Getting BLUE SCREEN after flashing some ROMS
currently i am on CARBON-CR-6.1-NOCT-UNOFFICIAL-z2_plus-20180913-0919.zip
some time before all roms are working but now when i try to change i am ending up a blue screen which goes on boot and boot
i tried flashing stock rom using qpst and then flash other some roms but i ended up same problem
had this issue mostly with pie roms(pixysos and bootleggers)
but not having this problem with havoc os(pie) (Havoc-OS-v2.0-20180914-z2_plus-Unofficial) & Deodexed-Oreo-Stock-Rom-Zuk-Z2-Plus-4.0.233-ST (porting from ZUK Z2 PRO)
please help me
i found out that i need to update firmware
which zui i had to flash through qfil and links please
vikkiklv said:
Getting BLUE SCREEN after flashing some ROMS
currently i am on CARBON-CR-6.1-NOCT-UNOFFICIAL-z2_plus-20180913-0919.zip
some time before all roms are working but now when i try to change i am ending up a blue screen which goes on boot and boot
i tried flashing stock rom using qpst and then flash other some roms but i ended up same problem
had this issue mostly with pie roms(pixysos and bootleggers)
but not having this problem with havoc os(pie) (Havoc-OS-v2.0-20180914-z2_plus-Unofficial) & Deodexed-Oreo-Stock-Rom-Zuk-Z2-Plus-4.0.233-ST (porting from ZUK Z2 PRO)
please help me
i found out that i need to update firmware
which zui i had to flash through qfil and links please
Click to expand...
Click to collapse
I guess that you cannot resolve the "blue-screen issue" without the QFIL method, which is required if the boot-loader of your device is too old, as it was mine.
I have already briefly reported how I did, but I will try to do it again in a more detailed form.
You need a Windows PC and Qualcomm QPST, read this carefully: https://zukfans.eu/community/threads/howto-flash-a-stock-zui-rom-zuk-z2-z2131-only.104/
You need a ZUI QPST archive above version 3.1 as reccomended by the OP, I used this: ZUI 3.5.389 [url]https://drive.google.com/open?id=1xWGFtcMZhMeOAsmASj4fwJzzbHOZZwdj[/URL]
I failed to use the method 1: using the command "adb reboot edl" (my device was just shutting-down and never enter into EDL mode as requested by QFIL.
I used successfully the method 2: using Volume+ and Power buttons:
1. disconnect USB cable and turn the phone completely off
2. press volume-up, and keep it pressed until further notice
3. press power button, keep it pressed for about 1/2 a second (yeah, that timing thing...)
4. insert usb cable (both volume-up and power still pressed at this point)
5. wait for short vibration - you should also see the ZUK logo flash on screen for a split second
6. now you can release both power and volume-up, you should already see the USB device coming up on PC
If anything different happens, just disconnect, power-off and start again... Have fun!
When you finish the flashing of the ZUI QPST ROM, you should reboot and set the 4G to extended capabilities, in case you have VoLTE on your area.
Then you need to verify if your boot-loader is still unlocked (as mine was) in case it being locked you must proceed to unlock it again as you did the first time.
Then you have to flash the recovery.img (I used TWRP).
Finally you have to flash the TWRP with Treble support (z2_plus_treble-TWRP-3.2.2_kubersharma_v2.img) and factory_to_vendor.zip (factory2vendor_z2_plus.zip).
If all the above end up correctly, you can proceed to flashing AEX 6.0 official and Gapps*
* Note: I used older version of nano Gapps arm64 android 9 (open_gapps-arm64-9.0-nano-20181009.zip) because the newer release was not allowing to restore my Google backup.
Hope you could get some help with my description!
Regards,
Credits - @mcalistri
Flash new firmware zip
Thanks!!!! Only method worked for me.
My baseband is 1.70 And the only thing that was installed on it was zui 2.5 indian, which I then switched to custom customs roms. So I can install a 4.4 kernel rom?
Zukker Fs! said:
My baseband is 1.70 And the only thing that was installed on it was zui 2.5 indian, which I then switched to custom customs roms. So I can install a 4.4 kernel rom?
Click to expand...
Click to collapse
Try it
if blue screen appears then flash the firmware zip
You don't have to take a risk of getting BL locked nethier waste your time flashing Qfil. In order to avoid it, use this guide
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/zuk-z2-baseband-flashing-guide-t3715121
satyen_ said:
Try it
if blue screen appears then flash the firmware zip
Click to expand...
Click to collapse
How I can do it?
Which firmware.zip I must flash?
Thanks in advance!
Inviato dal mio Z2 Plus utilizzando Tapatalk
sandruman said:
How I can do it?
Which firmware.zip I must flash?
Thanks in advance!
Inviato dal mio Z2 Plus utilizzando Tapatalk
Click to expand...
Click to collapse
See the op
https://forum.xda-developers.com/le...oreo-firmwarebaseband-twrp-flashable-t3776254
I've flashed this FIRMWARE_BASEBAND_ZUI3.5.337_Z2PLUS_TWRP.zip, but blue screen problem is always here.
Inviato dal mio Z2 Plus utilizzando Tapatalk
With qfil I've solved. Now I've a 4.4 kernel ROM.
sandruman said:
I've flashed this FIRMWARE_BASEBAND_ZUI3.5.337_Z2PLUS_TWRP.zip, but blue screen problem is always here.
Inviato dal mio Z2 Plus utilizzando Tapatalk
With qfil I've solved. Now I've a 4.4 kernel ROM.
Click to expand...
Click to collapse
How to solve through qfil because I have blue screen issue and need kernel 4.4
You must flash firmware 3.5xx whith qfil
Inviato dal mio Z2 Plus utilizzando Tapatalk
pawankerdwal said:
How to solve through qfil because I have blue screen issue and need kernel 4.4
Click to expand...
Click to collapse
Qfil 1.9 zui then update it to 3.5 via updater in rom
Related
After much suffering this was the only release that corrected the freezes, restarts and the camera after unlocking the bootloader.
Instructions
Download and install the latest Intel Android Device USB Drivers from HERE
Dowload the zip from HERE
Post your Zenfone in fastboot mode
Run the .bat
-------------------------------------------This tool works for all custom roms-------------------------------------------
OBS: This first version only unlock the bootloader, the next I add the flash TWRP recovery in the bat and other bat to lock the bootloader
Can i know someone here who is having the No camera problem,have u tried this ?
By the way,is this method unlock bootloader without No camera problem?
Lokcies said:
Can i know someone here who is having the No camera problem,have u tried this ?
By the way,is this method unlock bootloader without No camera problem?
Click to expand...
Click to collapse
I had this problem and this method worked
awesome, I'll try it
XHook said:
I had this problem and this method worked
Click to expand...
Click to collapse
Bro i am realy excited to hear that,but i don't have the access to download the file,can u please confirm my email ?
wanhasniza******@gmail.com
Lokcies said:
Bro i am realy excited to hear that,but i don't have the access to download the file,can u please confirm my email ?
wanhasniza******@gmail.com
Click to expand...
Click to collapse
updated link, sorry for the mistake
I use the STOCK ROM 0.78 ww
I'm with the unlock bootloader problem even in rom stock.
I lock bootloader again, and then use that?
It only works if you use custom rom? Or also in stock?
Sorry my bad English, I am Brazilian.
Zenfone 5 a501cg - 1.6 Ghz
Victor Soares said:
I use the STOCK ROM 0.78 ww
I'm with the unlock bootloader problem even in rom stock.
I lock bootloader again, and then use that?
It only works if you use custom rom? Or also in stock?
Sorry my bad English, I am Brazilian.
Zenfone 5 a501cg - 1.6 Ghz
Click to expand...
Click to collapse
The bat file it blocks before unlocking is only put in fastboot and run the file without fear.
:laugh:
May i know,if.bin and dnx version u use for this UBL Tools?
Sent from my ASUS_T00J using Tapatalk
XHook said:
The bat file it blocks before unlocking is only put in fastboot and run the file without fear.
:laugh:
Click to expand...
Click to collapse
tried this method but my camera is still doesnt work...how do i get my camera back
still freezing
XHook said:
After much suffering this was the only release that corrected the freezes, restarts and the camera after unlocking the bootloader.
Instructions
Download and install the latest Intel Android Device USB Drivers from HERE
Dowload the zip from HERE
Post your Zenfone in fastboot mode
Run the .bat
-------------------------------------------This tool works for all custom roms-------------------------------------------
OBS: This first version only unlock the bootloader, the next I add the flash TWRP recovery in the bat and other bat to lock the bootloader
Click to expand...
Click to collapse
no working for me, plz fix error
Victor Soares said:
still freezing
Click to expand...
Click to collapse
Same here...
XHook said:
After much suffering this was the only release that corrected the freezes, restarts and the camera after unlocking the bootloader.
Instructions
Download and install the latest Intel Android Device USB Drivers from HERE
Dowload the zip from HERE
Post your Zenfone in fastboot mode
Run the .bat
-------------------------------------------This tool works for all custom roms-------------------------------------------
OBS: This first version only unlock the bootloader, the next I add the flash TWRP recovery in the bat and other bat to lock the bootloader
Click to expand...
Click to collapse
After I used it with Lollipop droidboot ww t00j stock .78 I had problems with camera. It works only with kitkat?
@ XHook
have you worked on method to re-lock bootloader..
bricked my bootloader
After flashing this I couldn't access my fastboot. Now I can't even boot to system. I'm stuck at the USB logo, where usually I could reboot to fastboot (via pressing Power & Vol +) to fix this. But now I can't even access fastboot. When I press Power & Volume Up, it shows a battery icon. Please do help @XHook.
Editted:
Sorry for panicking back there. I forgot the reboot to recovery way using Power & Volume down. At least I can still boot to my system. I'll try to find a DIY solution for this. Sorry for panicking, @XHook.
Your tool uses Fastboot of 4.3 version right? Is that the difference?
no more update? camera not found, can this method by xhook solve the problem?
i've tried this version, but make my bootloader missing/bricked, same with ezrawk post
Note : When I installed this version >> 3.24.40.87 latest stock lollipop firmware
@XHook, tell me what your firmware version when you install this UBL method.
Thanks
ezrawk said:
After flashing this I couldn't access my fastboot. Now I can't even boot to system. I'm stuck at the USB logo, where usually I could reboot to fastboot (via pressing Power & Vol +) to fix this. But now I can't even access fastboot. When I press Power & Volume Up, it shows a battery icon. Please do help @XHook.
Editted:
Sorry for panicking back there. I forgot the reboot to recovery way using Power & Volume down. At least I can still boot to my system. I'll try to find a DIY solution for this. Sorry for panicking, @XHook.
Click to expand...
Click to collapse
I have the same problem. How did you fix it?
serihan said:
I have the same problem. How did you fix it?
Click to expand...
Click to collapse
I was using a custom recovery (TWRP) at that time so I flashed a fastboot via install. If you aren't using a custom recovery, you'd probably want to check this out: Zenfone 5 A500CG, Zenfone 6 A600CG Last chance to debrick (This fix youre IMEI) by swiczak
About the flashable fastboot, try searching for it in the Help & Troubleshooting part, I think the user who upload the flashable fastboot zip was tank0412. Try PM-ing him. Sorry can't help you about this 'cause I forgot where I saved mine.
Goodluck!
Hello! I tried to root my phone with the 13.0 and finally my phone boot only in the downloading mode. I cant go to the recovery mode and it cant boot normally. My pc recognize the phone same for odin. What can i do? This is my first attempt and it didnt went good. Have i damaged it? Thank you in advance.
Ras1992 said:
Hello! I tried to root my phone with the 13.0 and finally my phone boot only in the downloading mode. I cant go to the recovery mode and it cant boot normally. My pc recognize the phone same for odin. What can i do? This is my first attempt and it didnt went good. Have i damaged it? Thank you in advance.
Click to expand...
Click to collapse
Flash stock firmware.
When you have rooted your phone after installation have you removed the battery or turned off the phone?
Inviato dal mio GT-I9195 utilizzando Tapatalk
DarkJoker360 said:
Flash stock firmware.
When you have rooted your phone after installation have you removed the battery or turned off the phone?
Inviato dal mio GT-I9195 utilizzando Tapatalk
Click to expand...
Click to collapse
I tried to add the twrp recovery so i can root it with the 13.0 cyanogemod but it didnt went well. Now my phone boots only in downloading mode. Can u provide a link or guide please? Thanks
Ras1992 said:
I tried to add the twrp recovery so i can root it with the 13.0 cyanogemod but it didnt went well. Now my phone boots only in downloading mode. Can u provide a link or guide please? Thanks
Click to expand...
Click to collapse
Open odin
Download and unzip the firmware
Put it on AP button
Flash it
Firmwares(4.2.2 don' t work)
http://www.androidgalaxys.net/aggiornamento-galaxy-s4-mini-i9195/
Inviato dal mio GT-I9195 utilizzando Tapatalk
do you resolve problem?
Edit: Problem has been solved based on instructions provided here.
Long story short I had problems with the newest Cyanogenmod 14 nightly today and had to Factory Reset my phone. Since then I have spent hours installing different ROM's and have been unable to get any to work. They all install just fine, no errors. However I cannot boot into the OS at all. Every time I try to I am automatically booted into TWRP. I don't understand why this is happening after I have repeatedly wiped my entire phone. There is literally nothing on it, I install from scratch, restart... and am booted right back into recovery mode :crying:
Any help is greatly appreciated. I have a reddit thread going on right now as well regarding my problems earlier today but haven't gotten any help.
TWRP Version 3.0.2
Various ROM's I have tried:
cm-13.0-20160820-SNAPSHOT-ZNH5YAO0J9-Z00T.zip
cm-14.1-20161202-NIGHTLY-Z00T.zip
cm-14.1-20161201-NIGHTLY-Z00T.zip
hmm.. try to reboot into bootloader either from recovery or with help of volume plus power button. then flash ifwi, boot, droidboot, recovery and dnx, then install firmware again. if no luck with that. then you have to flash raw firmware using commands
sukhwant717 said:
hmm.. try to reboot into bootloader either from recovery or with help of volume plus power button. then flash ifwi, boot, droidboot, recovery and dnx, then install firmware again. if no luck with that. then you have to flash raw firmware using commands
Click to expand...
Click to collapse
Thank you for the reply!
Rebooting into either bootloader or with the button commands always brings me into TWRP. Nothing else appears to be possible.
Is there another way I can flash what I need? I am not familiar with flashing firmware and am not sure what ifwi droidboot etc. mean, is there a guide you could point me to for this?
Thanks!
Ocman76 said:
Thank you for the reply!
Rebooting into either bootloader or with the button commands always brings me into TWRP. Nothing else appears to be possible.
Is there another way I can flash what I need? I am not familiar with flashing firmware and am not sure what ifwi droidboot etc. mean, is there a guide you could point me to for this?
Thanks!
Click to expand...
Click to collapse
See if this helps
http://forum.xda-developers.com/zenfone2/help/stuck-recovery-flashing-rom-boot-t3499441
timbernot said:
See if this helps
http://forum.xda-developers.com/zenfone2/help/stuck-recovery-flashing-rom-boot-t3499441
Click to expand...
Click to collapse
Holy **** it worked!!! Thanks so much man!!!
If you were on cm14 then you are on an mm based bootloader. You can only install roms based on that. All of the lp bootloader based roms will do exactly what you described. The other alternative is to downgrade the bootloader to lp.
Sent from my Zenfone 2 using Tapatalk
kenbo111 said:
If you were on cm14 then you are on an mm based bootloader. You can only install roms based on that. All of the lp bootloader based roms will do exactly what you described. The other alternative is to downgrade the bootloader to lp.
Sent from my Zenfone 2 using Tapatalk
Click to expand...
Click to collapse
Thank you for the reply but I have already solved my issue. Is there a way to close the thread?
kenbo111 said:
If you were on cm14 then you are on an mm based bootloader. You can only install roms based on that. All of the lp bootloader based roms will do exactly what you described. The other alternative is to downgrade the bootloader to lp.
Sent from my Zenfone 2 using Tapatalk
Click to expand...
Click to collapse
There is or at least was a bug in CM 14.1 within settings , if did a factory reset within settings ...whether it still there today with latest build ? I've not tested
What it does or did, is render your twrp ineffective , you cannot flash or restore.
Above solution fixed or fixes it fast and you can then restore or install cm14.1
Ocman76 said:
Thank you for the reply but I have already solved my issue. Is there a way to close the thread?
Click to expand...
Click to collapse
What was the solution? Just edit the title and put in [SOLVED]
Sent from my Zenfone 2 using Tapatalk
Being the decent guy I am
Later today I will test factory reset within settings of CM14.1
to see if bugs still there , as it's early hrs here in UK .
Anyone still up care to test ???
kenbo111 said:
What was the solution? Just edit the title and put in [SOLVED]
Sent from my Zenfone 2 using Tapatalk
Click to expand...
Click to collapse
Thanks for the tip, edited the post title. I added my solution in the first line of my post as well.
Hi
I updated to MM Bootloader in order to flash updates to latest beanstalk 6.0, I then flashed the latest Beanstalk but I started to have strange problems on the lockscreen and status bar not operating, so I restored LP bootloader and twrp and restored the TWRP backup I made before the update but after reboot I get no SIM. I then tried to install other N roms and they are working but after trying one I decided to go back to MM because N drains battery too much, but then I figured I can no longer flash MM roms as I get Error : 7 in twrp.
Any idea how to go back to normal or at least get MM roms working?
Maybe this will help: http://forum.xda-developers.com/zenfone2/general/guide-how-to-update-to-official-mm-t3452082
are you suggesting to revert back to stock?
Yes, because if the phone doesn't detect both sim slots, you'll have to look for another solution.
it actually works with N, the problem is only when restoring the backup and flashing MM roms
Lots of people confused about M bootloader.
MM custom roms are mainly LP based.
You have actual M based bootloader version which N is based.
You can only flash N based custom roms now, and restore them with 3.0.2M TWRP
Old M back ups , need 3.0.2.0 TWRP and LP bootloader
I point to this for an example , 3rd case in 2 days
http://forum.xda-developers.com/zen...ia-sd-card-t3520642/post70268019#post70268019
But I did downgrade to lp bootloader and 3.0.2.0 twrp before flashing the old rom build or trying the restore. I just don't understand why I loose sim. Does it matter if I was using octodex kernel in the backup I'm trying to restore?
Inviato dal mio SHIELD Tablet K1 utilizzando Tapatalk
gohanSS said:
But I did downgrade to lp bootloader and 3.0.2.0 twrp before flashing the old rom build or trying the restore. I just don't understand why I loose sim. Does it matter if I was using octodex kernel in the backup I'm trying to restore?
Inviato dal mio SHIELD Tablet K1 utilizzando Tapatalk
Click to expand...
Click to collapse
There are numerous scenarios why you back ups might not restore , the twrp that you used at the time may have had a bug which if I remember rightly , mine did the same ..I think there were 2 out of 3 twrp 3.0.2.0 that were iffy .
Then , bootloader unlock too , I think I unlocked with sorgs with .13 and .20 LP but later wouldn't work on mine when in .184 or upwards .. but 1 year passed so ASUS unlock app was used .
Remember when you downgrade to 5 , your bootloader is locked again
I didn't know it gets locked when downgrading, but the restore works and besides the sim problem I didn't have any issues
Inviato dal mio SHIELD Tablet K1 utilizzando Tapatalk
And now you know
You will be able to flash MM roms again .
That was your original problem
<content deleted>
<content deleted>
Thank you for your time! I will give it a try
THanks man you rocking
oh yes! finally it is out! flashing it now!
Saw some bullying against you but glad this came out well. I will be testing soon. Just wanted to understand if we need to reflash stock before moving to this from Arrow. How about OTA implementation, is it implemented or will be implemented?
zeyaan said:
Saw some bullying against you but glad this came out well. I will be testing soon. Just wanted to understand if we need to reflash stock before moving to this from Arrow. How about OTA implementation, is it implemented or will be implemented?
Click to expand...
Click to collapse
I saw the ota feature under system updates, however when checking for updates it shows network connection error
keyoke87 said:
I saw the ota feature under system updates, however when checking for updates it shows network connection error
Click to expand...
Click to collapse
Dismiss that thing
nvm deleted
does stock rom need to be flash before flashing this and can it be flashed over global 12.0.5 I am currently on EU weekly so do i need to mi flash global stock before this.
sam00561 said:
does stock rom need to be flash before flashing this and can it be flashed over global 12.0.5 I am currently on EU weekly so do i need to mi flash global stock before this.
Click to expand...
Click to collapse
i think its better to flash latest stock rom through miflash and then flash this rom
Suhaas said:
i think its better to flash latest stock rom through miflash and then flash this rom
Click to expand...
Click to collapse
Hey Suhas, do you have any short guide or tip or video link on how to flash latest stock rom? Thanks in advance. Pinning on you as your advise helped me last time when I got into arrow
Also can someone share screenshots and customisation menu details please.
zeyaan said:
Hey Suhas, do you have any short guide or tip or video link on how to flash latest stock rom? Thanks in advance. Pinning on you as your advise helped me last time when I got into arrow
Click to expand...
Click to collapse
first download the fastboot rom for your phone from this link
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
and then extract the rom file .
download miflash from this link
Xiaomi Flash Tool - Official Mi Flash Tool
Download the latest and Official Xiaomi Flash Tool from the Official Xiaomi Flash Tool Website.
xiaomiflashtool.com
open miflash and click on select then choose the extracted stock fastboot rom folder. this folder will contains images. then connect the phone in fastboot mode. at the bottom right of mi flash app choose " clean all". be careful NOT to click on " clean all and lock" in mi flash tool, and then click refresh your phone should be displayed. check screenshot. then click flash. it will flash stock rom. at the end there will be a error dont worry about it. it is giving error because we are not locking bootloader. now you are in stock rom. let it boot into rom. after that just follow the instrutions mentioned in OP . this is the method i follow and it works fine for me.
anyone flashed the new build? i just flashed it and i am stuck in setup wizard. its not responding.
Suhaas said:
anyone flashed the new build? i just flashed it and i am stuck in setup wizard. its not responding.
Click to expand...
Click to collapse
Did you try flashing twrp n Magisk to boot up?
Try force restart
zeyaan said:
Did you try flashing twrp n Magisk to boot up?
Try force restart
Click to expand...
Click to collapse
i tried restarting and i didnt use twrp or magisk. its a clean flash.
Flashed this rom and been using it for an hour only. So far not good. Setup wizard took solid 5 mins to open up. After setting up the phone and installing the necessary apps I found out that the apps are not opening . Either they crash or take 3 to 5 min to open up. Am I missing something? What about others? Pls do share your experiences. Anyway I believe the dev is very capable and will release a better build later on. Has lot of customisations though.
it does not matter its initial build
您好,我是来自中国的用户。这个系统非常好用,但是还存在一些问题,就是系统界面不是全中文。对英语不好的用户不友好。希望作者能优化一下,谢谢Up。
----------
MOD EDIT: English Translation Below
Hello, I am a user from China. This system is very easy to use, but there are still some problems, that is, the system interface is not all Chinese. Not friendly to users who are not good at English. I hope the author can optimize it, thank you Up.