Hi,
My samsung note 2 (sprint) was NOT rooted, I got the latest OTA update (NK2) the phone run out of charge and got stuck on boot loop ( samsung note II screen), it wont charge ( it shows battery but no progress). I tried a different battery but did not help.
I went to recovery to do "wipe data/factory" and "wipe cache partition" but there was a lot of error messages ( e:failed to mount /cache no such files or directory)
I tried to flash a stock rom (NE2) from rwilco12.com using odin 3.09 but Odin failed:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Anyone knows how to fix this?
Should I flash a custom recovery?
Any help will be VERY appreciated !!!!!
H
hamdiAndroid said:
My samsung note 2 (sprint) was NOT rooted, I got the latest OTA update (NK2) the phone run out of charge and got stuck on boot loop...
Click to expand...
Click to collapse
I just posted a thread that can help you. Please see the section on soft brick after NE2 to NK2 update. Follow the instructions and you'll be fine. See it here:
http://forum.xda-developers.com/note-2-sprint/general/how-to-root-nk2-fix-boot-loop-ne2-to-t3049036
Good luck!
Related
Hi to all,
I tried to update the note 2 to the 4.3 version (india one). The rom flashing wasn't finished (it taken a lot of time, more than 1 hour and the laptop battery discharged).
Now when i switch on the note 2, it shows me the error: " firmware upgrade encountered"
I think it loaded the new bootloader, in fact if i boot my note in recovery mode it shows me "knox warranty void: 1".
I tried to flash the cwm recovery and now i'm able to boot it in recovery mode but i'm not able to mount the sd card (it mounts only as usb storage, not in the other mode).
I tried to flash the note 2 with:
- the factory rom: N7100XXDMB2_N7100OXADMA5_N7100XXDLK7_FACTORY_XEF.TAR
- using PIT: PIT_N7100_16GB_20121102.pit
but odin shows me this error:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and on my note 2 there is an error: "unsupported version"
what can i do?
thanks
19malag83 said:
Hi to all,
I tried to update the note 2 to the 4.3 version (india one). The rom flashing wasn't finished (it taken a lot of time, more than 1 hour and the laptop battery discharged).
Now when i switch on the note 2, it shows me the error: " firmware upgrade encountered"
I think it loaded the new bootloader, in fact if i boot my note in recovery mode it shows me "knox warranty void: 1".
I tried to flash the cwm recovery and now i'm able to boot it in recovery mode but i'm not able to mount the sd card (it mounts only as usb storage, not in the other mode).
I tried to flash the note 2 with:
- the factory rom: N7100XXDMB2_N7100OXADMA5_N7100XXDLK7_FACTORY_XEF.TAR
- using PIT: PIT_N7100_16GB_20121102.pit
but odin shows me this error:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and on my note 2 there is an error: "unsupported version"
what can i do?
thanks
Click to expand...
Click to collapse
Can you try formating SD card from recovery, i understand you are not able to mount but worth a try... i could format my ext sd card when i could not mount it
ameyamg said:
Can you try formating SD card from recovery, i understand you are not able to mount but worth a try... i could format my ext sd card when i could not mount it
Click to expand...
Click to collapse
Yes i' able to format it. Just do it. But after that, i'm not able to mount it.
I made a search, and i read that it could be a cwm recovery problem. I have to try with another recovery
Hey you wanted to upgrade right? So why don't you just flash that stock 4.3 mk4/mk3 rom with the new bootloader..? Because you already have the new bootloader, you can't do anything about it now...until dr ketan finds a way to downgrade
Sent from my GT-N7100 using XDA Premium 4 mobile app
manan999583 said:
Hey you wanted to upgrade right? So why don't you just flash that stock 4.3 mk4/mk3 rom with the new bootloader..? Because you already have the new bootloader, you can't do anything about it now...until dr ketan finds a way to downgrade
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes, it is what i'd like to do. But i'm not able. If i try to do it, odin shows me this error:
imageshack.us/photo/my-images/200/4nxc.png (add http before, sorry but i'm not able to insert a pic or a link because i have less then 10 posts )
UPDATE: using windows XP i wasn't able to flash the 4.3 rom. I try with Windows 7 and it works
So, I've recently wanted to use a custom ROM for my phone, and I have done this before, but there's a bunch of changes I guess. I thought that "unified s3" meant that the ATT variants and others (including my i747m) would be compatible, so I tried to flash "Liquid Smooth v3.0" ROM but it didn't work with TWRP. So I got CWM and restored my phone (also my restore file by accident) so my phone was totally wiped, but I could flash the ROM. The problem occurs here, the phone WILL NOT boot, it is stuck at the "Samsung Galaxy S III" splash and won't go past it. I cannot delete the cache or anything without the phone restarting itself. I tried to flash a modem with Odin but get an error also.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
I've been searching the forums for a way to fix my i747m but I cannot find anything. Any solutions or is my phone dead. Also I can get into both recovery and download screen. I cannot flash a stock ROM because another error pops up. And when I go into download mode and flash, the "QUALCOMM SECUREBOOT: ENABLE" turns into "SECURE CHECK FAIL : aboot"
Tonamon said:
So, I've recently wanted to use a custom ROM for my phone, and I have done this before, but there's a bunch of changes I guess. I thought that "unified s3" meant that the ATT variants and others (including my i747m) would be compatible, so I tried to flash "Liquid Smooth v3.0" ROM but it didn't work with TWRP. So I got CWM and restored my phone (also my restore file by accident) so my phone was totally wiped, but I could flash the ROM. The problem occurs here, the phone WILL NOT boot, it is stuck at the "Samsung Galaxy S III" splash and won't go past it. I cannot delete the cache or anything without the phone restarting itself. I tried to flash a modem with Odin but get an error also.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
I've been searching the forums for a way to fix my i747m but I cannot find anything. Any solutions or is my phone dead. Also I can get into both recovery and download screen. I cannot flash a stock ROM because another error pops up. And when I go into download mode and flash, the "QUALCOMM SECUREBOOT: ENABLE" turns into "SECURE CHECK FAIL : aboot"
Click to expand...
Click to collapse
Since you can get into both download and recovery modes, there is plenty of hope and your phone is far from dead. Odin probably failed because you were trying to flash incompatible firmware or one that involved a bootloader downgrade attempt. You may be able to recover by re-flashing the correct firmware from (custom) recovery. You need to provide more information including what stock were you on before going custom and what stock you are now trying to revert to. When flashing stock firmware, however, you need to be sure you are working with the right ones. In spite of the near similarity in the names, firmware for the i747U... (AT&T) is different from the Canadian versions (i747M...) and you should be careful to pick only the ones specific to your phone model. You probably were on a 4.3 bootloader so your safest bet now may be to search for and download the i747M 4.3 stock rom, bootloader/modem and kernel zips and reflash these via recovery. If you are on TWRP, you may also do an advance wipe to remove all existing firmware before flashing new ones.
hey i have a rom installed on my note 2 n7100 model running v4.3 .... the rom is running but i found that i don't have a recovery mod [no philz/twrp].. i used to have philz but suddenly when the rom is flashed the recovery mod has gone
how can i get a recovery mod???
flashing recovery via odin didn't work and always failing
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
aboalghool said:
hey i have a rom installed on my note 2 n7100 model running v4.3 .... the rom is running but i found that i don't have a recovery mod [no philz/twrp].. i used to have philz but suddenly when the rom is flashed the recovery mod has gone
how can i get a recovery mod???
flashing recovery via odin didn't work and always failing
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
and other times odin stops responding,.,, im afraid my phone would get bricked every time i do this
You might have to flash a rom that includes the pit file it sounds like yours I'd corrupt. I think there is a rescue package on mskips toolkit
Sent from my GT-N7105 using Tapatalk
Hello guys,
I have a semi-bricked GT-N7100 ( international ) note 2. its not booting and it stucks on samsung logo. i can access to download and recovery mode. the device wasnt rooted and it always used in stock rom. i didn't even access to recovery and download mode before this brick. i dont know why this happened cos i wasnt the one using it.
In recovery mode , i encounter with these errors;
failed to mount /efs ( no such file or directory)
failed to mount /system ( no such file or directory)
failed to mount /cache ( no such file and directory)
when i do wipe and cache it says its completed but it gives more error while doing it.
in download mode i can see the product name. so i think that mainboard is ok.
PRODUCT NAME : GT-N7100
CURRENT BINARY: Samsung Offical
SYSTEM STATUS: Official
KNOX WARRANT VOID: 0
AP SWREV: A2
So, i have downloaded odin 1.85 and some other versions and tried to flash with stock rom. but it always fails.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
when i try to flash pit,
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i get these errors.
ive also tried to root with cwm and it gives same nand error. i tried to use kies to fix it by writing serial number but it doesnt recognize the device. ive read a lot of topics in various forums but couldn't find a solution. if you can help me it will be much appreciated, thank you in advance.
Bro what i suggest is flash the stock rom with the pit file n check the options repartition and nand erase all in odin. If it flashes successfully do a facrory reset. Make sure you have the correct pit file. If you have n7100 16 gb i can give 1 for you.
im not sure if device is 16gb but ive used the pit file that ive found in this forum for 16gb. i dont have any information about its gigabyte but its higher chance that its 16gb.
it gave this error when i try to flash with stock rom and pit ,
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Erase...
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
re-partition , auto reboot , nand erase all, f-reset time are checked. others unchecked.
also ive tried with nand erase all unchecked. i encounter this error,
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Let me upload the pit file.
Heres the file
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i get the same error when i use this pit file.
asdmo said:
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i get the same error when i use this pit file.
Click to expand...
Click to collapse
The only thing thats coming in my mind is to use the recovery option of kies3
Edit: before this step try using odin 1.8
vishal1286 said:
The only thing thats coming in my mind is to use the recovery option of kies3
Edit: before this step try using odin 1.8
Click to expand...
Click to collapse
no luck still not working. same errors.
asdmo said:
no luck still not working. same errors.
Click to expand...
Click to collapse
Use kies recovery options.
vishal1286 said:
Use kies recovery options.
Click to expand...
Click to collapse
it stucks on connecting when i use kies. ive uninstalled and reinstalled drivers and kies many times, tried flashing with many other stock roms but still its not working. i dont think that there is a hardware failure, cos' pc can recognize that its a samsung device. but not on kies. also i can see product name in download mode. cant flash pit either. i dont know what to do else. if i go to a samsung service they will probably change emmc chip and it will fix this problem. but still, i think that its just a software problem.
Bro use the recovery option of Kies. Search for recovery using kies in xda or google.
Sent from my GT-N7100 using Tapatalk
vishal1286 said:
Bro use the recovery option of Kies. Search for recovery using kies in xda or google.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
i get this error when i use kies recovery options. Firmware upgrade encountered an issued. as i told before, its not working. any other suggestion?
asdmo said:
it stucks on connecting when i use kies. ive uninstalled and reinstalled drivers and kies many times, tried flashing with many other stock roms but still its not working. i dont think that there is a hardware failure, cos' pc can recognize that its a samsung device. but not on kies. also i can see product name in download mode. cant flash pit either. i dont know what to do else. if i go to a samsung service they will probably change emmc chip and it will fix this problem. but still, i think that its just a software problem.
Click to expand...
Click to collapse
Download stock rom. .then using odin 3.09. .flash it. .choose AP. .
asdmo said:
i get this error when i use kies recovery options. Firmware upgrade encountered an issued. as i told before, its not working. any other suggestion?
Click to expand...
Click to collapse
Sorry bro that was the most I could have done.
Do this and try ok. Dnt knw f it will work r nt. Install philz recovery. Boot to recovery and do a "clean to install new rom wipe". After that check in kies with the stock firmware. Also before this remove kies and everythi g releated to samsung n reinstall kies3.
If it fails. Go to the service center.
Sent from my GT-N7100 using Tapatalk
My note 2 die too, same problem, did you find a solution?
same thing happen on my GT-N7105.
Stuck on Samsung boot screen (not the Samsung animated boot logo).
Try to plug-in the wall charger while the phone is off, an empty battery icon stuck (no animation) even remove the charging.
I'm haven't try to recover it. I'm still looking for a resolved solution.
Running on rooted with DN4 V2 ROM LTE, TWRP LTE and Agni.
Can boot to recovery & download mode.
TWRP: shows 0mb internal and external. can't mount anything. can't wipe anything.
cool zero said:
same thing happen on my GT-N7105.
Stuck on Samsung boot screen (not the Samsung animated boot logo).
Try to plug-in the wall charger while the phone is off, an empty battery icon stuck (no animation) even remove the charging.
I'm haven't try to recover it. I'm still looking for a resolved solution.
Running on rooted with DN4 V2 ROM LTE, TWRP LTE and Agni.
Can boot to recovery & download mode.
TWRP: shows 0mb internal and external. can't mount anything. can't wipe anything.
Click to expand...
Click to collapse
you can't mount, cuz the memory chip is corrupted
Last night I juz simply plugged it in for charging (the phone ws working fine) after half hour when I came back to unplug the charger I saw that the phone ws stuck on Samung N7100 logo and not booting up. I removed the battery and tried several times but nothing happened . Plz help . Plz tell me is their any solution for fixing this issue. I'll be glad coz XDA is the best place for fixing things. I knw XDA cn fix any issue !!. Plzzz
My stock ROM - N7100XXUFNL1_N7100ODDFNI1_INU
it ws Rooted with chainfire.
ISSUE -
E:failed to mount /esf (No such file or directory)
E:failed to mount /system (No such file or directory)
# MANUAL MODE #
-- Applying Multi-CSC...
E:failed to mount /system (No such file or directory)
can't mount '/system' (No such file or directory)
E:failed to mount /cache (No such file or directory)
can't mount '/cache' (No such file or directory)
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/last_recovery
E:failed to mount /data (No such file or directory)
E:Can't mount /data/log/recovery_log.txt
and so on errors..... (while on recovery mode)
Gone to the service center.. they said we hv to change the motherboard costing "" Rs 10500 "" What the Hell
Looks like all r having the same problem
Try To Flash The 4 File Stock Rom These LINK's For N7100 Only
This 4.4.2 Link
https://docs.google.com/uc?id=0B7SFLO9yoEcadktOSS1uQ1NDVWs&export=download
4.3 Link
http://d-h.st/e4N
4.1.2 Link
http://d-h.st/wWp
Give It A Try And Give Me Feedback THNX
You Have To Use .PIT File With These Firmware's Don't Forget To Use Ur Right .PIT File 16Gb
I don´t want to create false expectations, but mine restarted last week and got stuck on the Samsung animated logo, that was not animated in this case. My N7100 was starting to show problems on the SDCard reader, like sdcard remove and so on.
I believe the problem with the reader got worst and made the phone crazy.
After removing de card I tried old bootloaders like CWM and ot was getting worst each time I tried
First cache could be formated but data wasn´t, the neither /cache, then panic
So tried all bootloaders and format /system. Using Odin and the latest TWRP made the deal, suddenly everything normal but the sd card reader dead.
Already replaced the reader and teh Note 2 is working fine again with DN4.
MCP
SOLVED SOLVED SOLVED
JUST FLASHED THIS BPH4 https://drive.google.com/file/d/0B_gPYnMt2KosdGxGQXY1bzFjSE0/view
---------------------------------------------------------------------
Guys, anyone knows how to come out from this? Please...
EDIT:
Here is what odin says.
<ID:0/009> Odin engine v(ID:3.1100)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Removed!!
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> RQT_CLOSE !!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
EDIT 2:
If i flash BL from N920AUCU1AOGG stock rom i receive
<ID:0/009> Odin engine v(ID:3.1100)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Can't open the specified file. (Line: 2012)
<OSM> All threads completed. (succeed 0 / failed 1)
EDIT 3:
Reflashed the same bl with the pit file from csc, and this..:
<ID:0/009> Odin engine v(ID:3.1100)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> param.bin
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Don't flash the bootloader.
Please help me, i bricked my phone
It doesn't go beyond, samsung logo,
I tried to flash OJ1 firmware again using Odin, then i tried to updraded but failed twice. Now i am unable to boot at all.
I am able go to download mode but can't go to recovery. even after reflashing stock rom i stuck in samsung logo and cn't go beyond and can't go to recovery. but able to go to download mode. Please help.
Please help me how can i repartition my At&T glaxy note 5 and get the PIT file and other stuff for AT&T version of note 5. I shall be very very thankful.
Please help .....what to do now.
dradil said:
Please help me, i bricked my phone
It doesn't go beyond, samsung logo,
I tried to flash OJ1 firmware again using Odin, then i tried to updraded but failed twice. Now i am unable to boot at all.
I am able go to download mode but can't go to recovery. even after reflashing stock rom i stuck in samsung logo and cn't go beyond and can't go to recovery. but able to go to download mode. Please help.
Please help me how can i repartition my At&T glaxy note 5 and get the PIT file and other stuff for AT&T version of note 5. I shall be very very thankful.
Please help .....what to do now.
Click to expand...
Click to collapse
Download the file i linked give a try
Kundinga said:
Download the file i linked give a try
Click to expand...
Click to collapse
Thank you so much. I have downloaded the file. and tried to update it and i was able to flash it and phone booted well, but it restarts again and again. it happens with all the file. Thank you so much for this atleast phone booted. I loaded all the 4 files except the PIT file.
Should i also try to load the PIT file? How to load a PIT file what should i do, should i check the partition option in ODIN with PIT file. What should i do, is it any solution? of this restart again and again, i also tried to wipe cache in recovery, now my phone is able to run into the recovery.
Thanks a million time.
dradil said:
Thank you so much. I have downloaded the file. and tried to update it and i was able to flash it and phone booted well, but it restarts again and again. it happens with all the file. Thank you so much for this atleast phone booted. I loaded all the 4 files except the PIT file.
Should i also try to load the PIT file? How to load a PIT file what should i do, should i check the partition option in ODIN with PIT file. What should i do, is it any solution? of this restart again and again, i also tried to wipe cache in recovery, now my phone is able to run into the recovery.
Thanks a million time.
Click to expand...
Click to collapse
Put every file in his right section and load the pit, in Odin there is a menu hidden by a button on the left, one of the three let you load the pit (now I don't remember very well the interface hahah give a try)
Kundinga said:
Put every file in his right section and load the pit, in Odin there is a menu hidden by a button on the left, one of the three let you load the pit (now I don't remember very well the interface hahah give a try)
Click to expand...
Click to collapse
Thank you once agian for the reply.
Should i check the "re-partition option" after loading the PIT and then Start?