on BONESTOCK v4.3. I did this process at work and everything worked. As I got home and plugged my phone in the wall charger I noticed a slow charge notification. I selected don't show this again and hit ok. As i got to work the next morning i wanted to change to the dark boot screen. But when I plugged the phone into the PC this time I get a windows error stating that this usb device malfunctioned. So I thought it was the driver so I reinstalled the driver and get the same error. I even plugged it into my home PC and get the same error. Has anyone experienced this issue? Your help would be greatly appreciated.
ANYONE
jcharles1 said:
ANYONE
Click to expand...
Click to collapse
Have you tried a different usb cable?
We're you on that Rom when you updated the firmware?
I tried several cables and different PCs. ROM is Bonestock v4.3
Also constantly getting slow charge notification when I plug it in the wall charger at home. Original charger
Have you tried to see if PC recognizes the device in bootloader or recovery to rule out the ROM somehow being the culprit?
jcharles1 said:
I tried several cables and different PCs. ROM is Bonestock v4.3
Click to expand...
Click to collapse
I'll ask again:
We're you on that Rom when you updated the firmware?
Click to expand...
Click to collapse
I was on the Bonestock Rom
Uzephi said:
Have you tried to see if PC recognizes the device in bootloader or recovery to rule out the ROM somehow being the culprit?
Click to expand...
Click to collapse
PC doesn't recognize it. Before the update it did tho
jcharles1 said:
I was on the Bonestock Rom
Click to expand...
Click to collapse
That slow charge notification is generally only seen when using a non oem cable.
Best I can suggest at this point, is trying a different cable and a different usb port.
I know you said you tried from two different computers and several cables, but something isn't right, or the pc should recognize the device properly.
I am on the latest firmware and so are many others and I've had no issues using adb, fastboot, or file transfer and haven't seen any other reports of such.
Not sure what has or has not been done to the boot.img in that rom, but it could be that it does not have adb enabled or you do not have usb debugging enabled in Dev settings?
Not really sure what else to suggest at this point.
Sounds to me like a bad cable though, especially if you are getting the low charge notification from it, it likely won't transfer data.
santod040 said:
I'll ask again:
Click to expand...
Click to collapse
No. was running Bonestock
santod040 said:
That slow charge notification is generally only seen when using a non oem cable.
Best I can suggest at this point, is trying a different cable and a different usb port.
I know you said you tried from two different computers and several cables, but something isn't right, or the pc should recognize the device properly.
I am on the latest firmware and so are many others and I've had no issues using adb, fastboot, or file transfer and haven't seen any other reports of such.
Not sure what has or has not been done to the boot.img in that rom, but it could be that it does not have adb enabled or you do not have usb debugging enabled in Dev settings?
Not really sure what else to suggest at this point.
Sounds to me like a bad cable though, especially if you are getting the low charge notification from it, it likely won't transfer data.
Click to expand...
Click to collapse
I unchecked and check usb debugging several times. The cable I'm using are different. I have one for my desk at work and for home.
Is there another way to enable adb. Everything was working fine before the updated of the firmware. I even tried to restore a backup to an earlier date. no avail
I need help, my ZF2 suddenly cannot be detected by my windows 7 laptop and pc. When I tried to plug in usb 3 port, it wont get detected. If in usb 2/1 port, it will be detected but with the yellow exclamation mark. I tried updating mtp but it wont update (shows device is up to date). I tried reinstalling ROM and factory reset thru the ROM, but still not working.
I returned to stock but still it wont get detected on my pc or laptop. I ****ed everthing up when I returned to stock since I cant root it back anymore since it wont get detected by adb.
Evereything is up to date including 15sec adb installer 1.4.2 or 1.4.3 and intel usb driver 1.10 from 1.9.
I will try to reformat thru stock recovery and see if it will work. But before doing that, any suggestion or ideas?
Does it charge while connected to the laptop?
Have you tried using other micro USB cables?
FrameCall said:
Does it charge while connected to the laptop?
Have you tried using other micro USB cables?
Click to expand...
Click to collapse
Yes, it charged when I plugged it on different port. And yes, I have tried different cables, samsung, asus and dont know brand chords. All cables only shows usb device malfunction code 43 and all charged my phone when plugged to ports.
Anybody? Suggestions? Ideas?
Anyone?
Can you check and see if fast charging works?
24imelqui said:
Anyone?
Click to expand...
Click to collapse
Which recovery you installed?
trinimike100 said:
Can you check and see if fast charging works?
Click to expand...
Click to collapse
Fast charging dont work anymore. It will take atleast 2 hrs to charge the phone.
mr_gourav2000 said:
Which recovery you installed?
Click to expand...
Click to collapse
I used to have a twrp 3.0.0-0 recover then flash .165 recovery then flash .165 stock ROM. And after reboot, still cant get detect by any port. It just charged my phone. Then I updated to .174 but still no detection.
24imelqui said:
I used to have a twrp 3.0.0-0 recover then flash .165 recovery then flash .165 stock ROM. And after reboot, still cant get detect by any port. It just charged my phone. Then I updated to .174 but still no detection.
Click to expand...
Click to collapse
Try this.
http://forum.xda-developers.com/zenfone2/development/stock-rom-ul-z00a-ww-2-20-40-168-t3354526
mr_gourav2000 said:
Try this.
http://forum.xda-developers.com/zenfone2/development/stock-rom-ul-z00a-ww-2-20-40-168-t3354526
Click to expand...
Click to collapse
I have already returned to stock rom and recovery all is good, but my problem still exist. I cant get my phone to get detect by my PC or laptop. It just charged and it show usb device malfunction code 43. I got all drivers installed since I was able to root and flash custom roms before. Im asking if hard reseting thru stock recovery will fixed my problem and if you have any others ideas please share. Like how to root my device again without using pc/lwptop.
24imelqui said:
I have already returned to stock rom and recovery all is good, but my problem still exist. I cant get my phone to get detect by my PC or laptop. It just charged and it show usb device malfunction code 43. I got all drivers installed since I was able to root and flash custom roms before. Im asking if hard reseting thru stock recovery will fixed my problem and if you have any others ideas please share. Like how to root my device again without using pc/lwptop.
Click to expand...
Click to collapse
Try this may help you -
Switch off mobile
Plug in usb and connect to laptop or pc.
Now power on your mobile.
Look what happened?
mr_gourav2000 said:
Try this may help you -
Switch off mobile
Plug in usb and connect to laptop or pc.
Now power on your mobile.
Look what happened?
Click to expand...
Click to collapse
Still usb device malfunction code 43. Thanks man
I had the same issues when my Zenfone's chip set fried - PC did not recognise the phone, phone did not recognise USB drives, fast charging not working. To be precise what happened: one day I plugged in the cable (original one, with original charger), the phone showed high temperature warning and shut down. Then after a while I turned it back on but USB wasn't working any more, except for the slow charging. Sent in for a warranty repair, it was stuck there for like 2 months before they sent me a new phone.
Had the same problem, it turned out that my zenfone 2's charging port and microphone had been damaged. Replaced the parts from a third party repair man as my warranty was void. He returned me a very well functioning and no more problematic zennie within a week
It surely isn't a software problem..
Hope it helped..
Abhishek1108 said:
Had the same problem, it turned out that my zenfone 2's charging port and microphone had been damaged. Replaced the parts from a third party repair man as my warranty was void. He returned me a very well functioning and no more problematic zennie within a week
It surely isn't a software problem..
Hope it helped..
Click to expand...
Click to collapse
j4nitor said:
I had the same issues when my Zenfone's chip set fried - PC did not recognise the phone, phone did not recognise USB drives, fast charging not working. To be precise what happened: one day I plugged in the cable (original one, with original charger), the phone showed high temperature warning and shut down. Then after a while I turned it back on but USB wasn't working any more, except for the slow charging. Sent in for a warranty repair, it was stuck there for like 2 months before they sent me a new phone.
Click to expand...
Click to collapse
I have the same problem also. Can you tell me what part needed to be replaced? I already tried replacing the usb sub board but it did not work.
trinimike100 said:
I have the same problem also. Can you tell me what part needed to be replaced? I already tried replacing the usb sub board but it did not work.
Click to expand...
Click to collapse
I went to a 3rd party repairman and he said he just replaced the flex data cable or something like that, he also said it is common for zenfone smartphone. Then my phone is detectable again.
I'm having a weird issue with my Pixel 2 XL. I recently purchased Pixel 3 and used the adapter to transfer apps, etc from my Pixel 2 to the Pixel 3. It worked as intended.
However, after that happened, the Pixel 2 XL is not being recognized by my computer. I plug it in and it only charges and there's no notification to change usb mode. It also won't charge using the included charger that came with the phone.
My end goal is to unroot and relock bootloader so i can sell it but obviously I'm stuck. I've read it may be a USB 3.0 issue so I've ordered a 2.0 cable and it should be here in a couple days but looking for any suggestions. Below is what I've tried:
* Multiple computers and different cables
* USB debugging is on and default USB is set to file transfer.
* I've cleared media storage and external storage cache per Google product forums.
chill145 said:
I'm having a weird issue with my Pixel 2 XL. I recently purchased Pixel 3 and used the adapter to transfer apps, etc from my Pixel 2 to the Pixel 3. It worked as intended.
However, after that happened, the Pixel 2 XL is not being recognized by my computer. I plug it in and it only charges and there's no notification to change usb mode. It also won't charge using the included charger that came with the phone.
My end goal is to unroot and relock bootloader so i can sell it but obviously I'm stuck. I've read it may be a USB 3.0 issue so I've ordered a 2.0 cable and it should be here in a couple days but looking for any suggestions. Below is what I've tried:
* Multiple computers and different cables
* USB debugging is on and default USB is set to file transfer.
* I've cleared media storage and external storage cache per Google product forums.
Click to expand...
Click to collapse
Your likely right. Getting a 2.0 USB A to USB C cable is probably the solution. Many have had this issue. Including myself. There's even been times when a cable that did work, didn't work the next day. Then a week latter, it will. Go figure! :fingers-crossed:
Badger50 said:
Your likely right. Getting a 2.0 USB A to USB C cable is probably the solution. Many have had this issue. Including myself. There's even been times when a cable that did work, didn't work the next day. Then a week latter, it will. Go figure! :fingers-crossed:
Click to expand...
Click to collapse
I appreciate the response as it makes me feel a little bit better about the situation and if it's a cable issue, I'll make sure to update the post.
chill145 said:
I appreciate the response as it makes me feel a little bit better about the situation and if it's a cable issue, I'll make sure to update the post.
Click to expand...
Click to collapse
Also, check your device manager on your pc to make sure the driver is correct :good:
Badger50 said:
Also, check your device manager on your pc to make sure the driver is correct :good:
Click to expand...
Click to collapse
This. I had a similar issue and ended up uninstalling the drivers in device manager, then plugging the phone back in so the drivers could be downloaded again. Worked like a charm.
Badger50 said:
Also, check your device manager on your pc to make sure the driver is correct :good:
Click to expand...
Click to collapse
mbrian27 said:
This. I had a similar issue and ended up uninstalling the drivers in device manager, then plugging the phone back in so the drivers could be downloaded again. Worked like a charm.
Click to expand...
Click to collapse
So I got in the new USB 2.0 cable and computer still doesn't recognize the phone. I updated drivers and that didn't work either. I also uninstalled drivers but seeing as the computer isn't recognizing phone, it's not installing drivers when the phone is plugged back in.
The phone works except there's an update pending but it won't install, which I'm assuming it's do to the fact the bootloader is unlocked.
Is there anyway to install March security update using just twrp and downloading files to my phone and see if that'll work?
chill145 said:
So I got in the new USB 2.0 cable and computer still doesn't recognize the phone. I updated drivers and that didn't work either. I also uninstalled drivers but seeing as the computer isn't recognizing phone, it's not installing drivers when the phone is plugged back in.
The phone works except there's an update pending but it won't install, which I'm assuming it's do to the fact the bootloader is unlocked.
Is there anyway to install March security update using just twrp and downloading files to my phone and see if that'll work?
Click to expand...
Click to collapse
Bummer man! You've got a stubborn one, or a bad port. You can download the OTA from here....
https://developers.google.com/android/ota
Then flash it in twrp. However, remember to flash twrp again after the update is finished, then let the phone boot up, then go back to twrp and flash root and custom kernel if you use one :good:
Badger50 said:
Bummer man! You've got a stubborn one, or a bad port. You can download the OTA from here....
https://developers.google.com/android/ota
Then flash it in twrp. However, remember to flash twrp again after the update is finished, then let the phone boot up, then go back to twrp and flash root and custom kernel if you use one :good:
Click to expand...
Click to collapse
I really appreciate the response. Did that and it finally allowed me to connect. Got it all back to stock and my computer is finally recognizing the phone.
The original charger is now also working. Thank you again!
chill145 said:
I really appreciate the response. Did that and it finally allowed me to connect. Got it all back to stock and my computer is finally recognizing the phone.
The original charger is now also working. Thank you again!
Click to expand...
Click to collapse
Well hot damn! Excellent my friend. Glad it all worked out for you. These darn things have a mind of their own at times I think! :good: