Develop Bugs

Can anyone prove me marshmallow latest update stock firmware ? MOB31E ?

Can anyone provide me stock firmware. my mobile got stuck on boot animation please help me ?

vivek1310yadav said:
Can anyone provide me stock firmware. my mobile got stuck on boot animation please help me ?
Click to expand...
Click to collapse
Well there's no MM based SPFT file, so all you have to do is either flash stock kk/LP using SPFT or if you've twrp installed, boot into TWRP again and wipe everything except SD, flash the MOB31E full stock Rom zip. Link : MOB31E OTA's and flashable zips thread

sachin n said:
Well there's no MM based SPFT file, so all you have to do is either flash stock kk/LP using SPFT or if you've twrp installed, boot into TWRP again and wipe everything except SD, flash the MOB31E full stock Rom zip. Link : MOB31E OTA's and flashable zips thread
Click to expand...
Click to collapse
Hello, please help
The device is canvas a1 and it is fully updated till the last update via OTAs only. I performed factory reset on it. It is now stuck on setup wizard. Not able to skip from there.
I wanted to flash it again.
So, can you please tell if it is OK to flash KK or LP flash files?
(I am asking this because, its BL might have got upgraded in OTA updates and it could be dangerous to downgrade to lower versions by flashing.)

pra27 said:
Hello, please help
The device is canvas a1 and it is fully updated till the last update via OTAs only. I performed factory reset on it. It is now stuck on setup wizard. Not able to skip from there.
I wanted to flash it again.
So, can you please tell if it is OK to flash KK or LP flash files?
(I am asking this because, its BL might have got upgraded in OTA updates and it could be dangerous to downgrade to lower versions by flashing.)
Click to expand...
Click to collapse
Do you've twrp recovery installed at the moment?

sachin n said:
Do you've twrp recovery installed at the moment?
Click to expand...
Click to collapse
No it is not even unlocked yet.

pra27 said:
No it is not even unlocked yet.
Click to expand...
Click to collapse
Remove your battery and insert it again, put the device into bootloader mode and unlock it, then you can fastboot the twrp and good to go.
Sent from my Redmi Note 4 using Tapatalk

sachin n said:
Remove your battery and insert it again, put the device into bootloader mode and unlock it, then you can fastboot the twrp and good to go.
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
You mean after this I can file LP flash files?
No downgrading bootloader issues right?

pra27 said:
You mean after this I can file LP flash files?
No downgrading bootloader issues right?
Click to expand...
Click to collapse
Nothing to worry. Once you get twrp, just clean flash stock lollipop Rom. Don't use SPFT, you gonna brick your phone if something goes wrong wrong. I'll link you LP (flashable via twrp) Rom, tell me when you done.

sachin n said:
Nothing to worry. Once you get twrp, just clean flash stock lollipop Rom. Don't use SPFT, you gonna brick your phone if something goes wrong wrong. I'll link you LP (flashable via twrp) Rom, tell me when you done.
Click to expand...
Click to collapse
Thanks a lot for your help.
Should i flash this twrp ? (from official site)
https://dl.twrp.me/sprout/

pra27 said:
Thanks a lot for your help.
Should i flash this twrp ? (from official site)
https://dl.twrp.me/sprout/
Click to expand...
Click to collapse
Nah, use this : https://www.androidfilehost.com/?fid=24562946973632081
Stable enough!!!!

sachin n said:
Nah, use this : https://www.androidfilehost.com/?fid=24562946973632081
Stable enough!!!!
Click to expand...
Click to collapse
thanks.. bdw that official twrp whose link i gave is also for sprout4 right?
Please give the stock rom link you were talking about earlier.

pra27 said:
thanks.. bdw that official twrp whose link i gave is also for sprout4 right?
Please give the stock rom link you were talking about earlier.
Click to expand...
Click to collapse
Yes it was also sprout4, in fact for both sprout 4 and sprout 8.
This : https://drive.google.com/uc?id=0B9_eDTtTcnv1LTF2UFhaSjhhZWM&export=download
Boot to TWRP
Wipe everything except SD card
Flash this rom
Reboot

sachin n said:
Yes it was also sprout4, in fact for both sprout 4 and sprout 8.
This : https://drive.google.com/uc?id=0B9_eDTtTcnv1LTF2UFhaSjhhZWM&export=download
Boot to TWRP
Wipe everything except SD card
Flash this rom
Reboot
Click to expand...
Click to collapse
i found this and right now flashing marshmallow from this thread. https://forum.xda-developers.com/ca...-stock-debloated-prerooted-untouched-t3403499
can you please share the thread from which you shared the file? also if there any marshmallow zip available, please give its link.

pra27 said:
i found this and right now flashing marshmallow from this thread. https://forum.xda-developers.com/ca...-stock-debloated-prerooted-untouched-t3403499
can you please share the thread from which you shared the file? also if there any marshmallow zip available, please give its link.
Click to expand...
Click to collapse
Wait..
Edit : https://forum.xda-developers.com/crossdevice-dev/android-one-general/rom-t3120737
Sent from my mido using XDA Labs

sachin n said:
Wait..
Edit : https://forum.xda-developers.com/crossdevice-dev/android-one-general/rom-t3120737
Sent from my mido using XDA Labs
Click to expand...
Click to collapse
Thanks bro, you have been helpful in bringing my phone back to life.
One last thing though, what should i do incase some OTA arrives.. is there any way to block it?

pra27 said:
Thanks bro, you have been helpful in bringing my phone back to life.
One last thing though, what should i do incase some OTA arrives.. is there any way to block it?
Click to expand...
Click to collapse
Disable Gplay services notifications. Or Just download and flash MOB31E stock Rom. Zip
Sent from my mido using XDA Labs

Hi there
I have the same problem and my phone is stuck at the boot screen.
My phone does not allow me to enable USB debugging and I am really stuck with being able to install TWRP and flash the stock ROM.
I'm incredibly confused and am unsure what I am doing. Attached is a screenshot of the CMD box.
Help and simple instructions would be appreciated.
Thanks in advance.

Bootloop after flahsing Magisk & no-verity zips

Hi,
I just tried to root my Mi Max 3 but got bootloop, what can I do?
I unlocked the device.
Then I flashed TWRP 3.2.0. nitrogen, devcie was encrypted then.
I flashed Magisk 18.1., rebooted, but bootloop.
I rebooted into TWRP again and flashed no-verity-opt-encrypt-6.0.zip and again Magisk 18.1 and rebooted, but bootloop only.
I did factory reset but bootloop only.
What am I suposed to do? Any help from you guys?
Thanks you very much !

download and install the latest twrp from nijel8. Make a wipe and install only a clean rom and magisk. Nothing more. It must work.

Tried magisk 18.0?
I use magisk 18.0 and official twrp 3.2.3.0.

Hi,
it didnt help unfortunately.
I think I first need to flash a stock firmware completely right? Then try another round with the suggested versions by you guys.
I downloaded stock ROM from Xiao Mi Website here: http://en.miui.com/a-234.html
It is named: nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218.0000.00_8.1_global
But when I try to flash it via fastboot mode and the help of Xiao Mi Flash Tool I get an error like this (attachment)
Any help?
Update: I just flashed official full rom named: miui_MIMAX3Global_V10.2.1.0.OEDMIFK_885d8903d6_8.1.zip via TWRP and it didnt show any errors (but TWRP still installed, I expected stock revoery actually?!). I wiped cache and rebooted but still bootloop.
I am really not sure what to do now.
Update 2: I now was able to flash stock rom (nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218.0000.00_8.1_global) via fastboot mode (error like on screenshot didnt appear anymore, dont really know why) now phone is only booting into stock MIUI recovery and shows a red noteification: "This MIUI Version cant be installed on this device" -> Can anybode give me help please?
Update 3: Tried to unlock again but it fails due to my device is not bound to my MI Account, but how to add it to account as I cant boot it up anymore and go to the settings in android. Or do I need another FULL Rom? I read smth that this error (Rom cant be installed on this device) appears if one is trying to flash Global Rom instead of China ROM? Where to get this one? Dont know the difference actually But my phone had google services preinstalled
I now even downloaded the chinese full rom: Mi Max 3 China Stable ROM 10.0.6.0 – V10.0.6.0.OEDCNFH / MIUI 9 / fastboot / Android Oreo because I think maybe this was originally i nstalled (purchased phone in Indonesia which is black market)
but once I try to flash it, the mix flash tool tells me now erase is not allowed in locked mode. I need to unlock first? but how? Unlock bootloader is not possible due to device is not bound with my mi-account.

I am really lost know
current situation:
not able to flash china full rom because locked
not able to unlock because device not bound to mi-account
I amonly able to bootup into mi-stock reciovery and stock bootloader.
what can I do?

tobyffm said:
I am really lost know
current situation:
not able to flash china full rom because locked
not able to unlock because device not bound to mi-account
I amonly able to bootup into mi-stock reciovery and stock bootloader.
what can I do?
Click to expand...
Click to collapse
What base it has, china or global when you get it?

tobyffm said:
I am really lost know
current situation:
not able to flash china full rom because locked
not able to unlock because device not bound to mi-account
I amonly able to bootup into mi-stock reciovery and stock bootloader.
what can I do?
Click to expand...
Click to collapse
Can't you flash from stock recovery? Download recovery rom matching your stock recovery(china or global), save in microsd. Enter recovery and flash rom.
Edit: sorry, just checked. Not possible to select file from stock mi recovery.

Lecterr said:
What base it has, china or global when you get it?
Click to expand...
Click to collapse
I dont really know. AT least all google services were available. does this mean it has been the global base? I bought this phone in Indonesia were it is not available officially, only through some black market sellers in the malls. Maybe they also have used the chinese versions, unlocked and reflashed the global versions and then they sell it. So maybe it has been the chinese base originally but is sold out with the global version? On the devices backside is a sticker with IMEi, IMEI2, MEID and SN, does this say anything about the version?
bobo9900 said:
Can't you flash from stock recovery? Download recovery rom matching your stock recovery(china or global), save in microsd. Enter recovery and flash rom.
Click to expand...
Click to collapse
I think not, in Stock Recovery which is now installed on the phone I only have Reboot, Wipe Data and Connect MIAssistant

How about this?
https://forum.xda-developers.com/redmi-note-5-pro/how-to/tut-flashing-official-recovery-rom-t3798165
Same chipset as mi max3..

bobo9900 said:
How about this?
https://forum.xda-developers.com/redmi-note-5-pro/how-to/tut-flashing-official-recovery-rom-t3798165
Same chipset as mi max3..
Click to expand...
Click to collapse
thanks a lot for this tip, bro. I am not sure because in this guide they say it will help you to flash a recovery? I am having stock recovery already installed. I need to reflash the correct Rom. Anyway, I will try it asap. Atm it fails due to bad internet connection in my hotel right now.
I will download following ROM: Chinese Stable: MIUI 10 V10.2.1.0.OEDCNXM as a .zip archive and will try to load it into the Mi Assistant tool and try to start flashing from there. OK? Will let you know about the result then.

tobyffm said:
thanks a lot for this tip, bro. I am not sure because in this guide they say it will help you to flash a recovery? I am having stock recovery already installed. I need to reflash the correct Rom. Anyway, I will try it asap. Atm it fails due to bad internet connection in my hotel right now.
I will download following ROM: Chinese Stable: MIUI 10 V10.2.1.0.OEDCNXM as a .zip archive and will try to load it into the Mi Assistant tool and try to start flashing from there. OK? Will let you know about the result then.
Click to expand...
Click to collapse
Its for flashing rom. Use the recovery rom, not fastboot rom. What it means is that your recovery should match the rom. (MiRecovery china, recovery rom china. MiRecovery global, recovery rom global)
I dont know which recovery version you successfully flashed to phone, but i guess its china. Won't able too boot if device is locked and recovery is not original to phone aka china recovery.
Edit:from that thread,someone successfully flashed miui10. If you failed to do so, DO NOT try to flash miui9. Different ARB, will permanently brick device.

bobo9900 said:
Its for flashing rom. Use the recovery rom, not fastboot rom. What it means is that your recovery should match the rom. (MiRecovery china, recovery rom china. MiRecovery global, recovery rom global)
I dont know which recovery version you successfully flashed to phone, but i guess its china. Won't able too boot if device is locked and recovery is not original to phone aka china recovery.
Edit:from that thread,someone successfully flashed miui10. If you failed to do so, DO NOT try to flash miui9. Different ARB, will permanently brick device.
Click to expand...
Click to collapse
bobo9900 said:
Its for flashing rom. Use the recovery rom, not fastboot rom. What it means is that your recovery should match the rom. (MiRecovery china, recovery rom china. MiRecovery global, recovery rom global)
I dont know which recovery version you successfully flashed to phone, but i guess its china. Won't able too boot if device is locked and recovery is not original to phone aka cina recovery.
Click to expand...
Click to collapse
My recovery is at least in english language, does this help?
I just tried to flash the CN rom package mentioned in my last post with this MiAssistant Beta 3.0, but package verification failed:
Does this mean it is the wrong rom package and I simply need to download the other versions and test it with other ones and once erfification works fine I will know this must be the correct one? Or is this just another error i am know running into?
Any idea?
Many tanks!
PS: Many thanks for your update: I only tried to load miui_MIMAX3_V10.2.1.0.OEDCNXM_4f84ff82ea_8.1.zip into that Mi Assistant but verification failed, didnt do anything else so far.

tobyffm said:
My recovery is at least in english language, does this help?
I just tried to flash the CN rom package mentioned in my last post with this MiAssistant Beta 3.0, but package verification failed:
Does this mean it is the wrong rom package and I simply need to download the other versions and test it with other ones and once erfification works fine I will know this must be the correct one? Or is this just another error i am know running into?
Any idea?
Many tanks!
PS: Many thanks for your update: I only tried to load miui_MIMAX3_V10.2.1.0.OEDCNXM_4f84ff82ea_8.1.zip into that Mi Assistant but verification failed, didnt do anything else so far.
Click to expand...
Click to collapse
I guess verification failed means not matching. You can try global rom. Btw, have you try wipe data. Maybe rom already flashed properly but data bug causes bootloop. Try wipe then reboot.

bobo9900 said:
I guess verification failed means not matching. You can try global rom. Btw, have you try wipe data. Maybe rom already flashed properly but data bug causes bootloop. Try wipe then reboot.
Click to expand...
Click to collapse
Yes, I also used this wipe feature in this Mi Assistant but unfortunately it did not help. After rebooting again bootup screen appears a bit longer and I can hear a short beep sound which let me think it will boot up properly but unfortunately it then restarts into recovery mode only.
well installed is this one: nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218.0000.00_8.1_global, which I flashed earlier today via mi flash tool.
Now I tried to flash miui_MIMAX3Global_V10.2.1.0.OEDMIFK_885d8903d6_8.1.zip which should be the same, but verification failed, too.
Does it make sense?!
In this thread, there are many Stock Roms available:
https://forum.xda-developers.com/mi-max-3/how-to/rom-official-recovery-fastboot-roms-mi-t3827503
Shall I download all MIUI 10 Stable (Global and China) and try?

tobyffm said:
Yes, I also used this wipe feature in this Mi Assistant but unfortunately it did not help. After rebooting again bootup screen appears a bit longer and I can hear a short beep sound which let me think it will boot up properly but unfortunately it then restarts into recovery mode only.
well installed is this one: nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218.0000.00_8.1_global, which I flashed earlier today via mi flash tool.
Now I tried to flash miui_MIMAX3Global_V10.2.1.0.OEDMIFK_885d8903d6_8.1.zip which should be the same, but verification failed, too.
Does it make sense?!
In this thread, there are many Stock Roms available:
https://forum.xda-developers.com/mi-max-3/how-to/rom-official-recovery-fastboot-roms-mi-t3827503
Shall I download all MIUI 10 Stable (Global and China) and try?
Click to expand...
Click to collapse
Global and china rom have their own signature. But different version always have same signature. If verification failed, I thought signature didn't match.
Now you have tried both global and china and still failed. I'm confused. I don't have any idea anymore..

bobo9900 said:
Global and china rom have their own signature. But different version always have same signature. If verification failed, I thought signature didn't match.
Now you have tried both global and china and still failed. I'm confused. I don't have any idea anymore..
Click to expand...
Click to collapse
Thanks anyway bobo9900 for assisting me. And I should not try to flash a MIUI 9 rom, yeah?
Argh, I really don't understand it. I just got this phone yesterday, unlocked and installed twrp and magisk by using a how.to especially for Mi Max 3 and ran into this issue, FU**. Why does this happen to me, I only did these simple steps. Phone for trash after 1 day already?
Anybody else there who can help me?

tobyffm said:
Thanks anyway bobo9900 for assisting me.
Argh, I really don't understand it. I just got this phone yesterday, unlocked and installed twrp and magisk by using a how.to especially for Mi Max 3 and ran into this issue, FU**. Why does this happen to me, I only did these simple steps. Phone for trash after 1 day already?
Anybody else there who can help me?
Click to expand...
Click to collapse
Confirm your version global or china, so other might able to help. Mine come locked with screen protector sticker in English without Chinese words. Box had 'global version' written in red sticker.
Semoga sukses bro..

bobo9900 said:
Confirm your version global or china, so other might able to help. Mine come locked with screen protector sticker in English without Chinese words. Box had 'global version' written in red sticker.
Semoga sukses bro..
Click to expand...
Click to collapse
well, now there is nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218. 0000.00_8.1_global installed on the phone.
Also the Mi Assistant tool recgnizes V10.2.1.0.OEDMIFK as currently installed. My box has pon backside some chinese signs, no teaser "Global version". I think it has been chinese but black market sellers flashed global roms already to fit the indonesian market.
But I just noticed that in this Mi Assistant tool I have the options "Flash" and "Quick FLash" (erase all data) and there they mention it will work with Miui 8 and 9. Seems this Assistant tool is not MIUI 10-ready?! And I couldnt find a newer version of this.
Maybe this is the reason why verification with MIUI 10 packages fails?

tobyffm said:
well, now there is nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218. 0000.00_8.1_global installed on the phone.
Also the Mi Assistant tool recgnizes V10.2.1.0.OEDMIFK as currently installed. My box has pon backside some chinese signs, no teaser "Global version". I think it has been chinese but black market sellers flashed global roms already to fit the indonesian market.
But I just noticed that in this Mi Assistant tool I have the options "Flash" and "Quick FLash" (erase all data) and there they mention it will work with Miui 8 and 9. Seems this Assistant tool is not MIUI 10-ready?! And I couldnt find a newer version of this.
Maybe this is the reason why verification with MIUI 10 packages fails?
Click to expand...
Click to collapse
Read the last page, someone manage to re flash 10.0.2.0.
If you wanna flash old version, check ARB level first.

bobo9900 said:
Read the last page, someone manage to re flash 10.0.2.0.
If you wanna flash old version, check ARB level first.
Click to expand...
Click to collapse
OK checked. Through fastboot check of ARB I get:
fastboot getvar anti
getvar:anti FAILED (remote: GetVar Variable Not found)
finished. total time: 0.016s
Wondering again why again an error lol
TRhrough opening flash_all.bat file I see:
CURRENT_ANTI_VER=4
fastboot %
which means I cant downgrade, ya?

ask about gsi images

Hello everyone I need help
How I install gsi ROM like hydrogen oxygen
In mi a2 lite daisy I have twrp but now I have miui ROM
Can I flash without reflash firmware in pc ? More options like a flash vendor boot or what thanks have a nice day my slot is A/B but boot set in (B)

robin_vilensky_ said:
Hello everyone I need help
How I install gsi ROM like hydrogen oxygen
In mi a2 lite daisy I have twrp but now I have miui ROM
Can I flash without reflash firmware in pc ? More options like a flash vendor boot or what thanks have a nice day my slot is A/B but boot set in (B)
Click to expand...
Click to collapse
First of all many users are confusing rom with firmware, the whole rom is flashed through fastboot or EDL (although OTA updates could be flashed through recovery) while the firmware is a small set of files that can be flashed through recovery in form of zips.
What I did to boot many GSIs out there? although any of them satisfied due to many bugs comparing with the developed custom roms for Daisy.
- Go to recovery and backup just the boot partition.
- Then format data.
- Then advanced wipe; data, system and cache/ART Dalvik cache.
- Transfer GSI to your device using any convenient method (transferring file or copying to your external SDcard)
- Flash the GSI on System Image partition.
- Restore the boot partition.
- Flash only the firmware zip (version may vary) Never I needed to flash the whole rom.
- Flash DFE.
- Switch to the other slot and reboot.
- If device won´t boot it could be required to flash a proper vendor version through fastboot. Pay attention to the slot that you flashed before to target the same slot if you need to flash this partition.
With this method I could boot to OneUI, Moto, nubia, ZenUI, HydrogenOS and Xperia while I can´t on ZUIOS and didn´t try with FlymeOS

Can I flash firmware via twrp ? Thanks

robin_vilensky_ said:
Can I flash firmware via twrp ? Thanks
Click to expand...
Click to collapse
Yes, this is why they´re done this way, to updates just some essential partitions, there is a thread here where you can download them.

SubwayChamp said:
Yes, this is why they´re done this way, to updates just some essential partitions, there is a thread here where you can download them.
Click to expand...
Click to collapse
,
Thank you ! You can send me link for firmware zip for twrp ? Thanks and it's not removed the twrp?

robin_vilensky_ said:
,
Thank you ! You can send me link for firmware zip for twrp ? Thanks and it's not removed the twrp?
Click to expand...
Click to collapse
I'm now far from a pc, under Guides section you can find it.
Doing this way you won't need to reflash TeamWin.

SubwayChamp said:
I'm now far from a pc, under Guides section you can find it.
Doing this way you won't need to reflash TeamWin.
Click to expand...
Click to collapse
From here it's okay ? https://c.mi.com/oc/miuidownload/detail?device=1700354 for twrp

SubwayChamp said:
I'm now far from a pc, under Guides section you can find it.
Doing this way you won't need to reflash TeamWin.
Click to expand...
Click to collapse
Thank you bro iam fine thanks for helping

robin_vilensky_ said:
From here it's okay ? https://c.mi.com/oc/miuidownload/detail?device=1700354 for twrp
Click to expand...
Click to collapse
I´m back, the link is to download the whole rom.
Remember the difference between rom and firmware that I mentioned before?.
This is the link for firmwares https://forum.xda-developers.com/mi-a2-lite/how-to/firmware-updates-daisy-t3975879
Anyway you´ll need sometimes the whole rom and sometimes it´ll be enough flashing just the firmware.

SubwayChamp said:
I´m back, the link is to download the whole rom.
Remember the difference between rom and firmware that I mentioned before?.
This is the link for firmwares https://forum.xda-developers.com/mi-a2-lite/how-to/firmware-updates-daisy-t3975879
Anyway you´ll need sometimes the whole rom and sometimes it´ll be enough flashing just the firmware.
Click to expand...
Click to collapse
Thanks for help bro big respect

Question China rom Android 12 ?

If Anyone installed china dev rom Android 12 on your device , give installation guide if possible thank you

drmagesh7 said:
If Anyone installed china dev rom Android 12 on your device , give installation guide if possible thank you
Click to expand...
Click to collapse
Unlock your device. Flash the china rom of 11. Root it and install this module throw magisk. Type 7 times on the miui logo in the update settings. Download the china recoveryy rom beta 12 on the root of your tablet. Select the three dot on the right and choose update from a local package. Choose the rom china beta 12 and wait to install it. You can root the 12 too if you want. You can find the guides of every point in this forum. Root, unlock, how to flash rom ecc...
Edit: there is a fastboot rom from the beta 12. You can install it directly throw xiaomi flash tool or throw the adb command, without to install before the china 11.
Link: https://xiaomirom.com/en/download/xiaomi-pad-5-nabu-weekly-V13.0.0.1.46.DEV/#china-fastboot

Thank you so much

Got stuck on fastboot mode not working falsh all and mi flash says error reading sparse file like that I have downloaded many files, it's again comes like this, help through this thank you

drmagesh7 said:
Got stuck on fastboot mode not working falsh all and mi flash says error reading sparse file like that I have downloaded many files, it's again comes like this, help through this thank you
Click to expand...
Click to collapse
You have to boot in bootloader mode. Adb reboot bootloader

My device totally dead , it's not turning on its completely black screen power button and volume down method it's not working any solution

drmagesh7 said:
My device totally dead , it's not turning on its completely black screen power button and volume down method it's not working any solution
Click to expand...
Click to collapse
are you sure you flashed the correct CN firmware for nabu?

Blanc_WhiteHeart said:
are you sure you flashed the correct CN firmware for nabu?
Click to expand...
Click to collapse
Ya this one

Redmi note 9 (Merlin): How to Downgrade from Android 12 ( MIUI 13.0.1) to android 10

Please how do I flash/downgrade my Redmi note 9(3/64gb) Merlin to android 10 (maybe to MIUI 12.0.4 or 12.0.6). I'm already on Android 12 MIUI 13.0.1.
My phone hangs alot, apps force closes after minimizing. Please help me out. What do I do and how do I go about it?

Did you try to allow apps to keeps open on developer settings?
If you really want to downgrade, so:
First, backup data.
Then, just flash MIUI version you want.
If the device got bootloop, just format data.

VD171 said:
Did you try to allow apps to keeps open on developer settings?
If you really want to downgrade, so:
First, backup data.
Then, just flash MIUI version you want.
If the device got bootloop, just format data.
Click to expand...
Click to collapse
Please what's the procedure to flash MIUI, I have not flashed any Redmi device before. I'm new to flashing of phones or if you can refer me to a thread

First, backup data.
Then, unlock bootloader, enter in fastboot and flash any MIUI version you want.

VD171 said:
First, backup data.
Then, unlock bootloader, enter in fastboot and flash any MIUI version you want.
Click to expand...
Click to collapse
Ok thanks. Which of the tools should I use in flashing, Sp flash tool?

Did you try to do a factory reset? Most of the time, when you change the version of MIUI, if it is not done, it slows down and gives errors as it happens to you.

Yes i have done factory reset but still experiencing it...
I just don't know which tool i will use to flash it
joseac said:
Did you try to do a factory reset? Most of the time, when you change the version of MIUI, if it is not done, it slows down and gives errors as it happens to you.
Click to expand...
Click to collapse

joseac said:
Did you try to do a factory reset? Most of the time, when you change the version of MIUI, if it is not done, it slows down and gives errors as it happens to you.
Click to expand...
Click to collapse
Please can you refer me to a post/thread where i can get step by step procedures of flashing it. I'm new to flashing MIUI devices.

uzodigwe said:
Please can you refer me to a post/thread where i can get step by step procedures of flashing it. I'm new to flashing MIUI devices.
Click to expand...
Click to collapse
Do you know this app? https://www.xiaomitool.com/V2/

joseac said:
Do you know this app? https://www.xiaomitool.com/V2/
Click to expand...
Click to collapse
I just read about it now... I'm downloading it. What next please?

uzodigwe said:
I just read about it now... I'm downloading it. What next please?
Click to expand...
Click to collapse
Look for a tutorial, all the ones I look for come out in a language that is not yours...

joseac said:
Look for a tutorial, all the ones I look for come out in a language that is not yours...
Click to expand...
Click to collapse
If it is written tutorial, i will use translator.

uzodigwe said:
If it is written tutorial, i will use translator.
Click to expand...
Click to collapse

joseac said:
Click to expand...
Click to collapse
I flashed custom recovery on my note 9 Merlin and downgraded to 11.0.4 (A10) from 13.0.1 (a12), now I'm getting OTA update of 12.0.8, can I install the update with custom recovery and unlocked bootloader?
Note: I want to install another version of MIUI on Android 10 because my proximity sensor started having issues after the downgrade.

uzodigwe said:
I flashed custom recovery on my note 9 Merlin and downgraded to 11.0.4 (A10) from 13.0.1 (a12), now I'm getting OTA update of 12.0.8, can I install the update with custom recovery and unlocked bootloader?
Note: I want to install another version of MIUI on Android 10 because my proximity sensor started having issues after the downgrade.
Click to expand...
Click to collapse
Just flash using fastboot.