Since yesterday my phone refuses to charge while booted into android (CM 10.1.2 Stable).
However it has absolutely no problems charging while turned off, in bootloader or hboot.
Also it will not be detected by PC usb so I can't flash a different ROM. What the hell is going on?
How do I get out of this mess?
Just to be clear I've already hard resetted the phone. It would appear that the usb drivers on the phone are to blame?
Need some help guys.
satwikpanda said:
Since yesterday my phone refuses to charge while booted into android (CM 10.1.2 Stable).
However it has absolutely no problems charging while turned off, in bootloader or hboot.
Also it will not be detected by PC usb so I can't flash a different ROM. What the hell is going on?
How do I get out of this mess?
Just to be clear I've already hard resetted the phone. It would appear that the usb drivers on the phone are to blame?
Need some help guys.
Click to expand...
Click to collapse
Install HTC drivers in your PC again.
virgolib said:
Install HTC drivers in your PC again.
Click to expand...
Click to collapse
Here's what I've tried so far:
Reinstalled HTC drivers
Installed a different recovery
Installed a different ROM with a stock kernel
VOodOO magic
Nothing has worked so far.
If I turn the phone off I can use adb to flash ROMS and such. However USB will not work when the device is on:
No charging or data transfer over USB. Otherwise phone appears to be working perfectly.
satwikpanda said:
Here's what I've tried so far:
Reinstalled HTC drivers
Installed a different recovery
Installed a different ROM with a stock kernel
VOodOO magic
Nothing has worked so far.
If I turn the phone off I can use adb to flash ROMS and such. However USB will not work when the device is on:
No charging or data transfer over USB. Otherwise phone appears to be working perfectly.
Click to expand...
Click to collapse
Hace you open USB debugging on?
virgolib said:
Hace you open USB debugging on?
Click to expand...
Click to collapse
Yes its on.
My digitizer has also been wonky lately. Wondering if the 2 issues are related.
satwikpanda said:
Yes its on.
My digitizer has also been wonky lately. Wondering if the 2 issues are related.
Click to expand...
Click to collapse
It's was happened to me with Sony Xperia Z, when usb debugging on all are working, but actually it's not a normal condition.
My pc is windows64bit and happening this problem so changed to win32 all are OK, So I think this may be driver conflict in PC.
Therefore if possible you try with another PC.
virgolib said:
It's was happened to me with Sony Xperia Z, when usb debugging on all are working, but actually it's not a normal condition.
My pc is windows64bit and happening this problem so changed to win32 all are OK, So I think this may be driver conflict in PC.
Therefore if possible you try with another PC.
Click to expand...
Click to collapse
Tried different cords and PCs.
Even wall chargers do not work.
Also comfirmed that a middle strip of around 10% of my screen area is dead to touch.
All signs indicate hardware damage. Might take it to HTC to get fixed now.
satwikpanda said:
Tried different cords and PCs.
Even wall chargers do not work.
Also comfirmed that a middle strip of around 10% of my screen area is dead to touch.
All signs indicate hardware damage. Might take it to HTC to get fixed now.
Click to expand...
Click to collapse
Yes it will be sure hardware failure, sorry.
Related
Hi,
Suddenly my device stopped working as a USB device. I really don't know what happened. It worked till last night and all of sudden this morning when I connected to my PC ( running windows 7) came up with the message - Device Drivers not Installed. I then installed Samsung drivers for Galaxy Nexus, which didn't solve my problem. I then tried with different other drivers from this forum. None of these drivers solved my problem.
I couldn't see my device in the Device Manager. What could be the problem ?
Most of the threads in this forum and in other web pages suggested to squeeze micro USB pin with a toothpick. I did finally do that and had no luck. Can someone suggest me the solution to it please?
Cheers..!!
Does your device charge when is connected via usb and your cellphone is on?
diegoveloper said:
Does your device charge when is connected via usb and your cellphone is on?
Click to expand...
Click to collapse
Diegoveloper,
Sometimes it does. But not as long as it is switched on. The moment I switched it off, it shows that battery charge symbol. I really don't understand the reasons for it. I suspect the driver issue. But I tried all possible drivers out there with hard luck.
P.S - It works every time I do hard reset. I just don't understand the reason. An OS update will fix this ?? I will try to recover from the stock image 4.2 through USB ( download to mobile through google drive )
Did you ever had this situation ? Please let me know of any solutions.
Cheers..!!
kalyan.kamepalli said:
Diegoveloper,
Sometimes it does. But not as long as it is switched on. The moment I switched it off, it shows that battery charge symbol. I really don't understand the reasons for it. I suspect the driver issue. But I tried all possible drivers out there with hard luck.
Did you ever had this situation ? Please let me know of any solutions.
Cheers..!!
Click to expand...
Click to collapse
Yes I was on this situation few days ago, I don't know the reason, I found this link http://code.google.com/p/android/issues/detail?id=23789&cnum=500&cstart=568
My problem was that I could not charge my device when it was on ,the uSB debugging was not working either.
I tried several methods but none works :/ , today I turn on my device, and It's working now, I can debug my apps , charge when the device is on, I don't know the reason for this , but you can check the link. :laugh:
diegoveloper said:
Yes I was on this situation few days ago, I don't know the reason, I found this link
My problem was that I could not charge my device when it was on ,the uSB debugging was not working either.
I tried several methods but none works :/ , today I turn on my device, and It's working now, I can debug my apps , charge when the device is on, I don't know the reason for this , but you can check the link. :laugh:
Click to expand...
Click to collapse
It's working now. It really is a weird problem. A couple of restarts work and then again it goes off. I will try to upgrade my OS to 4.2 and see if it solves the issue. I don't think it's a hardware problem. If it is a hardware problem, shouldn't work when it's powered off.
Had this problem but it was because I had "enable fast USB charge" on Franco... =\ forgot to switch it off when connected via PC.
-Google
I have tried several pc and cable, mtp is activated, driver installed.... The pc is not detecting the phone ( also in download mode), only charge it, lg have changed the usb board but no succes... Someone have an idea?
paplam said:
I have tried several pc and cable, mtp is activated, driver installed.... The pc is not detecting the phone ( also in download mode), only charge it, lg have changed the usb board but no succes... Someone have an idea?
Click to expand...
Click to collapse
Does it show up in the device manager when you connect it?
no
archie87 said:
Does it show up in the device manager when you connect it?
Click to expand...
Click to collapse
Please, i need help!
paplam said:
Please, i need help!
Click to expand...
Click to collapse
Which windows are you using? I use win xp and my pc can't detect the phone but on my win 8 laptop, it works.
tried xp, seven 32 and 64, osx...
its a problem with the phone, not a pc problem...
galeonui9590 said:
Which windows are you using? I use win xp and my pc can't detect the phone but on my win 8 laptop, it works.
Click to expand...
Click to collapse
i assume you are still able to charge your phone? do you have a custom rom installed? reinstall latest proper drivers. i would try a factory reset or a hard reset. if that does not work it may be a hardware issue.
http://www.lg.com/ca_en/support-mobile/lg-LGE973#pcsync
have tried lot of rom, the phone charge, proper driver reinstalled, how to do a hard reset?
gentledroid17 said:
i assume you are still able to charge your phone? do you have a custom rom installed? reinstall latest proper drivers. i would try a factory reset or a hard reset. if that does not work it may be a hardware issue.
http://www.lg.com/ca_en/support-mobile/lg-LGE973#pcsync
Click to expand...
Click to collapse
paplam said:
have tried lot of rom, the phone charge, proper driver reinstalled, how to do a hard reset?
Click to expand...
Click to collapse
Turn phone completely off. Hold down power and volume down. Follow onscreen instructions.
Sent from my LG-E973 using xda app-developers app
i have do the hard reset with no sucess, phone wont connect to pc...:crying:
gentledroid17 said:
Turn phone completely off. Hold down power and volume down. Follow onscreen instructions.
Sent from my LG-E973 using xda app-developers app
Click to expand...
Click to collapse
any way to convert a stock kdz to a .bin file, maybe it can resolve my problem?
Nope,no way.
If you have a wireless network home,you can always use airdroid to transfer files to/from phone.
Sent from LG E975 pwd by CarbonRom
I had this issue, had to RMA it.
Most likely, the device is still covered by manufacturer's waranty, use it!
Have done this and they changed the usb port on the phone but that didnt solve the problem, after, the guy at the cellstore said me that because i have changed the rom they cannot send it again to lg...
t1mman said:
I had this issue, had to RMA it.
Most likely, the device is still covered by manufacturer's waranty, use it!
Click to expand...
Click to collapse
paplam said:
Have done this and they changed the usb port on the phone but that didnt solve the problem, after, the guy at the cellstore said me that because i have changed the rom they cannot send it again to lg...
Click to expand...
Click to collapse
Indeed, unless you can go back to stock... Which is kinda hard without USB :|
Anyway to return stock without usb?
do you have 32 or 64bit Windows?
tried another usb port and maybe another cable if you ain't using the stock LG OEM USB cable.
if it don't wanna get detected on your pc try a friends pc or laptop see if that work.
32 & 64, osx , ubuntu all tried with different pc and cable.
puma99dk| said:
do you have 32 or 64bit Windows?
tried another usb port and maybe another cable if you ain't using the stock LG OEM USB cable.
if it don't wanna get detected on your pc try a friends pc or laptop see if that work.
Click to expand...
Click to collapse
paplam said:
32 & 64, osx , ubuntu all tried with different pc and cable.
Click to expand...
Click to collapse
that sounds weird then because last time i had this problem it was the cable i used on my own pc it didn't work here, but it did on my dad's laptop.
it was when i found out that the original lg oem usb cable couldn't charge my phone anymore, but data works fine.
I went to a cellphone reparation shop, they tested it and tell me that it must be an hardware or firmware issus with the phone...
..
puma99dk| said:
that sounds weird then because last time i had this problem it was the cable i used on my own pc it didn't work here, but it did on my dad's laptop.
it was when i found out that the original lg oem usb cable couldn't charge my phone anymore, but data works fine.
Click to expand...
Click to collapse
I recently updated the firmware on my M7 thru santo040 [ROM]|Radio|Firmware post. I was on 4.10.605.3 and upgraded to 5.28.605.2 , I also updated the radio as well.I am currently on BONESTOCK v4.3. I did this process at work and everything worked. As I got home and plugged my phone in the wall charger I noticed a slow charge notification. I selected don't show this again and hit ok. As i got to work the next morning i wanted to change to the dark boot screen. But when I plugged the phone into the PC this time I get a windows error stating that this usb device malfunctioned. So I thought it was the driver so I reinstalled the driver and get the same error. I even plugged it into my home PC and get the same error. Has anyone experienced this issue? Your help would be greatly appreciated.
ANYONE
jcharles1 said:
ANYONE
Click to expand...
Click to collapse
Have you tried a different usb cable?
We're you on that Rom when you updated the firmware?
I tried several cables and different PCs. ROM is Bonestock v4.3
Also constantly getting slow charge notification when I plug it in the wall charger at home. Original charger
Have you tried to see if PC recognizes the device in bootloader or recovery to rule out the ROM somehow being the culprit?
jcharles1 said:
I tried several cables and different PCs. ROM is Bonestock v4.3
Click to expand...
Click to collapse
I'll ask again:
We're you on that Rom when you updated the firmware?
Click to expand...
Click to collapse
I was on the Bonestock Rom
Uzephi said:
Have you tried to see if PC recognizes the device in bootloader or recovery to rule out the ROM somehow being the culprit?
Click to expand...
Click to collapse
PC doesn't recognize it. Before the update it did tho
jcharles1 said:
I was on the Bonestock Rom
Click to expand...
Click to collapse
That slow charge notification is generally only seen when using a non oem cable.
Best I can suggest at this point, is trying a different cable and a different usb port.
I know you said you tried from two different computers and several cables, but something isn't right, or the pc should recognize the device properly.
I am on the latest firmware and so are many others and I've had no issues using adb, fastboot, or file transfer and haven't seen any other reports of such.
Not sure what has or has not been done to the boot.img in that rom, but it could be that it does not have adb enabled or you do not have usb debugging enabled in Dev settings?
Not really sure what else to suggest at this point.
Sounds to me like a bad cable though, especially if you are getting the low charge notification from it, it likely won't transfer data.
santod040 said:
I'll ask again:
Click to expand...
Click to collapse
No. was running Bonestock
santod040 said:
That slow charge notification is generally only seen when using a non oem cable.
Best I can suggest at this point, is trying a different cable and a different usb port.
I know you said you tried from two different computers and several cables, but something isn't right, or the pc should recognize the device properly.
I am on the latest firmware and so are many others and I've had no issues using adb, fastboot, or file transfer and haven't seen any other reports of such.
Not sure what has or has not been done to the boot.img in that rom, but it could be that it does not have adb enabled or you do not have usb debugging enabled in Dev settings?
Not really sure what else to suggest at this point.
Sounds to me like a bad cable though, especially if you are getting the low charge notification from it, it likely won't transfer data.
Click to expand...
Click to collapse
I unchecked and check usb debugging several times. The cable I'm using are different. I have one for my desk at work and for home.
Is there another way to enable adb. Everything was working fine before the updated of the firmware. I even tried to restore a backup to an earlier date. no avail
I need help, my ZF2 suddenly cannot be detected by my windows 7 laptop and pc. When I tried to plug in usb 3 port, it wont get detected. If in usb 2/1 port, it will be detected but with the yellow exclamation mark. I tried updating mtp but it wont update (shows device is up to date). I tried reinstalling ROM and factory reset thru the ROM, but still not working.
I returned to stock but still it wont get detected on my pc or laptop. I ****ed everthing up when I returned to stock since I cant root it back anymore since it wont get detected by adb.
Evereything is up to date including 15sec adb installer 1.4.2 or 1.4.3 and intel usb driver 1.10 from 1.9.
I will try to reformat thru stock recovery and see if it will work. But before doing that, any suggestion or ideas?
Does it charge while connected to the laptop?
Have you tried using other micro USB cables?
FrameCall said:
Does it charge while connected to the laptop?
Have you tried using other micro USB cables?
Click to expand...
Click to collapse
Yes, it charged when I plugged it on different port. And yes, I have tried different cables, samsung, asus and dont know brand chords. All cables only shows usb device malfunction code 43 and all charged my phone when plugged to ports.
Anybody? Suggestions? Ideas?
Anyone?
Can you check and see if fast charging works?
24imelqui said:
Anyone?
Click to expand...
Click to collapse
Which recovery you installed?
trinimike100 said:
Can you check and see if fast charging works?
Click to expand...
Click to collapse
Fast charging dont work anymore. It will take atleast 2 hrs to charge the phone.
mr_gourav2000 said:
Which recovery you installed?
Click to expand...
Click to collapse
I used to have a twrp 3.0.0-0 recover then flash .165 recovery then flash .165 stock ROM. And after reboot, still cant get detect by any port. It just charged my phone. Then I updated to .174 but still no detection.
24imelqui said:
I used to have a twrp 3.0.0-0 recover then flash .165 recovery then flash .165 stock ROM. And after reboot, still cant get detect by any port. It just charged my phone. Then I updated to .174 but still no detection.
Click to expand...
Click to collapse
Try this.
http://forum.xda-developers.com/zenfone2/development/stock-rom-ul-z00a-ww-2-20-40-168-t3354526
mr_gourav2000 said:
Try this.
http://forum.xda-developers.com/zenfone2/development/stock-rom-ul-z00a-ww-2-20-40-168-t3354526
Click to expand...
Click to collapse
I have already returned to stock rom and recovery all is good, but my problem still exist. I cant get my phone to get detect by my PC or laptop. It just charged and it show usb device malfunction code 43. I got all drivers installed since I was able to root and flash custom roms before. Im asking if hard reseting thru stock recovery will fixed my problem and if you have any others ideas please share. Like how to root my device again without using pc/lwptop.
24imelqui said:
I have already returned to stock rom and recovery all is good, but my problem still exist. I cant get my phone to get detect by my PC or laptop. It just charged and it show usb device malfunction code 43. I got all drivers installed since I was able to root and flash custom roms before. Im asking if hard reseting thru stock recovery will fixed my problem and if you have any others ideas please share. Like how to root my device again without using pc/lwptop.
Click to expand...
Click to collapse
Try this may help you -
Switch off mobile
Plug in usb and connect to laptop or pc.
Now power on your mobile.
Look what happened?
mr_gourav2000 said:
Try this may help you -
Switch off mobile
Plug in usb and connect to laptop or pc.
Now power on your mobile.
Look what happened?
Click to expand...
Click to collapse
Still usb device malfunction code 43. Thanks man
I had the same issues when my Zenfone's chip set fried - PC did not recognise the phone, phone did not recognise USB drives, fast charging not working. To be precise what happened: one day I plugged in the cable (original one, with original charger), the phone showed high temperature warning and shut down. Then after a while I turned it back on but USB wasn't working any more, except for the slow charging. Sent in for a warranty repair, it was stuck there for like 2 months before they sent me a new phone.
Had the same problem, it turned out that my zenfone 2's charging port and microphone had been damaged. Replaced the parts from a third party repair man as my warranty was void. He returned me a very well functioning and no more problematic zennie within a week
It surely isn't a software problem..
Hope it helped..
Abhishek1108 said:
Had the same problem, it turned out that my zenfone 2's charging port and microphone had been damaged. Replaced the parts from a third party repair man as my warranty was void. He returned me a very well functioning and no more problematic zennie within a week
It surely isn't a software problem..
Hope it helped..
Click to expand...
Click to collapse
j4nitor said:
I had the same issues when my Zenfone's chip set fried - PC did not recognise the phone, phone did not recognise USB drives, fast charging not working. To be precise what happened: one day I plugged in the cable (original one, with original charger), the phone showed high temperature warning and shut down. Then after a while I turned it back on but USB wasn't working any more, except for the slow charging. Sent in for a warranty repair, it was stuck there for like 2 months before they sent me a new phone.
Click to expand...
Click to collapse
I have the same problem also. Can you tell me what part needed to be replaced? I already tried replacing the usb sub board but it did not work.
trinimike100 said:
I have the same problem also. Can you tell me what part needed to be replaced? I already tried replacing the usb sub board but it did not work.
Click to expand...
Click to collapse
I went to a 3rd party repairman and he said he just replaced the flex data cable or something like that, he also said it is common for zenfone smartphone. Then my phone is detectable again.
Hello friends,
I own a OP3 fr over a year now and had no issues with it while rooting and changing roms, etc till two weeks ago.
After updating my ROM (Experience rom) to its latest version my phone could not mount to the PC, OTG is not working and dash charge went to hell.
Now, The phone has never been close to water at all, I've been careful with it more than with myself.
The phone has been checked by a repair man, he changed the usb port+mic 3 times, still not working.
Ofc I checked another charger, another cable, drivers, another otg usb.... NOTHING seems to get it to mount.
TWRP is working alright but I cannot mount from there also. OTG as well.
The phone shows on some PC's that it is an unknown device, even with drivers installed, won't let me set it as a mass storage or anything I can think of.
Does anyone have an idea to what the hell is going on?
Thank you in advance.
Muskito87 said:
Hello friends,
I own a OP3 fr over a year now and had no issues with it while rooting and changing roms, etc till two weeks ago.
After updating my ROM (Experience rom) to its latest version my phone could not mount to the PC, OTG is not working and dash charge went to hell.
Now, The phone has never been close to water at all, I've been careful with it more than with myself.
The phone has been checked by a repair man, he changed the usb port+mic 3 times, still not working.
Ofc I checked another charger, another cable, drivers, another otg usb.... NOTHING seems to get it to mount.
TWRP is working alright but I cannot mount from there also. OTG as well.
The phone shows on some PC's that it is an unknown device, even with drivers installed, won't let me set it as a mass storage or anything I can think of.
Does anyone have an idea to what the hell is going on?
Thank you in advance.
Click to expand...
Click to collapse
What does the logcat say?
zelendel said:
What does the logcat say?
Click to expand...
Click to collapse
I can't do a logcat. There is no OS currently.
I can only enter TWRP or Fastboot.
Cannot mount from TWRP, Cannot get ADB sideload to work.
The device is an unrecognized driver in the device manager. (tried uninstalling ALL related drivers and installing again.)
Only weird thing i found is that the baseband and modem versions are missing from showing in fastboot
Exact same problem here
Im using the open beta 12, no OTG no dash charging :crying:
ahmadsensei said:
Exact same problem here
Im using the open beta 12, no OTG no dash charging :crying:
Click to expand...
Click to collapse
can u check something, if you go in fastboot do you get your baseband and modem versions?
I dont know how to access fastboot
But here is a screen shot
https://
goo.gl/photos/
owUkTtK6F5933ayz7
Muskito87 said:
can u check something, if you go in fastboot do you get your baseband and modem versions?
Click to expand...
Click to collapse
If you are talking about bootloader mode, right from the day I purchased the phone, they are blank despite flashing different ROMs and firmware/modems. So that is not an issue.