Hello friends,
I own a OP3 fr over a year now and had no issues with it while rooting and changing roms, etc till two weeks ago.
After updating my ROM (Experience rom) to its latest version my phone could not mount to the PC, OTG is not working and dash charge went to hell.
Now, The phone has never been close to water at all, I've been careful with it more than with myself.
The phone has been checked by a repair man, he changed the usb port+mic 3 times, still not working.
Ofc I checked another charger, another cable, drivers, another otg usb.... NOTHING seems to get it to mount.
TWRP is working alright but I cannot mount from there also. OTG as well.
The phone shows on some PC's that it is an unknown device, even with drivers installed, won't let me set it as a mass storage or anything I can think of.
Does anyone have an idea to what the hell is going on?
Thank you in advance.
Muskito87 said:
Hello friends,
I own a OP3 fr over a year now and had no issues with it while rooting and changing roms, etc till two weeks ago.
After updating my ROM (Experience rom) to its latest version my phone could not mount to the PC, OTG is not working and dash charge went to hell.
Now, The phone has never been close to water at all, I've been careful with it more than with myself.
The phone has been checked by a repair man, he changed the usb port+mic 3 times, still not working.
Ofc I checked another charger, another cable, drivers, another otg usb.... NOTHING seems to get it to mount.
TWRP is working alright but I cannot mount from there also. OTG as well.
The phone shows on some PC's that it is an unknown device, even with drivers installed, won't let me set it as a mass storage or anything I can think of.
Does anyone have an idea to what the hell is going on?
Thank you in advance.
Click to expand...
Click to collapse
What does the logcat say?
zelendel said:
What does the logcat say?
Click to expand...
Click to collapse
I can't do a logcat. There is no OS currently.
I can only enter TWRP or Fastboot.
Cannot mount from TWRP, Cannot get ADB sideload to work.
The device is an unrecognized driver in the device manager. (tried uninstalling ALL related drivers and installing again.)
Only weird thing i found is that the baseband and modem versions are missing from showing in fastboot
Exact same problem here
Im using the open beta 12, no OTG no dash charging :crying:
ahmadsensei said:
Exact same problem here
Im using the open beta 12, no OTG no dash charging :crying:
Click to expand...
Click to collapse
can u check something, if you go in fastboot do you get your baseband and modem versions?
I dont know how to access fastboot
But here is a screen shot
https://
goo.gl/photos/
owUkTtK6F5933ayz7
Muskito87 said:
can u check something, if you go in fastboot do you get your baseband and modem versions?
Click to expand...
Click to collapse
If you are talking about bootloader mode, right from the day I purchased the phone, they are blank despite flashing different ROMs and firmware/modems. So that is not an issue.
Related
Since yesterday my phone refuses to charge while booted into android (CM 10.1.2 Stable).
However it has absolutely no problems charging while turned off, in bootloader or hboot.
Also it will not be detected by PC usb so I can't flash a different ROM. What the hell is going on?
How do I get out of this mess?
Just to be clear I've already hard resetted the phone. It would appear that the usb drivers on the phone are to blame?
Need some help guys.
satwikpanda said:
Since yesterday my phone refuses to charge while booted into android (CM 10.1.2 Stable).
However it has absolutely no problems charging while turned off, in bootloader or hboot.
Also it will not be detected by PC usb so I can't flash a different ROM. What the hell is going on?
How do I get out of this mess?
Just to be clear I've already hard resetted the phone. It would appear that the usb drivers on the phone are to blame?
Need some help guys.
Click to expand...
Click to collapse
Install HTC drivers in your PC again.
virgolib said:
Install HTC drivers in your PC again.
Click to expand...
Click to collapse
Here's what I've tried so far:
Reinstalled HTC drivers
Installed a different recovery
Installed a different ROM with a stock kernel
VOodOO magic
Nothing has worked so far.
If I turn the phone off I can use adb to flash ROMS and such. However USB will not work when the device is on:
No charging or data transfer over USB. Otherwise phone appears to be working perfectly.
satwikpanda said:
Here's what I've tried so far:
Reinstalled HTC drivers
Installed a different recovery
Installed a different ROM with a stock kernel
VOodOO magic
Nothing has worked so far.
If I turn the phone off I can use adb to flash ROMS and such. However USB will not work when the device is on:
No charging or data transfer over USB. Otherwise phone appears to be working perfectly.
Click to expand...
Click to collapse
Hace you open USB debugging on?
virgolib said:
Hace you open USB debugging on?
Click to expand...
Click to collapse
Yes its on.
My digitizer has also been wonky lately. Wondering if the 2 issues are related.
satwikpanda said:
Yes its on.
My digitizer has also been wonky lately. Wondering if the 2 issues are related.
Click to expand...
Click to collapse
It's was happened to me with Sony Xperia Z, when usb debugging on all are working, but actually it's not a normal condition.
My pc is windows64bit and happening this problem so changed to win32 all are OK, So I think this may be driver conflict in PC.
Therefore if possible you try with another PC.
virgolib said:
It's was happened to me with Sony Xperia Z, when usb debugging on all are working, but actually it's not a normal condition.
My pc is windows64bit and happening this problem so changed to win32 all are OK, So I think this may be driver conflict in PC.
Therefore if possible you try with another PC.
Click to expand...
Click to collapse
Tried different cords and PCs.
Even wall chargers do not work.
Also comfirmed that a middle strip of around 10% of my screen area is dead to touch.
All signs indicate hardware damage. Might take it to HTC to get fixed now.
satwikpanda said:
Tried different cords and PCs.
Even wall chargers do not work.
Also comfirmed that a middle strip of around 10% of my screen area is dead to touch.
All signs indicate hardware damage. Might take it to HTC to get fixed now.
Click to expand...
Click to collapse
Yes it will be sure hardware failure, sorry.
Here is my problem where I can't get my Sprint S3 connected to PC, I am half rooted, and have no custom recovery, I can't flash anything on my phone except OTAs, please help, any help is much much appreciated.
Background :
I had this phone working completely fine, I bought aftermarket USB cable and attached it to the PC, everything went smooth it got connected fine in MTP mode, on second day when I tried to connect it, it gave me error that USB Device Not Recognized.
Problem :
The phone is not getting connected to PC in any way, whether it is MTP, DM+Modem, PTP, ADB, etc... not even in download mode to flash it via Odin. No matter on which mode I am it always give me error that USB Device Not Recognized.
It sense when I change modes while it is connected to PC, like when I am on MTP and I click DM+Modem or I click USB Debugging, it displays that USB Device Not Recognized message again, so I it is sensing mode changes.
What I did so far :
Changed cable and used brand new Samsung Original cable, changed USB ports, changed 4-5 computers, installed and re-installed drivers numerous times, my friend who does the phone repairs changed Micro USB Slot on the phone 4 times with Original ones, he even took one from working phone and put in on this phone, no luck so far.
My inputs :
I've searched really a lot about this problem, but didn't find any single solution.
Some guys on forums reported that they solved problem by flashing a stock or custom rom as there might be a problem with Kernel.
I can't flash anything on my device since I am on stock recovery and half rooted, I had LJ7 rooted stock on my device, and I took MD4 OTA, now, my phone is half rooted, when I install any application which requires root, I get message that 'Superuser permission denied'.
I can't even uninstall Superuser, because it is system app, I tried to re-root phone via Motochopper method but it doesn't work.
I flashed this phone to different carrier, so, I am afraid I will loose my flash if I take latest 4.3 OTA.
PLEASE HELP IF YOU HAVE ANY SOLUTION FOR THIS PROBLEM, I WANT MY PHONE TO GET CONNECTED TO PC ANYHOW.
I AM READY TO DO ANYTHING YOU SUGGEST TO RECOVER MY PHONE.
keval32 said:
Here is my problem where I can't get my Sprint S3 connected to PC, I am half rooted, and have no custom recovery, I can't flash anything on my phone except OTAs, please help, any help is much much appreciated.
Background :
I had this phone working completely fine, I bought aftermarket USB cable and attached it to the PC, everything went smooth it got connected fine in MTP mode, on second day when I tried to connect it, it gave me error that USB Device Not Recognized.
Problem :
The phone is not getting connected to PC in any way, whether it is MTP, DM+Modem, PTP, ADB, etc... not even in download mode to flash it via Odin. No matter on which mode I am it always give me error that USB Device Not Recognized.
It sense when I change modes while it is connected to PC, like when I am on MTP and I click DM+Modem or I click USB Debugging, it displays that USB Not Recognized message again, so I guess it is sensing mode changes.
What I did so far :
Changed cable and used brand new Samsung Original cable, changed USB ports, changed 4-5 computers, installed and re-installed drivers numerous times, my friend who does the phone repairs changed Micro USB Slot on the phone 4 times with Original ones, he even took one from working phone and put in on this phone, no luck so far.
My inputs :
I've searched really a lot about this problem, but didn't find any single solution.
Some guys on forums reported that they solved problem by flashing a stock or custom rom and as there might be a problem with Kernel.
I can't flash anything on my device since I am on stock recovery and half rooted, I had LJ7 rooted stock on my device, and I took MD4 OTA, now, my phone is half rooted, when I install any application which requires root, I get message that 'Superuser permission denied'.
I can't even uninstall Superuser, because it is system app, I tried to re-root phone via Motochopper method but it doesn't work.
I flashed this phone to different carrier, so, I am afraid I will loose it if I take latest 4.3 OTA.
PLEASE HELP IF YOU HAVE ANY SOLUTION FOR THIS PROBLEM, I WANT MY PHONE TO GET CONNECTED TO PC ANYHOW.
I AM READY TO DO ANYTHING YOU SUGGEST TO RECOVER MY PHONE.
Click to expand...
Click to collapse
Did you uninstall drivers from Windows device manager before reinstalling drivers? I found that this sometimes helps.
joeyhdownsouth said:
Did you uninstall drivers from Windows device manager before reinstalling drivers? I found that this sometimes helps.
Click to expand...
Click to collapse
Yes my friend, I did that.
keval32 said:
Yes my friend, I did that.
Click to expand...
Click to collapse
Is Kies installed on computer? Which version of Windows?
joeyhdownsouth said:
Is Kies installed on computer? Which version of Windows?
Click to expand...
Click to collapse
No, Kies was not installed on my computer when this problem occurred, but I checked installing Kies but no luck so far, and I am on Windows Ultimate x64.
I recently updated the firmware on my M7 thru santo040 [ROM]|Radio|Firmware post. I was on 4.10.605.3 and upgraded to 5.28.605.2 , I also updated the radio as well.I am currently on BONESTOCK v4.3. I did this process at work and everything worked. As I got home and plugged my phone in the wall charger I noticed a slow charge notification. I selected don't show this again and hit ok. As i got to work the next morning i wanted to change to the dark boot screen. But when I plugged the phone into the PC this time I get a windows error stating that this usb device malfunctioned. So I thought it was the driver so I reinstalled the driver and get the same error. I even plugged it into my home PC and get the same error. Has anyone experienced this issue? Your help would be greatly appreciated.
ANYONE
jcharles1 said:
ANYONE
Click to expand...
Click to collapse
Have you tried a different usb cable?
We're you on that Rom when you updated the firmware?
I tried several cables and different PCs. ROM is Bonestock v4.3
Also constantly getting slow charge notification when I plug it in the wall charger at home. Original charger
Have you tried to see if PC recognizes the device in bootloader or recovery to rule out the ROM somehow being the culprit?
jcharles1 said:
I tried several cables and different PCs. ROM is Bonestock v4.3
Click to expand...
Click to collapse
I'll ask again:
We're you on that Rom when you updated the firmware?
Click to expand...
Click to collapse
I was on the Bonestock Rom
Uzephi said:
Have you tried to see if PC recognizes the device in bootloader or recovery to rule out the ROM somehow being the culprit?
Click to expand...
Click to collapse
PC doesn't recognize it. Before the update it did tho
jcharles1 said:
I was on the Bonestock Rom
Click to expand...
Click to collapse
That slow charge notification is generally only seen when using a non oem cable.
Best I can suggest at this point, is trying a different cable and a different usb port.
I know you said you tried from two different computers and several cables, but something isn't right, or the pc should recognize the device properly.
I am on the latest firmware and so are many others and I've had no issues using adb, fastboot, or file transfer and haven't seen any other reports of such.
Not sure what has or has not been done to the boot.img in that rom, but it could be that it does not have adb enabled or you do not have usb debugging enabled in Dev settings?
Not really sure what else to suggest at this point.
Sounds to me like a bad cable though, especially if you are getting the low charge notification from it, it likely won't transfer data.
santod040 said:
I'll ask again:
Click to expand...
Click to collapse
No. was running Bonestock
santod040 said:
That slow charge notification is generally only seen when using a non oem cable.
Best I can suggest at this point, is trying a different cable and a different usb port.
I know you said you tried from two different computers and several cables, but something isn't right, or the pc should recognize the device properly.
I am on the latest firmware and so are many others and I've had no issues using adb, fastboot, or file transfer and haven't seen any other reports of such.
Not sure what has or has not been done to the boot.img in that rom, but it could be that it does not have adb enabled or you do not have usb debugging enabled in Dev settings?
Not really sure what else to suggest at this point.
Sounds to me like a bad cable though, especially if you are getting the low charge notification from it, it likely won't transfer data.
Click to expand...
Click to collapse
I unchecked and check usb debugging several times. The cable I'm using are different. I have one for my desk at work and for home.
Is there another way to enable adb. Everything was working fine before the updated of the firmware. I even tried to restore a backup to an earlier date. no avail
I need help, my ZF2 suddenly cannot be detected by my windows 7 laptop and pc. When I tried to plug in usb 3 port, it wont get detected. If in usb 2/1 port, it will be detected but with the yellow exclamation mark. I tried updating mtp but it wont update (shows device is up to date). I tried reinstalling ROM and factory reset thru the ROM, but still not working.
I returned to stock but still it wont get detected on my pc or laptop. I ****ed everthing up when I returned to stock since I cant root it back anymore since it wont get detected by adb.
Evereything is up to date including 15sec adb installer 1.4.2 or 1.4.3 and intel usb driver 1.10 from 1.9.
I will try to reformat thru stock recovery and see if it will work. But before doing that, any suggestion or ideas?
Does it charge while connected to the laptop?
Have you tried using other micro USB cables?
FrameCall said:
Does it charge while connected to the laptop?
Have you tried using other micro USB cables?
Click to expand...
Click to collapse
Yes, it charged when I plugged it on different port. And yes, I have tried different cables, samsung, asus and dont know brand chords. All cables only shows usb device malfunction code 43 and all charged my phone when plugged to ports.
Anybody? Suggestions? Ideas?
Anyone?
Can you check and see if fast charging works?
24imelqui said:
Anyone?
Click to expand...
Click to collapse
Which recovery you installed?
trinimike100 said:
Can you check and see if fast charging works?
Click to expand...
Click to collapse
Fast charging dont work anymore. It will take atleast 2 hrs to charge the phone.
mr_gourav2000 said:
Which recovery you installed?
Click to expand...
Click to collapse
I used to have a twrp 3.0.0-0 recover then flash .165 recovery then flash .165 stock ROM. And after reboot, still cant get detect by any port. It just charged my phone. Then I updated to .174 but still no detection.
24imelqui said:
I used to have a twrp 3.0.0-0 recover then flash .165 recovery then flash .165 stock ROM. And after reboot, still cant get detect by any port. It just charged my phone. Then I updated to .174 but still no detection.
Click to expand...
Click to collapse
Try this.
http://forum.xda-developers.com/zenfone2/development/stock-rom-ul-z00a-ww-2-20-40-168-t3354526
mr_gourav2000 said:
Try this.
http://forum.xda-developers.com/zenfone2/development/stock-rom-ul-z00a-ww-2-20-40-168-t3354526
Click to expand...
Click to collapse
I have already returned to stock rom and recovery all is good, but my problem still exist. I cant get my phone to get detect by my PC or laptop. It just charged and it show usb device malfunction code 43. I got all drivers installed since I was able to root and flash custom roms before. Im asking if hard reseting thru stock recovery will fixed my problem and if you have any others ideas please share. Like how to root my device again without using pc/lwptop.
24imelqui said:
I have already returned to stock rom and recovery all is good, but my problem still exist. I cant get my phone to get detect by my PC or laptop. It just charged and it show usb device malfunction code 43. I got all drivers installed since I was able to root and flash custom roms before. Im asking if hard reseting thru stock recovery will fixed my problem and if you have any others ideas please share. Like how to root my device again without using pc/lwptop.
Click to expand...
Click to collapse
Try this may help you -
Switch off mobile
Plug in usb and connect to laptop or pc.
Now power on your mobile.
Look what happened?
mr_gourav2000 said:
Try this may help you -
Switch off mobile
Plug in usb and connect to laptop or pc.
Now power on your mobile.
Look what happened?
Click to expand...
Click to collapse
Still usb device malfunction code 43. Thanks man
I had the same issues when my Zenfone's chip set fried - PC did not recognise the phone, phone did not recognise USB drives, fast charging not working. To be precise what happened: one day I plugged in the cable (original one, with original charger), the phone showed high temperature warning and shut down. Then after a while I turned it back on but USB wasn't working any more, except for the slow charging. Sent in for a warranty repair, it was stuck there for like 2 months before they sent me a new phone.
Had the same problem, it turned out that my zenfone 2's charging port and microphone had been damaged. Replaced the parts from a third party repair man as my warranty was void. He returned me a very well functioning and no more problematic zennie within a week
It surely isn't a software problem..
Hope it helped..
Abhishek1108 said:
Had the same problem, it turned out that my zenfone 2's charging port and microphone had been damaged. Replaced the parts from a third party repair man as my warranty was void. He returned me a very well functioning and no more problematic zennie within a week
It surely isn't a software problem..
Hope it helped..
Click to expand...
Click to collapse
j4nitor said:
I had the same issues when my Zenfone's chip set fried - PC did not recognise the phone, phone did not recognise USB drives, fast charging not working. To be precise what happened: one day I plugged in the cable (original one, with original charger), the phone showed high temperature warning and shut down. Then after a while I turned it back on but USB wasn't working any more, except for the slow charging. Sent in for a warranty repair, it was stuck there for like 2 months before they sent me a new phone.
Click to expand...
Click to collapse
I have the same problem also. Can you tell me what part needed to be replaced? I already tried replacing the usb sub board but it did not work.
trinimike100 said:
I have the same problem also. Can you tell me what part needed to be replaced? I already tried replacing the usb sub board but it did not work.
Click to expand...
Click to collapse
I went to a 3rd party repairman and he said he just replaced the flex data cable or something like that, he also said it is common for zenfone smartphone. Then my phone is detectable again.
I'm having a weird issue with my Pixel 2 XL. I recently purchased Pixel 3 and used the adapter to transfer apps, etc from my Pixel 2 to the Pixel 3. It worked as intended.
However, after that happened, the Pixel 2 XL is not being recognized by my computer. I plug it in and it only charges and there's no notification to change usb mode. It also won't charge using the included charger that came with the phone.
My end goal is to unroot and relock bootloader so i can sell it but obviously I'm stuck. I've read it may be a USB 3.0 issue so I've ordered a 2.0 cable and it should be here in a couple days but looking for any suggestions. Below is what I've tried:
* Multiple computers and different cables
* USB debugging is on and default USB is set to file transfer.
* I've cleared media storage and external storage cache per Google product forums.
chill145 said:
I'm having a weird issue with my Pixel 2 XL. I recently purchased Pixel 3 and used the adapter to transfer apps, etc from my Pixel 2 to the Pixel 3. It worked as intended.
However, after that happened, the Pixel 2 XL is not being recognized by my computer. I plug it in and it only charges and there's no notification to change usb mode. It also won't charge using the included charger that came with the phone.
My end goal is to unroot and relock bootloader so i can sell it but obviously I'm stuck. I've read it may be a USB 3.0 issue so I've ordered a 2.0 cable and it should be here in a couple days but looking for any suggestions. Below is what I've tried:
* Multiple computers and different cables
* USB debugging is on and default USB is set to file transfer.
* I've cleared media storage and external storage cache per Google product forums.
Click to expand...
Click to collapse
Your likely right. Getting a 2.0 USB A to USB C cable is probably the solution. Many have had this issue. Including myself. There's even been times when a cable that did work, didn't work the next day. Then a week latter, it will. Go figure! :fingers-crossed:
Badger50 said:
Your likely right. Getting a 2.0 USB A to USB C cable is probably the solution. Many have had this issue. Including myself. There's even been times when a cable that did work, didn't work the next day. Then a week latter, it will. Go figure! :fingers-crossed:
Click to expand...
Click to collapse
I appreciate the response as it makes me feel a little bit better about the situation and if it's a cable issue, I'll make sure to update the post.
chill145 said:
I appreciate the response as it makes me feel a little bit better about the situation and if it's a cable issue, I'll make sure to update the post.
Click to expand...
Click to collapse
Also, check your device manager on your pc to make sure the driver is correct :good:
Badger50 said:
Also, check your device manager on your pc to make sure the driver is correct :good:
Click to expand...
Click to collapse
This. I had a similar issue and ended up uninstalling the drivers in device manager, then plugging the phone back in so the drivers could be downloaded again. Worked like a charm.
Badger50 said:
Also, check your device manager on your pc to make sure the driver is correct :good:
Click to expand...
Click to collapse
mbrian27 said:
This. I had a similar issue and ended up uninstalling the drivers in device manager, then plugging the phone back in so the drivers could be downloaded again. Worked like a charm.
Click to expand...
Click to collapse
So I got in the new USB 2.0 cable and computer still doesn't recognize the phone. I updated drivers and that didn't work either. I also uninstalled drivers but seeing as the computer isn't recognizing phone, it's not installing drivers when the phone is plugged back in.
The phone works except there's an update pending but it won't install, which I'm assuming it's do to the fact the bootloader is unlocked.
Is there anyway to install March security update using just twrp and downloading files to my phone and see if that'll work?
chill145 said:
So I got in the new USB 2.0 cable and computer still doesn't recognize the phone. I updated drivers and that didn't work either. I also uninstalled drivers but seeing as the computer isn't recognizing phone, it's not installing drivers when the phone is plugged back in.
The phone works except there's an update pending but it won't install, which I'm assuming it's do to the fact the bootloader is unlocked.
Is there anyway to install March security update using just twrp and downloading files to my phone and see if that'll work?
Click to expand...
Click to collapse
Bummer man! You've got a stubborn one, or a bad port. You can download the OTA from here....
https://developers.google.com/android/ota
Then flash it in twrp. However, remember to flash twrp again after the update is finished, then let the phone boot up, then go back to twrp and flash root and custom kernel if you use one :good:
Badger50 said:
Bummer man! You've got a stubborn one, or a bad port. You can download the OTA from here....
https://developers.google.com/android/ota
Then flash it in twrp. However, remember to flash twrp again after the update is finished, then let the phone boot up, then go back to twrp and flash root and custom kernel if you use one :good:
Click to expand...
Click to collapse
I really appreciate the response. Did that and it finally allowed me to connect. Got it all back to stock and my computer is finally recognizing the phone.
The original charger is now also working. Thank you again!
chill145 said:
I really appreciate the response. Did that and it finally allowed me to connect. Got it all back to stock and my computer is finally recognizing the phone.
The original charger is now also working. Thank you again!
Click to expand...
Click to collapse
Well hot damn! Excellent my friend. Glad it all worked out for you. These darn things have a mind of their own at times I think! :good: