Hello guys..
I got a problem, i baaically cant flash a stock rom on my tab 3 LTE
Any help is appreciated
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1<ID:0/005> Added!!
Related
its stuck here
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response form LOKE
<ID:0/005> cache.rfs
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response form LOKE
<ID:0/005> datafs.rfs
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response form LOKE
<ID:0/005> factoryfs.rfs
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
what do i do?
What are you flashing? I would say use another cable, but your past the point of a cable not working. I would suggest hitting repartition, set the pit with the victory pit file, Odin EC05, see if that works, if so go from there.
Can u still get into download mode. I had that issue earlier tonight. All I did was close Odin then unplug then took the battery and SD card out plugged my phone in with no battery and SD card hit 1 and power button at the same time and download mode came up. So I flashed back to stock ec05 and reroot and back on cm7.
Sent from my SPH-D700 using XDA Premium App
was doing EG22 and it just now failed now i cant boot
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.rfs
<ID:0/005> datafs.rfs
<ID:0/005> Removed!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
got it now
wj0t said:
got it now
Click to expand...
Click to collapse
Ok good. Glad it worked
Sent from my SPH-D700 using XDA Premium App
When I follow the guide(http://forum.xda-developers.com/showthread.php?t=1822308&highlight=guide) strictly, something strange happened.
next is the failure on Odin:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Please give me some help! Very appreciated！
Try again
http://forum.xda-developers.com/showthread.php?t=1739426
Sent from my SAMSUNG-SGH-I747 using xda premium
A friend gave me his S6 Edge (SM-G925T) becuase of some software problems he had. The phone have the lollipop 5.1.1 and when I try to flash a stock ROM Odin give this error:
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I downloaded the stock firmware from here in xda (http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841) and know I'am downloading it from Sammobile but I'am downloading 6.0 and I takes a long time and I don't want to wait like 3 hours for it to download
HELP
So the obligatory "I already searched and read the guides etc."
Now with that out of the way, a customer brought me his FRP locked phone with receipt, and asked me to just unock it and get it back to stock. I've followed the guides, flashed the combo files, but now when I go to flash back to stock, Odin fails every time, sometimes a "model dismatch" sometimes an "auth" issue. I am just totally stumped and I'm about 12 working hours into this. At first i was trying to flash stock firmware with a lower BL# than the combo I used (4), realizing my error I downloaded "AP_G955USQU4CRE9_CL13663186_QB18278383_REV01_user_low_ship_MULTI_CERT_meta.tar.md5" still to no avail. All relevant info below, any help at all would be greatly appreciated.
This morning's ODIN error:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Erase...
<ID:0/005> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
Images of phone info attached
Also, ive tried 4 usb-c cables, and two computers, windows 7 and 10. same results
Edit: This is the other way it fails even though it shows "success"
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1205)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> abl.elf.lz4
<ID:0/005> bksecapp.mbn.lz4
<ID:0/005> xbl.elf.lz4
<ID:0/005> tz.mbn.lz4
<ID:0/005> hyp.mbn.lz4
<ID:0/005> devcfg.mbn.lz4
<ID:0/005> pmic.elf.lz4
<ID:0/005> rpm.mbn.lz4
<ID:0/005> cmnlib.mbn.lz4
<ID:0/005> cmnlib64.mbn.lz4
<ID:0/005> keymaster.mbn.lz4
<ID:0/005> apdp.mbn.lz4
<ID:0/005> msadp.mbn.lz4
<ID:0/005> sec.dat.lz4
<ID:0/005> NON-HLOS.bin.lz4
<ID:0/005> storsec.mbn.lz4
<ID:0/005> boot.img.lz4
<ID:0/005> recovery.img.lz4
<ID:0/005> system.img.ext4.lz4
<ID:0/005> persist.img.ext4.lz4
<ID:0/005> modem.bin.lz4
<ID:0/005> adspso.bin.lz4
<ID:0/005> cache.img.ext4.lz4
<ID:0/005> Home Binary Download
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
and yet another:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 4645 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> abl.elf
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hello!
Can i flash stock samsung os from samfw over odin to locked bootloader phone?
i have loots of bloatware on my phone from carier and i want to flash a clean , no carier apps os
thanks for help!
and please forgive me for my bad eng
Yes you can.
arcangells said:
Yes you can.
Click to expand...
Click to collapse
I tried to downgrade from October UI2.5 update to UI2.1 May and Odin 3 fails. Any idea why?
Here's log from Odin:
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 8337 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> abl.elf
<ID:0/005> xbl.elf
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My purpose is to downgrade so I can get MirrorLink working
BR
JHS
-JHS- said:
I tried to downgrade from October UI2.5 update to UI2.1 May and Odin 3 fails. Any idea why?
Here's log from Odin:
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 8337 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> abl.elf
<ID:0/005> xbl.elf
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My purpose is to downgrade so I can get MirrorLink working
BR
JHS
Click to expand...
Click to collapse
You cannot downgrade version in odin