Develop Bugs

Pretty Much Bricked (please Help!!!)

Hey guys. I really , really , really, (can't emphasize that enough), need your help. I flashed my Vogue about a week ago with the 19588 ROM using PPC Geeks Kitchen.
I ended up having to do a warranty exchange because my volume button came a little loose. Well, I went to Flash back to the Stock Alltel ROM, the one that is on the HTC site, thats linked on this page, the one I always use, and now I'm screwed.
It makes it to 43 percent and says theres a communication error. The really weird thing is, I can flash any other ROM to the phone, just not the Alltel ROM. Below , I've listed what I've tried, so you get an Idea. I'm beggin you to help me out here.
*I started out with CokeMan 2.31 , and the 19588 Cooked PPCGeeks Kitchen ROM.
*After the first 5 failed attempt to flash the Alltel ROM, I flashed CokeMan v0.41, and then flashed Mustangs Clean ROM w/o GPS. (this is when I figured out other ROM's will work)
*I re-downloaded the Alltel ROM from HTC's website 6 times, and have tried it on three separate computers and no luck.
*I tried almost ten different ROM's , and each time tried flashing the Alltel ROM afterwords.
*I extracted the Alltel ROM to a folder. Downloaded a blank RUU folder. Copied all of the files from the alltel folder to the RUU folder. (All of the files that were in the Alltel Folder, and not in the RUU folder.) It actually flashed all the way thru, but is now stuck at the HTC screen, and says NO RADIO at the bottom. I just stopped trying, and now am turning to the PPC Gods, you guys. SO PLEASE HELP ME OUT. I have to sent the thing back by monday, or they charge me.
I've always been able to flash to the Alltel ROM from and ROM i've ever used, and never had this trouble before in my PPC life. It always just relocks the phone.
PLEASE PLEASE PLEASE HELP!!!

flash using the sd card

Sounds like you've flashed the f*** out of that phone, suprised it didn't overheat ! Anyways, try the SD method. Also, what radios have you been adding on, or originated with on the ROM you had when you first started.
Also, I'll be quite honest, if I had to return the phone for any reason and couldn't flash back, I'd probably break it to pieces and say it was run over!

how to use SD anyone? please? ive never tried

does it really matter what ROM is on there ...if your having a button problem? You obviously didn't cause the issue because of the ROM.

faroreefer said:
does it really matter what ROM is on there ...if your having a button problem? You obviously didn't cause the issue because of the ROM.
Click to expand...
Click to collapse
Whoa! Never seen this before! If you change the ROM you completely void your warranty.

TweakMan said:
how to use SD anyone? please? ive never tried
Click to expand...
Click to collapse
1. Format your MicroSD card to FAT32 (YES - FAT 32 32 32!! not just plain old FAT) (again, this is not required if your card is already fat32; it is ok to have other data on the card). I have read that the card needs to be 2gb or smaller, though I'm not sure how much truth, if any, there is to that...
2. Extract the .NBH you desire to flash from the exe or zip or w/e put it on the microsd card rename it from RUU_signed.nbh to VOGUIMG.NBH
3.Put the MicroSD card in your phone and Get To the BOOTLOADER screen (camer+power+reset) it should then start updating with the .NBH on the SD card and the procedure should begin automatically.
quoted from here: http://forum.ppcgeeks.com/showthread.php?t=17473
and also, like the champ said, what radios have you flashed?
EDIT: and, which alltel rom are you trying to flash? if you were reverting back to a non-gps/lower radio rom, you did make sure to downgrade the spl properly using these instructions here correct?
* http://forum.ppcgeeks.com/showthread.php?t=24906
or here:
* http://forum.ppcgeeks.com/showthread.php?t=24979
good luck man!!

If you can't flash it, make sure to make it so it can't even start up... you need to completely brick it so it can't get to the bootloader, just not even turn on. Then you can blame HTC and get a new one

derekwilkinson said:
If you can't flash it, make sure to make it so it can't even start up... you need to completely brick it so it can't get to the bootloader, just not even turn on. Then you can blame HTC and get a new one
Click to expand...
Click to collapse
You can't be serious with this, right? The idea here is to fix it, not blame HTC, because I'm sure that would go over real smooth with the carrier.

TheChampJT said:
You can't be serious with this, right? The idea here is to fix it, not blame HTC, because I'm sure that would go over real smooth with the carrier.
Click to expand...
Click to collapse
lol agreed

What's the update?

If it's bricked and you have insurance, wrap your Touch in a damp cloth, put it in the microwave on high for 2 seconds, and voila!

piscesjoey said:
If it's bricked and you have insurance, wrap your Touch in a damp cloth, put it in the microwave on high for 2 seconds, and voila!
Click to expand...
Click to collapse
OH! Another one! After the voila, you call your carrier and say what exactly?

TheChampJT said:
OH! Another one! After the voila, you call your carrier and say what exactly?
Click to expand...
Click to collapse
You say it doesn't work anymore. From VZW, you get one in 1-2 days and you are done. Been there. Done that.

etexter said:
You say it doesn't work anymore. From VZW, you get one in 1-2 days and you are done. Been there. Done that.
Click to expand...
Click to collapse
Well that sounds like a horrible idea! Lol I mean if it has to be done then yeah just go to a GPS ROM and then flash back and it will brick and you can send it in if you have TEP from Sprint or something.. But first I think he wants to FIX the phone not destroy it and start over

My touch is also bricked. It boots to the Sprint logo and stops there.

What do you mean a button problem.
My Touch's green and red buttons stopped working before updating. But the phone still worked. After updating the ROM, even the phone stop working.
Could you please elaborate on this?
faroreefer said:
does it really matter what ROM is on there ...if your having a button problem? You obviously didn't cause the issue because of the ROM.
Click to expand...
Click to collapse

dongdongdog said:
What do you mean a button problem.
My Touch's green and red buttons stopped working before updating. But the phone still worked. After updating the ROM, even the phone stop working.
Could you please elaborate on this?
Click to expand...
Click to collapse
The first post dealt with a broken button.

major problem. Need some help. Loopbooting

So I'm at work and go to look at my phone and notice its rebooting which it never does. I watch it and notice its loopbooting at the white Evo screen. Ive never as much as had a random reboot before. I try to boot into recovery and can get to hboot but as soon as I try to select recovery it loop boots at the same point. I tried pulling the battery and that didn't help either. I'm running cm6.1 rc1 with stock kernel and no over or under clocking. I haven't made any changes in a while. Not even any new apps.
Any ideas?

I just went through and read every thread with loop in the title and it seems like with everyone else they had this issue while rooting or flashing or making some sort of change. Nor just on an idle phone

You may need to RUU your phone and start over if you arent able to get into any type of recovery mode...
Sent from my froyo using the xda app

I can get into hboot but that's about it

Just got home finally.. Gonna try to get this bs fixed. I wish I knew what caused it. I can't have this randomly happening again.

I was able to run RUU app and install the update from here;
http://forum.xda-developers.com/showthread.php?t=747319
It just finished and I'm still in a boot loop. Ugh.
I've been searching for hours now and I'm not finding much help

Ugh.. I'm giving up for the night. Been searching for hours and can't find anything that seems to work. And of course today is Thanksgiving and there's no chance of me even getting a new phone.

did you try a 3.29 ruu i'm surprised that sync let you flash a 3.26 if your phone updated to newer that might help also if you used unrevoked you need to flash thier s-on tool

Jbcarrera said:
did you try a 3.29 ruu i'm surprised that sync let you flash a 3.26 if your phone updated to newer that might help also if you used unrevoked you need to flash thier s-on tool
Click to expand...
Click to collapse
The only RUU I was able to flash with the RUU app was the 3.26 one I posted. I downloaded like 10 others and RUU app doesn't see them for some reason.
Also, how can I send a file to the phone with fastboot? I've searched and searched and I'm not sure of the exact syntax to use.
I had S-OFF and was fully rooted untill I ran RUU app.

Any other suggestions? I'm really trying to avoid getting a new phone.

Grabbed a card reader and adapter and trying some other RUU's I found now.. Hopefully something works.

thenags said:
Grabbed a card reader and adapter and trying some other RUU's I found now.. Hopefully something works.
Click to expand...
Click to collapse
i was going to suggest that but you beat me to it have been away all day

thenags said:
Any other suggestions? I'm really trying to avoid getting a new phone.
Click to expand...
Click to collapse
Jbcarrera said:
i was going to suggest that but you beat me to it have been away all day
Click to expand...
Click to collapse
Right now I'm just downloading another RUU to use with RUUApp. Do you have any other suggestions if this doesn't work?
Attempting the .exe found here;
http://forum.xda-developers.com/showthread.php?t=819771&highlight=mirror&page=3

thenags said:
Right now I'm just downloading another RUU to use with RUUApp. Do you have any other suggestions if this doesn't work?
Attempting the .exe found here;
http://forum.xda-developers.com/showthread.php?t=819771&highlight=mirror&page=3
Click to expand...
Click to collapse
Just finished installing that RUU and no change. Still the same boot loop.

Downloading the following RUU now and going to try again.
RUU_SuperSonic_S_Sprint_WWE_3.30.651.3_Radio_2.15.00.09.01_NV_1.77_003_release_157088_signed.exe
And for anyone looking for stock RUU's and having a hell of a time. Here's a good link I found with a bunch of them;
http://shipped-roms.com/shipped/Supersonic/

That one didn't work either.. Still just loop booting. Looks like this thing is just completely eff'd and I need a new one. Damn.

Well, just got home with a brand new phone. It's got hboot 2.20.. Time to get rooting. Ugh.

Just search for a pc3600.img file that is rooted and put on sd and boot to bootloader and flash
sent from my white w/ red trim Evo

krazydude4g said:
Just search for a pc3600.img file that is rooted and put on sd and boot to bootloader and flash
sent from my white w/ red trim Evo
Click to expand...
Click to collapse
I did that as well.. Nothing was working on that thing. Got a new phone now and just finished rooting it and getting it all set up.

Problem with free mytouch slide i got.

so a friend of mine basically gave me this mytouch and i have no idea whats wrong with it and how to fix it.
i have some pictures attached below.
it boots up, then when im on the lockscreen and slide down, i get a force close and the my touch logo....then it reboots its self.
please help.
thanks

dapoharoun said:
so a friend of mine basically gave me this mytouch and i have no idea whats wrong with it and how to fix it.
i have some pictures attached below.
it boots up, then when im on the lockscreen and slide down, i get a force close and the my touch logo....then it reboots its self.
please help.
thanks
Click to expand...
Click to collapse
This happened to me when I deleted some widgets that Sense was using, but I was getting an HTC Sense force close. Not this. Are you rooted? If you don't know, download clockworkmod recovery for the slide and put it on the root of your SD card as update.zip and flash it via recovery. (you get to recovery through the bootloader, selecting recovery with the volume down key, and the power key to select it), and if it gives you a signature verification failure, then you are not rooted. If it succeeds, then flash CR_Mod OTA 1.35.xxx (forgot the exact number, it's in the dev section), and that should fix your problem.

MusicMan374 said:
This happened to me when I deleted some widgets that Sense was using, but I was getting an HTC Sense force close. Not this. Are you rooted? If you don't know, download clockworkmod recovery for the slide and put it on the root of your SD card as update.zip and flash it via recovery. (you get to recovery through the bootloader, selecting recovery with the volume down key, and the power key to select it), and if it gives you a signature verification failure, then you are not rooted. If it succeeds, then flash CR_Mod OTA 1.35.xxx (forgot the exact number, it's in the dev section), and that should fix your problem.
Click to expand...
Click to collapse
thanks for the reply sir.
i am about to try that now, just have no clue where to download clockwork recovery from. is there a specific one for just the mytouch?
thanks

dapoharoun said:
thanks for the reply sir.
i am about to try that now, just have no clue where to download clockwork recovery from. is there a specific one for just the mytouch?
thanks
Click to expand...
Click to collapse
Yeah, I attached the file you need, seems the clockwork site is temporarily down.

MusicMan374 said:
Yeah, I attached the file you need, seems the clockwork site is temporarily down.
Click to expand...
Click to collapse
ok so im not rooted, because i got a verification error. picture attached below.
whats next sir?

dapoharoun said:
ok so im not rooted, because i got a verification error. picture attached below.
whats next sir?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=754020
Follow that guide to root your phone, and then flash this: http://forum.xda-developers.com/showthread.php?t=747002
That will give you rooted stock as well as re-update your radio, since rooting downgrades your radio image. Let me know how that all goes

MusicMan374 said:
http://forum.xda-developers.com/showthread.php?t=754020
Follow that guide to root your phone, and then flash this: http://forum.xda-developers.com/showthread.php?t=747002
That will give you rooted stock as well as re-update your radio, since rooting downgrades your radio image. Let me know how that all goes
Click to expand...
Click to collapse
will try, but is it possible to root the phone when it wont turn on?

Any body?
please

dapoharoun said:
will try, but is it possible to root the phone when it wont turn on?
Click to expand...
Click to collapse
No, not that I know of
Sent from my T-Mobile myTouch 3G Slide

so if this beautiful phone broken for good!?!?!?

bump.......

dapoharoun said:
ok so im not rooted, because i got a verification error. picture attached below.
whats next sir?
Click to expand...
Click to collapse
Try the wipe data/factory reset option

agentg1001 said:
Try the wipe data/factory reset option
Click to expand...
Click to collapse
tried that....no luck

Try downloading the original ESPRING and put it on root of SD card the. Update it by turning on the phone using volume down and power
Sent from my T-Mobile myTouch 3G Slide using XDA App

Actually I revise that. It should be possible. Your phone isn't totally screwed, it boots at least. Look through the guide, I can't at the moment, and see if it actually requires your phone to be booted. I think you can do all of it through hboot and recovery, using adb and ESPRIMG.zip. I really don't remember though, read the guide, try to root your phone.
Sent from my T-Mobile myTouch 3G Slide

MusicMan374 said:
Actually I revise that. It should be possible. Your phone isn't totally screwed, it boots at least. Look through the guide, I can't at the moment, and see if it actually requires your phone to be booted. I think you can do all of it through hboot and recovery, using adb and ESPRIMG.zip. I really don't remember though, read the guide, try to root your phone.
Sent from my T-Mobile myTouch 3G Slide
Click to expand...
Click to collapse
yeah ALMOST!!!!!!
i was going thru the steps well, but then adb wont recognize the phone in the command prompt becasue it is on "diskdrive" not "chargeonly"....witch i cant change. if only i could change it

purple1 said:
Try downloading the original ESPRING and put it on root of SD card the. Update it by turning on the phone using volume down and power
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
ESPRIMG.zip... Why does everyone think it's ESPRING?
dapoharoun said:
yeah ALMOST!!!!!!
i was going thru the steps well, but then adb wont recognize the phone in the command prompt becasue it is on "diskdrive" not "chargeonly"....witch i cant change. if only i could change it
Click to expand...
Click to collapse
You can use ADB while in recovery mode, try doing the commands in recovery mode, using clockwork recovery. Although that may not work because it requires toggling wifi. See if you can find and try other rooting methods? There a few different ones out there. Your phone boots into the OS.
I googled around, found that account syncs were causing com.htc.bg to crash. I also noticed that your phone was booting without a sim card in it? Might be a stupid question, but you HAVE tried booting it WITH a sim card right? I also noticed that your hboot date is march 23rd, almost a year ago..?

http://forum.xda-developers.com/showthread.php?t=746577
Do that. Will completely restore your phone.

migueltherocker said:
http://forum.xda-developers.com/showthread.php?t=746577
Do that. Will completely restore your phone.
Click to expand...
Click to collapse
thanks...i tried that but i got and error...pic below

dapoharoun said:
thanks...i tried that but i got and error...pic below
Click to expand...
Click to collapse
That's odd, never seen that one before. My only suggestion would be to try and re-download the zip file, see if it was just a bad download. Otherwise I've got nothing.

Semi-bricked Incredible?

So I flashed Skyraider tonight, wiped data, installed the ROM, and booted up the phone. I was halfway through setting up my Google account when the phone froze and rebooted. Except, it didn't boot back up. It did the "vibrate five times and flash the LED" thing. Didn't think it was a big deal, so I pulled the battery, tried to boot it back up. But it does the same thing.
I can get into the hboot menu, and if the phone is plugged into the computer, it'll boot up into Skyraider, but it can't read the SD card or the internal storage. So, essentially, a pretty screwy phone. I also cannot boot back into recovery. It just does the vibrating thing when I try. My computer doesn't detect the SD card or storage, either. (The SD card is fine, though. I put it in another phone and everything is still there.)
I have no idea what happened with it. I don't know if this is some random hardware damage, or if I should find an RUU and try to fix it or what.
I've had the worst luck with phones these past few weeks.
Any suggestions?

What version of CM Recovery do you have?
I would go back to stock and redo everything again. Download this file
http://www.fourty.net/~berzerker/stockstuff/PB31IMG_3.26.605.1_RUU.zip
Rename it PB31IMG.zip and put it on the root of your SD card, boot into the bootloader and let the update run its course. This will bring you back to a completely stock 2.2. From there you can re-root and do as you please.

I was on CW 2.5.1.2. But everytime I try to get into the recovery, the phone just vibrates five times and the LED flashes green. I'm also not sure that hboot is seeing my SD card. I'm going to try it, though.

Here is the RUU if you need it
http://shipped-roms.com/index.php?category=android&model=Incredible
The bottom one on that page is the Stock 2.2 build.

g00s3y said:
Here is the RUU if you need it
http://shipped-roms.com/index.php?category=android&model=Incredible
The bottom one on that page is the Stock 2.2 build.
Click to expand...
Click to collapse
I appreciate it, but hboot isn't recognizing the SD card.
I'm really thinking there's some hardware damage.

godsmacked4653 said:
I appreciate it, but hboot isn't recognizing the SD card.
I'm really thinking there's some hardware damage.
Click to expand...
Click to collapse
I'm not sure if it works, but can you boot into hboot and run the RUU from there and update. I don't think you need to have a working SD Card in order to do that, but I could be wrong. At least then it will be stock and no worries if you take it to verizon.

g00s3y said:
I'm not sure if it works, but can you boot into hboot and run the RUU from there and update. I don't think you need to have a working SD Card in order to do that, but I could be wrong. At least then it will be stock and no worries if you take it to verizon.
Click to expand...
Click to collapse
Do you mean running the Windows RUU? I tried that last night, but it could never find the device. ADB recognizes it, though, so idk what the problem was.

godsmacked4653 said:
Do you mean running the Windows RUU? I tried that last night, but it could never find the device. ADB recognizes it, though, so idk what the problem was.
Click to expand...
Click to collapse
If you have the unrevoked USB drivers installed I believe that is what causes it. You have to have the "stock" drivers for the phone installed on the PC for it to work, that was a problem I was having when trying to run the RUU.

g00s3y said:
If you have the unrevoked USB drivers installed I believe that is what causes it. You have to have the "stock" drivers for the phone installed on the PC for it to work, that was a problem I was having when trying to run the RUU.
Click to expand...
Click to collapse
I do have the stock drivers. I used unrevoked on Linux, and I've tried the RUU in Windows. But still no go.
I'm probably just going to take it up to Verizon today. If it can't boot, they really can't see that I've changed anything, right?

very true, good luck

g00s3y said:
very true, good luck
Click to expand...
Click to collapse
yes, good luck let us know ho it goes....

Kent_Davis said:
yes, good luck let us know ho it goes....
Click to expand...
Click to collapse
The sales rep looked at it for two minutes, and they're overnighting another Incredible to me.
So on one hand, I'm pretty happy about how easy it was.
On the other hand, I'd rather keep the AMOLED screen.
Does anybody know if I'm going to get a refurb, or will I get a new SLCD model?

If you had AMOLED first and they give you an SLCD, you can ***** at them and they have to give you an AMOLED one. Cuz that's what you payed for.
Sent from my ADR6300 using XDA App

dpwhitty11 said:
If you had AMOLED first and they give you an SLCD, you can ***** at them and they have to give you an AMOLED one. Cuz that's what you payed for.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
^ that. I just had to have a new one sent to me, its coming today. When I called tech support I asked them about what one I would be getting. They said that because I bought an AMOLED, I would be getting an AMOLED replacement.

g00s3y said:
^ that. I just had to have a new one sent to me, its coming today. When I called tech support I asked them about what one I would be getting. They said that because I bought an AMOLED, I would be getting an AMOLED replacement.
Click to expand...
Click to collapse
Yep. I got my replacement today. It's an AMOLED. As far as I can tell, all the hardware is working like it should.
This is probably the easiest time I have EVER had with Verizon.
But for future reference, five vibrations + blinking green LED = replacement.

I had same problem yesterday, five vibr.+ green blinks, but I had access into bootloader. I decided to reflash stock rom. Finally fixed problem
Sent from my ADR6300 using XDA Premium App

[Q] Bricked with out custon rom??

So I think my phone is hard bricked. I was on G+ ealier today, clicked on a link that opened Chrome. got through a third of the web page and my phone freezes then the screen goes black... I have tried every troubleshoot trick provided by tmobile and samsung and the phone wont respond in any way. Just a black screen. Is it possible to brick your phone with out trying to flash a custom ROM??? The only thing new I have done in the past week was install "graph ti89" and "aviate." I dont know if this has anything to do with it but tmobile has being try to get me to install the kitkat OTA for the last week and I keep ignoring it.

just update
jcampana28 said:
So I think my phone is hard bricked. I was on G+ ealier today, clicked on a link that opened Chrome. got through a third of the web page and my phone freezes then the screen goes black... I have tried every troubleshoot trick provided by tmobile and samsung and the phone wont respond in any way. Just a black screen. Is it possible to brick your phone with out trying to flash a custom ROM??? The only thing new I have done in the past week was install "graph ti89" and "aviate." I dont know if this has anything to do with it but tmobile has being try to get me to install the kitkat OTA for the last week and I keep ignoring it.
Click to expand...
Click to collapse
Hi,
Do the update or factory reset your phone. You can always use KIES also.
Ms. K

Ms. K said:
Hi,
Do the update or factory reset your phone. You can always use KIES also.
Ms. K
Click to expand...
Click to collapse
Thanks for your input but the phone won't turn on at all. Can'T turn it on to update. Won't go into safe mode by pressing vol. up&home&power. When I plug it into the computer it says it needs drivers for "QHSUSB_BULK." Kies doesn't see it as a connected device...

If you haven't done anything to the phone why not call Tmobile and get a replacement..
Sent from my bad ass Kryon infused Note 3

deeznutz1977 said:
If you haven't done anything to the phone why not call Tmobile and get a replacement..
Sent from my bad ass Kryon infused Note 3
Click to expand...
Click to collapse
because i'd like to recover the data that is on the phone.

jcampana28 said:
because i'd like to recover the data that is on the phone.
Click to expand...
Click to collapse
A few threads down you would have found this... http://forum.xda-developers.com/showthread.php?p=47555043
My recovery image is here: http://www.mediafire.com/view/?6nu61z43y51v3k4
You need a 32 GB sd card and some luck. Also reading is a requirement.
Yours may be a special case though, as you claim nothing was going on besides you clicked a link. Should have absolutely nothing to do with ota, and everyone else who had done this was messing with their phone. This definitely works for 4.3, but no one had reported working on 4.4 (you were on 4.3 anyways). Good luck.
Sent from my SM-G900T using Tapatalk

noobtoob said:
A few threads down you would have found this... http://forum.xda-developers.com/showthread.php?p=47555043
My recovery image is here: http://www.mediafire.com/view/?6nu61z43y51v3k4
You need a 32 GB sd card and some luck. Also reading is a requirement.
Yours may be a special case though, as you claim nothing was going on besides you clicked a link. Should have absolutely nothing to do with ota, and everyone else who had done this was messing with their phone. This definitely works for 4.3, but no one had reported working on 4.4 (you were on 4.3 anyways). Good luck.
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Mr Noobtoob, has anyone reported un-bricking a N900t running 4.4.2 (1st release, believe it ends in N94 or similar, NOT NE6)?
If so, did they do anything different?
Be well.

golfcartguy said:
Mr Noobtoob, has anyone reported un-bricking a N900t running 4.4.2 (1st release, believe it ends in N94 or similar, NOT NE6)?
If so, did they do anything different?
Be well.
Click to expand...
Click to collapse
I have not seen a successful report back of the nb4 firmware. Doesn't mean it doesn't work, just don't have confirmation.
Fusionized tweaking tapatalker here...

Thanks for the quick response!
Going to try, and will report back.
To clarify, it must be a Class 10 microsd card, and must be the same size (32gb), 1st formatted to exfat, correct?
Sent using XDA Free mobile app

golfcartguy said:
To clarify, it must be a Class 10 microsd card, and must be the same size (32gb), 1st formatted to exfat, correct?
Click to expand...
Click to collapse
Those are the magic ingredients!
Frank

Frank Westlake said:
Those are the magic ingredients!
Frank
Click to expand...
Click to collapse
Got it! So, to be clear;
1st - Format class 10 card to Exfat file system or structure
2nd - Using Win32Diskmapper, just point to the file (in my case kk900tunbrick image) and write to card. *Nothing special, should I verify Md5 sum, or just leave it as default settings?
3rd, Proceed to attempt to Unbrick (Battery at 100%, Put Sd card in slot, Then Add Battery, Connect cable - some say, some say doesn't matter, to computer, then attempt to boot with button sequence to download mode, or may boot by itself?)
Also, if the 1st image I downloaded does not work, can I reformat or wipe the sd card and start again with the other file (I believe a Pit file??)