Develop Bugs

Stuck on samsung screen and failed to mount /efs, /cache system...

Hello,
I have a galaxy note 2.
I am currently having big issues :
The phone get stuck on samsung galaxy note 2 screen
When I press Start / volume Up and Home, i get to this recovery mode where it says that /efs canno't be mount, same with /cache and /system (if i remember)
E: failed to mount /efs (No such file or directory)
E: failed to mount /system (No such file or directory)
E: failed to mount /cache (No such file or directory)
#MANUAL MODE #
--Applying Multi-CSC...
Applied the CSC-code: unknown
Successfully applied multi-CSC
I tried wipe / reset to factory option but it not working
For the historic, what I did on this phone :
1. I rooted it with odin CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5
2. Everything was fine during 1 year, then i had issue (phone crashing, settings reseting to default), so i decided to update the rom with the official one N7100XXUFND3_N7100OXAFND3_N7100XXUFND3_HOME.tar.md5
3. Since yesterday night the phone is stuck on home
4. I try to reflash with odin with the offical rom and i get this error
ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
I still have a backup of the EFS, i read that i should restore the EFS but I can't do it with ADB because when i type root shell in adb it says : "error : device not found" (I am in download mode though)
Thank you for your help

will kies help?

䙉ʐû said:
will kies help?
Click to expand...
Click to collapse
Hello, thank for your answer
Kies, doesn't detect my phone... I success to download the firmware with Kies but then it says that my phone is not accessible.
Odin detects my phone though.
I have installed samsung drivers,

Side54723 said:
Hello, thank for your answer
Kies, doesn't detect my phone... I success to download the firmware with Kies but then it says that my phone is not accessible.
Odin detects my phone though.
I have installed samsung drivers,
Click to expand...
Click to collapse
I have windows 8 by the way !

Side54723 said:
I have windows 8 by the way !
Click to expand...
Click to collapse
maybe you can try to flash a third-party recovery like CWM with odin and watch if it flashed successfully and if you can enter recovery. the recovery file is a normal tar.md5 which can be flashed like stock firmware.Drivers works well under windows 8 8.1even the newest windows10 tp

䙉ʐû said:
maybe you can try to flash a third-party recovery like CWM with odin and watch if it flashed successfully and if you can enter recovery. the recovery file is a normal tar.md5 which can be flashed like stock firmware.Drivers works well under windows 8 8.1even the newest windows10 tp
Click to expand...
Click to collapse
Where can i download it ? I have a french galaxy note 2 7100
Thank you,

Side54723 said:
Where can i download it ? I have a french galaxy note 2 7100
Thank you,
Click to expand...
Click to collapse
I tried to flash with CWM and odin fails on WIN7
The icon is blue (0:[COM8)
I selected "Note2-CWM-6.0.4.3-GT-N7100.tar" in PDA
<ID:0/008> Added!!
<ID:0/008> Removed!!
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks for help

Side54723 said:
Where can i download it ? I have a french galaxy note 2 7100
Thank you,
Click to expand...
Click to collapse
You can search for it in the N7100 Android Development Forum ，there are many excellent recovery like CWM ，Philz and TWRP.Most of them work well on international N7100
---------- Post added at 11:14 AM ---------- Previous post was at 11:04 AM ----------
Side54723 said:
I tried to flash with CWM and odin fails on WIN7
The icon is blue (0:[COM8)
I selected "Note2-CWM-6.0.4.3-GT-N7100.tar" in PDA
<ID:0/008> Added!!
<ID:0/008> Removed!!
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks for help
Click to expand...
Click to collapse
Make sure you have a good cable and use back USB(2.0) port if you are using a desktop.Maybe youcan try another recovery file and flash as many times as you can(someone said it would work)

䙉ʐû said:
You can search for it in the N7100 Android Development Forum ，there are many excellent recovery like CWM ，Philz and TWRP.Most of them work well on international N7100
---------- Post added at 11:14 AM ---------- Previous post was at 11:04 AM ----------
Make sure you have a good cable and use back USB(2.0) port if you are using a desktop.Maybe youcan try another recovery file and flash as many times as you can(someone said it would work)
Click to expand...
Click to collapse
Hello,
I tried CWM and philz with ODIN.
Maybe i should try from SD CARD ?
I changed 3 usb cable and I am using USB 2.0 (LAPTOP)

Side54723 said:
Hello,
I tried CWM and philz with ODIN.
Maybe i should try from SD CARD ?
I changed 3 usb cable and I am using USB 2.0 (LAPTOP)
Click to expand...
Click to collapse
That means you cant flash recovery either?

䙉ʐû said:
That means you cant flash recovery either?
Click to expand...
Click to collapse
I tried flashing with philz recovery, cwm, by odin or by sd card.
The sd card is not recognized (even after repartition it) => /Sdcard canno't be mount and i can't see any files
I also tried to update the rom + pit + repartition mais still failing in odin

hi,
i also have similar problem with my N7100.
phone stuck in Samsung GT-N7100 logo.
unable to go to Recovery Mode, but download mode OK.
tried to flash Stock Firmware with Odin, but failed
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFNI4_N7100OLBFNI1_N7100DXUFNI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
tried to flash PhilZ Touch 6 Recovery, but failed. :crying:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
from the log, it seem like Odin unable to write. anyone know whats the problem?
tried swap battery with friends, friends phone work well with my battery, but mine still the same even with my friends battery.

Side54723 said:
Hello,
I have a galaxy note 2.
I am currently having big issues :
The phone get stuck on samsung galaxy note 2 screen
When I press Start / volume Up and Home, i get to this recovery mode where it says that /efs canno't be mount, same with /cache and /system (if i remember)
E: failed to mount /efs (No such file or directory)
E: failed to mount /system (No such file or directory)
E: failed to mount /cache (No such file or directory)
#MANUAL MODE #
--Applying Multi-CSC...
Applied the CSC-code: unknown
Successfully applied multi-CSC
I tried wipe / reset to factory option but it not working
For the historic, what I did on this phone :
1. I rooted it with odin CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5
2. Everything was fine during 1 year, then i had issue (phone crashing, settings reseting to default), so i decided to update the rom with the official one N7100XXUFND3_N7100OXAFND3_N7100XXUFND3_HOME.tar.md5
3. Since yesterday night the phone is stuck on home
4. I try to reflash with odin with the offical rom and i get this error
ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
I still have a backup of the EFS, i read that i should restore the EFS but I can't do it with ADB because when i type root shell in adb it says : "error : device not found" (I am in download mode though)
Thank you for your help
Click to expand...
Click to collapse
Do these at your own risk.
search for PIT file made by dr ketan and flash it together with the stock n7100 firmware in odin. that will solve tour problem.
somebody posted pit file here.. be sure that your n7100 is 16gb
http://forum.xda-developers.com/show....php?t=1927983
extract it and use that together with the stock firmware in odin. select pit for pit files and pda for stock firmware
after finish flashing it will be stuck again in samsung logo. boot again to recovery mode and wipe data/reset to factory mode and then reboot

[Q] Sprint Samsung Note 2, boot Loop after NK2 OTA , L900VPUCNK2

Hi,
My samsung note 2 (sprint) was NOT rooted, I got the latest OTA update (NK2) the phone run out of charge and got stuck on boot loop ( samsung note II screen), it wont charge ( it shows battery but no progress). I tried a different battery but did not help.
I went to recovery to do "wipe data/factory" and "wipe cache partition" but there was a lot of error messages ( e:failed to mount /cache no such files or directory)
I tried to flash a stock rom (NE2) from rwilco12.com using odin 3.09 but Odin failed:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Anyone knows how to fix this?
Should I flash a custom recovery?
Any help will be VERY appreciated !!!!!
H

hamdiAndroid said:
My samsung note 2 (sprint) was NOT rooted, I got the latest OTA update (NK2) the phone run out of charge and got stuck on boot loop...
Click to expand...
Click to collapse
I just posted a thread that can help you. Please see the section on soft brick after NE2 to NK2 update. Follow the instructions and you'll be fine. See it here:
http://forum.xda-developers.com/note-2-sprint/general/how-to-root-nk2-fix-boot-loop-ne2-to-t3049036
Good luck!

Unroot... I'm going to lose my mind!

I've been searching the forums for 3 hours and it's gotten me nowhere.
I am trying to unroot my Note 4. Here are system specs and what I've tried:
Device Model: SM-N910P
PAC version: LP Beta-1 Nightly
Android Version: 5.0.2
Baseband version: N910PVPU2BOE1
I have tried to unroot with BOB7 using both Odin 3.07 and 3.09. Both times I get the error message on ODIN:
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
And on the phone:
sw rev check fail : [aboot]fused 2 > binary 1
[1] eMMC write fail: ABOOT
I have tried rerooting then using Odin to the same result. I am currently downloading ANIE to try that.
I have also tried swearing loudly, promised to throw virgins into a volcano to whatever deity will listen, promised my phone sexual favors and/or savage beatings, and I've consumed some whiskey.
What am I doing wrong?

U have to use a oe1 tar file and use odin you cant oding back to bob7 now that u have oe1 once u odin backto stock oel then you will be root less be careful that tar with most likely wipe internal info make sure u do a backup
Sent from my SM-N910P using Tapatalk

That's all I was missing?
OK, thanks!
Now where do I get an oe1?

JQuinnC said:
That's all I was missing?
OK, thanks!
Now where do I get an oe1?
Click to expand...
Click to collapse
The latest is OJ6. You can find it here :
http://forum.xda-developers.com/showthread.php?t=3250864

JQuinnC said:
That's all I was missing?
OK, thanks!
Now where do I get an oe1?
Click to expand...
Click to collapse
Use OJ6 tar (latest☺). You'll find it in Sprint Note 4 general forum.
Backup what you want to keep, wipe everything but extSdCard. Delete the Android folder on extSdCard. Power down and pull battery for at least 30 seconds before going to download mode. Use latest Odin with defaults, let it boot and run the setup wizard.
Sent from my SM-N910P using Tapatalk

Soft brick, sw rev check fail, can't flash bl

SOLVED SOLVED SOLVED
JUST FLASHED THIS BPH4 https://drive.google.com/file/d/0B_gPYnMt2KosdGxGQXY1bzFjSE0/view
---------------------------------------------------------------------
Guys, anyone knows how to come out from this? Please...
EDIT:
Here is what odin says.
<ID:0/009> Odin engine v(ID:3.1100)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Removed!!
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> RQT_CLOSE !!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
EDIT 2:
If i flash BL from N920AUCU1AOGG stock rom i receive
<ID:0/009> Odin engine v(ID:3.1100)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Can't open the specified file. (Line: 2012)
<OSM> All threads completed. (succeed 0 / failed 1)
EDIT 3:
Reflashed the same bl with the pit file from csc, and this..:
<ID:0/009> Odin engine v(ID:3.1100)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> param.bin
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Don't flash the bootloader.

Please help me, i bricked my phone
It doesn't go beyond, samsung logo,
I tried to flash OJ1 firmware again using Odin, then i tried to updraded but failed twice. Now i am unable to boot at all.
I am able go to download mode but can't go to recovery. even after reflashing stock rom i stuck in samsung logo and cn't go beyond and can't go to recovery. but able to go to download mode. Please help.
Please help me how can i repartition my At&T glaxy note 5 and get the PIT file and other stuff for AT&T version of note 5. I shall be very very thankful.
Please help .....what to do now.

dradil said:
Please help me, i bricked my phone
It doesn't go beyond, samsung logo,
I tried to flash OJ1 firmware again using Odin, then i tried to updraded but failed twice. Now i am unable to boot at all.
I am able go to download mode but can't go to recovery. even after reflashing stock rom i stuck in samsung logo and cn't go beyond and can't go to recovery. but able to go to download mode. Please help.
Please help me how can i repartition my At&T glaxy note 5 and get the PIT file and other stuff for AT&T version of note 5. I shall be very very thankful.
Please help .....what to do now.
Click to expand...
Click to collapse
Download the file i linked give a try

Kundinga said:
Download the file i linked give a try
Click to expand...
Click to collapse
Thank you so much. I have downloaded the file. and tried to update it and i was able to flash it and phone booted well, but it restarts again and again. it happens with all the file. Thank you so much for this atleast phone booted. I loaded all the 4 files except the PIT file.
Should i also try to load the PIT file? How to load a PIT file what should i do, should i check the partition option in ODIN with PIT file. What should i do, is it any solution? of this restart again and again, i also tried to wipe cache in recovery, now my phone is able to run into the recovery.
Thanks a million time.

dradil said:
Thank you so much. I have downloaded the file. and tried to update it and i was able to flash it and phone booted well, but it restarts again and again. it happens with all the file. Thank you so much for this atleast phone booted. I loaded all the 4 files except the PIT file.
Should i also try to load the PIT file? How to load a PIT file what should i do, should i check the partition option in ODIN with PIT file. What should i do, is it any solution? of this restart again and again, i also tried to wipe cache in recovery, now my phone is able to run into the recovery.
Thanks a million time.
Click to expand...
Click to collapse
Put every file in his right section and load the pit, in Odin there is a menu hidden by a button on the left, one of the three let you load the pit (now I don't remember very well the interface hahah give a try)

Kundinga said:
Put every file in his right section and load the pit, in Odin there is a menu hidden by a button on the left, one of the three let you load the pit (now I don't remember very well the interface hahah give a try)
Click to expand...
Click to collapse
Thank you once agian for the reply.
Should i check the "re-partition option" after loading the PIT and then Start?

Verizon Note 7 Bricked?

I was trying to root my phone using the "Sprint Method" and couldn't get the Sprint or Verizon firmware to flash correctly
I was getting this error
Code:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> xbl.elf
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I had USB Debugging and OEM Unlocking enabled (Tried with OEM Unlocking disabled also)
Now the phone won't boot at all. I have tried to Factory reset it and get no errors BUT I'm stuck at the Boot logo forever (left it for ~2 hours)
I don't know if it matters but since the phone doesn't boot anymore so I cant enable OEM Unlocking again
Sorry if i'm being an idiot i'm new to this

Blake__ said:
I was trying to root my phone using the "Sprint Method" and couldn't get the Sprint or Verizon firmware to flash correctly
I was getting this error
Code:
Added!!
Odin engine v(ID:3.1203)..
File analysis..
SetupConnection..
Initialzation..
Set PIT file..
DO NOT TURN OFF TARGET!!
Get PIT for mapping..
Firmware update start..
SingleDownload.
emmc_appsboot.mbn
lksecapp.mbn
xbl.elf
FAIL! (Auth)
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
I had USB Debugging and OEM Unlocking enabled (Tried with OEM Unlocking disabled also)
Now the phone won't boot at all. I have tried to Factory reset it and get no errors BUT I'm stuck at the Boot logo forever (left it for ~2 hours)
I don't know if it matters but since the phone doesn't boot anymore so I cant enable OEM Unlocking again
Sorry if i'm being an idiot i'm new to this
Click to expand...
Click to collapse
as you found....this doesnt work anymore...hasnt worked in months. do you guys not read anything ever before just flashing stuff lol?
you should be able to boot into download mode and flash the stock firmware to get your device working again at least
Sent from my SM-N930W8 using Tapatalk 2

force70 said:
as you found....this doesnt work anymore...hasnt worked in months. do you guys not read anything ever before just flashing stuff lol?
you should be able to boot into download mode and flash the stock firmware to get your device working again at least
Sent from my SM-N930W8 using Tapatalk 2
Click to expand...
Click to collapse
All the tutorials I found and all the youtube videos never said this doesnt work...
Tried flashing stock firmware, It gives the same error. Maybe I have the wrong firmware or something? Can you give a link to the current firmware?

Blake__ said:
All the tutorials I found and all the youtube videos never said this doesnt work...
Tried flashing stock firmware, It gives the same error. Maybe I have the wrong firmware or something? Can you give a link to the current firmware?
Click to expand...
Click to collapse
trust me you dont want the current firmware unless you like only charging to 60% lol!
if you have a CAN model like mine you want the PI3 firmware..

force70 said:
trust me you dont want the current firmware unless you like only charging to 60% lol!
if you have a CAN model like mine you want the PI3 firmware..
Click to expand...
Click to collapse
I managed to flash the original firmware using the Verizon software recovery thing. During first boot I was also able to skip/cancel updates so now my note is running without any limits and updates disabled via Package Disabler