Hello,
I have a galaxy note 2.
I am currently having big issues :
The phone get stuck on samsung galaxy note 2 screen
When I press Start / volume Up and Home, i get to this recovery mode where it says that /efs canno't be mount, same with /cache and /system (if i remember)
E: failed to mount /efs (No such file or directory)
E: failed to mount /system (No such file or directory)
E: failed to mount /cache (No such file or directory)
#MANUAL MODE #
--Applying Multi-CSC...
Applied the CSC-code: unknown
Successfully applied multi-CSC
I tried wipe / reset to factory option but it not working
For the historic, what I did on this phone :
1. I rooted it with odin CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5
2. Everything was fine during 1 year, then i had issue (phone crashing, settings reseting to default), so i decided to update the rom with the official one N7100XXUFND3_N7100OXAFND3_N7100XXUFND3_HOME.tar.md5
3. Since yesterday night the phone is stuck on home
4. I try to reflash with odin with the offical rom and i get this error
ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
I still have a backup of the EFS, i read that i should restore the EFS but I can't do it with ADB because when i type root shell in adb it says : "error : device not found" (I am in download mode though)
Thank you for your help
will kies help?
䙉Êû said:
will kies help?
Click to expand...
Click to collapse
Hello, thank for your answer
Kies, doesn't detect my phone... I success to download the firmware with Kies but then it says that my phone is not accessible.
Odin detects my phone though.
I have installed samsung drivers,
Side54723 said:
Hello, thank for your answer
Kies, doesn't detect my phone... I success to download the firmware with Kies but then it says that my phone is not accessible.
Odin detects my phone though.
I have installed samsung drivers,
Click to expand...
Click to collapse
I have windows 8 by the way !
Side54723 said:
I have windows 8 by the way !
Click to expand...
Click to collapse
maybe you can try to flash a third-party recovery like CWM with odin and watch if it flashed successfully and if you can enter recovery. the recovery file is a normal tar.md5 which can be flashed like stock firmware.Drivers works well under windows 8 8.1even the newest windows10 tp
䙉Êû said:
maybe you can try to flash a third-party recovery like CWM with odin and watch if it flashed successfully and if you can enter recovery. the recovery file is a normal tar.md5 which can be flashed like stock firmware.Drivers works well under windows 8 8.1even the newest windows10 tp
Click to expand...
Click to collapse
Where can i download it ? I have a french galaxy note 2 7100
Thank you,
Side54723 said:
Where can i download it ? I have a french galaxy note 2 7100
Thank you,
Click to expand...
Click to collapse
I tried to flash with CWM and odin fails on WIN7
The icon is blue (0:[COM8)
I selected "Note2-CWM-6.0.4.3-GT-N7100.tar" in PDA
<ID:0/008> Added!!
<ID:0/008> Removed!!
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks for help
Side54723 said:
Where can i download it ? I have a french galaxy note 2 7100
Thank you,
Click to expand...
Click to collapse
You can search for it in the N7100 Android Development Forum ，there are many excellent recovery like CWM ，Philz and TWRP.Most of them work well on international N7100
---------- Post added at 11:14 AM ---------- Previous post was at 11:04 AM ----------
Side54723 said:
I tried to flash with CWM and odin fails on WIN7
The icon is blue (0:[COM8)
I selected "Note2-CWM-6.0.4.3-GT-N7100.tar" in PDA
<ID:0/008> Added!!
<ID:0/008> Removed!!
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks for help
Click to expand...
Click to collapse
Make sure you have a good cable and use back USB(2.0) port if you are using a desktop.Maybe youcan try another recovery file and flash as many times as you can(someone said it would work)
䙉Êû said:
You can search for it in the N7100 Android Development Forum ，there are many excellent recovery like CWM ，Philz and TWRP.Most of them work well on international N7100
---------- Post added at 11:14 AM ---------- Previous post was at 11:04 AM ----------
Make sure you have a good cable and use back USB(2.0) port if you are using a desktop.Maybe youcan try another recovery file and flash as many times as you can(someone said it would work)
Click to expand...
Click to collapse
Hello,
I tried CWM and philz with ODIN.
Maybe i should try from SD CARD ?
I changed 3 usb cable and I am using USB 2.0 (LAPTOP)
Side54723 said:
Hello,
I tried CWM and philz with ODIN.
Maybe i should try from SD CARD ?
I changed 3 usb cable and I am using USB 2.0 (LAPTOP)
Click to expand...
Click to collapse
That means you cant flash recovery either?
䙉Êû said:
That means you cant flash recovery either?
Click to expand...
Click to collapse
I tried flashing with philz recovery, cwm, by odin or by sd card.
The sd card is not recognized (even after repartition it) => /Sdcard canno't be mount and i can't see any files
I also tried to update the rom + pit + repartition mais still failing in odin
hi,
i also have similar problem with my N7100.
phone stuck in Samsung GT-N7100 logo.
unable to go to Recovery Mode, but download mode OK.
tried to flash Stock Firmware with Odin, but failed
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFNI4_N7100OLBFNI1_N7100DXUFNI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
tried to flash PhilZ Touch 6 Recovery, but failed. :crying:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
from the log, it seem like Odin unable to write. anyone know whats the problem?
tried swap battery with friends, friends phone work well with my battery, but mine still the same even with my friends battery.
Side54723 said:
Hello,
I have a galaxy note 2.
I am currently having big issues :
The phone get stuck on samsung galaxy note 2 screen
When I press Start / volume Up and Home, i get to this recovery mode where it says that /efs canno't be mount, same with /cache and /system (if i remember)
E: failed to mount /efs (No such file or directory)
E: failed to mount /system (No such file or directory)
E: failed to mount /cache (No such file or directory)
#MANUAL MODE #
--Applying Multi-CSC...
Applied the CSC-code: unknown
Successfully applied multi-CSC
I tried wipe / reset to factory option but it not working
For the historic, what I did on this phone :
1. I rooted it with odin CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5
2. Everything was fine during 1 year, then i had issue (phone crashing, settings reseting to default), so i decided to update the rom with the official one N7100XXUFND3_N7100OXAFND3_N7100XXUFND3_HOME.tar.md5
3. Since yesterday night the phone is stuck on home
4. I try to reflash with odin with the offical rom and i get this error
ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
I still have a backup of the EFS, i read that i should restore the EFS but I can't do it with ADB because when i type root shell in adb it says : "error : device not found" (I am in download mode though)
Thank you for your help
Click to expand...
Click to collapse
Do these at your own risk.
search for PIT file made by dr ketan and flash it together with the stock n7100 firmware in odin. that will solve tour problem.
somebody posted pit file here.. be sure that your n7100 is 16gb
http://forum.xda-developers.com/show....php?t=1927983
extract it and use that together with the stock firmware in odin. select pit for pit files and pda for stock firmware
after finish flashing it will be stuck again in samsung logo. boot again to recovery mode and wipe data/reset to factory mode and then reboot
Related
I tried to use Odin to install the N7105 South Africa rom.
It was stuck for 10 minutes so I unplugged and reboot. Now the phone is stuck in a screen that reads
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I plugged in the phone to Kies and Kies won't pick up the device on USB.
I tried to re-rom the phone again and it Odin keeps failing. Here's the log from Odin:
<OSM> Please wait..
<OSM> N7105XXDLK7_N7105OJVDLK5_N7105XXDLK7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Please advise.
Are you still able to access your recovery? And what about your bootloader? You could always tweak with your device from the recovery or from the bootloader on the fastboot usb. Make sire you've got your device drivers if your gonna fastboot usb it!
MistedEvo said:
Are you still able to access your recovery? And what about your bootloader? You could always tweak with your device from the recovery or from the bootloader on the fastboot usb. Make sire you've got your device drivers if your gonna fastboot usb it!
Click to expand...
Click to collapse
Just the bootload screen to download roms. HOw do I tweak it from the recovery menu?
get a stock odin image and flash it again
it will probably get stuck... in which case, boot to recovery (it will be the stock one) by holding volume up + home + power until you see the recovery
wipe data
reboot.
good to go.
Thx. got it.
hi, i'm trying flash a ROM to note 10.1 p605, it has Singapore ROM originally and im trying to flash German ROM
i get this error in Odin every time i try to flash:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P605XXUAMJ2_P605OJVAMI3_P605XXUAMJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Mashari_F said:
hi, i'm trying flash a ROM to note 10.1 p605, it has Singapore ROM originally and im trying to flash German ROM
i get this error in Odin every time i try to flash:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P605XXUAMJ2_P605OJVAMI3_P605XXUAMJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
1) Have you tried to use an other usb port?
2) do you use the original usb cable?
3) do you have all the samsung drivers installed?
4) make eure that samsung kies is not running in the background
Hope it helps you
Gesendet von meinem SM-P600 mit Tapatalk
Got the same problem, so recovered it from kies
Skickat från min SM-P605 via Tapatalk
Hi... Anybody have a solution for this problem? Have the tablet returned from a service and tried to flash the recovery but it just doesn't work.
THanks a lot for any help.
ronaldphl said:
Hi... Anybody have a solution for this problem? Have the tablet returned from a service and tried to flash the recovery but it just doesn't work.
THanks a lot for any help.
Click to expand...
Click to collapse
Is it giving you a FAIL after flashing , or doesn`t show up after a successful flash.
If it doesn`t show up after flashing , re-flash but untick "Auto-Reboot" within odin before flashing & restart manually after flashing.
I have a "Fail after flashing" - complete (Write) - operation failed in Odin
Which odin
Hi,
When flashing with oder it depends on the package which oder will work.
At my p 605 the 1.86 version was working without probs.
The best is to use the Oden which is coming together the Roms Zipfile.
I hope this info helps please let me know.
Good luck
FSkyman said:
Hi,
When flashing with oder it depends on the package which oder will work.
At my p 605 the 1.86 version was working without probs.
The best is to use the Oden which is coming together the Roms Zipfile.
I hope this info helps please let me know.
Good luck
Click to expand...
Click to collapse
I tried all the possible combination... different Odin... different cables and ports... it just didn't work.
Since I read from a old post that flashing a original rom thru Odin helps... and i tried... Odin works and the rom can be flashed without prompting the signature verification failed error.
I suspect if Samsung has done something to make the recovery image fails...
I tried flashing the recovery using the stock recovery too and it failed as well
Recovery Flashing
ronaldphl said:
I tried all the possible combination... different Odin... different cables and ports... it just didn't work.
Since I read from a old post that flashing a original rom thru Odin helps... and i tried... Odin works and the rom can be flashed without prompting the signature verification failed error.
I suspect if Samsung has done something to make the recovery image fails...
I tried flashing the recovery using the stock recovery too and it failed as well
Click to expand...
Click to collapse
Now I am confused are you talking about recovery or rom ?
The only recovery I could get to work was the TWRP - this Zip file comes with a Odin that works.
Cwm philz are not working.
But keep in mind as soon you installed twrp your knox counter is tripped.
For rom flashing you have to wipe your tablet and then follow these instructions xxxx://www.droidgator.com/update-galaxy-note-101-sm-p605-android-43-xxubmj9-firmware/.
Before starting backup your tab then everything should be fine.
Thanks for your effort in helping me out...
Before I sent my tablet for servicing... I restored the tablet with Kies to the original factory setting and rom as I HAD rooted my P605 and flashed a custom rom before. [Although the Know count is 0*1 anyway.... but the service centre was kind enough to fix my tablet as it's a hardware failure instead of anything to do with the ROM ]
When I got my tablet back and tried to flash the TWRP into it, this problem surfaced. And I read from another post that some say flashing a Samsung original rom could help I tried but to no avail. Still I am waiting and looking for a solution.
I tried Odin 3.04 3.07 and 1.85 with the two versions of TWRP but still none of them work.
Cant flash Stock firmmware
Hi Guys
Tried all methods in the fourms but i am still not able to flash stock firmware from odin.
this is the error i get.
I am trying to update using Odin 3.09 as well as 3.07. but it is failing while writing system.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img.ext4
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone please help me? Is this because this shows Write Protection : Enable?
nihalvm said:
Hi Guys
Tried all methods in the fourms but i am still not able to flash stock firmware from odin.
this is the error i get.
I am trying to update using Odin 3.09 as well as 3.07. but it is failing while writing system.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img.ext4
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone please help me? Is this because this shows Write Protection : Enable?
Click to expand...
Click to collapse
---
Might you recall what the firmware version was before you started to flash this one?
I am also trying to recover from NC3 back to MJ4XAC and it is not allowing me to finish, Kies also does not recover the tablet. It looks like one of the filesystems is in a different state. With TWRP there are options to perform CHMOD on the file systems but I figure I have been mocking around long enough and for some reason beyond my experience the system is not responding.
Can you still get into ADB mode? That might be an option to see if you can gain access?
nihalvm said:
Hi Guys
Tried all methods in the fourms but i am still not able to flash stock firmware from odin.
this is the error i get.
I am trying to update using Odin 3.09 as well as 3.07. but it is failing while writing system.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img.ext4
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone please help me? Is this because this shows Write Protection : Enable?
Click to expand...
Click to collapse
Is the sm-p605v (verizon) synonymous with sm-p605 for technical purposes? I am having identical problems with lt03ltevzw. Odin 3
aelaan said:
---
Might you recall what the firmware version was before you started to flash this one?
I am also trying to recover from NC3 back to MJ4XAC and it is not allowing me to finish, Kies also does not recover the tablet. It looks like one of the filesystems is in a different state. With TWRP there are options to perform CHMOD on the file systems but I figure I have been mocking around long enough and for some reason beyond my experience the system is not responding.
Can you still get into ADB mode? That might be an option to see if you can gain access?
Click to expand...
Click to collapse
Although it failed, I was able to recover using kies and use tablet as normal without data loss. It might be because at that point I had not rooted my tab and system state was still original in odin.
By the way I was on MJ4 xsa(AUSTRALIA) trying to install NC2 TGY(HONG KONG).
Now I have rooted it and have I installed NC2. I am still not sure what the issue was. But the only thing I did different was, first was using a virtual machine, but now did in an actual windows machine.
Can you please try this? If you can, install back NC2 using odin. Boot it once, then try recovering using kies. Kies recover mode gets your latest firmware based on your serial number. Not what firmware you are running.
Please post back the result. Interested to know the outcome.
Sent from my SM-P605 using XDA Premium 4 mobile app
---------- Post added at 08:38 AM ---------- Previous post was at 08:33 AM ----------
Khazaad said:
Is the sm-p605v (verizon) synonymous with sm-p605 for technical purposes? I am having identical problems with lt03ltevzw. Odin 3
Click to expand...
Click to collapse
I don't think it is. Although the specs are the same, read somewhere that the internal partition structure for carrier branded firmware are different to generic. Don't remember where I read that. But can't confirm that either.
Sent from my SM-P605 using XDA Premium 4 mobile app
I am lost reading a lot of articles about how to solve my issue, but before solving it I need to know what is it ?
I have N7100 which:
In normal mode: hangs on Samsung logo while starting up and it never go further than that,
In Recovery mode: restarts when I see the TWRP logo.
In download mode: works fine
I read lots of article and I tried to flash the stock ROM from SamFirmware with now luck "although it is successful". Check my log:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFND4_N7100OJVFND3_N7100XXUFND3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> tz.img
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> modem.bin
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
Another useful information to mention is that in the download mode here are what is written:
Code:
ODIN MODE
PRODUCT NAME: GT-N7100
CUSTOM BINARY DOWNLOAD: Yes (4 Counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
I tried flashing different firmwares and different recoveries with no luck, by mistake I flashed TWRP N7100 AT&T version "openrecovery-twrp-2.7.2.2-t0lteatt.img", after that I am now able to get in recovery mode but
it asks for a password
it displayed a title Team Win Recovery Project v2.6.3.1 "although it is not the AT&T version"
I cancelled the password and opened the log and I was chocked with what I saw:
Code:
E: unable to find partition size for '/boot'
E: unable to find partition size for '/recovery'
E: unable to find partition size for '/modem'
E: unable to find partition size for '/data'
Updating partition details...
E: unable to mount '/efs'
E: unable to mount '/cache'
E: unable to mount '/system'
E: unable to mount '/cache'
E: unable to mount '/cache'
The question is what is my phone problem, how to trouble shot it and solve it ??? :crying::crying::crying::crying:
Gabrianoo said:
I am lost reading a lot of articles about how to solve my issue, but before solving it I need to know what is it ?
I have N7100 which:
In normal mode: hangs on Samsung logo while starting up and it never go further than that,
In Recovery mode: restarts when I see the TWRP logo.
In download mode: works fine
I read lots of article and I tried to flash the stock ROM from SamFirmware with now luck "although it is successful". Check my log:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFND4_N7100OJVFND3_N7100XXUFND3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> tz.img
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> modem.bin
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
Another useful information to mention is that in the download mode here are what is written:
Code:
ODIN MODE
PRODUCT NAME: GT-N7100
CUSTOM BINARY DOWNLOAD: Yes (4 Counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
I tried flashing different firmwares and different recoveries with no luck, by mistake I flashed TWRP N7100 AT&T version "openrecovery-twrp-2.7.2.2-t0lteatt.img", after that I am now able to get in recovery mode but
it asks for a password
it displayed a title Team Win Recovery Project v2.6.3.1 "although it is not the AT&T version"
I cancelled the password and opened the log and I was chocked with what I saw:
Code:
E: unable to find partition size for '/boot'
E: unable to find partition size for '/recovery'
E: unable to find partition size for '/modem'
E: unable to find partition size for '/data'
Updating partition details...
E: unable to mount '/efs'
E: unable to mount '/cache'
E: unable to mount '/system'
E: unable to mount '/cache'
E: unable to mount '/cache'
The question is what is my phone problem, how to trouble shot it and solve it ??? :crying::crying::crying::crying:
Click to expand...
Click to collapse
You could try Samsungs kies emergency recovery as describes here:
http://forum.xda-developers.com/showthread.php?t=2261153
http://www.samsung.com/us/support/faq/FAQ00059169/81100
Mabye it will fix it, but it is a long shot.
Edit:
Small addition emergency recovery requires kies 3, if emergency recovery doesn't work you can try the firmware upgrade and initialisation option from kies (which also flashes everything trough download mode)
m.n.mulder1992 said:
You could try Samsungs kies emergency recovery as describes here:
http://forum.xda-developers.com/showthread.php?t=2261153
http://www.samsung.com/us/support/faq/FAQ00059169/81100
Mabye it will fix it, but it is a long shot.
Edit:
Small addition emergency recovery requires kies 3, if emergency recovery doesn't work you can try the firmware upgrade and initialisation option from kies (which also flashes everything trough download mode)
Click to expand...
Click to collapse
Couldn't get it done stuck at "the device's version cannot be updated" because I am on a custom recovery.
Other idea
Gabrianoo said:
Couldn't get it done stuck at "the device's version cannot be updated" because I am on a custom recovery.
Click to expand...
Click to collapse
Ok other idea did you try repartitioning with Odin?
5th post has the PIT file needed for repartitioning http://forum.xda-developers.com/showthread.php?t=1927983
The main thing emergency recovery does is: repartitioning and flashing all partitions anyway.
PS.
Also weird i can use emergency recovery with CWM installed
mnm1992 said:
Ok other idea did you try repartitioning with Odin?
5th post has the PIT file needed for repartitioning http://forum.xda-developers.com/showthread.php?t=1927983
The main thing emergency recovery does is: repartitioning and flashing all partitions anyway.
PS.
Also weird i can use emergency recovery with CWM installed
Click to expand...
Click to collapse
Regarding the mentioned thread I tried it before with no luck, I repeated it and here are the log results:
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Nothing changed after the re-partitioning :crying:
About your note I don't know why ? but I am expecting the wired behavior
I started to lose hope and I guess I will go to the mother board replacement solution although I feel like it can be solved by a software solution.
Gabrianoo said:
Regarding the mentioned thread I tried it before with no luck, I repeated it and here are the log results:
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Nothing changed after the re-partitioning :crying:
About your note I don't know why ? but I am expecting the wired behavior
I started to lose hope and I guess I will go to the mother board replacement solution although I feel like it can be solved by a software solution.
Click to expand...
Click to collapse
Just a check:
You did:
1: start Odin
2 select repartition
3: select pit file
4: click pda select some archive from sammmobile right?
Otherwise it won't work cause:
Repartition creates the empty partitions (System, data, recovery, etc ) specified in the PIT file
The archive under the PDA option fills those partitions with the needed files
If you did just the repartition it won,t boot cause the partitions are empty.
Hello guys,
I have a semi-bricked GT-N7100 ( international ) note 2. its not booting and it stucks on samsung logo. i can access to download and recovery mode. the device wasnt rooted and it always used in stock rom. i didn't even access to recovery and download mode before this brick. i dont know why this happened cos i wasnt the one using it.
In recovery mode , i encounter with these errors;
failed to mount /efs ( no such file or directory)
failed to mount /system ( no such file or directory)
failed to mount /cache ( no such file and directory)
when i do wipe and cache it says its completed but it gives more error while doing it.
in download mode i can see the product name. so i think that mainboard is ok.
PRODUCT NAME : GT-N7100
CURRENT BINARY: Samsung Offical
SYSTEM STATUS: Official
KNOX WARRANT VOID: 0
AP SWREV: A2
So, i have downloaded odin 1.85 and some other versions and tried to flash with stock rom. but it always fails.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
when i try to flash pit,
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i get these errors.
ive also tried to root with cwm and it gives same nand error. i tried to use kies to fix it by writing serial number but it doesnt recognize the device. ive read a lot of topics in various forums but couldn't find a solution. if you can help me it will be much appreciated, thank you in advance.
Bro what i suggest is flash the stock rom with the pit file n check the options repartition and nand erase all in odin. If it flashes successfully do a facrory reset. Make sure you have the correct pit file. If you have n7100 16 gb i can give 1 for you.
im not sure if device is 16gb but ive used the pit file that ive found in this forum for 16gb. i dont have any information about its gigabyte but its higher chance that its 16gb.
it gave this error when i try to flash with stock rom and pit ,
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Erase...
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
re-partition , auto reboot , nand erase all, f-reset time are checked. others unchecked.
also ive tried with nand erase all unchecked. i encounter this error,
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Let me upload the pit file.
Heres the file
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i get the same error when i use this pit file.
asdmo said:
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i get the same error when i use this pit file.
Click to expand...
Click to collapse
The only thing thats coming in my mind is to use the recovery option of kies3
Edit: before this step try using odin 1.8
vishal1286 said:
The only thing thats coming in my mind is to use the recovery option of kies3
Edit: before this step try using odin 1.8
Click to expand...
Click to collapse
no luck still not working. same errors.
asdmo said:
no luck still not working. same errors.
Click to expand...
Click to collapse
Use kies recovery options.
vishal1286 said:
Use kies recovery options.
Click to expand...
Click to collapse
it stucks on connecting when i use kies. ive uninstalled and reinstalled drivers and kies many times, tried flashing with many other stock roms but still its not working. i dont think that there is a hardware failure, cos' pc can recognize that its a samsung device. but not on kies. also i can see product name in download mode. cant flash pit either. i dont know what to do else. if i go to a samsung service they will probably change emmc chip and it will fix this problem. but still, i think that its just a software problem.
Bro use the recovery option of Kies. Search for recovery using kies in xda or google.
Sent from my GT-N7100 using Tapatalk
vishal1286 said:
Bro use the recovery option of Kies. Search for recovery using kies in xda or google.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
i get this error when i use kies recovery options. Firmware upgrade encountered an issued. as i told before, its not working. any other suggestion?
asdmo said:
it stucks on connecting when i use kies. ive uninstalled and reinstalled drivers and kies many times, tried flashing with many other stock roms but still its not working. i dont think that there is a hardware failure, cos' pc can recognize that its a samsung device. but not on kies. also i can see product name in download mode. cant flash pit either. i dont know what to do else. if i go to a samsung service they will probably change emmc chip and it will fix this problem. but still, i think that its just a software problem.
Click to expand...
Click to collapse
Download stock rom. .then using odin 3.09. .flash it. .choose AP. .
asdmo said:
i get this error when i use kies recovery options. Firmware upgrade encountered an issued. as i told before, its not working. any other suggestion?
Click to expand...
Click to collapse
Sorry bro that was the most I could have done.
Do this and try ok. Dnt knw f it will work r nt. Install philz recovery. Boot to recovery and do a "clean to install new rom wipe". After that check in kies with the stock firmware. Also before this remove kies and everythi g releated to samsung n reinstall kies3.
If it fails. Go to the service center.
Sent from my GT-N7100 using Tapatalk
My note 2 die too, same problem, did you find a solution?
same thing happen on my GT-N7105.
Stuck on Samsung boot screen (not the Samsung animated boot logo).
Try to plug-in the wall charger while the phone is off, an empty battery icon stuck (no animation) even remove the charging.
I'm haven't try to recover it. I'm still looking for a resolved solution.
Running on rooted with DN4 V2 ROM LTE, TWRP LTE and Agni.
Can boot to recovery & download mode.
TWRP: shows 0mb internal and external. can't mount anything. can't wipe anything.
cool zero said:
same thing happen on my GT-N7105.
Stuck on Samsung boot screen (not the Samsung animated boot logo).
Try to plug-in the wall charger while the phone is off, an empty battery icon stuck (no animation) even remove the charging.
I'm haven't try to recover it. I'm still looking for a resolved solution.
Running on rooted with DN4 V2 ROM LTE, TWRP LTE and Agni.
Can boot to recovery & download mode.
TWRP: shows 0mb internal and external. can't mount anything. can't wipe anything.
Click to expand...
Click to collapse
you can't mount, cuz the memory chip is corrupted
Last night I juz simply plugged it in for charging (the phone ws working fine) after half hour when I came back to unplug the charger I saw that the phone ws stuck on Samung N7100 logo and not booting up. I removed the battery and tried several times but nothing happened . Plz help . Plz tell me is their any solution for fixing this issue. I'll be glad coz XDA is the best place for fixing things. I knw XDA cn fix any issue !!. Plzzz
My stock ROM - N7100XXUFNL1_N7100ODDFNI1_INU
it ws Rooted with chainfire.
ISSUE -
E:failed to mount /esf (No such file or directory)
E:failed to mount /system (No such file or directory)
# MANUAL MODE #
-- Applying Multi-CSC...
E:failed to mount /system (No such file or directory)
can't mount '/system' (No such file or directory)
E:failed to mount /cache (No such file or directory)
can't mount '/cache' (No such file or directory)
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/last_recovery
E:failed to mount /data (No such file or directory)
E:Can't mount /data/log/recovery_log.txt
and so on errors..... (while on recovery mode)
Gone to the service center.. they said we hv to change the motherboard costing "" Rs 10500 "" What the Hell
Looks like all r having the same problem
Try To Flash The 4 File Stock Rom These LINK's For N7100 Only
This 4.4.2 Link
https://docs.google.com/uc?id=0B7SFLO9yoEcadktOSS1uQ1NDVWs&export=download
4.3 Link
http://d-h.st/e4N
4.1.2 Link
http://d-h.st/wWp
Give It A Try And Give Me Feedback THNX
You Have To Use .PIT File With These Firmware's Don't Forget To Use Ur Right .PIT File 16Gb
I don´t want to create false expectations, but mine restarted last week and got stuck on the Samsung animated logo, that was not animated in this case. My N7100 was starting to show problems on the SDCard reader, like sdcard remove and so on.
I believe the problem with the reader got worst and made the phone crazy.
After removing de card I tried old bootloaders like CWM and ot was getting worst each time I tried
First cache could be formated but data wasn´t, the neither /cache, then panic
So tried all bootloaders and format /system. Using Odin and the latest TWRP made the deal, suddenly everything normal but the sd card reader dead.
Already replaced the reader and teh Note 2 is working fine again with DN4.
MCP
Hi,
I woke up this morning and found my phone stuck on the startup logo.
I tried removing the battery and wipe the cache but it won't go past the start up logo.
I don't care about the phone, I wanted to change it anyway but I would like to retrieve some data before. So I haven't try the factory reset yet. Is there a way to save some data ? (my contacts and some data from note everything and task list mainly).
I afraid to try something and wipe all my data.....
Note : when I go to recovery, It says "failed to mount /efs (no such file or directory)... failed to mount /system ......"
Flash TWRP using Odin. Then boot into TWRP, mount the data partition, connect the phone to a computer, and copy off the data files. Hopefully, this method works for the phone.
You mean I have to install TWRP (? Team win recovery project) on my phone using Odin ? Is that correct and then start the phone with TWRP ?
Does my phone need to be rooted for that ? (it's not).
I haven't use odin or TWRP yet but I will try and tell you if that works.
Any advice for how to use Odin and TWRP for a beginner ?
Thanks
So after making a few more research to understand how to use odin et twrp, I tried to flash twrp using odin but it failed. Here is my log :
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
so what do I do now ?
Use the tar version of TWRP, not the IMG version.
I used this file : twrp-3.0.2-0-t03g.img.tar so it should be right
So I finally tried to wipe the data from recovery mode and it didn't work.
Tried to reload the firmware using odin (N7100XXUFOC2_N7100OXAFOC2_N7100XXUFNG1_HOME.tar.md5) and got this :
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is there something else I can do or is this a hardware problem ?
The sboot.bin file is the bootloader for the phone and could be failing due to the following reasons:
the ROM is not for the phone;
need to use a different USB cable and/or different USB 2.0 ports;
the bootloader in the phone is newer than the bootloader in the ROM;
the ROM needs to be flashed with a pit file;
the memory chip is damaged.