SOLVED SOLVED SOLVED
JUST FLASHED THIS BPH4 https://drive.google.com/file/d/0B_gPYnMt2KosdGxGQXY1bzFjSE0/view
---------------------------------------------------------------------
Guys, anyone knows how to come out from this? Please...
EDIT:
Here is what odin says.
<ID:0/009> Odin engine v(ID:3.1100)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Removed!!
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> RQT_CLOSE !!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
EDIT 2:
If i flash BL from N920AUCU1AOGG stock rom i receive
<ID:0/009> Odin engine v(ID:3.1100)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Can't open the specified file. (Line: 2012)
<OSM> All threads completed. (succeed 0 / failed 1)
EDIT 3:
Reflashed the same bl with the pit file from csc, and this..:
<ID:0/009> Odin engine v(ID:3.1100)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> param.bin
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Don't flash the bootloader.
Please help me, i bricked my phone
It doesn't go beyond, samsung logo,
I tried to flash OJ1 firmware again using Odin, then i tried to updraded but failed twice. Now i am unable to boot at all.
I am able go to download mode but can't go to recovery. even after reflashing stock rom i stuck in samsung logo and cn't go beyond and can't go to recovery. but able to go to download mode. Please help.
Please help me how can i repartition my At&T glaxy note 5 and get the PIT file and other stuff for AT&T version of note 5. I shall be very very thankful.
Please help .....what to do now.
dradil said:
Please help me, i bricked my phone
It doesn't go beyond, samsung logo,
I tried to flash OJ1 firmware again using Odin, then i tried to updraded but failed twice. Now i am unable to boot at all.
I am able go to download mode but can't go to recovery. even after reflashing stock rom i stuck in samsung logo and cn't go beyond and can't go to recovery. but able to go to download mode. Please help.
Please help me how can i repartition my At&T glaxy note 5 and get the PIT file and other stuff for AT&T version of note 5. I shall be very very thankful.
Please help .....what to do now.
Click to expand...
Click to collapse
Download the file i linked give a try
Kundinga said:
Download the file i linked give a try
Click to expand...
Click to collapse
Thank you so much. I have downloaded the file. and tried to update it and i was able to flash it and phone booted well, but it restarts again and again. it happens with all the file. Thank you so much for this atleast phone booted. I loaded all the 4 files except the PIT file.
Should i also try to load the PIT file? How to load a PIT file what should i do, should i check the partition option in ODIN with PIT file. What should i do, is it any solution? of this restart again and again, i also tried to wipe cache in recovery, now my phone is able to run into the recovery.
Thanks a million time.
dradil said:
Thank you so much. I have downloaded the file. and tried to update it and i was able to flash it and phone booted well, but it restarts again and again. it happens with all the file. Thank you so much for this atleast phone booted. I loaded all the 4 files except the PIT file.
Should i also try to load the PIT file? How to load a PIT file what should i do, should i check the partition option in ODIN with PIT file. What should i do, is it any solution? of this restart again and again, i also tried to wipe cache in recovery, now my phone is able to run into the recovery.
Thanks a million time.
Click to expand...
Click to collapse
Put every file in his right section and load the pit, in Odin there is a menu hidden by a button on the left, one of the three let you load the pit (now I don't remember very well the interface hahah give a try)
Kundinga said:
Put every file in his right section and load the pit, in Odin there is a menu hidden by a button on the left, one of the three let you load the pit (now I don't remember very well the interface hahah give a try)
Click to expand...
Click to collapse
Thank you once agian for the reply.
Should i check the "re-partition option" after loading the PIT and then Start?
Related
after flashing the repencis v2.6pro it got stuck in boot screen and it wont go to recovery and i am not able to flash it with odin v1.85 it comes like this
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i did it with the dokey's kies broken frimware specified in his thread
plz help
vllskumar said:
after flashing the repencis v2.6pro it got stuck in boot screen and it wont go to recovery and i am not able to flash it with odin v1.85 it comes like this
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i did it with the dokey's kies broken frimware specified in his thread
plz help
Click to expand...
Click to collapse
Try another version. Make sure your phone is in download mode using Vol down+Home key+Power key. Flash it when the COM box is lit up after selecting PDA, Phone and CSC. Try Odin v1.84 if v1.85 fails.
raolemo said:
Try another version. Make sure your phone is in download mode using Vol down+Home key+Power key. Flash it when the COM box is lit up after selecting PDA, Phone and CSC. Try Odin v1.84 if v1.85 fails.
Click to expand...
Click to collapse
Try pressing Ctrl+Alt+Delete and go to "Processes" and search for the following process :"KiesTrayAgent.exe","Kies.exe","adb.exe"
If you seen that all in the processes of your PC/Laptop , Make sure to end that all process before proceeding up with Mr.Odin
Because mine i've flashed my DXLA1 Firmware because i always encountering SD Card issues so i ended up downgrading my DXLA1 to my Factory Firmware DXKK4
In this way , Mr.Odin helped me
vllskumar said:
after flashing the repencis v2.6pro it got stuck in boot screen and it wont go to recovery and i am not able to flash it with odin v1.85 it comes like this
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i did it with the dokey's kies broken frimware specified in his thread
plz help
Click to expand...
Click to collapse
install some other version... kill kies / adb processes... make sure ur cable is fine
got it right
there was some problem with the kies splitted files so downloaded the firmware from from another source n now got it working thx guyz
I recently found out I soft bricked my phone after browsing through the forums. I looked up for the solution and it turns out that I need to reset it back, no problem with that so I installed odin back again (I rooted my phone before so I had it). I first downloaded the official firmware from sammobile or some site like that and I downloaded a PIT file for my phone because the tutorial said it was essential when resetting a smartphone. I followed every step but when I launch odin and select the required tick boxes and the PDA PITi I start it. It starts up but in the middle of the loading I shows up the DO NOT TURN OFF THE TARGET!!! message and It stops.
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is the error and I can't seem tı get past it. I really need to deal with this quickly so if any of you have a solution, ı would appreciate it. Thanks
Anyone has the same issue? I need to fix this ASAP.
a
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
Now the error goes like this and nothing more.
aqertmen said:
Anyone has the same issue? I need to fix this ASAP.
Click to expand...
Click to collapse
I'm getting the exact same problem, can't fix it
Have you made any progress?
Thanks.
aqertmen said:
I recently found out I soft bricked my phone after browsing through the forums. I looked up for the solution and it turns out that I need to reset it back, no problem with that so I installed odin back again (I rooted my phone before so I had it). I first downloaded the official firmware from sammobile or some site like that and I downloaded a PIT file for my phone because the tutorial said it was essential when resetting a smartphone. I followed every step but when I launch odin and select the required tick boxes and the PDA PITi I start it. It starts up but in the middle of the loading I shows up the DO NOT TURN OFF THE TARGET!!! message and It stops.
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is the error and I can't seem tı get past it. I really need to deal with this quickly so if any of you have a solution, ı would appreciate it. Thanks
Click to expand...
Click to collapse
doc1975 said:
I'm getting the exact same problem, can't fix it
Have you made any progress?
Thanks.
Click to expand...
Click to collapse
Hi
Do you have a custom recovery?
Which phonemodel do you have?
U can install TWRP through Odin using a tar file. Go to TWRP and search your model, get the tar file and install it.
From TWRP u can sideload a rom using ADB.
You can push files to the phone using it, that way u can push the rom to the phone and install it through TWRP.
A long way around but worth trying when all else fail.
Hi to all,
I tried to update the note 2 to the 4.3 version (india one). The rom flashing wasn't finished (it taken a lot of time, more than 1 hour and the laptop battery discharged).
Now when i switch on the note 2, it shows me the error: " firmware upgrade encountered"
I think it loaded the new bootloader, in fact if i boot my note in recovery mode it shows me "knox warranty void: 1".
I tried to flash the cwm recovery and now i'm able to boot it in recovery mode but i'm not able to mount the sd card (it mounts only as usb storage, not in the other mode).
I tried to flash the note 2 with:
- the factory rom: N7100XXDMB2_N7100OXADMA5_N7100XXDLK7_FACTORY_XEF.TAR
- using PIT: PIT_N7100_16GB_20121102.pit
but odin shows me this error:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and on my note 2 there is an error: "unsupported version"
what can i do?
thanks
19malag83 said:
Hi to all,
I tried to update the note 2 to the 4.3 version (india one). The rom flashing wasn't finished (it taken a lot of time, more than 1 hour and the laptop battery discharged).
Now when i switch on the note 2, it shows me the error: " firmware upgrade encountered"
I think it loaded the new bootloader, in fact if i boot my note in recovery mode it shows me "knox warranty void: 1".
I tried to flash the cwm recovery and now i'm able to boot it in recovery mode but i'm not able to mount the sd card (it mounts only as usb storage, not in the other mode).
I tried to flash the note 2 with:
- the factory rom: N7100XXDMB2_N7100OXADMA5_N7100XXDLK7_FACTORY_XEF.TAR
- using PIT: PIT_N7100_16GB_20121102.pit
but odin shows me this error:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and on my note 2 there is an error: "unsupported version"
what can i do?
thanks
Click to expand...
Click to collapse
Can you try formating SD card from recovery, i understand you are not able to mount but worth a try... i could format my ext sd card when i could not mount it
ameyamg said:
Can you try formating SD card from recovery, i understand you are not able to mount but worth a try... i could format my ext sd card when i could not mount it
Click to expand...
Click to collapse
Yes i' able to format it. Just do it. But after that, i'm not able to mount it.
I made a search, and i read that it could be a cwm recovery problem. I have to try with another recovery
Hey you wanted to upgrade right? So why don't you just flash that stock 4.3 mk4/mk3 rom with the new bootloader..? Because you already have the new bootloader, you can't do anything about it now...until dr ketan finds a way to downgrade
Sent from my GT-N7100 using XDA Premium 4 mobile app
manan999583 said:
Hey you wanted to upgrade right? So why don't you just flash that stock 4.3 mk4/mk3 rom with the new bootloader..? Because you already have the new bootloader, you can't do anything about it now...until dr ketan finds a way to downgrade
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes, it is what i'd like to do. But i'm not able. If i try to do it, odin shows me this error:
imageshack.us/photo/my-images/200/4nxc.png (add http before, sorry but i'm not able to insert a pic or a link because i have less then 10 posts )
UPDATE: using windows XP i wasn't able to flash the 4.3 rom. I try with Windows 7 and it works
I had to get my S3 Jtagged as a result of flashing the wrong bootloader. When I received the S3 after it had been Jtagged the imei and baseband had been erased, I tried to flash it back to stock via odin and got the following"<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> aboot.mbn
<ID:0/011> NAND Write Start!!
<ID:0/011> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)"
Can anyone help me?
purelight97 said:
I had to get my S3 Jtagged as a result of flashing the wrong bootloader. When I received the S3 after it had been Jtagged the imei and baseband had been erased, I tried to flash it back to stock via odin and got the following"<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> aboot.mbn
<ID:0/011> NAND Write Start!!
<ID:0/011> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)"
Can anyone help me?
Click to expand...
Click to collapse
What type of S3? i747?, If so download this https://mega.co.nz/#!ot93EJCb!k9p5tBXX9fVlBhpjCBHfArqsMI3xRcEC6QrjHH2jB0Y USE ODIN 3.09 ONLY. Match each section with each file, and then check repartition. The only things that should be checked, are AutoReboot Repartition and F.Reset Time.
Hope this helps.
DanteDFG said:
What type of S3? i747?, If so download this https://mega.co.nz/#!ot93EJCb!k9p5tBXX9fVlBhpjCBHfArqsMI3xRcEC6QrjHH2jB0Y USE ODIN 3.09 ONLY. Match each section with each file, and then check repartition. The only things that should be checked, are AutoReboot Repartition and F.Reset Time.
Hope this helps.
Click to expand...
Click to collapse
Thanks for the reply, but what do you mean by match each section with each file? Also I extracted the zip file and I got 4 .tar files, which should I flash?
purelight97 said:
Thanks for the reply, but what do you mean by match each section with each file? Also I extracted the zip file and I got 4 .tar files, which should I flash?
Click to expand...
Click to collapse
Use all 4 files. Use PIT . PIT Ap in Ap Bl in BL CSC in Csc and Cp in Cp and let it all flash at once, with only Repartion, AutoReboot and F.reset time checked
Edit:
PROBLEM SOLVED
Hope someone can help me
phone: note 2 GT-N7105
OS: windows 10 64bit/windows 7 64 bit
tried with several odins 3.04, 3.10.7, 3.07, 3.09, 3.11.1, 3.12.3, 3.10.6, 3.10.7
2 PIT files
-T0LTE_EUR_OPEN_8G.pit
-N7105_t0_Mx-MDM.pit
full 4 files: N7105ZHUEMK3
one tar file: N7105XXUFOB2_N7105OLBFOD1_N7105XXUFNI2_HOME.tar.md5
My phone can go into recovery and download mode.
Cannot clear cache or data in recovery mode as mount or read error occur
When flash in odin, re-parition operating error
Is there anyway to flash from sd card or anything like that?
Hope someone kindly shed the light.
Thank you!
Error without PIT file
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Error with PIT file
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried different usb cables and usb ports?
audit13 said:
Tried different usb cables and usb ports?
Click to expand...
Click to collapse
Yes different ports
Yes different usb cable but none are samsung's cable though. thanks.
Btw, firmware and pit file must be the same or doesn't need to be?
PIT file is only matter for the model?
Thanks.
The pit file must match the model number and amount of memory.
Do you get pit error when trying to flash without the pit file?
audit13 said:
The pit file must match the model number and amount of memory.
Do you get pit error when trying to flash without the pit file?
Click to expand...
Click to collapse
No, I didn't get PIT error without PIT file.
In my experience, pit files are only required if Odin is not able to pull the partition information from the phone during the flash process.
You might want to look into having the phone flashed via jtag.