Can i flash stock on locked bootloader ? - Samsung Galaxy A71 Guides, News, & Discussion

Hello!
Can i flash stock samsung os from samfw over odin to locked bootloader phone?
i have loots of bloatware on my phone from carier and i want to flash a clean , no carier apps os
thanks for help!
and please forgive me for my bad eng

Yes you can.

arcangells said:
Yes you can.
Click to expand...
Click to collapse
I tried to downgrade from October UI2.5 update to UI2.1 May and Odin 3 fails. Any idea why?
Here's log from Odin:
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 8337 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> abl.elf
<ID:0/005> xbl.elf
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My purpose is to downgrade so I can get MirrorLink working
BR
JHS

-JHS- said:
I tried to downgrade from October UI2.5 update to UI2.1 May and Odin 3 fails. Any idea why?
Here's log from Odin:
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 8337 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> abl.elf
<ID:0/005> xbl.elf
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My purpose is to downgrade so I can get MirrorLink working
BR
JHS
Click to expand...
Click to collapse
You cannot downgrade version in odin

Related

cant flash stock rom by using odin or kies

Hello guys..
I got a problem, i baaically cant flash a stock rom on my tab 3 LTE
Any help is appreciated
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1<ID:0/005> Added!!

Help with this error

A friend gave me his S6 Edge (SM-G925T) becuase of some software problems he had. The phone have the lollipop 5.1.1 and when I try to flash a stock ROM Odin give this error:
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I downloaded the stock firmware from here in xda (http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841) and know I'am downloading it from Sammobile but I'am downloading 6.0 and I takes a long time and I don't want to wait like 3 hours for it to download
HELP

help phone stuck on samsung logo

i attempted to root my phone and now it is stuck on the samsung logo i am pretty sure i need the firmware update G928AUCS4CPK1 but i am not sure what else to do please help
Bump.. please help kinda lost here
odin info
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> param.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
theimmortalsin said:
i attempted to root my phone and now it is stuck on the samsung logo i am pretty sure i need the firmware update G928AUCS4CPK1 but i am not sure what else to do please help
Click to expand...
Click to collapse
https://uploadgig.com/file/download/6e8dC5ad02c91124/G928A_ATT_G928AUCS4CPK1_G928AATT4CPK1.zip
here's the firmware link.i too wanna update mine to this.
can you check this?
and this site does contain some older versions too.

Issue flashing to stock, please help

So the obligatory "I already searched and read the guides etc."
Now with that out of the way, a customer brought me his FRP locked phone with receipt, and asked me to just unock it and get it back to stock. I've followed the guides, flashed the combo files, but now when I go to flash back to stock, Odin fails every time, sometimes a "model dismatch" sometimes an "auth" issue. I am just totally stumped and I'm about 12 working hours into this. At first i was trying to flash stock firmware with a lower BL# than the combo I used (4), realizing my error I downloaded "AP_G955USQU4CRE9_CL13663186_QB18278383_REV01_user_low_ship_MULTI_CERT_meta.tar.md5" still to no avail. All relevant info below, any help at all would be greatly appreciated.
This morning's ODIN error:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Erase...
<ID:0/005> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
Images of phone info attached
Also, ive tried 4 usb-c cables, and two computers, windows 7 and 10. same results
Edit: This is the other way it fails even though it shows "success"
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1205)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> abl.elf.lz4
<ID:0/005> bksecapp.mbn.lz4
<ID:0/005> xbl.elf.lz4
<ID:0/005> tz.mbn.lz4
<ID:0/005> hyp.mbn.lz4
<ID:0/005> devcfg.mbn.lz4
<ID:0/005> pmic.elf.lz4
<ID:0/005> rpm.mbn.lz4
<ID:0/005> cmnlib.mbn.lz4
<ID:0/005> cmnlib64.mbn.lz4
<ID:0/005> keymaster.mbn.lz4
<ID:0/005> apdp.mbn.lz4
<ID:0/005> msadp.mbn.lz4
<ID:0/005> sec.dat.lz4
<ID:0/005> NON-HLOS.bin.lz4
<ID:0/005> storsec.mbn.lz4
<ID:0/005> boot.img.lz4
<ID:0/005> recovery.img.lz4
<ID:0/005> system.img.ext4.lz4
<ID:0/005> persist.img.ext4.lz4
<ID:0/005> modem.bin.lz4
<ID:0/005> adspso.bin.lz4
<ID:0/005> cache.img.ext4.lz4
<ID:0/005> Home Binary Download
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
and yet another:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 4645 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> abl.elf
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

installing TWRP

hi every one
i am facing an error during installing TWRP using odin
i installed the usb drivers aslo i used twrp-3.3.1-0-starlte.img.tar
so why it fail:crying::
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 39 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
What version of Odin?
basicreece said:
What version of Odin?
Click to expand...
Click to collapse
Tells you in the log, 3.13.1
ahmadsiddeeq0 said:
hi every one
i am facing an error during installing TWRP using odin
i installed the usb drivers aslo i used twrp-3.3.1-0-starlte.img.tar
so why it fail:crying::
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 39 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Click to expand...
Click to collapse
Hi there,
I have the same issue now after a crash during rom installation,
have you find a solution ? anyone have a solution ?
I'm totaly stuck ...
thanks.
PS: sorry for my english
jon_d8vis_69 said:
Hi there,
I have the same issue now after a crash during rom installation,
have you find a solution ? anyone have a solution ?
I'm totaly stuck ...
thanks.
PS: sorry for my english
Click to expand...
Click to collapse
so, your phone wont boot to the OS at all?
jon_d8vis_69 said:
Hi there,
I have the same issue now after a crash during rom installation,
have you find a solution ? anyone have a solution ?
I'm totaly stuck ...
thanks.
PS: sorry for my english
Click to expand...
Click to collapse
just go back to stock rom

Categories

Resources