I was trying to recover my Samsung Galaxy note 2 from soft brick status. so I tried to install new CWM recovery mode. it looks like something happened in the middle of the installation and now I started to get pit related errors in oden and the screen turned blank white when turning ON my phone.
I read in some places that I need to use new pit file to re-partition my phone. however I tried to download countless pit files from the net but none of them worked even the one I found here http://forum.xda-developers.com/showpost.php?p=31801134&postcount=4
I'm getting the same error as oden log below:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
can anyone help me please.
No reply
It looks like this is the least interesting question in the whole community, after it has been posted for more than 4 days and seen by more than 120 people no one has ever replied!!
Please guys, if you have any suggestion, Kindly dly share it.
Related
I recently found out I soft bricked my phone after browsing through the forums. I looked up for the solution and it turns out that I need to reset it back, no problem with that so I installed odin back again (I rooted my phone before so I had it). I first downloaded the official firmware from sammobile or some site like that and I downloaded a PIT file for my phone because the tutorial said it was essential when resetting a smartphone. I followed every step but when I launch odin and select the required tick boxes and the PDA PITi I start it. It starts up but in the middle of the loading I shows up the DO NOT TURN OFF THE TARGET!!! message and It stops.
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is the error and I can't seem tı get past it. I really need to deal with this quickly so if any of you have a solution, ı would appreciate it. Thanks
Anyone has the same issue? I need to fix this ASAP.
a
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
Now the error goes like this and nothing more.
aqertmen said:
Anyone has the same issue? I need to fix this ASAP.
Click to expand...
Click to collapse
I'm getting the exact same problem, can't fix it
Have you made any progress?
Thanks.
aqertmen said:
I recently found out I soft bricked my phone after browsing through the forums. I looked up for the solution and it turns out that I need to reset it back, no problem with that so I installed odin back again (I rooted my phone before so I had it). I first downloaded the official firmware from sammobile or some site like that and I downloaded a PIT file for my phone because the tutorial said it was essential when resetting a smartphone. I followed every step but when I launch odin and select the required tick boxes and the PDA PITi I start it. It starts up but in the middle of the loading I shows up the DO NOT TURN OFF THE TARGET!!! message and It stops.
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is the error and I can't seem tı get past it. I really need to deal with this quickly so if any of you have a solution, ı would appreciate it. Thanks
Click to expand...
Click to collapse
doc1975 said:
I'm getting the exact same problem, can't fix it
Have you made any progress?
Thanks.
Click to expand...
Click to collapse
Hi
Do you have a custom recovery?
Which phonemodel do you have?
U can install TWRP through Odin using a tar file. Go to TWRP and search your model, get the tar file and install it.
From TWRP u can sideload a rom using ADB.
You can push files to the phone using it, that way u can push the rom to the phone and install it through TWRP.
A long way around but worth trying when all else fail.
Hello, I'm a Noob to phone recovery and I think I've bitten off more than I can chew.
So I usually use a T mobile Galaxy S II but I wanted to upgrade to a Note II. My Flash -addicted friend gave me one that he believed he had "Bricked" beyond repair, but after reading around the forums I found that where there is Odin there is a way, I said I would try to recover it.
Well I'm not getting anywhere:crying: . on the Note II it shows:
ODIN MODE
PRODUCT NAME:
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
And on Odin 3.7 I keep getting:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I rebooted and retried and I got:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping...
and it hung there for the better par of the day.
I have a pit file I got from http://forum.xda-developers.com/showthread.php?t=2071403 and I have used multiple roms. I have tried clicking and unclicking re partition. I Have only Odin Mode, no recovery, and when I boot it on, it does not move pass the Samsung Galaxy Note II screen; no Android,no anything. I am also working on a Windows 7 Home Edition Laptop. I have a totally unrooted , straight from T mo Galaxy 2 that works perfectly at hand I can use to "copy" (It's my roommates) but I just needs some direction as to how.
Again , I am new to this and I apologize if this is a duplication. If there are answers in other forums, please link them here for me please. Thanks for all the time and direction in advance!
Cheshire_Ci86 said:
Hello, I'm a Noob to phone recovery and I think I've bitten off more than I can chew.
So I usually use a T mobile Galaxy S II but I wanted to upgrade to a Note II. My Flash -addicted friend gave me one that he believed he had "Bricked" beyond repair, but after reading around the forums I found that where there is Odin there is a way, I said I would try to recover it.
Well I'm not getting anywhere:crying: . on the Note II it shows:
ODIN MODE
PRODUCT NAME:
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
And on Odin 3.7 I keep getting:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I rebooted and retried and I got:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping...
and it hung there for the better par of the day.
I have a pit file I got from http://forum.xda-developers.com/showthread.php?t=2071403 and I have used multiple roms. I have tried clicking and unclicking re partition. I Have only Odin Mode, no recovery, and when I boot it on, it does not move pass the Samsung Galaxy Note II screen; no Android,no anything. I am also working on a Windows 7 Home Edition Laptop. I have a totally unrooted , straight from T mo Galaxy 2 that works perfectly at hand I can use to "copy" (It's my roommates) but I just needs some direction as to how.
Again , I am new to this and I apologize if this is a duplication. If there are answers in other forums, please link them here for me please. Thanks for all the time and direction in advance!
Click to expand...
Click to collapse
did u ever get the pit file?
I don't know if it matters or not, but I think you should use Odin ver.1.85.
If I'm wrong, somebody please correct me.
Sent from my SGH-T889 using xda premium
Hi I'm new to android phones ...
Right so got myself note 2 and yesterday phone went off...
And now is stuck on Samsung Galaxy note 2 GT-n7100 screen please see attachemnts for pics
I can but phone into download screen but not into reboot one ..
I did try 4 odin software and install different rooms but with no luck always had partition error .
How i can get it to work
Any one have link to stock rom 4.1.1 ?
Please help
Try rootking it via odin
@<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)@
I have bricked my S3 before and have successfully unbricked it. This time is very much unlike the last, however. To start with, I don't know what caused the brick. My S3 has been working perfectly on rooted stock firmware for several months. The day it bricked, I was using it normally and hit the power button for it to go to sleep. 3 hours later I noticed I hadn't heard any notifications and I found that my phone wasn't turning on. So for starters, I don't even know what caused my phone to become bricked.
Anywho, I located the unbrick img, booted into Linux, and flashed the image to an SD card. Popped that into the S3 and....nothing. After some searching I found there was a specific unbrick img for the new bootloader that came with the KK updates. After flashing that image to the SD and popping it in the S3 I was greeted with the "Boot Recovery Mode" which appears to transfer to Odin Mode just fine.
I open Odin 3.07 and tried flashing the factory reset tar for NJ2 and I get this:
Code:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
So I found 2 different PIT files for my Sprint Galaxy S3 16GB. Both give me this error:
Code:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried this in Odin 3.09 and even 1.85 just to see if any of that would magically work. Nope. I saw several users report that rebooting the phone/PC would get the PIT to flash but nothing on that front either. So I'm guessing that means the PIT files are bad but I find that a little difficult to believe. I also noticed that Odin 1.85 reports the device as "Android+SLP" and not an S3. I also read about the S3 having a problem with its eMMC and that it would need to be shipped away for motherboard surgery. So I'm prepared to call the time of death on this phone but I figured I would give one last ditch attempt by presenting my situation to the genius collective of XDA. Any suggestions?
Hi mates.
Earlier today my phone is get soft bricked. It just makes boot looping, i restart it few times then it cant loop anymore. I can get into download mode clearly but other screens looks like grey stripes onto white screen. How can i fix it? Also i tried odin to get stock rom i get this;
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
(I tried 5 different pit files.)