I tried multiple ROMs and on Resurrection Remix and Lineage 16 the screen turns yellowish after a couple reboots and I have no idea why. It just acquires a yellowish color and stays that way. Doesn't seem to happen on stock rom. Resurrection Remix was based on Lineage, so could it be something to do with LineageOS? I didn't change any screen settings, no new kernel, nothing. It just turns yellow.
Anybody have an answer?
You may have nightlight turned on?
Anyway - this is what happens to my phone sometimes and I'm on stock ROM. It disappears for some random reason after a few hours.
Cappucinto said:
You may have nightlight turned on?
Anyway - this is what happens to my phone sometimes and I'm on stock ROM. It disappears for some random reason after a few hours.
Click to expand...
Click to collapse
I don't think it's nighlight. Unlesss it really turns on by itself, but I think I checked that option on Resurrection Remix and it wasn't on. It always appeared right after reboot of the phone, after 3-5 reboots, when I was checking the ROMs out before committing to one.
Now I'm on SuperiorOS, really like it, and hope it's doesn't happen.
It looks like old yellow paper effect.
Just switched Daisy on to see night light and it had the same yellowish color. It doesn't have it on boot when Android One is displayed. Just right after OS start, super weird. It's not night light. Night light is much more intense. This is something to do with custom ROMs, I think. But don't know what. Side by side with another phone, it definetely yellow.
Related
Alright, I noticed this the first day, but went on with the assumption that it's normal.
I need you to turn off your Desire HD, go to a quiet room (as quiet as possible, perhaps home, at night) and boot it up. You'll hear a strange noise... not too loud... not many seconds after the bootscreen has appeared. At least... you'll hear it, if this is normal, and not only MY device is affected.
There's also something awkward about the screen, when booting up. The image shifts a bit, like it's being distorted for a fraction of a second, then the screen goes brighter (or whiter? my bootscreen is the default one, but it has 3 skate droids at the bottom). If it happens, you can't miss it, given you're paying attention!
This is not occuring EVERY BOOT, but every boot out of 10, for example, it doesn't happen. Boot the device several times to see whether it is happening or not. PLEASE!
So... please put that to the test. I'm beginning to believe that my device is somewhat faulty or something (that, in addition to the battery suddenly aging) :/
can't test sound issue, but when that pic gets distorted, than it means it's starting to boot and it won't be stuck on boot.img
LorD ClockaN said:
can't test sound issue, but when that pic gets distorted, than it means it's starting to boot and it won't be stuck on boot.img
Click to expand...
Click to collapse
Oh, okay. Good to hear. That sound is occuring just after the... boot.
I was expecting it to be the boot, cause right after that distorsion, the white would get brighter, and... well, that sound...
This wasn't happening when I had the Desire. Or it could have been because I was having a similar stock splash screen, just that it was white text on dark background... But I also had the stock splash screen for a while, and I did not notice it happening. Also, no such sound back on the Desire...
Please test that for the sound, when you can!
Formhault said:
Oh, okay. Good to hear. That sound is occuring just after the... boot.
I was expecting it to be the boot, cause right after that distorsion, the white would get brighter, and... well, that sound...
This wasn't happening when I had the Desire. Or it could have been because I was having a similar stock splash screen, just that it was white text on dark background... But I also had the stock splash screen for a while, and I did not notice it happening. Also, no such sound back on the Desire...
Please test that for the sound, when you can!
Click to expand...
Click to collapse
Is "that sound" the sound of the vibration motor?
Inspire 4G // BlackICE
joedeuce said:
Is "that sound" the sound of the vibration motor?
Inspire 4G // BlackICE
Click to expand...
Click to collapse
Now that you brought that up, it COULD be. I doubt it, since I don't find any purpose in this whatsoever (or the BIOS (bootloader) is testing every hardware piece...? In which case, I suspect the speaker, earpiece and camera + LED would be "lit" up, as well?).
So... you tested it and it's the same for you?
Hi today as usual i was playing with my phone ,battery under 15% appeared.
It was on 12% and i recharge it
After about 2 hour i came back to unplug the charger. I saw the phone is off and it did not turn on !
I take out the battery and Turn it on
But when i turned it on the screen did not showing the colors correctly it was like when you change the color depth in windows from 32bit to 256colors
And a big problem with black colors
Actually the black colors were shown in red And the at&t boot logo signs was remained in screen.
I dont know what happened and the charge level was in 60%
After about 10min the screen became better from top sides but i could feel the att logo in screen
And after 20min it was clear and every thing was ok .
It was frightening and i thought that it damaged.
did anyone had the same problem before?
What happened to this phone !?
I did restart it many time and recharge it. My nitro seems to work fine.
Is the screen damaged ?
Sent from my LG-P930
nss007 said:
Hi today as usual i was playing with my phone ,battery under 15% appeared.
It was on 12% and i recharge it
After about 2 hour i came back to unplug the charger. I saw the phone is off and it did not turn on !
I take out the battery and Turn it on
But when i turned it on the screen did not showing the colors correctly it was like when you change the color depth in windows from 32bit to 256colors
And a big problem with black colors
Actually the black colors were shown in red And the at&t boot logo signs was remained in screen.
I dont know what happened and the charge level was in 60%
After about 10min the screen became better from top sides but i could feel the att logo in screen
And after 20min it was clear and every thing was ok .
It was frightening and i thought that it damaged.
did anyone had the same problem before?
What happened to this phone !?
I did restart it many time and recharge it. My nitro seems to work fine.
Is the screen damaged ?
Sent from my LG-P930
Click to expand...
Click to collapse
I'm having the same issue and having a really hard time finding any info on it. After booting it looks "ok".. but during boot it looks as this person described it: windows in 256 colour mode.. Very strange. My phone drained down to 0% today during work, and I just tried plugging it in and turning it on.
Hopefully this goes away. Running CM10.1 RC5 with Wind 2.3 and I have flashed the new adreno drivers and changed max layers to 2 in build.prop to make camera buttons display properly.
i switched back to modded ics stock after cm10.1 had 3-4 nightlies that didn't even boot and all kinds of bugs in the last 3 weeks, i'm waiting for a stable release to come out before i switch back, i recommend switching back to stock while they deal with recent issues, that's just my opinion tho. u guys could try backing up ur cm10.1 and flashing a stock rom to see if the problem is fixed, even if u decide to switch back to cm after, it's worth a shot.
if flashing a cwm flashable stock modded rom fixes the issue you might want to consider doing a full wipe and going back to rc2 or nightly 19th-22nd of may before the issues started
My busybox install got corrupted and a lot of things got screwed up. So I did a wipe and reflashed cm10.2. Something that got screwy was the led light when charging would stay on even when the screen was on. But after i reflashed it still does it. Of course this is no big deal, I can just turn off the battery led in cm, but I just wanted to know if anyone knew what the issue was. Thank you very much for the help.
gregorina said:
My busybox install got corrupted and a lot of things got screwed up. So I did a wipe and reflashed cm10.2. Something that got screwy was the led light when charging would stay on even when the screen was on. But after i reflashed it still does it. Of course this is no big deal, I can just turn off the battery led in cm, but I just wanted to know if anyone knew what the issue was. Thank you very much for the help.
Click to expand...
Click to collapse
It's supposed to do that.
Skipjacks said:
It's supposed to do that.
Click to expand...
Click to collapse
Really? Wow I must be going crazy or I never used my phone while it's been plugged in with cm10.2. Is there a way to change it so that the charging led only comes on when the screen is off?
Why would it even work this way? You can clearly see it's charging when the screen is on in the status bar. Also, when you go and change the battery charging led color and you want to test it, it even asks you to turn the screen off. Are you sure?
bump for double check
gregorina said:
Really? Wow I must be going crazy or I never used my phone while it's been plugged in with cm10.2. Is there a way to change it so that the charging led only comes on when the screen is off?
Why would it even work this way? You can clearly see it's charging when the screen is on in the status bar. Also, when you go and change the battery charging led color and you want to test it, it even asks you to turn the screen off. Are you sure?
Click to expand...
Click to collapse
I'm sure.
There is a setting to disable to charging light entirely. But not for disabling it only when the screen is on.
You'll just have to live with it. If it bothers you that much, make it a darker color that is less obnoxious to your eyes that is easy to see in a dark room with the screen off but not as 'in your face' when the screen is on.
Is anybody have the same problem? Screen on my 5X sometimes goes black, its still working but its completly black. It is happening when Im using apps like snapchat, facebook, or sometimes i don't even need to do anything, it just go randomly black and after couple pushes of power button or even several restarts of phone screen back to normal. I tried factory reset but it doesn't work.
You should return it for warranty replacement (if you have not installed any custom ROM or modification...)
It happened to my wife's 5x, the replacement phone is just fine
Dashaien said:
Is anybody have the same problem? Screen on my 5X sometimes goes black, its still working but its completly black. It is happening when Im using apps like snapchat, facebook, or sometimes i don't even need to do anything, it just go randomly black and after couple pushes of power button or even several restarts of phone screen back to normal. I tried factory reset but it doesn't work.
Click to expand...
Click to collapse
Are you rooted? This happened to me yesterday twice. I'm on MDB08L, rooted with classic method and xposed installed with gravitybox....
Also, I was low on battery, around 15%
I've had it happen a couple of times too. Seems totally random, doesn't appear to be linked to any particular app, process, or battery state in my case.
I have installed Chroma rom this morning. No black screen since then... I'll update tomorrow.
UPDATE: Second day with chroma, no black screen so far.
Update 2: still no black screen...
Hey y’all
So my phone fell two weeks ago from about 3 feet after a bad hand off as I was showing a pic to someone.
It already had fallen and only suffered a crack along the outer screen from the first fall, but this second drop cracked the inner screen and rendered the lcd useless.
I was still able to turn it off and on, as well as increase/decrease the volume, but screen was showing blue streaks until I just turned it off.
I reset the phone to no avail and eventually got a new replacement screen and frame from witrigs and was able to get the phone into recovery. I wiped the cache and was able to finally get past the boot screen (which displayed fine) but then immediately goes black as it loads up the main OS.
The screen can sense my finger and the touchscreen vibrates when I touch it as if the unlock number pattern screen would appear on the screen but, the screen remains blacked out.
I can turn the volume up and down, power button works fine. I can access twrp and it shows the full screen on the display, but once the OS tries to load the screen blacks out while otherwise functioning as it should.
I checked all of the connections and they’re all good, no loose ends or incorrectly inserted or disjointed pieces, I just can’t get a visual right when the os loads up.
Any ideas if this is hardware/software based? Doesn’t make sense that the screen shows up fine during the initial boot then goes black during the os boot and everything but the screen functions as normal. Thanks
DD
DD83 said:
Hey y’all
So my phone fell two weeks ago
Any ideas folks? Thanks
DD
Click to expand...
Click to collapse
Which rom/kernel you on? You can try another kernel and check
I think I was in resurrection remix 5.8.2. I mostly care about my files but if I can still use the phone that would be ideal.
Just tried flashing the rom I had on before (rr remix n 5.3.5 20180612 release), then dalvik and cache wipe, with the same result. Thanks to anyone that replies and has some insight! Been going on two weeks since my phone was initially dropped to replacing the screen to this! Grrr
DD83 said:
Just tried flashing the rom I had on before (rr remix n 5.3.5 20180612 release), then dalvik and cache wipe, with the same result. Thanks to anyone that replies and has some insight! Been going on two weeks since my phone was initially dropped to replacing the screen to this! Grrr
Click to expand...
Click to collapse
Sometimes there is a drivers issue on replacement of screen. Try OOS and see if it works. Atleast for some people, OOS solved the issue.
tnsmani said:
Sometimes there is a drivers issue on replacement of screen. Try OOS and see if it works. Atleast for some people, OOS solved the issue.
Click to expand...
Click to collapse
Thanks. Should I try a newer more recent oos or one closer to the oos I had installed? Does it matter?
I would ideally like to get back to where my phone was, but if I can’t I’m content with starting over if it means I’ll have a functioning phone.
DD83 said:
Thanks. Should I try a newer more recent oos or one closer to the oos I had installed? Does it matter?
I would ideally like to get back to where my phone was, but if I can’t I’m content with starting over if it means I’ll have a functioning phone.
Click to expand...
Click to collapse
Recent OOS can be tried. There is no link between what OS you had and the OOS you are flashing.
Hope you succeed!
had similiar problems,replaced my screen was using custom roms too i found out cheap screens dont work properly and the only way around this for me was to install caesuim latest kernel cause my screen use to stay black after the screen went to sleep until i installed that kernel works great now
I have a like problem, my oneplus 3 locks the bottom of the screen, already replaced kernel and nothing works, someone has suggested what it can be, the screen has been replaced.
ireaper4592 said:
had similiar problems,replaced my screen was using custom roms too i found out cheap screens dont work properly and the only way around this for me was to install caesuim latest kernel cause my screen use to stay black after the screen went to sleep until i installed that kernel works great now
Click to expand...
Click to collapse
can I install this kernel on OOS latest build?