Hello! I tried to root my phone with the 13.0 and finally my phone boot only in the downloading mode. I cant go to the recovery mode and it cant boot normally. My pc recognize the phone same for odin. What can i do? This is my first attempt and it didnt went good. Have i damaged it? Thank you in advance.
Ras1992 said:
Hello! I tried to root my phone with the 13.0 and finally my phone boot only in the downloading mode. I cant go to the recovery mode and it cant boot normally. My pc recognize the phone same for odin. What can i do? This is my first attempt and it didnt went good. Have i damaged it? Thank you in advance.
Click to expand...
Click to collapse
Flash stock firmware.
When you have rooted your phone after installation have you removed the battery or turned off the phone?
Inviato dal mio GT-I9195 utilizzando Tapatalk
DarkJoker360 said:
Flash stock firmware.
When you have rooted your phone after installation have you removed the battery or turned off the phone?
Inviato dal mio GT-I9195 utilizzando Tapatalk
Click to expand...
Click to collapse
I tried to add the twrp recovery so i can root it with the 13.0 cyanogemod but it didnt went well. Now my phone boots only in downloading mode. Can u provide a link or guide please? Thanks
Ras1992 said:
I tried to add the twrp recovery so i can root it with the 13.0 cyanogemod but it didnt went well. Now my phone boots only in downloading mode. Can u provide a link or guide please? Thanks
Click to expand...
Click to collapse
Open odin
Download and unzip the firmware
Put it on AP button
Flash it
Firmwares(4.2.2 don' t work)
http://www.androidgalaxys.net/aggiornamento-galaxy-s4-mini-i9195/
Inviato dal mio GT-I9195 utilizzando Tapatalk
do you resolve problem?
Related
I ordered a new note 10.1 2014 on ebay from tropical_mobile.
I read on this forum that the product comes from Singapore or Malaysia and it has this stock fw inside P605OLBBMJ9.
Since I'm Italian and out of the box I'd flash the Italian stock fw (P605XXUBMJ9 with ITV csc) do you know if I will receive future Italian OTA/Kies update after this procedure?
Samsung SM-P9005 - Tapatalk
Nobody could help me?
Samsung SM-P9005 - Tapatalk
mouse100 said:
Nobody could help me?
Samsung SM-P9005 - Tapatalk
Click to expand...
Click to collapse
Hi, when you go to odin mode, what does it display on the screen....?
Does it say that the status is official with your country code ....?
2nd does it say that your device is modified when u check for updates...?
Should be no problem to receive ota with a stock rom which is flashed via odin
Gesendet von meinem SM-P600 mit Tapatalk
ashvirk said:
Hi, when you go to odin mode, what does it display on the screen....?
Does it say that the status is official with your country code ....?
2nd does it say that your device is modified when u check for updates...?
Click to expand...
Click to collapse
No problem when I search for updates and my status are official.
Samsung SM-P605 - Tapatalk
mouse100 said:
No problem when I search for updates and my status are official.
Samsung SM-P605 - Tapatalk
Click to expand...
Click to collapse
no worries than mate, you will get updates as they come
Hi, I'm interested in this, I bought a Note 2014 p605 from Hong Kong as well but I'd like to flash a Spain or Euro stock rom. Is it necessary to root the device before using Odin? Is there a tutoria/faq somewhere?
mouse100, where did you find the steps to do this?
Cheers.
I found steps from my experience
You don't need root to flash euro rom and your status remains official and Knox will remain 0x0.
Here what you have to do:
1- install samsung kies 3 (to obtain official drivers)
2- Download odin 3.09
3- Go to sammobile website and search for latest European stock rom you like for your sm-p605 and with your preferred CSC
4- When your tablet is power off, turn it on by pressing ON+Vol down
5- Connect your tablet to pc and let it install all drivers automatically
6- Extract the downloaded firmware and you should obtain a tar/md5 file. So click on AP button and load that file. Don't touch others options.
7- Click start and wait until flash is finished.
8- Tablet will reboot and it takes some minutes to be ready.
Samsung SM-P9005 - Tapatalk
Make sure that all kies processes are turned off on your computer (task manager) when you are flashing a firmware with odin. It can cause problems.
Gesendet von meinem SM-P600 mit Tapatalk
mouse100 said:
I found steps from my experience
You don't need root to flash euro rom and your status remains official and Knox will remain 0x0.
Here what you have to do:
1- install samsung kies 3 (to obtain official drivers)
2- Download odin 3.09
3- Go to sammobile website and search for latest European stock rom you like for your sm-p605 and with your preferred CSC
4- When your tablet is power off, turn it on by pressing ON+Vol down
5- Connect your tablet to pc and let it install all drivers automatically
6- Extract the downloaded firmware and you should obtain a tar/md5 file. So click on AP button and load that file. Don't touch others options.
7- Click start and wait until flash is finished.
8- Tablet will reboot and it takes some minutes to be ready.
Samsung SM-P9005 - Tapatalk
Click to expand...
Click to collapse
benni2903 said:
Make sure that all kies processes are turned off on your computer (task manager) when you are flashing a firmware with odin. It can cause problems.
Gesendet von meinem SM-P600 mit Tapatalk
Click to expand...
Click to collapse
Thank you very, very much! :good:
I have just managed to flash Maclaw's CM11 ROM onto a stock, rooted GT-I8160. Everything works apart from the mobile radio. Under Settings > About Phone > Status it says "Service status: Radio Off" and "Network disconnected". The phone has an IMEI number and a baseband number.
So far I have tried:
Rebooting with charger plugged in.
Building a full charge.
Trying to select a network provider. It just says "Error while searching for network operators."
Is there anything else I should try before just restoring from a backup?
vixus0 said:
I have just managed to flash Maclaw's CM11 ROM onto a stock, rooted GT-I8160. Everything works apart from the mobile radio. Under Settings > About Phone > Status it says "Service status: Radio Off" and "Network disconnected". The phone has an IMEI number and a baseband number.
So far I have tried:
Rebooting with charger plugged in.
Building a full charge.
Trying to select a network provider. It just says "Error while searching for network operators."
Is there anything else I should try before just restoring from a backup?
Click to expand...
Click to collapse
Have you flashed stock JB before flashing CM or you flash directly from GB? If you flashed from GB flash JB with pit then reflash CM
Inviato dal mio GT-I8160 utilizzando Tapatalk
pedroleon99 said:
Have you flashed stock JB before flashing CM or you flash directly from GB? If you flashed from GB flash JB with pit then reflash CM
Inviato dal mio GT-I8160 utilizzando Tapatalk
Click to expand...
Click to collapse
I flashed directly from GB. I thought that might be the problem. Thanks for the idea.
Also, what do you mean by "JB with pit"?
vixus0 said:
I flashed directly from GB. I thought that might be the problem. Thanks for the idea.
Also, what do you mean by "JB with pit"?
Click to expand...
Click to collapse
I mean MB4 leaked you can download it from this link https://mega.co.nz/#F!81NCjTja!aNC1QE_qbkc5gaB6Uz7ibQ
flash the files downloaded with Odin then download the jb firmware that you prefer from sammobile and flash also this with Odin. After done that you can flash cm11 and it will works perfectly
Inviato dal mio GT-I8160 utilizzando Tapatalk
pedroleon99 said:
I mean MB4 leaked you can download it from this link --link--
flash the files downloaded with Odin then download the jb firmware that you prefer from sammobile and flash also this with Odin. After done that you can flash cm11 and it will works perfectly
Click to expand...
Click to collapse
Ok, so I need to flash all the files in that mega.co.nz folder using Odin and then flash the stock JB from sammobile?
I'll try this. Thanks very much.
vixus0 said:
I flashed directly from GB. I thought that might be the problem. Thanks for the idea.
Also, what do you mean by "JB with pit"?
Click to expand...
Click to collapse
geez..
you can just flash a one part .md5 jb fw file and then cm11. 3 part isnt necessary. if you only have 482mb ram, find and flash the 624mb ram patch(thread in dev forum)
I followed all your instructions and after rebooting CM11 twice, I have radio connectivity back! Thank you very much!
Pls help me mi GT-I9192 isnt boot, it stucks on boot logo and it says recovery booting, i've flashed a 4.4.2 oficial firmware with odin, what should I do?
BSHD666 said:
Pls help me mi GT-I9192 isnt boot, it stucks on boot logo and it says recovery booting, i've flashed a 4.4.2 oficial firmware with odin, what should I do?
Click to expand...
Click to collapse
Have you been able to SOLVED your problem !
zakiyy said:
Have you been able to SOLVED your problem !
Click to expand...
Click to collapse
Nope, I sold this phone, no more samsung bombs for me! Jaja
hello guys after rooting my device everything went ok but when it auto started it says that normal boot could not be loaded
and it restarts in download mode,please help me with this problem,how i can fix it !
i have a picture of it ,after shut down and restart it remains stucked on this step...
It remains stucked in Downloading after each restart!
Marius D. said:
hello guys after rooting my device everything went ok but when it auto started it says that normal boot could not be loaded
and it restarts in download mode,please help me with this problem,how i can fix it !
i have a picture of it ,after shut down and restart it remains stucked on this step...
It remains stucked in Downloading after each restart!
Click to expand...
Click to collapse
Reflash the stock firmware for your device via ODIN to fix this.
Here is a video to help you.
i have mannaged to fix it this afternoon..but now i can't get updates trough OTA ,with this flash
http://forum.xda-developers.com/showthread.php?t=2666232
After that i have updated it from KIES and my firmare and bin are still custom !
Marius D. said:
i have mannaged to fix it this afternoon..but now i can't get updates trough OTA ,with this flash
http://forum.xda-developers.com/showthread.php?t=2666232
After that i have updated it from KIES and my firmare and bin are still custom !
Click to expand...
Click to collapse
Of course you can't because you flashed a custom rom. Flash the official one.
where i can find the official one ?
Marius D. said:
where i can find the official one ?
Click to expand...
Click to collapse
Here:
www.sammobile.com/firmwares/database/
You have to sign up if you want to download the firmware.
Getting BLUE SCREEN after flashing some ROMS
currently i am on CARBON-CR-6.1-NOCT-UNOFFICIAL-z2_plus-20180913-0919.zip
some time before all roms are working but now when i try to change i am ending up a blue screen which goes on boot and boot
i tried flashing stock rom using qpst and then flash other some roms but i ended up same problem
had this issue mostly with pie roms(pixysos and bootleggers)
but not having this problem with havoc os(pie) (Havoc-OS-v2.0-20180914-z2_plus-Unofficial) & Deodexed-Oreo-Stock-Rom-Zuk-Z2-Plus-4.0.233-ST (porting from ZUK Z2 PRO)
please help me
i found out that i need to update firmware
which zui i had to flash through qfil and links please
vikkiklv said:
Getting BLUE SCREEN after flashing some ROMS
currently i am on CARBON-CR-6.1-NOCT-UNOFFICIAL-z2_plus-20180913-0919.zip
some time before all roms are working but now when i try to change i am ending up a blue screen which goes on boot and boot
i tried flashing stock rom using qpst and then flash other some roms but i ended up same problem
had this issue mostly with pie roms(pixysos and bootleggers)
but not having this problem with havoc os(pie) (Havoc-OS-v2.0-20180914-z2_plus-Unofficial) & Deodexed-Oreo-Stock-Rom-Zuk-Z2-Plus-4.0.233-ST (porting from ZUK Z2 PRO)
please help me
i found out that i need to update firmware
which zui i had to flash through qfil and links please
Click to expand...
Click to collapse
I guess that you cannot resolve the "blue-screen issue" without the QFIL method, which is required if the boot-loader of your device is too old, as it was mine.
I have already briefly reported how I did, but I will try to do it again in a more detailed form.
You need a Windows PC and Qualcomm QPST, read this carefully: https://zukfans.eu/community/threads/howto-flash-a-stock-zui-rom-zuk-z2-z2131-only.104/
You need a ZUI QPST archive above version 3.1 as reccomended by the OP, I used this: ZUI 3.5.389 [url]https://drive.google.com/open?id=1xWGFtcMZhMeOAsmASj4fwJzzbHOZZwdj[/URL]
I failed to use the method 1: using the command "adb reboot edl" (my device was just shutting-down and never enter into EDL mode as requested by QFIL.
I used successfully the method 2: using Volume+ and Power buttons:
1. disconnect USB cable and turn the phone completely off
2. press volume-up, and keep it pressed until further notice
3. press power button, keep it pressed for about 1/2 a second (yeah, that timing thing...)
4. insert usb cable (both volume-up and power still pressed at this point)
5. wait for short vibration - you should also see the ZUK logo flash on screen for a split second
6. now you can release both power and volume-up, you should already see the USB device coming up on PC
If anything different happens, just disconnect, power-off and start again... Have fun!
When you finish the flashing of the ZUI QPST ROM, you should reboot and set the 4G to extended capabilities, in case you have VoLTE on your area.
Then you need to verify if your boot-loader is still unlocked (as mine was) in case it being locked you must proceed to unlock it again as you did the first time.
Then you have to flash the recovery.img (I used TWRP).
Finally you have to flash the TWRP with Treble support (z2_plus_treble-TWRP-3.2.2_kubersharma_v2.img) and factory_to_vendor.zip (factory2vendor_z2_plus.zip).
If all the above end up correctly, you can proceed to flashing AEX 6.0 official and Gapps*
* Note: I used older version of nano Gapps arm64 android 9 (open_gapps-arm64-9.0-nano-20181009.zip) because the newer release was not allowing to restore my Google backup.
Hope you could get some help with my description!
Regards,
Credits - @mcalistri
Flash new firmware zip
Thanks!!!! Only method worked for me.
My baseband is 1.70 And the only thing that was installed on it was zui 2.5 indian, which I then switched to custom customs roms. So I can install a 4.4 kernel rom?
Zukker Fs! said:
My baseband is 1.70 And the only thing that was installed on it was zui 2.5 indian, which I then switched to custom customs roms. So I can install a 4.4 kernel rom?
Click to expand...
Click to collapse
Try it
if blue screen appears then flash the firmware zip
You don't have to take a risk of getting BL locked nethier waste your time flashing Qfil. In order to avoid it, use this guide
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/zuk-z2-baseband-flashing-guide-t3715121
satyen_ said:
Try it
if blue screen appears then flash the firmware zip
Click to expand...
Click to collapse
How I can do it?
Which firmware.zip I must flash?
Thanks in advance!
Inviato dal mio Z2 Plus utilizzando Tapatalk
sandruman said:
How I can do it?
Which firmware.zip I must flash?
Thanks in advance!
Inviato dal mio Z2 Plus utilizzando Tapatalk
Click to expand...
Click to collapse
See the op
https://forum.xda-developers.com/le...oreo-firmwarebaseband-twrp-flashable-t3776254
I've flashed this FIRMWARE_BASEBAND_ZUI3.5.337_Z2PLUS_TWRP.zip, but blue screen problem is always here.
Inviato dal mio Z2 Plus utilizzando Tapatalk
With qfil I've solved. Now I've a 4.4 kernel ROM.
sandruman said:
I've flashed this FIRMWARE_BASEBAND_ZUI3.5.337_Z2PLUS_TWRP.zip, but blue screen problem is always here.
Inviato dal mio Z2 Plus utilizzando Tapatalk
With qfil I've solved. Now I've a 4.4 kernel ROM.
Click to expand...
Click to collapse
How to solve through qfil because I have blue screen issue and need kernel 4.4
You must flash firmware 3.5xx whith qfil
Inviato dal mio Z2 Plus utilizzando Tapatalk
pawankerdwal said:
How to solve through qfil because I have blue screen issue and need kernel 4.4
Click to expand...
Click to collapse
Qfil 1.9 zui then update it to 3.5 via updater in rom