Hope someone can help me
phone: note 2 GT-N7105
OS: windows 10 64bit/windows 7 64 bit
tried with several odins 3.04, 3.10.7, 3.07, 3.09, 3.11.1, 3.12.3, 3.10.6, 3.10.7
2 PIT files
-T0LTE_EUR_OPEN_8G.pit
-N7105_t0_Mx-MDM.pit
full 4 files: N7105ZHUEMK3
one tar file: N7105XXUFOB2_N7105OLBFOD1_N7105XXUFNI2_HOME.tar.md5
My phone can go into recovery and download mode.
Cannot clear cache or data in recovery mode as mount or read error occur
When flash in odin, re-parition operating error
Is there anyway to flash from sd card or anything like that?
Hope someone kindly shed the light.
Thank you!
Error without PIT file
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Error with PIT file
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried different usb cables and usb ports?
audit13 said:
Tried different usb cables and usb ports?
Click to expand...
Click to collapse
Yes different ports
Yes different usb cable but none are samsung's cable though. thanks.
Btw, firmware and pit file must be the same or doesn't need to be?
PIT file is only matter for the model?
Thanks.
The pit file must match the model number and amount of memory.
Do you get pit error when trying to flash without the pit file?
audit13 said:
The pit file must match the model number and amount of memory.
Do you get pit error when trying to flash without the pit file?
Click to expand...
Click to collapse
No, I didn't get PIT error without PIT file.
In my experience, pit files are only required if Odin is not able to pull the partition information from the phone during the flash process.
You might want to look into having the phone flashed via jtag.
Related
after flashing the repencis v2.6pro it got stuck in boot screen and it wont go to recovery and i am not able to flash it with odin v1.85 it comes like this
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i did it with the dokey's kies broken frimware specified in his thread
plz help
vllskumar said:
after flashing the repencis v2.6pro it got stuck in boot screen and it wont go to recovery and i am not able to flash it with odin v1.85 it comes like this
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i did it with the dokey's kies broken frimware specified in his thread
plz help
Click to expand...
Click to collapse
Try another version. Make sure your phone is in download mode using Vol down+Home key+Power key. Flash it when the COM box is lit up after selecting PDA, Phone and CSC. Try Odin v1.84 if v1.85 fails.
raolemo said:
Try another version. Make sure your phone is in download mode using Vol down+Home key+Power key. Flash it when the COM box is lit up after selecting PDA, Phone and CSC. Try Odin v1.84 if v1.85 fails.
Click to expand...
Click to collapse
Try pressing Ctrl+Alt+Delete and go to "Processes" and search for the following process :"KiesTrayAgent.exe","Kies.exe","adb.exe"
If you seen that all in the processes of your PC/Laptop , Make sure to end that all process before proceeding up with Mr.Odin
Because mine i've flashed my DXLA1 Firmware because i always encountering SD Card issues so i ended up downgrading my DXLA1 to my Factory Firmware DXKK4
In this way , Mr.Odin helped me
vllskumar said:
after flashing the repencis v2.6pro it got stuck in boot screen and it wont go to recovery and i am not able to flash it with odin v1.85 it comes like this
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i did it with the dokey's kies broken frimware specified in his thread
plz help
Click to expand...
Click to collapse
install some other version... kill kies / adb processes... make sure ur cable is fine
got it right
there was some problem with the kies splitted files so downloaded the firmware from from another source n now got it working thx guyz
I was trying to recover my Samsung Galaxy note 2 from soft brick status. so I tried to install new CWM recovery mode. it looks like something happened in the middle of the installation and now I started to get pit related errors in oden and the screen turned blank white when turning ON my phone.
I read in some places that I need to use new pit file to re-partition my phone. however I tried to download countless pit files from the net but none of them worked even the one I found here http://forum.xda-developers.com/showpost.php?p=31801134&postcount=4
I'm getting the same error as oden log below:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
can anyone help me please.
No reply
It looks like this is the least interesting question in the whole community, after it has been posted for more than 4 days and seen by more than 120 people no one has ever replied!!
Please guys, if you have any suggestion, Kindly dly share it.
I had to get my S3 Jtagged as a result of flashing the wrong bootloader. When I received the S3 after it had been Jtagged the imei and baseband had been erased, I tried to flash it back to stock via odin and got the following"<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> aboot.mbn
<ID:0/011> NAND Write Start!!
<ID:0/011> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)"
Can anyone help me?
purelight97 said:
I had to get my S3 Jtagged as a result of flashing the wrong bootloader. When I received the S3 after it had been Jtagged the imei and baseband had been erased, I tried to flash it back to stock via odin and got the following"<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> aboot.mbn
<ID:0/011> NAND Write Start!!
<ID:0/011> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)"
Can anyone help me?
Click to expand...
Click to collapse
What type of S3? i747?, If so download this https://mega.co.nz/#!ot93EJCb!k9p5tBXX9fVlBhpjCBHfArqsMI3xRcEC6QrjHH2jB0Y USE ODIN 3.09 ONLY. Match each section with each file, and then check repartition. The only things that should be checked, are AutoReboot Repartition and F.Reset Time.
Hope this helps.
DanteDFG said:
What type of S3? i747?, If so download this https://mega.co.nz/#!ot93EJCb!k9p5tBXX9fVlBhpjCBHfArqsMI3xRcEC6QrjHH2jB0Y USE ODIN 3.09 ONLY. Match each section with each file, and then check repartition. The only things that should be checked, are AutoReboot Repartition and F.Reset Time.
Hope this helps.
Click to expand...
Click to collapse
Thanks for the reply, but what do you mean by match each section with each file? Also I extracted the zip file and I got 4 .tar files, which should I flash?
purelight97 said:
Thanks for the reply, but what do you mean by match each section with each file? Also I extracted the zip file and I got 4 .tar files, which should I flash?
Click to expand...
Click to collapse
Use all 4 files. Use PIT . PIT Ap in Ap Bl in BL CSC in Csc and Cp in Cp and let it all flash at once, with only Repartion, AutoReboot and F.reset time checked
Edit:
PROBLEM SOLVED
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
softbricked phone, trying to restore to 4.4.4 from here. help
tried 3.07. 3.09, 3.10
and different usb
If Odin can't get the partition information from the phone, you'll need to find a pit file for your phone and flash it together with the stock firmware using Odin.
Here's a pit file for the SGH-M919.
smiley_face said:
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
softbricked phone, trying to restore to 4.4.4 from here. help
tried 3.07. 3.09, 3.10
and different usb
Click to expand...
Click to collapse
Do you still need a pit file? Here is the pit file from my SGH-M919 T-Mobile S4. You are welcome to use it.
http://www.mediafire.com/download/6bbr7f9049uh338/m919.pit
SOLVED SOLVED SOLVED
JUST FLASHED THIS BPH4 https://drive.google.com/file/d/0B_gPYnMt2KosdGxGQXY1bzFjSE0/view
---------------------------------------------------------------------
Guys, anyone knows how to come out from this? Please...
EDIT:
Here is what odin says.
<ID:0/009> Odin engine v(ID:3.1100)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Removed!!
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> RQT_CLOSE !!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
EDIT 2:
If i flash BL from N920AUCU1AOGG stock rom i receive
<ID:0/009> Odin engine v(ID:3.1100)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Can't open the specified file. (Line: 2012)
<OSM> All threads completed. (succeed 0 / failed 1)
EDIT 3:
Reflashed the same bl with the pit file from csc, and this..:
<ID:0/009> Odin engine v(ID:3.1100)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> param.bin
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Don't flash the bootloader.
Please help me, i bricked my phone
It doesn't go beyond, samsung logo,
I tried to flash OJ1 firmware again using Odin, then i tried to updraded but failed twice. Now i am unable to boot at all.
I am able go to download mode but can't go to recovery. even after reflashing stock rom i stuck in samsung logo and cn't go beyond and can't go to recovery. but able to go to download mode. Please help.
Please help me how can i repartition my At&T glaxy note 5 and get the PIT file and other stuff for AT&T version of note 5. I shall be very very thankful.
Please help .....what to do now.
dradil said:
Please help me, i bricked my phone
It doesn't go beyond, samsung logo,
I tried to flash OJ1 firmware again using Odin, then i tried to updraded but failed twice. Now i am unable to boot at all.
I am able go to download mode but can't go to recovery. even after reflashing stock rom i stuck in samsung logo and cn't go beyond and can't go to recovery. but able to go to download mode. Please help.
Please help me how can i repartition my At&T glaxy note 5 and get the PIT file and other stuff for AT&T version of note 5. I shall be very very thankful.
Please help .....what to do now.
Click to expand...
Click to collapse
Download the file i linked give a try
Kundinga said:
Download the file i linked give a try
Click to expand...
Click to collapse
Thank you so much. I have downloaded the file. and tried to update it and i was able to flash it and phone booted well, but it restarts again and again. it happens with all the file. Thank you so much for this atleast phone booted. I loaded all the 4 files except the PIT file.
Should i also try to load the PIT file? How to load a PIT file what should i do, should i check the partition option in ODIN with PIT file. What should i do, is it any solution? of this restart again and again, i also tried to wipe cache in recovery, now my phone is able to run into the recovery.
Thanks a million time.
dradil said:
Thank you so much. I have downloaded the file. and tried to update it and i was able to flash it and phone booted well, but it restarts again and again. it happens with all the file. Thank you so much for this atleast phone booted. I loaded all the 4 files except the PIT file.
Should i also try to load the PIT file? How to load a PIT file what should i do, should i check the partition option in ODIN with PIT file. What should i do, is it any solution? of this restart again and again, i also tried to wipe cache in recovery, now my phone is able to run into the recovery.
Thanks a million time.
Click to expand...
Click to collapse
Put every file in his right section and load the pit, in Odin there is a menu hidden by a button on the left, one of the three let you load the pit (now I don't remember very well the interface hahah give a try)
Kundinga said:
Put every file in his right section and load the pit, in Odin there is a menu hidden by a button on the left, one of the three let you load the pit (now I don't remember very well the interface hahah give a try)
Click to expand...
Click to collapse
Thank you once agian for the reply.
Should i check the "re-partition option" after loading the PIT and then Start?