Develop Bugs

Screen died?

Last night I was out and during the night I pulled my desire z out of my pocket to find that the screen was dead, the soft touch buttons were still lit up and working but no display. I pulled the battery and tried to reboot and no luck, you can hear it booting and even unlock/receive calls and txts etc once it has booted up just the screen stays blank the whole time so have to do everything on feel.
Essentially does this just mean my screen has a hardware fault? is it worth trying to fix? I assume the only option would be to purchase a replacement screen and dissemble and reassemble it?
(warranty is not worth it as I live in New Zealand and would have to send my phone back to the UK where I bought it from, also I have dropped it quite a few times so probably voided anyway...)
Thanks in advance for any input

Does it never display anything? So not even a flash during boot or something?
Because then it is probably a hardware problem.
Since the soft touch buttons do still work I think there might be a little crack or something in the flat cable that connects the bottom half with the top.
Maybe you could check whether you can see if the cable is broken or not?
The best thing to do then is to look for a replacement and try to fix it yourself or bring it to a shop where they can do it for you.

No it never displays anything, completely dead the whole time. The touch input is still working though as I answered a phone call this morning on it by making the usual gesture just without being able to see anything. Doesnt seem to be anything wrong with the cable itself as far as I can see. Yea might have to get someone to have a look at it.

My phone is acting the same. I dropped my phone in the pond before, but pulled battery out on time and had it in rice for a day. My phone was still working for about two weeks after that incident. I dropped it and had one little crack at the top of the screen and about a week after that it died when I had a water balloon fight with the phone in my pocket. D;
Do any of you know if the replacement lcd screen/digitizer for the Desire Z would work for the G2?

I had the same thing happening to my G2 screen, only it was intermittently working for a little while, then just completely died and wouldn't work. It was doing this crazy flickering thing then the back light wouldn't go on at all. If I held the phone at a certain angle in the sun, I could see that the pixels were indeed working on the display, but there was no backlight to make them normally visible.
So I purchased a replacement screen from ebay and carefully followed the directions on a youtube video for a G2 take apart. Its not a hard task to take apart and get down to the screen itself. It was rather easy. After putting it back together the screen still didn't work! Sounds work, i can also receive calls etc. But the screen still doesn't work!
Is there any way that this could be a software issue?

Oh and PS, I believe the LCD replacement would work for both the desire Z and the G2. They are identical phones after all right? I'd say its a safe bet. The screen I bought was only 35 bucks. Didn't think that was a bad deal.

Another dead screen or something else?
Few days ago my phone fell of the couch onto a rug - no big deal, so far it has survived much worse, but when I picked it up, the colors were all messed up - overly green and red. Tried restarting - no luck. Everything worked fine, except the colors, but then the screen turned of completely. I could hear notifications, phonecalls, but the screen was dead. After some tapping on the screen, it turned on again - with ****ed up colors. Then started flickering and was gone again. Few more times I could turn it on by tapping before it was dead for good.
Figured, after all these drops it survived, maybe the screen connector is a bit loose. I mean, I could sometime get a contact when tapping it, so I dissasambled it completely, secured all the connection, put it all back tougether and fired up - same thing: dead screen, phone working.
Has anyone had such problem before? Is it screen that is dead, or connector or... I have no clue... I would like try to fix it on my own, with some replacement parts I could get on ebay - but, what gave?

White lines on screen

I've owned this M9 for about a week now, its the AT&T variant. This is a 2nd line use phone and rarely sees much use so the white line issue occurred when phone was not in use.
This happened earlier today after being in my pocket for a hour or so, then phone sit on my desk for about an hour before I picked it back up and there was bad white lines running up and down the screen even in the boot animation. But then after about an hour they are now completely gone. I did see a few reddit posts about it but didnt see much info other than it went away.
Anyone else run into this? Any ideas?
I can still return the device which I may end up doing. Just was about to buy S-off today
Thanks!

It happened to me twice but lines used to vanish after about an hour. Honestly i don't know why but mine has almost 2 years.

It's hardware problem for sure. Either:
a) display screen defect
b) motherboard defect (GPU probably)
c) some loose connector (unlikely tbh..)

Screen Issues

Recently I returned my Razer because the vibration in my phone sounded horrible. Over two weeks later I got a replacement phone back and the vibration ended up sounding even worse than the first so I just assumed they're all this crappy. Then one day later after setting up my second Razer phone this happened.
The screen went black and clicking the power would vibrate but the screen wouldn't come on until eventually, it appeared as you can see in my screenshots. I managed to factory reset it and even after it still appears cut in half until finally, I was able to power it off again and restart, which after it seemed fine for a bit before the entire scenario replayed itself. Has anyone else experienced anything like this?

Obviously abnormal behavior. I'd try another rma

Can confirm that mine does a similar thing. Every now and again left half of the screen would freeze. It happens for a few seconds and comes back normally. I saw it first about a week ago, but thought it had to do with a specific app. Since then I had it happening in other apps and home screen.

Can't say I've seen this, and that's from 3 phones. Have yet to update to the new firmware yet though.

I have seen that with some company's laptops before and generally its had to be put down as Dead on Arrival as usually caused by some physical damage to the screen. With phones I cant say I have ever seen it happen on a small screen but certainly get it sent back as from 10 years in repairs I wouldn't see a software fix for that type of screen issue.

UPDATE
Mine went from having left side glitch occasionally to the who screen turning back every now an then. Left side is mostly frozen. On the bright side, I found that if you apply some light pressure to the middle of the bottom grill you can get the screen back pretty reliably. Judging by disassembly video it is where screen cable is bent to go under screen assembly, so it is probably result of some stress/tearing of that cable. Would explain partial malfunction as opposed to complete failure, but I can obviously be wrong.
Also, RMA was granted without a problem after we tried a factory reset with the tech.

RMA would be the best bet. I am surprised by the defective stories popping up, but at the same time I don't think I've even counted 100 people that have had a defect requiring an rma. And we know they sold at least 1,337 of the phones, so that's still a decent failure rate.. Though I think they need to revisit it and get that number lower.

yeah without question send it back to the store as dead on arrival or rma the phone - sooner its sent back the better with laptop screens doing this 9/10 times was the screen was broke and mainly a loose cable or dropped by the user. 1st 30 days or so the retailers and laptop manufacture could replace them but the longer it took to report it the more inclined to treat it as damage and not cover it under warranty.
Yes im comparing a phone screen to a laptop and normally a loose or damaged cable would show signs of this, Could be temperature related as well.

It was pretty much dead on arrival it's just annoying to have to go through another RMA and the whole 2-3 weeks before getting another replacement.
Also whoever mentioned squeezing the bottom speaker is correct that temporarily fixes the issue.

My Razer phone screen has failed
I've owned the Razer phone for less than two months. Yesterday, I went to wake the screen from sleep (press power button). The phone displayed random black and white bars pulsing across the entire screen. I was unable to interact with the phone while it was in this state. I restarted the phone by holding the power button and volume up at the same time. The phone restarted but the screen remained black ; the screen did not light up at all. The phone was in fact powered on and eventually the android "tic...tic...tic" sound played during device boot, when awaiting user input (android tic sounds played while awaiting password input during startup). While the speakers worked the the power led located in the bezel still lit, the screen remained OFF/dark. While continuing to hold the phone and move it around the screen finally lit. The left side of the screen appears "stuck" (does not refresh). Whatever was displayed on the screen when this condition occurs remains frozen on the left side of the phone. It's a perfect 50/50 split. In other words, the left 50% of the screen (portrait orientation) has a complete image "stuck" on the screen from whatever was displayed when the screen last froze (eventually it releases and then immediately freezes again). The frozen left side of the screen eventually updates as you continue to interact with the phone (this is NOT anything like burn-in). It's lit nice and bright but the left side of the screen appears to freeze and will not refresh while you interact with the device. The right side of the screen continues to update normally. I was able to capture a screenshot (power button + volume down) and confirmed the image captured does NOT reflect the display issue. This appears to be a hardware failure. Other Razer phone owners are reporting it and a video has been posted to YT demonstrating the "Razer phone screen problem?". Razer has offered an RMA however they DON'T afford advance RMA (you must ship your device to them, they receive it, then eventually ship a replacement). That's unacceptable for a $700 phone that took over a week to arrive because they shipped it from HK and got stuck in customs. Buyers beware, I would avoid this phone for now until the cause of this issue is identified OR Razer strengthens their replacement processes..
update/more info: I was able to complete a factory reset and the issue persists.
also, as another user stated above, pressing lightly and applying pressure around the edges or to the screen does appear to cause the screen to light back up again when it's dark (in other words the screen goes to black and will not wake. then when you apply some light pressure around the device it reliably lights the screen again; until the next failure which is moments later)

Hi my razer did up date swiched off and has never come back on dont even show charging has eny one els had this

I've got my Razer phone on the 20th of December 2017. Used it a couple of months before noticing the entire top part of the screen having dead zone. Rendering my phone to be unable to tap on anything on the dead zone. I've proceeded to exchange emails with Razer and got it RMA-ed on the 20th of March 2018. To my surprise. My 2nd set is experiencing the same exact issue right now in less than a month of using it. Are there anyone else out there experiencing this issue?

Got my razer phone on the 20th December, last month while using Google maps the left side froze for a bit, fixed it at the time with a reboot, didn't do it again till last week and now does it all the time. I'm waiting for an RMA guy from razer to email me back, and I've put a post on Reddit under the /r/razerphone sub to keep everyone interested how my RMA process is going to go. How long does it take to get your fixed/replacement phone back to you? If I dropped the phone and broke the screen, my insurance company would replace it and get it back to me within 5 days for £25 fee. I bet razer are gonna take weeks.... ?

razer screen problem
since i got the phone at the start the screen was flashing black then an hour later phone was all gucci,now if i press the side of the speaker like a small bit harder the whole screen goes black untill i manage to restart the phone, now at all i dunno whats happening nothing happens all i does it vibrates when i try to unlock the phone theres no sound anymore when the phone gets unlocked so im guessing i cant restart it anymore cause it dosent unlock :/
if you need any pictures / videos
Dm me on IG: Pekiuks_YT
discord : Pekiuks#7734
ok thanks , i should refund it or no because i need to factory reset it but i cant see anything cause the screen is black .

Anatoli
ZaccTeo said:
I've got my Razer phone on the 20th of December 2017. Used it a couple of months before noticing the entire top part of the screen having dead zone. Rendering my phone to be unable to tap on anything on the dead zone. I've proceeded to exchange emails with Razer and got it RMA-ed on the 20th of March 2018. To my surprise. My 2nd set is experiencing the same exact issue right now in less than a month of using it. Are there anyone else out there experiencing this issue?
Click to expand...
Click to collapse
Bought Razer in March. And now have same problem !

HTC 10 Half of Display Not Working After Screen Replacement

The battery on my HTC 10 was completely shot and needed to be replaced. I'm a careful person by nature and this being my first phone repair, I bought an extra screen just in case something happened getting it apart. Followed a guide by jerryrigeverything on how to take apart the phone, got the battery replaced, everything seemed to go smoothly. When I went to test the display before screwing everything together, the new screen I installed lit up, but the right half of the display only showed as a repeating segment from the middle of the screen. Thinking the connector was loose, I disconnected and reconnected the display and made sure everything was tight: same problem. I reinstalled the original display, which I made sure had worked after cutting through the adhesive before I disconnected it, and now the old display is also showing the same issue.
The touch screen on the broken side of the display still works, I'm able to type PIN numbers and whatnot even though I can't see them properly. Only thing I can think of is maybe the connection actually got some debris or something inside of it? I don't think I damaged anything, as I was super careful, but it was also my first time opening up a phone.
Sorry for the inefficiently worded post. Any help would be really appreciated.

Did you resolve this?
I have exactly the same issue you describe after my screen replacement (with two new screens) Believing the first was a dud.
I have done many screens/batteries on my m7, m8's previously never having a problem.
I'm currently back to running my M8 and miss my 10!
Anyone reading this and has any suggestions they are all welcome!!
Thank you in advance

Exactly the same issue this guy has
https://youtu.be/RpdCuMiTOn8
I'm now wondering if it is just bad aftermarket screens?
Has anyone else replaced their screen successfully, if so where did you get the screen?
Thanks Rory

I have been having the same problem. I just tested screen number 4 that has the same exact problem. Is there a specific brand that is known to test well?

I dropped my 10 in water at work...believe it was a salty water at that. It stopped working completely. I opened the phone to check the internal components for damage and I broke the LCD doing so. I replaced the battery and the screen at almost the same time. I think it may have been a week or two apart.
The battery is still working. The screen worked initially but the phone kept getting really hot and the heat kills the phone. I tried keeping it cool at all times which kept it operational. It hasn't been activated since I quickly replaced the phone with another of my lines upgrades. I went back to the phone to check it out and try using it as a replacement for my daughter but the screen no longer works.
The battery charges just fine...the led light indicates that well. I've tried reinstalling it several times with no success getting the screen working again. I tried the original screen to check and I could see light and it was responding but its not usable so I'm stuck with a phone that has a new non-working display. I think the brand was called DIYRepair or similar.
If anyone has encountered this and has advice...I'd be happy to try anything.

Possible faulty screen.

My screen seems to have developed a fault. A couple of days ago I left my phone fully working with no issues to charge overnight and in the morning when I picked it up the bottom 2 or 3cm of screen was black as if it was dead. Then over the course of a few minutes the bottom went from dead to static to lots of green and red dots to working fine. Except there are dark horizontal lines across the whole screen which are more noticeable when there is a light background. It seems like maybe a loose connection to the screen. But here's where it gets strange.
The lines are there every morning but by the middle of the afternoon the screen seems to be working perfectly with no lines at all. Has anyone got any idea what could be causing this?
The phone is still under warranty so I tried to return it for repair but when I went to the shop it was late afternoon and the phone looked to be working perfectly so they insisted there was no fault. Then the next morning same issue again but by the time I get to the shop the screen is fine again.
Sent from my Pixel 2 XL using Tapatalk

steevwatson said:
My screen seems to have developed a fault. A couple of days ago I left my phone fully working with no issues to charge overnight and in the morning when I picked it up the bottom 2 or 3cm of screen was black as if it was dead. Then over the course of a few minutes the bottom went from dead to static to lots of green and red dots to working fine. Except there are dark horizontal lines across the whole screen which are more noticeable when there is a light background. It seems like maybe a loose connection to the screen. But here's where it gets strange.
The lines are there every morning but by the middle of the afternoon the screen seems to be working perfectly with no lines at all. Has anyone got any idea what could be causing this?
The phone is still under warranty so I tried to return it for repair but when I went to the shop it was late afternoon and the phone looked to be working perfectly so they insisted there was no fault. Then the next morning same issue again but by the time I get to the shop the screen is fine again.
Click to expand...
Click to collapse
By chance, did you charge the phone while it was off?

Badger50 said:
By chance, did you charge the phone while it was off?
Click to expand...
Click to collapse
The phone was on and charging the first time it happened.
Sent from my Pixel 2 XL using Tapatalk

steevwatson said:
The phone was on and charging the first time it happened.
Click to expand...
Click to collapse
Ok. Thought you may have been experiencing some burn in with the charging while off bug. If the issue persists, I'd definitely request and RMA :good: