Develop Bugs

[Q] Need Help!! First time EVO Root/CM6 gone bad...

OK....long story short...finally decided to delve into rooting and custom roms. Flashed CM6 yesterday and everything was going great. Then suddenly yesterday evening as I was swiping between home screens on my device everything froze, and I have been trying to recover ever since.
Anything I flash now just freezes, and i have a touch panel-fail so even when i do get a rom to boot i cant actually get into set it to usb mode or anything.
using bootloader i can not get it to connect using the adb driver so that I can push via adb.
about an hour ago I was successfully able to run the latest RUU and it ran successfully, but device is still way laggy (takes 15 minutes to boot) and no touch screen.
Any help would be greatly appreciated!!! don't know where to go from here. From what I have read its not bricked because I can get into Bootloader and Recovery???

Just a shot in the dark here, but it sounds like since you're stock now it's an actual hardware failure.

lil-dice said:
Just a shot in the dark here, but it sounds like since you're stock now it's an actual hardware failure.
Click to expand...
Click to collapse
Is there way I can verify that the RUU did indeed flash *EVERYTHING* back to stock?

It seen like you have a HARDWARE issues, Re-Boot the Stock Rom. Call Sprint and explain what's going on with your phone, please *DO NO'T MENTION YOU ROOTED YOUR PHONE* Tell them you try to wipe your phone and it was really laggy before you wipe, since you gonna Re-Boot the stock rom the phone is going to get UNROOTED, I know this cause I work at Sprint... So good luck...

jalexishg said:
It seen like you have a HARDWARE issues, Re-Boot the Stock Rom. Call Sprint and explain what's going on with your phone, please *DO NO'T MENTION YOU ROOTED YOUR PHONE* Tell them you try to wipe your phone and it was really laggy before you wipe, since you gonna Re-Boot the stock rom the phone is going to get UNROOTED, I know this cause I work at Sprint... So good luck...
Click to expand...
Click to collapse
I definitely wont rule out hardware issues...this is a refurb device i just swapped my original EVO for on Monday. I guess I just want to rule out any software issues for sure.
You mention that re-booting the stock rom will UNROOT the phone...however I hav no way to currently re-boot the rom??

Also looks like i can not get into recovery now, when I select the option in the bootloader it just takes me to the screen with a picture of a device and a red triangle

azkevman said:
I definitely wont rule out hardware issues...this is a refurb device i just swapped my original EVO for on Monday. I guess I just want to rule out any software issues for sure.
You mention that re-booting the stock rom will UNROOT the phone...however I hav no way to currently re-boot the rom??
Click to expand...
Click to collapse
Get a Memory Card adapter for PC or use anything that will let you connect your SD card to your computer... As soon as you put the *ORIGINAL STOCK ROM* in your SD card your phone will do everything by itself...

jalexishg said:
Get a Memory Card adapter for PC or use anything that will let you connect your SD card to your computer... As soon as you put the *ORIGINAL STOCK ROM* in your SD card your phone will do everything by itself...
Click to expand...
Click to collapse
ok, going to try this now...
I assume I need to load it onto my sd card as the pc36IMG.zip so that i can load it from the bootloader?

you got it...just put it on the root of sdcard and good luck.
Sent from my PC36100 using Tapatalk

azkevman said:
ok, going to try this now...
I assume I need to load it onto my sd card as the pc36IMG.zip so that i can load it from the bootloader?
Click to expand...
Click to collapse
Yeah... Good luck... Let me know how everything went..

OK, so I loaded this ROM: http://forum.xda-developers.com/showthread.php?t=874091 onto my sd card as PC36IMG.zip
It loads the zip then says parsing for about 1 second then just reverts back to the HBOOT option ???
Doesn't ask me if i want to install????

Looks like I grabbed only the OTA update rom that was posted on that page. I am going to try the odexed version on this page: http://forum.xda-developers.com/showthread.php?t=874251

azkevman said:
Looks like I grabbed only the OTA update rom that was posted on that page. I am going to try the odexed version on this page: http://forum.xda-developers.com/showthread.php?t=874251
Click to expand...
Click to collapse
I can upload the version I use... Give a sec.(Uploading)

OK here you go !! http://www.megaupload.com/?d=EKDYV9I5 I hope this help you !

jalexishg said:
OK here you go !! http://www.megaupload.com/?d=EKDYV9I5 I hope this help you !
Click to expand...
Click to collapse
Thanks, I will let you know how it goes.

is nand unlocked on the phone?

asafegous said:
is nand unlocked on the phone?
Click to expand...
Click to collapse
I think so, on the bootloader it still shows "S-off" ...doesn't that indicate it is still unlocked?

OK, so I was able to flash the file in the bootloader. It looks like it won't load past the 'HTC EVO 4g' splash screen.
ARGGGGGGGGGGGGGG!!!!!!!!!!!!

But the Installation finish without problems ?

jalexishg said:
But the Installation finish without problems ?
Click to expand...
Click to collapse
yeah, as far as i can tell. It said it completed and gave me the option to press the power button to reboot.
It did finally load up...after about 15 minutes, but touchscreen is still erroring out and not funtional.

[Q] Sprint Galaxy S III Rooted/Installed ROM... Now won't power on. Help!

Hi everyone. I'm new to the forum and I'm looking for a little help today.
I rooted my new Sprint Galaxy S III using Odin3-v3.04, and CWM_SuperUser_v3.0.7. Afterwards I rebooted and all was good.
I then downloaded I9300_Omega_v6.0_XXALF6 ROM and loaded on my phone and rebooted into recovery to install the ROM. I went through the install process, selected remove bloatware and installed. When finished I checked the reboot phone and clicked finish. The phone turned off and didn't ever turn back on.
I have pulled the battery and tried to power on using recovery, download mode and just power but nothing works.
Anyone have any idea what I can do?
Thank you for your time and help.

alexanderd said:
Hi everyone. I'm new to the forum and I'm looking for a little help today.
I rooted my new Sprint Galaxy S III using Odin3-v3.04, and CWM_SuperUser_v3.0.7. Afterwards I rebooted and all was good.
I then downloaded I9300_Omega_v6.0_XXALF6 ROM and loaded on my phone and rebooted into recovery to install the ROM. I went through the install process, selected remove bloatware and installed. When finished I checked the reboot phone and clicked finish. The phone turned off and didn't ever turn back on.
I have pulled the battery and tried to power on using recovery, download mode and just power but nothing works.
Anyone have any idea what I can do?
Thank you for your time and help.
Click to expand...
Click to collapse
development area has a thread for that:
http://forum.xda-developers.com/showthread.php?t=1727171
ONLY use ROMs that you'll find here in these threads not the I9300; that s a different phone from ours.

Thanks I'll check there.

Honestly I was waiting for this to happen gid luck restoring it phone
Sent from my SPH-L710 using XDA

But seriously I hope you learned your lesson and will read and hope you get your phone fixed or replaced
Sent from my Sprint Galaxy Nexus CDMA using Xparent ICS Blue Tapatalk 2

Epix4G said:
But seriously I hope you learned your lesson and will read and hope you get your phone fixed or replaced
Sent from my Sprint Galaxy Nexus CDMA using Xparent ICS Blue Tapatalk 2
Click to expand...
Click to collapse
Hopefully this fail helps us all back from a potential brick. We live, flash and learn.
Sent from my SPH-D700 using xda premium

New phone on the way!
I was able to get a replacement sent from Sprint. Had to go to a corporate store and have a tech look at the phone and they agreed it was toast...
Luckily they didn't know it was due to my failed attempt to load an unsupported ROM.
Lesson learned... new phone should be in by the end of the week.
I'll be waiting for a supported ROM this time.

alexanderd said:
I was able to get a replacement sent from Sprint. Had to go to a corporate store and have a tech look at the phone and they agreed it was toast...
Luckily they didn't know it was due to my failed attempt to load an unsupported ROM.
Lesson learned... new phone should be in by the end of the week.
I'll be waiting for a supported ROM this time.
Click to expand...
Click to collapse
No wonder our insurance deductibles keep going up...

bizdady said:
No wonder our insurance deductibles keep going up...
Click to expand...
Click to collapse
+1
Still sucks for op
Sent from my SPH-L710 using Tapatalk 2

matrixzone5 said:
Honestly I was waiting for this to happen gid luck restoring it phone
Sent from my SPH-L710 using XDA
Click to expand...
Click to collapse
Oh man tell me about it, I almost stupidly went on to the CM9 nightlies and downloaded the I9300 version before I thought to myself, "well wait a minute, that's not my model number!"
Duh, shoulda had a V8.

I didnt install a GSM rom but still managed to brick somehow. Didnt touch any system files or do anything to where i should be bricked either. Any idea when a full stock Odin package will be made? My phone has been bricked for almost 2 days now
Edit: i started a tread here a few days ago -> http://forum.xda-developers.com/showthread.php?t=1731416 if anyone cares to look or has any advice for me
Thanks

pizzlewizzle said:
I didnt install a GSM rom but still managed to brick somehow. Didnt touch any system files or do anything to where i should be bricked either. Any idea when a full stock Odin package will be made? My phone has been bricked for almost 2 days now
Edit: i started a tread here a few days ago -> http://forum.xda-developers.com/showthread.php?t=1731416 if anyone cares to look or has any advice for me
Thanks
Click to expand...
Click to collapse
What have you tried so far? Have you tried reflashing cwm recovery in Odin?

I did the same thing that the OP said, flashed that omega rom and now my phone wont turn on either.
I was going to try the jig method

taygutta said:
I did the same thing that the OP said, flashed that omega rom and now my phone wont turn on either.
I was going to try the jig method
Click to expand...
Click to collapse
Have you tried mskip's fix??
http://forum.xda-developers.com/showthread.php?t=1727171

bizdady said:
Have you tried mskip's fix??
http://forum.xda-developers.com/showthread.php?t=1727171
Click to expand...
Click to collapse
I want to do this but I somehow need to get the phone on. The buttons dont work.

Any luck?
My phone got stuck booting, so I tried to install the omega rom. The install worked well, and I clicked "reboot." Now the phone won't turn on. I can't get to ODIN or recovery anymore.
Did you guys find any fixes?

brickeds3 said:
My phone got stuck booting, so I tried to install the omega rom. The install worked well, and I clicked "reboot." Now the phone won't turn on. I can't get to ODIN or recovery anymore.
Did you guys find any fixes?
Click to expand...
Click to collapse
What happened is that you flashed a rom that was meant for the international version of the S3 and your on the US version. The only fix I have found is to send it to mobiletechvideos.com. I did and they say they can fix it and maybe save my data I have on it ( I just sent it in)
My fingers are crossed for the data recovery but as far as the phone I am going to send it for a exchange anyway.

Welp, I'm sad to say I just did the same thing too. Should have read. I'm a stinkin noob at this. I installed the I9300 version on a US version phone. Has there been any more development on this? Is the hardware fried, or is there a fix through that mobiletechvideos.com that was mentioned? What was the outcome of that, Taygutta, if you don't mind me re-bringing back up a potentially painful topic?? This thread made me a little sick, since it's my brother's new phone (someone else that knew what they were doing rooted it for him but he didn't like the rom, so I thought I would help him find a few other options to try flashing.)
Anyway, any confirmation that I'm buying my brother a new phone (so I can emotionally prepare for the purchase) or are there some other options?

There's one more thing you can try. There's a little device called a USB Jig. It was made for SGS-2 to clear the yellow triangle and reset flash counts in ODIN mode. It also puts your phone in ODIN mode by simply plugging it into the USB port of a powered down phone. Once in ODIN mode, you can reflash a stock ROM, recovery, etc. You can buy these for around $20 or less on the web.
If this does not work, I'm afraid nothing will.
Good luck.

6uPMAH said:
There's one more thing you can try. There's a little device called a USB Jig. It was made for SGS-2 to clear the yellow triangle and reset flash counts in ODIN mode. It also puts your phone in ODIN mode by simply plugging it into the USB port of a powered down phone. Once in ODIN mode, you can reflash a stock ROM, recovery, etc. You can buy these for around $20 or less on the web.
If this does not work, I'm afraid nothing will.
Good luck.
Click to expand...
Click to collapse
Somewhere in the thread an answer exists. You are not the first to do this.
I think the jig is the best way.
Sent from my SPH-L710 using Tapatalk 2

Sudden Boot Loops - I'm Lost

I've been using my Galaxy Nexus for a month or so, with the official JB ROM (JR30C or whatever, deodexed and rooted) and today I opened Gmail.
That's it. I opened GMail, switched accounts, and my phone has been bootlooping ever since.
I wiped everything in CWM multiple times and reflashed it, and I can't get the phone to do anything else.
Any clues?

Do you have a working nandroid? Have you tried flashing a different ROM?
Allons-y

Xfanatic said:
Do you have a working nandroid? Have you tried flashing a different ROM?
Allons-y
Click to expand...
Click to collapse
I do not have a working NANDROID. I wasn't sure about the Internet policies at work, but it looks like I can at least make it on here, I'm not sure I'll be able to download another ROM.
I'm confused though, I mean I know it would help to try as many options as possible (to fix it) - but this ROM has been working for weeks. And the phone died randomly, not due to a recent file change or a botched program. The only boot loops I've experienced before were on the Nexus One, and it was always due to a buggy/bad flash or a corrupted ROM download - this one just developed epilepsy on its own...

Here's my plan, since these are the only things I can manage to download due to restrictions on Internet usage at work.
Factory 4.1.1 takju image from here : https://developers.google.com/android/nexus/images#takju
Modified ODIN software here: http://forum.xda-developers.com/showthread.php?t=1586807
ODIN won't rewrite my bootloader, recovery, or userdata, since I already OEM unlocked, but will reflash a stock image.
EDIT: ODIN won't do anything with my device. Trying this ROM instead:
http://forum.xda-developers.com/showthread.php?t=1801664 was using bigxie OTA before.

is your (sd)storage recognized? thus is a similar symptom to when the stirage goes bad.

Hook the phone up to adb, boot it, and let logcat run. Maybe that will turn something up.
Sent from my Galaxy Nexus using Tapatalk 2

simms22 said:
is your (sd)storage recognized? thus is a similar symptom to when the stirage goes bad.
Click to expand...
Click to collapse
Hmm, you know, I'm not able to find the option to mount to USB in CWM...and just in case I forgot where that is, when I plug it in, I get the "hardware failed" noise from Windows and not the usual friendly "plug in" sound.
infazzdar said:
Hook the phone up to adb, boot it, and let logcat run. Maybe that will turn something up.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I'm at work, and I only have my work computer. Group/secpolicy won't allow me to install anything, no admin rights, etc.
Would it even do anything? The phone barely makes it through one second of the boot animation before it loops.

sheik124 said:
Hmm, you know, I'm not able to find the option to mount to USB in CWM...and just in case I forgot where that is, when I plug it in, I get the "hardware failed" noise from Windows and not the usual friendly "plug in" sound.
Click to expand...
Click to collapse
you cant mount the sd card. there is no USB mass storage period. not in recovery or booted normally.

Zepius said:
you cant mount the sd card. there is no USB mass storage period. not in recovery or booted normally.
Click to expand...
Click to collapse
Oy. Then how do I get another ROM on here? fastboot/adb?

sheik124 said:
Oy. Then how do I get another ROM on here? fastboot/adb?
Click to expand...
Click to collapse
Adb push.
Sent from my Galaxy Nexus using Tapatalk 2

Zepius said:
you cant mount the sd card. there is no USB mass storage period. not in recovery or booted normally.
Click to expand...
Click to collapse
sheik124 said:
Oy. Then how do I get another ROM on here? fastboot/adb?
Click to expand...
Click to collapse
Got more than one additional ROM on there via adb/recovery - my clue that CWM hasn't actually been able to do anything since the phone start looping is I'm still getting my custom boot animation.
I'm using the toolkit to reflash a stock image now. What a mess.
Even reflashing a stock image via fastboot did nothing. WTF happened to my phone? Won't stay on long enough to get a logcat

I'm having the same problem as this guy:
http://forum.xda-developers.com/showthread.php?t=1827685&page=2
I just got finished trying to flash 4.1.1 using ODIN. It still shows me the custom animation from bigxie's ROM (which has supposedly since been overwritten 2-4x times).
Screw you Samsung...this phone is a month old, I flashed -once- to rooted Jelly Bean, and the phone dies when I open the GMail app.
EDIT: WTF - I write screw you Samsung, it boots to the Welcome screen! Just long enough for me to see that my files aren't on it anymore, then it bootloops again. And again. Now it's re-stuck in a bootloop.
And now I'm at the homescreen. I can't rely on this thing like this...is my flash dying or something?

Nobody?
It worked long enough for me to re-enter all of my different Google account information and now it's dead again. Now it only flashes the boot animation for a split second for bootlooping.

I'm thinking of a hardware defect.
Beamed from my Grouper

Mach3.2 said:
I'm thinking of a hardware defect.
Beamed from my Grouper
Click to expand...
Click to collapse
Mee too. As you can see from my signature, I gave up and bought a One S yesterday night from Craigslist. Feels like a true successor to the Desire / N1. It's nice to finally have an AMOLED screen that actually seems color calibrated after the ugly mess that was my RAZR and my less than perfect GNex. It's a damn shame how much more painless flashing a recovery was on this thing.
Sent from my HTC VLE_U using xda app-developers app

SGH-i747M - Failed flash wont turn on

Hey guys,
I messed up.. I flashed a modem for the updated version of S3RX, not my current version (4.2.1) and that resulted in a pretty hardcore brick.The only response its giving is the red light with the charger plugged in and battery removed, as well as the QHUSB_DL message on the computer when connected.
I tried imaging a debrick image onto a SD card, and doing that but it didn't work but I'll outline what I did anyway just encase I'm doing it wrong.
1. Using Patriot LX 32gb MicroSDHC card
2. Imaged a debrick file another user provided from their phone (4.2.1) using win32imager
3. Put the SD card in, no battery, power cord removed
4. Put battery in
5. Did button combination for download mode
6. Phone didn't respond
So is there anything else I can try or do I need to get someone to jtag it for me :/

Yumz said:
Hey guys,
I messed up.. I flashed a modem for the updated version of S3RX, not my current version (4.2.1) and that resulted in a pretty hardcore brick.The only response its giving is the red light with the charger plugged in and battery removed, as well as the QHUSB_DL message on the computer when connected.
I tried imaging a debrick image onto a SD card, and doing that but it didn't work but I'll outline what I did anyway just encase I'm doing it wrong.
1. Using Patriot LX 32gb MicroSDHC card
2. Imaged a debrick file another user provided from their phone (4.2.1) using win32imager
3. Put the SD card in, no battery, power cord removed
4. Put battery in
5. Did button combination for download mode
6. Phone didn't respond
So is there anything else I can try or do I need to get someone to jtag it for me :/
Click to expand...
Click to collapse
Can you try it with a 16GB card? Ive had some people report failure(except one) with cards larger than 16GB and thus far everyone who has tried it with a 16GB have been succesful. (that I am aware of or atleast the ones who didnt flash a bootloader from a different device model)
Also I was told by -Mr. X- who is where I learned of this process that sometimes you may have to flash the IMG file on the sd card several times and try to access download mode several times before you obtain success.

theramsey3 said:
Can you try it with a 16GB card? Ive had some people report failure(except one) with cards larger than 16GB and thus far everyone who has tried it with a 16GB have been succesful. (that I am aware of or atleast the ones who didnt flash a bootloader from a different device model)
Also I was told by -Mr. X- who is where I learned of this process that sometimes you may have to flash the IMG file on the sd card several times and try to access download mode several times before you obtain success.
Click to expand...
Click to collapse
I have a 32gb one, I'd have to buy a 16gb but I'm more than willing to do that
So when you say flash the IMG file on the sd card several times, do you literally mean do it once, twice, ect.. all in a row?? Because I've only been doing that once each time. I have tried the second part of what you were saying though, I did try many accessing download mode at least seven times

Yumz said:
I have a 32gb one, I'd have to buy a 16gb but I'm more than willing to do that
So when you say flash the IMG file on the sd card several times, do you literally mean do it once, twice, ect.. all in a row?? Because I've only been doing that once each time. I have tried the second part of what you were saying though, I did try many accessing download mode at least seven times
Click to expand...
Click to collapse
Yes exactly write the file several times in a row then try again. - Mr. X- has successfully used a 32GB card so try again. There is still some hope
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

theramsey3 said:
Yes exactly write the file several times in a row then try again. - Mr. X- has successfully used a 32GB card so try again. There is still some hope
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I see, okay I'll try that!
Thank you for your advice so far by the way
edit: No luck with doing that :/ What's the chances a 16gb would work instead do you think? Also, would partitioning it work?

I
Yumz said:
I see, okay I'll try that!
Thank you for your advice so far by the way
edit: No luck with doing that :/ What's the chances a 16gb would work instead do you think? Also, would partitioning it work?
Click to expand...
Click to collapse
Is it possible you flashed the 4.3 bootloader? Perhaps something in the modem file is preventing the phone from debrick in with the older file? Here is a debrick for the SGH - I747M from 4.3 courtesy of - Mr. X- I mirrored it with permission. https://www.dropbox.com/s/4n2b6l32iv9udow/debrick-SGH-I747M-UEMK5.img perhaps it might do what you need it to? Although I shall not be responsible if you actually need a Jtag after that when it could possibly have been recovered with the debrick files?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
---------- Post added at 11:47 PM ---------- Previous post was at 11:36 PM ----------
I suppose it is possible that you have a bad debrick file? Bad downloads happen all the time.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

help me please
I have a problem ...
CM want to install 10.2 on my samsung galaxy s3 sgh i747m but can not find any rom or tutorial for phone CM.10.2 decided install that of ATT but it is a mistake to frame this
assert failed: GetProp ("ro.product.device") == d2att "\ GetProp (" ro.build.product ") == 'd2att" E: error in / emmc/0/cm-10.2-20131125-NIGHT-d2att
(State 7)
installation aborted
I have CWM Recovery v5.5.0.4
I need help

theramsey3 said:
I
Is it possible you flashed the 4.3 bootloader? Perhaps something in the modem file is preventing the phone from debrick in with the older file? Here is a debrick for the SGH - I747M from 4.3 courtesy of - Mr. X- I mirrored it with permission. *link removed* perhaps it might do what you need it to? Although I shall not be responsible if you actually need a Jtag after that when it could possibly have been recovered with the debrick files?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
---------- Post added at 11:47 PM ---------- Previous post was at 11:36 PM ----------
I suppose it is possible that you have a bad debrick file? Bad downloads happen all the time.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Okay, so I was in disk management to format the SD card so I could start fresh and the imagine file you linked, but I noticed like 14 partitions on it (That werent there before I should add).. I deleted them and went back to formatting, but left me with 29.26gb unallocated that I couldn't reformat.. I've only got 60mb on it now, and that's not even enough for the image
Any ideas what's going on?

Yumz said:
Okay, so I was in disk management to format the SD card to try the imagine file you linked, and I noticed like 14 partitions on it (That werent there before I should add).. I deleted them and went back to formatting, but left me with 29.26gb unallocated that I couldn't reformat.. I've only got 60mb on it now, and that's not even enough for the image
Any ideas what's going on?
Click to expand...
Click to collapse
GET a copy of mini partition wizard from here http://www.partitionwizard.com/free-partition-manager.html Delete all the partitions on it then try to flash the .IMG file again.
when you get ready to use it in the phone again delete all partitions the phone will recognize it as unformatted and prompt you to format it.
when you write The .IMG file it formats and partitions the card to mirror the phones internal sd card.

Same boat
Hey guys! This seems like quite a coincidence to me, but last night I was flashing a new ROM and now my phone is doing the exact same thing as YUMZ. So, I just wanted to say thanks (YUMZ for getting this thread started and theramsey3 for providing the help). I really hope you get this figured out. I was pretty sure after hours of trying to fix it last night that I'd need a new phone.
YUMZ, have you tried using odin3? In v1.83 (only v1.83) I get a yellow com signal from the phone, but when trying to use it, it always hangs at SetupConnection. I don't know if this helps any.

theramsey3 said:
GET a copy of mini partition wizard from here *link delete* Delete all the partitions on it then try to flash the .IMG file again.
when you get ready to use it in the phone again delete all partitions the phone will recognize it as unformatted and prompt you to format it.
when you write The .IMG file it formats and partitions the card to mirror the phones internal sd card.
Click to expand...
Click to collapse
Okay, thank you. I'll try this tonight
edit: So I followed all your instructions and used the img you provided, but still nothing
skippin07 said:
Hey guys! This seems like quite a coincidence to me, but last night I was flashing a new ROM and now my phone is doing the exact same thing as YUMZ. So, I just wanted to say thanks (YUMZ for getting this thread started and theramsey3 for providing the help). I really hope you get this figured out. I was pretty sure after hours of trying to fix it last night that I'd need a new phone.
YUMZ, have you tried using odin3? In v1.83 (only v1.83) I get a yellow com signal from the phone, but when trying to use it, it always hangs at SetupConnection. I don't know if this helps any.
Click to expand...
Click to collapse
I don't know if it's a good or a bad thing others are in the same boat as me But if this thread helps more people than me, and you than that's awesome.
I haven't tried doing that, I'll also do that tonight and post back if it does the same thing. Maybe if it does that'll have some significance that it can be fixed? Not sure
edit: I plugged it in with v1.83 open and it didn't recognize it. No yellow signal or anything

My phone is bricked?

Hello every one! so yesterday while doing nothing but leaving my phone on a markipilers youtube video, I see my screen go off I try to turn it back on and nothing happens. I tried power cycling and its still off, just not responding to anything, no sound no light no nothing. I tried then going to recovery mode but well... nothing happened. The only thing that actually makes any responses is when I connect it using a USB to my laptop, my laptop beeps, its not suposed to beep it is broken so is it bricked?
My device is a rooted Samsung galaxy s4 mini i19192 or so I hope it is.
I really hope that this is the right place to be redirected to assistant if not then Iam really sorry, thank you so much every one and have a fantastic day!
Edit: I forgot to mention two things.
1st: It does not seem to charge the battary, I kniw this because I have another identical one though the battary works fine in the working one
2nd: My PC reads it as (something?)_dload, Sadly I do not have acess to a computer just yet. Thanks again

Any help.. please?

Khaled125 said:
Hello every one! so yesterday while doing nothing but leaving my phone on a markipilers youtube video, I see my screen go off I try to turn it back on and nothing happens. I tried power cycling and its still off, just not responding to anything, no sound no light no nothing. I tried then going to recovery mode but well... nothing happened. The only thing that actually makes any responses is when I connect it using a USB to my laptop, my laptop beeps, its not suposed to beep it is broken so is it bricked?
My device is a rooted Samsung galaxy s4 mini i19192 or so I hope it is.
I really hope that this is the right place to be redirected to assistant if not then Iam really sorry, thank you so much every one and have a fantastic day!
Edit: I forgot to mention two things.
1st: It does not seem to charge the battary, I kniw this because I have another identical one though the battary works fine in the working one
2nd: My PC reads it as (something?)_dload, Sadly I do not have acess to a computer just yet. Thanks again
Click to expand...
Click to collapse
probably QHSUSB_DLOAD, which is a hard brick, you might be able to fix with a debrick image
Sent from my Galaxy S4 Mini using XDA Labs

its in fact qshusb_dload but iam still a bit clueless on the reason or which method to solve. I read its because the cpu is trying to boot from the sd card and has something to do with something called emmac that is terrible in the s4 so I read three methods to solve
1- Just your method
2- Cooling the emmc?
and three, this
http://cellphonetrackers.org/qhsusb_dload-fix-qualcomm-soc.html
so Iam a bit distracted on what to even do or how to do it, any help would be apriciated plus any further notices about how to even avoid the problem
and thank you so much @IronRoo for your noticable contributions to these stuff!

Khaled125 said:
its in fact qshusb_dload but iam still a bit clueless on the reason or which method to solve. I read its because the cpu is trying to boot from the sd card and has something to do with something called emmac that is terrible in the s4 so I read three methods to solve
1- Just your method
2- Cooling the emmc?
and three, this
http://cellphonetrackers.org/qhsusb_dload-fix-qualcomm-soc.html
so Iam a bit distracted on what to even do or how to do it, any help would be apriciated plus any further notices about how to even avoid the problem
and thank you so much @IronRoo for your noticable contributions to these stuff!
Click to expand...
Click to collapse
Yes, the eMMC is prone to fail/corruption on our phones, at least I think. The eMMC is the internal SD memory. Hopefully yours is just corrupt.
The cooling trick is probably only good if there is a bad soldier joint on the chip and will probably only work a few minutes as the board will heat up once turned on
I would try the debrick file as that's probably the easiest. See also Valenti's post on other Samsung device, as better write up on one (Samsung Mega maybe?) as well as by the others who originally come up with the debrick idea to get a better idea of what to do.
I guess (without researching) the method in your link is the same principle as the debrick file but may work even if debrick doesn't work as not dependant on having a matching file from phone with same bootloader (???? I don't know as haven't looked into that method)
Also you can send phone away for jtag if nothing else works
Sent from my Galaxy S4 Mini using XDA Labs

IronRoo said:
Yes, the eMMC is prone to fail/corruption on our phones, at least I think. The eMMC is the internal SD memory. Hopefully yours is just corrupt.
The cooling trick is probably only good if there is a bad soldier joint on the chip and will probably only work a few minutes as the board will heat up once turned on
I would try the debrick file as that's probably the easiest. See also Valenti's post on other Samsung device, as better write up on one (Samsung Mega maybe?) as well as by the others who originally come up with the debrick idea to get a better idea of what to do.
I guess (without researching) the method in your link is the same principle as the debrick file but may work even if debrick doesn't work as not dependant on having a matching file from phone with same bootloader (???? I don't know as haven't looked into that method)
Also you can send phone away for jtag if nothing else works
Click to expand...
Click to collapse
Thats great! thank you. however can you give me a link to download that file / tutorial as iam not sure google would help me in that. second off I have no idea where Valenti's post either so that would just be fantastic if you can, Thanks again for every thing!

Khaled125 said:
Thats great! thank you. however can you give me a link to download that file / tutorial as iam not sure google would help me in that. second off I have no idea where Valenti's post either so that would just be fantastic if you can, Thanks again for every thing!
Click to expand...
Click to collapse
There are some debrick files here for some of the S4 Mini models (some have broken links but some still work, or find others on internet. This is also one of the thread started by @ValenteL
http://forum.xda-developers.com/showthread.php?t=2625628&page=10
Sent from my Galaxy S4 Mini using XDA Labs

IronRoo said:
There are some debrick files here for some of the S4 Mini models (some have broken links but some still work, or find others on internet. This is also one of the thread started by @ValenteL
http://forum.xda-developers.com/showthread.php?t=2625628&page=10
Click to expand...
Click to collapse
Wanderful, Thank you! should I mark this as solved?

IronRoo said:
There are some debrick files here for some of the S4 Mini models (some have broken links but some still work, or find others on internet. This is also one of the thread started by @ValenteL
http://forum.xda-developers.com/showthread.php?t=2625628&page=10
Click to expand...
Click to collapse
I have been searching for ever and still zero luck on finding either a way through the s4 mini nor the actual debrick file... all I could find was for the s3 all over, any help?

Khaled125 said:
I have been searching for ever and still zero luck on finding either a way through the s4 mini nor the actual debrick file... all I could find was for the s3 all over, any help?
Click to expand...
Click to collapse
Did you try the two debrick images in my post dated the 22nd March in the thread I posted above?
Actually I also pulled one from my phone after I read you can generate one from Cyanogenmod phones that will also work, I will post that on the above thread also a bit later.
Sent from my Galaxy S4 Mini using XDA Labs

IronRoo said:
Did you try the two debrick images in my post dated the 22nd March in the thread I posted above?
Actually I also pulled one from my phone after I read you can generate one from Cyanogenmod phones that will also work, I will post that on the above thread also a bit later.
Click to expand...
Click to collapse
Just found it, Though if your link would have directed to page 8 rather than 10 that would have been fantastic! I thought You ment the main post which also helped me alot. How ever do I really have to downoad monster legands to be able to download the foking file?

oh never mind, Just a damn ad

IronRoo said:
Did you try the two debrick images in my post dated the 22nd March in the thread I posted above?
Actually I also pulled one from my phone after I read you can generate one from Cyanogenmod phones that will also work, I will post that on the above thread also a bit later.
Click to expand...
Click to collapse
Oh and how do you flash that thing to recovery, How do you pull that debrick file? is really confusing me

And please pardon me if my questions are spammy or annoying, There are a whole lot of steps through it and neither google nor the forum seem to be answering it so I might just consult you for that.
From what I understand, You flash the debrick file to the sd card using this 32 bit sd flasher thing and then it just works because the booting files are on the sd card but it will not boot without it. So how can you fix the corrupted boot loader AND how can I restore my sd card back to normal, I have seen a video for it but he is using ubuntu and command lines and stuff.

Khaled125 said:
Oh and how do you flash that thing to recovery, How do you pull that debrick file? is really confusing me
Click to expand...
Click to collapse
The original post by @ValenteL was a file to generate a debrick image, but you need a working phone to use that.
People with phones that are already bricked have to get a debrick file from someone else. This debrick image must be put onto an 16Gig (some report success with 32gig) SD card that is formatted (so you will lose everything else on it) and then the phone will boot with it instead of internal mmc to get your phone going (you have to keep the SD in) so you can then recover data and also hopefully flash a new rom later so you don't need to always boot from SD.
Sent from my Galaxy S4 Mini using XDA Labs

IronRoo said:
The original post by @ValenteL was a file to generate a debrick image, but you need a working phone to use that.
People with phones that are already bricked have to get a debrick file from someone else. This debrick image must be put onto an 16Gig (some report success with 32gig) SD card that is formatted (so you will lose everything else on it) and then the phone will boot with it instead of internal mmc to get your phone going (you have to keep the SD in) so you can then recover data and also hopefully flash a new rom later so you don't need to always boot from SD.
Click to expand...
Click to collapse
Yes, that was what I understood already but thank you anyway! My question was How? on both creating the debrick file and restoring both sd card (too make it work as a readable card rather than a booting device if it does not already) and fix the phones internal memory without actually reseting the whole phone and if there are no way else to fix internal memory... to back up the whole thing.
thank you!

IronRoo said:
Did you try the two debrick images in my post dated the 22nd March in the thread I posted above?
Actually I also pulled one from my phone after I read you can generate one from Cyanogenmod phones that will also work, I will post that on the above thread also a bit later.
Sent from my Galaxy S4 Mini using XDA Labs
Click to expand...
Click to collapse
WANDEFUL! My phone actually viperated and showed color!
however.. it gives this on a black screen.
boot recovery
check boot partitions
copy from t flash
boot recovery
write 139008
reboot
and obviously reboots, thoughts?

My last two posts are the most important now, if you or any one else can answer that would be fantastic!
some notes: after searching the thing does not mention emmc nor odin at all like for some others with the same issue... just this plain text.
I had upgraded my android version to 4.4.2 not 4.2.2 so I assume that is important, thanks again and please answer as soon as you can as that would be great! thank you for every thing @IronRoo

Khaled125 said:
My last two posts are the most important now, if you or any one else can answer that would be fantastic!
some notes: after searching the thing does not mention emmc nor odin at all like for some others with the same issue... just this plain text.
I had upgraded my android version to 4.4.2 not 4.2.2 so I assume that is important, thanks again and please answer as soon as you can as that would be great! thank you for every thing @IronRoo
Click to expand...
Click to collapse
I think the important thing is the bootloader (& pit must be the same) that if I recall was updated from the version you mention to ver 2. So you need a debrick with the ver 2 bootloader. (but I am not 100% sure about this, only read some stuff last year) My phone BL is ver 1
a guy on the below Mega thread with an I9195 did get a stop further by repeating multiple times
http://forum.xda-developers.com/showthread.php?t=2600976&page=4
But still didn't fix phone fully
read next few pages, one guy used freeze fix white partial success, might be useful if you want to get data off phone.
Also another link that may offer help
but probably your emmc is bad, is my guess
gotta go now, work calls
Sent from my Galaxy S4 Mini using XDA Labs

IronRoo said:
I think the important thing is the bootloader, that if I recall was updated from the version you mention to ver 2. So you need a debrick with the ver 2 bootloader. (but I am not 100% sure about this, only read some stuff last year) My phone BL is ver 1
a guy on the below Mega thread with an I9195 did get a stop further by repeating multiple times
http://forum.xda-developers.com/showthread.php?t=2600976&page=4
But still didn't fix phone fully
read next few pages, one guy used freeze fix white partial success, might be useful if you want to get data off phone.
Also another link that may offer help
but probably your emmc is bad, is my guess
gotta go now, work calls
Sent from my Galaxy S4 Mini using XDA Labs
Click to expand...
Click to collapse
Thats great! good luck at your work, when you are back though I need to tell you this
I have another device of the exact same model that is kikkat not rooted (kitkat will have bootloader version 2 right?) if only I knew how to get the file out and then do all the stuff again, ill keep searching since you are at work now, will keep you updated. please help about it though if you can*
so if someone say for example has android 5 on an s4 mini, he will never get his phone back to work unless some one made a debrick file for it? if the previous statments were true?
My questions are:
Extract that file from the other phone, if I managed to answer it ill tell you.
To get my SD card back to work and fix my emmc
Iam not giving up on my emmc yet though, iam sure there is a way to solve it, if not then how to fix that failed emmc?
thanks again!