Develop Bugs

[Q] Bricked with out custon rom??

So I think my phone is hard bricked. I was on G+ ealier today, clicked on a link that opened Chrome. got through a third of the web page and my phone freezes then the screen goes black... I have tried every troubleshoot trick provided by tmobile and samsung and the phone wont respond in any way. Just a black screen. Is it possible to brick your phone with out trying to flash a custom ROM??? The only thing new I have done in the past week was install "graph ti89" and "aviate." I dont know if this has anything to do with it but tmobile has being try to get me to install the kitkat OTA for the last week and I keep ignoring it.

just update
jcampana28 said:
So I think my phone is hard bricked. I was on G+ ealier today, clicked on a link that opened Chrome. got through a third of the web page and my phone freezes then the screen goes black... I have tried every troubleshoot trick provided by tmobile and samsung and the phone wont respond in any way. Just a black screen. Is it possible to brick your phone with out trying to flash a custom ROM??? The only thing new I have done in the past week was install "graph ti89" and "aviate." I dont know if this has anything to do with it but tmobile has being try to get me to install the kitkat OTA for the last week and I keep ignoring it.
Click to expand...
Click to collapse
Hi,
Do the update or factory reset your phone. You can always use KIES also.
Ms. K

Ms. K said:
Hi,
Do the update or factory reset your phone. You can always use KIES also.
Ms. K
Click to expand...
Click to collapse
Thanks for your input but the phone won't turn on at all. Can'T turn it on to update. Won't go into safe mode by pressing vol. up&home&power. When I plug it into the computer it says it needs drivers for "QHSUSB_BULK." Kies doesn't see it as a connected device...

If you haven't done anything to the phone why not call Tmobile and get a replacement..
Sent from my bad ass Kryon infused Note 3

deeznutz1977 said:
If you haven't done anything to the phone why not call Tmobile and get a replacement..
Sent from my bad ass Kryon infused Note 3
Click to expand...
Click to collapse
because i'd like to recover the data that is on the phone.

jcampana28 said:
because i'd like to recover the data that is on the phone.
Click to expand...
Click to collapse
A few threads down you would have found this... http://forum.xda-developers.com/showthread.php?p=47555043
My recovery image is here: http://www.mediafire.com/view/?6nu61z43y51v3k4
You need a 32 GB sd card and some luck. Also reading is a requirement.
Yours may be a special case though, as you claim nothing was going on besides you clicked a link. Should have absolutely nothing to do with ota, and everyone else who had done this was messing with their phone. This definitely works for 4.3, but no one had reported working on 4.4 (you were on 4.3 anyways). Good luck.
Sent from my SM-G900T using Tapatalk

noobtoob said:
A few threads down you would have found this... http://forum.xda-developers.com/showthread.php?p=47555043
My recovery image is here: http://www.mediafire.com/view/?6nu61z43y51v3k4
You need a 32 GB sd card and some luck. Also reading is a requirement.
Yours may be a special case though, as you claim nothing was going on besides you clicked a link. Should have absolutely nothing to do with ota, and everyone else who had done this was messing with their phone. This definitely works for 4.3, but no one had reported working on 4.4 (you were on 4.3 anyways). Good luck.
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Mr Noobtoob, has anyone reported un-bricking a N900t running 4.4.2 (1st release, believe it ends in N94 or similar, NOT NE6)?
If so, did they do anything different?
Be well.

golfcartguy said:
Mr Noobtoob, has anyone reported un-bricking a N900t running 4.4.2 (1st release, believe it ends in N94 or similar, NOT NE6)?
If so, did they do anything different?
Be well.
Click to expand...
Click to collapse
I have not seen a successful report back of the nb4 firmware. Doesn't mean it doesn't work, just don't have confirmation.
Fusionized tweaking tapatalker here...

Thanks for the quick response!
Going to try, and will report back.
To clarify, it must be a Class 10 microsd card, and must be the same size (32gb), 1st formatted to exfat, correct?
Sent using XDA Free mobile app

golfcartguy said:
To clarify, it must be a Class 10 microsd card, and must be the same size (32gb), 1st formatted to exfat, correct?
Click to expand...
Click to collapse
Those are the magic ingredients!
Frank

Frank Westlake said:
Those are the magic ingredients!
Frank
Click to expand...
Click to collapse
Got it! So, to be clear;
1st - Format class 10 card to Exfat file system or structure
2nd - Using Win32Diskmapper, just point to the file (in my case kk900tunbrick image) and write to card. *Nothing special, should I verify Md5 sum, or just leave it as default settings?
3rd, Proceed to attempt to Unbrick (Battery at 100%, Put Sd card in slot, Then Add Battery, Connect cable - some say, some say doesn't matter, to computer, then attempt to boot with button sequence to download mode, or may boot by itself?)
Also, if the 1st image I downloaded does not work, can I reformat or wipe the sd card and start again with the other file (I believe a Pit file??)

Update from PI3 to official Nougat.

I've seen some posts about updates to official Nougat failing, so I decided to upload the update.zip to get to Nougat. I'd like to note that I didn't update using the update.zip method, so let me know if anyone runs into any issues. Hopefully this helps you guys out.
1) Make sure you are on official NON-ROOTED PI3. Also, make sure you enable any disabled packages.
2) Create a folder on your SD card named fota.
3) Download this zip and rename it to update.zip, then put it in the fota folder you created.
4) Turn off the phone and boot into recovery-volume up+home+power at the same time.
5) Wait a minute for the dead android to go away and recovery finally boots, then select update from SD card. Select the update.zip.
Here is the Odin files for PI3 for those that need it. G930VVRU4API3

Testing now
---------- Post added at 11:51 PM ---------- Previous post was at 11:17 PM ----------
Still not working. Didn't get the log though, but there was a mounting error and then I believe I saw something status 7. Not sure what else is wrong.

Are you on PI3?

CVertigo1 said:
Are you on PI3?
Click to expand...
Click to collapse
I am.

Download "Phone Info *Samsung*" from the PlayStore. Open it up and upload a screenshot of the firmware page.

CVertigo1 said:
Download "Phone Info *Samsung*" from the PlayStore. Open it up and upload a screenshot of the firmware page.
Click to expand...
Click to collapse
Thank you for your help.

Everything appears to be in order. Is your SD card encrypted? I recall that being an issue with the beta builds.

CVertigo1 said:
Everything appears to be in order. Is your SD card encrypted? I recall that being an issue with the beta builds.
Click to expand...
Click to collapse
It is not

The best advice I have is to Odin all four PI3 files, but not Home_CSC. It will give you the cleanest install and take everything else out of the equation. I'd backup everything with Smart Switch first, then restore it all after updating.

CVertigo1 said:
I've seen some posts about updates to official Nougat failing, so I decided to upload the update.zip to get to Nougat. I'd like to note that I didn't update using the update.zip method, so let me know if anyone runs into any issues. Hopefully this helps you guys out.
1) Make sure you are on official NON-ROOTED PI3. Also, make sure you enable any disabled packages.
2) Create a folder on your SD card named fota.
3) Download this zip and rename it to update.zip, then put it in the fota folder you created.
4) Turn off the phone and boot into recovery-volume up+home+power at the same time.
5) Wait a minute for the dead android to go away and recovery finally boots, then select update from SD card. Select the update.zip.
Click to expand...
Click to collapse
What if you are on PKC? You think it will still work?

Crsdr37 said:
What if you are on PKC? You think it will still work?
Click to expand...
Click to collapse
Im on pkc also

Probably not, but you are welcome to try. If it doesn't work, then flash back to PI3 and update from there.

Also if you use package disabler pro like most of us. Ensure you go back into there and enable all bloatware you can re-disable after the update goes through

Crsdr37 said:
Also if you use package disabler pro like most of us. Ensure you go back into there and enable all bloatware you can re-disable after the update goes through
Click to expand...
Click to collapse
I already put this in the steps, but I guarantee a lot of people will forget to follow it lol.

I got mine updated. Here's what I did.
I reluctantly used the Verizon software repair tool to "repair" the OS. It took quite a while but did reload everything. After that I just took the OTA and it seemed to work fine. I would imagine that Odin would have worked too.

I'm on a VZ Galaxy S7, PI3 firmware on Boom Mobile (VZ MVNO). Tried OTA update, Samsung Smart Switch and Verizon Software Upgrade. All 3 are showing that my firmware is up-to-date on version 6.0.1 PI3. Have they just not rolled it out to everyone?
Is my only option to use the procedure on here?

mogulman01 said:
I'm on a VZ Galaxy S7, PI3 firmware on Boom Mobile (VZ MVNO). Tried OTA update, Samsung Smart Switch and Verizon Software Upgrade. All 3 are showing that my firmware is up-to-date on version 6.0.1 PI3. Have they just not rolled it out to everyone?
Is my only option to use the procedure on here?
Click to expand...
Click to collapse
Updated using the process from OP, worked fine.

I was on PI3 firmware and I kept checking without getting the new software from yesterday. Just now I connect my phone to the PC and open up Smart Switch, it tells me the new update is available.

I was having this same problem. I couldn't get my phone to take the OTA even after unrooting and I had to end up using Odin and flashing that BL file as well as the other three that you normally flash. give that a go if you're still having problems!

Upgraded directly from PKC (beta) using SamFirm to download and flash new verizon firmware via odin. Worked great. Didn't have to downgrade back to pe1.

Ascend XT2 B130 Update and CleanRom Rom's

Well here we go
This is the First Update for the XT2 in a flashable rom​
This is for those who unlocked their bootloader and installed TWRP and can not take OTA update on their phones
As most here know ower version of TWRP is not complete and cannot decrypt the /data partition
so unfortunately you'll have to wipe your phone to install this update (sorry)
Note This also Removes TWRP and restores Stock Recovery
Flashing instructions
download and copy the Stock_B130_ XT2_H1711.zip to your ex_sdcard
copy Magisk-v16.0.zip to your ex_sdcard (just in case you need to patch the boot.img)
Boot into TWRP swipe to allow system access
Go to Settings check Use rm -fr instead of formatting
next choose Wipe / Format Data / Type "yes" to confirm
Now choose Home / Install /Select storage Micro sd /Stock_B130_ XT2_H1711.zip and Flash it (watch the flash for any Red Errors)
choose wipe cache and then reboot.
If everything went well you should be on B130 and ready to setup your phone
Huge thanks go to @m0000 for sharing his updated files
If you have any problems you'll need to reflash TWRP and Try patching the boot.img with Magisk or restore your last backup or simply flash my B120 stock rom
XT2 B130 CleanRom​
Now that you have a Stock updated phone you may want to remove all the AT&T Bloat
Here's my CleanRom that removes around 350mb of useless junk from the phone.
First you'll need to flash TWRP back to your phone from fastboot
download recoveryV3_Fixed.zip > https://androidfilehost.com/?fid=673956719939832036
and extract it to your fastboot folder
Shutdown the phone
reboot to the bootloader (power + volume down + plugged in to the PC)
and flash it from command prompt with
fastboot flash recovery recoveryV3_Fixed.img
next reboot to TWRP (power + volume up )
Now you can Download the CleanRom and copy it to your ext_sdcard from your pc.
Flashing instructions are the same as above, but you can do a dirty flash by not formatting data like above if you want to keep your current apps
Here's the list of whats removed
Apps deleted from System:
Amazon shopping
App select
Call Protect
Protect Plus
Device Help
Setup & Transfer
CricketWiFiManager
Facebook
Facebook App Installer
Facebook app manager
Gmail
Google Duo
Google Chrome
Google Drive
Google Maps
Google Play Photos
Google Play Video
Google Play Music
Google Text to Speach Engine
Ignite
Lookout
myCricket
Apps deleted from /Data/hwinit/: (If you dirty flashed these will still be on your phone)
Google Editor Slides
Google Editor Sheets
Google Editor Docs
Firefox
Apps deleted from Cust:
AT&T Remote Support
myAT&T
AT&T Hot Spots
Google Talkback
everything in the H1711z folder
The rom includes the patched boot.img from magisk v16 (it's rooted)
This will probably be the only rom I release for this phone because I don't own one.

Awesome. Thank you! So if I flash magisk after I should be able to keep my root then?

clsA said:
Huge thanks go to @m0000 for sharing his updated files
Click to expand...
Click to collapse
No thanks needed. You did all the work I only followed clear directions

freedomwarrior said:
Awesome. Thank you! So if I flash magisk after I should be able to keep my root then?
Click to expand...
Click to collapse
Yes will need to start over ( TWRP & Magisk )
Your phone will be bone stock after flashing the rom
Sent from my LG-H910 using Tapatalk

Alright. I just want to confirm that the update was successful
Out of curiosity I wanted to see if I could relock the bootloader and that finally worked too. (see screenshot) I was never able to do that before on the B120 stock rom so this is great news if I ever decide to sell the phone or just wanna get SafetyNet working correctly.
I went ahead and unlocked my bootloader again and I flashed TWRP through fastboot, Booted into TWRP and flashed magisk v16 in the OP, rebooted and I am enjoying root again with an updated phone.
Thanks again guys!

freedomwarrior said:
Alright. I just want to confirm that the update was successful
Click to expand...
Click to collapse
thanks for the update! All we need now is a @clsA CleanRom for this version

So does anybody know how hard it would be to compile lineage os 14.1 for the elate/ xt2?

903tex said:
So does anybody know how hard it would be to compile lineage os 14.1 for the elate/ xt2?
Click to expand...
Click to collapse
I have no idea but that sure would be awesome! I am guessing it would be a real pain due to the fact Huawei has not released the source code for this phone.

freedomwarrior said:
I have no idea but that sure would be awesome! I am guessing it would be a real pain due to the fact Huawei has not released the source code for this phone.
Click to expand...
Click to collapse
What about the h1611?

MaxxTwo said:
What about the h1611?
Click to expand...
Click to collapse
I am not sure. I don't own that phone.

First post updated

clsA said:
This will probably be the only rom I release for this phone because I don't own one.
Click to expand...
Click to collapse
If you need a guinea pig for future testing let me know. I have one with your CleanRom and a stock unlocked one for any and all future updates.
Thanks!

I really liked this phone, i was actually impressed. I had money to spend on a new budget phone and I was between a ZTE blade spark and this huawei.
ZTE was ok for me because a couple of years ago i bought one of their big phones but their camera sucked a lot of blur and never had focus. sometimes i even had to touch the screen again and again to make it focus, while capturing video. So i gave a shot to this Huawei, went to walmart, they wanted 89 for the phone, told them to check online because it was 69 online and they lowered me the price right away.
then used the huawei for about an hour and damn, the camera is awesome, and the LCD screen is beautiful.
I have to research on how to unlock the bootloader and pay the 5bucks to make that happen.
One thing i noticed is that altho the phone has a 16gb capacity, i was looking at the storage area and you actually end up having something like 7.3gigs free. Is that normal? most of the space is taken by the rom. Your clean rom would help a lot at least to get more space, but how come it only frees 300megs.
and thank you very much for the update. i do know how damn hard it is to update at&t gophones because those assholes only let you update the phone if you have an att simcard inserted that is also activated and you have to be with an IP that is inside USA, and have celular data ON, and sometimes even having all that.. it doesnt even update

ZeldaWW said:
I really liked this phone, i was actually impressed. I had money to spend on a new budget phone and I was between a ZTE blade spark and this huawei.
ZTE was ok for me because a couple of years ago i bought one of their big phones but their camera sucked a lot of blur and never had focus. sometimes i even had to touch the screen again and again to make it focus, while capturing video. So i gave a shot to this Huawei, went to walmart, they wanted 89 for the phone, told them to check online because it was 69 online and they lowered me the price right away.
then used the huawei for about an hour and damn, the camera is awesome, and the LCD screen is beautiful.
I have to research on how to unlock the bootloader and pay the 5bucks to make that happen.
One thing i noticed is that altho the phone has a 16gb capacity, i was looking at the storage area and you actually end up having something like 7.3gigs free. Is that normal? most of the space is taken by the rom. Your clean rom would help a lot at least to get more space, but how come it only frees 300megs.
and thank you very much for the update. i do know how damn hard it is to update at&t gophones because those assholes only let you update the phone if you have an att simcard inserted that is also activated and you have to be with an IP that is inside USA, and have celular data ON, and sometimes even having all that.. it doesnt even update
Click to expand...
Click to collapse
Instructions for DC Unlocker are here
https://r.tapatalk.com/shareLink?ur...share_tid=3780903&share_fid=3793&share_type=t
Sent from my LG-H910 using Tapatalk

@clsA
At&t is trying to push another software update to my phone. Is this the B130 we already have or a new one?

freedomwarrior said:
@clsA
At&t is trying to push another software update to my phone. Is this the B130 we already have or a new one?
Click to expand...
Click to collapse
Looks like b173
You would need to return to stock b130
To attempt the update
Sent from my LG-H910 using Tapatalk

freedomwarrior said:
@clsA
At&t is trying to push another software update to my phone. Is this the B130 we already have or a new one?
Click to expand...
Click to collapse
clsA said:
Looks like b173
You would need to return to stock b130
To attempt the update
Sent from my LG-H910 using Tapatalk
Click to expand...
Click to collapse
B130_B173_ATT is the files i sent to clsA for his b130 rom. i've not received any notification on a newer update yet.
@freedomwarrior nice dark theme btw. what are you using?
Thanks

m0000 said:
B130_B173_ATT is the files i sent to clsA for his b130 rom. i've not received any notification on a newer update yet.
@freedomwarrior nice dark theme btw. what are you using?
Thanks
Click to expand...
Click to collapse
Awe ok. That would just be att update being stupid then.
I am using Pure Dark 5.0. So far it is the best dark theme I have come across.
https://play.google.com/store/apps/details?id=sk.hanni.emuithemes.puredark

freedomwarrior said:
Awe ok. That would just be att update being stupid then.
I am using Pure Dark 5.0. So far it is the best dark theme I have come across.
https://play.google.com/store/apps/details?id=sk.hanni.emuithemes.puredark
Click to expand...
Click to collapse
Awesome, i'll check it out. Are the ads annoying? or can disable with a proper ad blocker?
Thanks

m0000 said:
Awesome, i'll check it out. Are the ads annoying? or can disable with a proper ad blocker?
Thanks
Click to expand...
Click to collapse
No ads so far that I have noticed.

At&t just released the Android 10 / One UI 2.0 update!

Was over 2gb, currently installing on my At&t S10+.
Probably not going to do a factory reset today, but will within the week. I usually do that on major updates.

tele_jas said:
Was over 2gb, currently installing on my At&t S10+.
Probably not going to do a factory reset today, but will within the week. I usually do that on major updates.
Click to expand...
Click to collapse
Changelog?

tele_jas said:
Was over 2gb, currently installing on my At&t S10+.
Probably not going to do a factory reset today, but will within the week. I usually do that on major updates.
Click to expand...
Click to collapse
Good grief! 2GB!?!?! I have an AT&T S10+ here and I have yet to receive the update. I don't know if I even want it, but I know my phone will force it eventually.

This is beautiful news because now the unlocked model (U1) will get it officially soon as well.

Baseband version:
G970USQU2CSKP (GS10e)
G973USQU2CSKP (GS10)
G975USQU2CSKP (GS10+)
G977UUCS3YSJM (S10 5G)

Still no update here, AT&T is slow getting the update to my phone. I am kind of thankful as I like Android 9. And no I haven't tried to manually do it either.

Downloading now.

StoneyJSG said:
Still no update here, AT&T is slow getting the update to my phone. I am kind of thankful as I like Android 9. And no I haven't tried to manually do it either.
Click to expand...
Click to collapse
You can install any vendors rom since all US S10+ are the same. It will setup according to the installed sim card, if you odin in the rom. You don't have to wait for AT&T, just install any CSKP rom for the U version. They have not released the U1 version yet.

StoneyJSG said:
Still no update here, AT&T is slow getting the update to my phone. I am kind of thankful as I like Android 9. And no I haven't tried to manually do it either.
Click to expand...
Click to collapse
Thankful? Android 10 is not a major update, so you'll hardly notice any difference.

Oh I know, just waiting for AT&T to force the update on me so I don't have to ODIN around and it wipe all my data from flashing a ROM.

HolyHog said:
You can install any vendors rom since all US S10+ are the same. It will setup according to the installed sim card, if you odin in the rom. You don't have to wait for AT&T, just install any CSKP rom for the U version. They have not released the U1 version yet.
Click to expand...
Click to collapse
I thin you can do the same for the U1 versions, it's all the same across all carriers as well as the unlocked version.
Sent from my SM-G973U1 using Tapatalk

barondebxl said:
I thin you can do the same for the U1 versions, it's all the same across all carriers as well as the unlocked version.
Sent from my SM-G973U1 using Tapatalk
Click to expand...
Click to collapse
Yes, you can. I was on the beta 10 program with a U1 version and just loaded a U version of the official release to get off that beta. As soon as they make the U1 official, I will load it up.

HolyHog said:
Yes, you can. I was on the beta 10 program with a U1 version and just loaded a U version of the official release to get off that beta. As soon as they make the U1 official, I will load it up.
Click to expand...
Click to collapse
Ehy would you load it up if it's the same? Just curious. Where can I grab the S10 version?
Sent from my SM-G973U1 using Tapatalk

barondebxl said:
Ehy would you load it up if it's the same? Just curious. Where can I grab the S10 version?
Sent from my SM-G973U1 using Tapatalk
Click to expand...
Click to collapse
The U1 version has no vendor apps or bloat. The ROM itself installs smaller on your phone. The main reason I do it is to not have vendor apps installed that I will never use and typically can't un-install.
I get my roms from www.sammobile.com. It is slow download but always finishes properly. They also seem to be the first source to have the latest versions.

HolyHog said:
The U1 version has no vendor apps or bloat. The ROM itself installs smaller on your phone. The main reason I do it is to not have vendor apps installed that I will never use and typically can't un-install.
I get my roms from www.sammobile.com. It is slow download but always finishes properly. They also seem to be the first source to have the latest versions.
Click to expand...
Click to collapse
Thanks man. Do they have it for the regular S10? And do I flash it via Odin? I always forget how to do this.
Sent from my SM-G973U1 using Tapatalk

barondebxl said:
Thanks man. Do they have it for the regular S10? And do I flash it via Odin? I always forget how to do this.
Sent from my SM-G973U1 using Tapatalk
Click to expand...
Click to collapse
Yes, search for phone model as a U model.
Here are the instructions Sammobile gives you:
Extract the firmware file you just downloaded. You should get 5 files:
AP (System &Recovery)
BL (Bootloader)
CP (Modem / Radio)
CSC_*** (Country / Region / Operator)
HOME_CSC_*** (Country / Region / Operator)
Add each file to its respective field in Odin v3.14.1.3B Use CSC_*** if you want to do a clean flash OR HOME_CSC_*** if you want to keep your apps and data.
Reboot your phone in Download / Odin mode (make sure your device is off) with the following button combo: POWER + VOLUME DOWN + BIXBY
Other options in case first option did not work or isn't possible.
Option 2 VOLUME DOWN + VOLUME UP then USB cable
Option 3 POWER + VOLUME DOWN + VOLUME UP
Option 4 POWER + VOLUME DOWN + HOME BUTTON
Option 5 (Note9) USB cable + VOLUME DOWN + BIXBY
Option 6 (Note10) POWER + VOLUME UP
Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)
Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
Click the start button, wait for Odin to say 'PASS' in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC.
© 2019 SamMobileSupportTeamGiveawayContactTerms & ConditionsPrivacy & CookiesPartner: Galaxy Club

HolyHog said:
Yes, search for phone model as a U model.
Here are the instructions Sammobile gives you:
Extract the firmware file you just downloaded. You should get 5 files:
AP (System &Recovery)
BL (Bootloader)
CP (Modem / Radio)
CSC_*** (Country / Region / Operator)
HOME_CSC_*** (Country / Region / Operator)
Add each file to its respective field in Odin v3.14.1.3B Use CSC_*** if you want to do a clean flash OR HOME_CSC_*** if you want to keep your apps and data.
Reboot your phone in Download / Odin mode (make sure your device is off) with the following button combo: POWER + VOLUME DOWN + BIXBY
Other options in case first option did not work or isn't possible.
Option 2 VOLUME DOWN + VOLUME UP then USB cable
Option 3 POWER + VOLUME DOWN + VOLUME UP
Option 4 POWER + VOLUME DOWN + HOME BUTTON
Option 5 (Note9) USB cable + VOLUME DOWN + BIXBY
Option 6 (Note10) POWER + VOLUME UP
Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)
Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
Click the start button, wait for Odin to say 'PASS' in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC.
[emoji2398] 2019 SamMobileSupportTeamGiveawayContactTerms & ConditionsPrivacy & CookiesPartner: Galaxy Club
Click to expand...
Click to collapse
You rock thanks man!
Sent from my SM-G973U1 using Tapatalk

Does anyone have the AT&T user data file that comes with the One UI 2.0 update? I flashed the update without the user data file and I suspect that might have something to do with why my advanced messaging option (RCS) is no longer working in Samsung Messages.

Jomino said:
Does anyone have the AT&T user data file that comes with the One UI 2.0 update? I flashed the update without the user data file and I suspect that might have something to do with why my advanced messaging option (RCS) is no longer working in Samsung Messages.
Click to expand...
Click to collapse
For the user data file, talk to @iBowToAndroid about that.
My RCS in Samsung messages stopped working on the BSIP build. Currently on BSIW. AT&T hasn't forced me to update to Android 10 yet.

StoneyJSG said:
For the user data file, talk to @iBowToAndroid about that.
My RCS in Samsung messages stopped working on the BSIP build. Currently on BSIW. AT&T hasn't forced me to update to Android 10 yet.
Click to expand...
Click to collapse
So I've used @iBowToAndroid's AT&T user data file in the past with flying colors, but I wonder if AT&T has possibly altered the file with the new update? Probably not but right now i'm backing up my phone and doing a factory reset to see if that fixes anything.

Question OnePlus Pro 9 - No Sim Card Error?

This phone is about 5 months old and recently (2 weeks ago) it started to randomly display "no sim card" error randomly until you reboot the device.
Has anyone encountered / found a fix for this?
Currently the sim is working but may stop working again. Ordered a new one from my provider to test.

immortalwon said:
This phone is about 5 months old and recently (2 weeks ago) it started to randomly display "no sim card" error randomly until you reboot the device.
Has anyone encountered / found a fix for this?
Currently the sim is working but may stop working again. Ordered a new one from my provider to test.
Click to expand...
Click to collapse
I am shocked! I know you can figure this out. Just step away for a few minutes and clear you mind and then come back to the problem with a fresh look. In the mean time I will try to find something.

Possible to re-flash the modem. It may be corrupt?

TheGhost1951 said:
Possible to re-flash the modem. It may be corrupt?
Click to expand...
Click to collapse
I reset my network settings via the system options and so far, it has not done it again. Will wait and see. I have another sim card coming in the mail as well. If after the above 2 things I've done do not work, will try a new firmware reflash.

Upon further inspection, it seems the no sim card error is caused by using airplane mode. If I disable airplane mode, the device doesn't re-detect the sim card until you reboot. Any fixes for this beside upgrading firmware? I am still using old a11 firmware.

Stock firmware? Phone model #?

TheGhost1951 said:
Stock firmware? Phone model #?
Click to expand...
Click to collapse
A11, Oxygen OS 11.2.5.5 LE15AA

I guess I was not clear enough, is your phone on factory firmware, not converted to global?

TheGhost1951 said:
I guess I was not clear enough, is your phone on factory firmware, not converted to global?
Click to expand...
Click to collapse
The firmware that I mentioned above is global. One Plus Pro 9

Ok, try one more time. Did you convert your phone to global?

TheGhost1951 said:
Ok, try one more time. Did you convert your phone to global?
Click to expand...
Click to collapse
Lol no, there's no need to convert to global since the firmware itself is already global. I am not using a t-mobile phone. Purchased unlocked. I never messed with param or modem. It is direct firmware flashed / downloaded from the repo here:
[OnePlus 9 Pro][ROM][OTA][Oxygen OS] Repo of Oxygen OS Builds
As OnePlus doesn't always provide download links for all of their OxygenOS ROMs & OTA update zips, we've created an index to put the links in one post so that they're easy to find. Note: This is not a support thread for issues you may have with...
forum.xda-developers.com
11.2.5.5: OnePlus9ProOxygen_22.O.08_GLO_0080_2105011321
MD5: 3b6d1ec374b1da77af532c2e47180c1f
That is the original firmware the phone came with, of course I flashed a bunch of other stuff.

It is possible that the sim card is at fault, if the new card does not fix the issue, maybe re-flash the modem that is all that I can offer at this time.

TheGhost1951 said:
It is possible that the sim card is at fault, if the new card does not fix the issue, maybe re-flash the modem that is all that I can offer at this time.
Click to expand...
Click to collapse
I will try, the sim should be arriving today or tomorrow, latest. If it doesn't fix anything, will use MSM to go completely factory and take it from there.

Fixed, had to format everything fully and reinstall everything. Working like it should on a11.
The sim card was not the problem. Somehow when I restored my internal data with a twrp script, it messed up a bunch of stuff.

immortalwon said:
Fixed, had to format everything fully and reinstall everything. Working like it should on a11.
The sim card was not the problem. Somehow when I restored my internal data with a twrp script, it messed up a bunch of stuff.
Click to expand...
Click to collapse
Yeah, I have had issues with twrp and that is why I don't backup with twrp. Glad you got it fixed!