Hi mates.
Earlier today my phone is get soft bricked. It just makes boot looping, i restart it few times then it cant loop anymore. I can get into download mode clearly but other screens looks like grey stripes onto white screen. How can i fix it? Also i tried odin to get stock rom i get this;
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
(I tried 5 different pit files.)
Related
Please be gentle; I'm new.
See the following:
THIS IS WHAT I GOT WHEN I FLASHED THE STOCK KERNEL<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
THIS IS WHAT I GET EVERY FREAKIN TIME I TRY TO GO BACK TO STOCK USING
SPH-D700-DG27-8Gb-REL.tar<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> param.lfs
<ID:0/005> Sbl.bin
<ID:0/005> boot.bin
<ID:0/005> recovery.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I don't know what to do anymore :-( I'm at a loss. I've read all the posts; I've read all the tricks; and nada. I can't even access the recovery module in my phone. The only thing I can access is the download screen (1 + power button). The (volume down + camera + power button) stopped working. All I get when I press the power button is the Samsung Logo and that's it. I've changed usb ports, I've restarted the computer and phone, I've tried using different odin versions and in different windows settings (ie XP SP 2, Admin etc).
Is there anyone out there who can help me save a $100 bucks?
Thanks
-CNT
FYI: I use to have the Viperrom Trinity v3.0.3 and even the ViperROM [TRiNiTY v2.0] EXT4-RFS Dual DK28 4.0.4 at one point. <sigh>
This is a question, so it should go int the q&a section, not development.
As long as you can get into download mode you should still be able to recover the phone.
I think there's an official sprint updater somewhere you can try using instead of ODIN that might help...
You might try a different computer. Install the Galaxy S drivers, and use Odin there...
Moved to Q&A.
I would try Odin'ing to EB13 prerooted with CWM3 so you can put on any ROM after that from the link here:
http://forum.xda-developers.com/showthread.php?t=853209
Use the second one down for CWM3.
I was trying to recover my Samsung Galaxy note 2 from soft brick status. so I tried to install new CWM recovery mode. it looks like something happened in the middle of the installation and now I started to get pit related errors in oden and the screen turned blank white when turning ON my phone.
I read in some places that I need to use new pit file to re-partition my phone. however I tried to download countless pit files from the net but none of them worked even the one I found here http://forum.xda-developers.com/showpost.php?p=31801134&postcount=4
I'm getting the same error as oden log below:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
can anyone help me please.
No reply
It looks like this is the least interesting question in the whole community, after it has been posted for more than 4 days and seen by more than 120 people no one has ever replied!!
Please guys, if you have any suggestion, Kindly dly share it.
Hello guys..
I got a problem, i baaically cant flash a stock rom on my tab 3 LTE
Any help is appreciated
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1<ID:0/005> Added!!
A friend gave me his S6 Edge (SM-G925T) becuase of some software problems he had. The phone have the lollipop 5.1.1 and when I try to flash a stock ROM Odin give this error:
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I downloaded the stock firmware from here in xda (http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841) and know I'am downloading it from Sammobile but I'am downloading 6.0 and I takes a long time and I don't want to wait like 3 hours for it to download
HELP
So the obligatory "I already searched and read the guides etc."
Now with that out of the way, a customer brought me his FRP locked phone with receipt, and asked me to just unock it and get it back to stock. I've followed the guides, flashed the combo files, but now when I go to flash back to stock, Odin fails every time, sometimes a "model dismatch" sometimes an "auth" issue. I am just totally stumped and I'm about 12 working hours into this. At first i was trying to flash stock firmware with a lower BL# than the combo I used (4), realizing my error I downloaded "AP_G955USQU4CRE9_CL13663186_QB18278383_REV01_user_low_ship_MULTI_CERT_meta.tar.md5" still to no avail. All relevant info below, any help at all would be greatly appreciated.
This morning's ODIN error:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Erase...
<ID:0/005> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
Images of phone info attached
Also, ive tried 4 usb-c cables, and two computers, windows 7 and 10. same results
Edit: This is the other way it fails even though it shows "success"
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1205)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> abl.elf.lz4
<ID:0/005> bksecapp.mbn.lz4
<ID:0/005> xbl.elf.lz4
<ID:0/005> tz.mbn.lz4
<ID:0/005> hyp.mbn.lz4
<ID:0/005> devcfg.mbn.lz4
<ID:0/005> pmic.elf.lz4
<ID:0/005> rpm.mbn.lz4
<ID:0/005> cmnlib.mbn.lz4
<ID:0/005> cmnlib64.mbn.lz4
<ID:0/005> keymaster.mbn.lz4
<ID:0/005> apdp.mbn.lz4
<ID:0/005> msadp.mbn.lz4
<ID:0/005> sec.dat.lz4
<ID:0/005> NON-HLOS.bin.lz4
<ID:0/005> storsec.mbn.lz4
<ID:0/005> boot.img.lz4
<ID:0/005> recovery.img.lz4
<ID:0/005> system.img.ext4.lz4
<ID:0/005> persist.img.ext4.lz4
<ID:0/005> modem.bin.lz4
<ID:0/005> adspso.bin.lz4
<ID:0/005> cache.img.ext4.lz4
<ID:0/005> Home Binary Download
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
and yet another:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 4645 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> abl.elf
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)