Related
Hi friends,
I hope you guys are able to help, I have spent the whole day trying to fix my phone. So it all started when I flashed a radio that didn't work (I had SuperCID). After that, I tried different radios and flashed a radio that had the same version with my stock radio and none of them worked. So I decided to restore my phone to stock factory settings by downloading a stock backup from here (2.22.707.4 - TWRP Thanks to ckpv5) and the latest firmware from here (2.22.707.4_firmware.zip).
I flashed the firmware first twice, successfully and the restore the stock backup from TWRP and it got into a bootloop. However if i flash a custom GPE rom, it boots successfully but Baseband/IMEI becomes unknown.
I'm not sure what else to do now :crying:
I've tested installing a custom Sense based rom and GPE based rom, the Sense custom rom will get stuck in a boot loop but the custom GPE rom won't have issues. Except for the Baseband unknown version and IMEI unknown.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.16.2133156.UA10G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.22.707.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B11000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 5e4b24e4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Good news!
I managed to resolved the issue by downloading the Taiwan (HTC__621 / 1.54.709.4): 1.15.2133156.UA14G_20.18n.4096.05L radio from http://forum.xda-developers.com/showthread.php?t=2736921
Before I flashed the radio, I had configured my phone to SuperCID 11111111. I didn't clear any caches after the flash, not sure if that matters.
I haven't checked on why Sense roms are boot looping but I'm happy with a GPE rom without any issues. So I'll just stick with that for the time being
CyanogenMod 14.1 ROM
Hi, I have installed turkey den m8 my phone m8 i am unable to use the overseas product phone anymore Baseband Version / IMEI unknown error please help
did you got a solution for this problem.. Even i have the same issue.
RedroseTR said:
CyanogenMod 14.1 ROM
Hi, I have installed turkey den m8 my phone m8 i am unable to use the overseas product phone anymore Baseband Version / IMEI unknown error please help
Click to expand...
Click to collapse
did you got a solution for this problem.. Even i have the same issue.
hcazzz said:
Good news!
I managed to resolved the issue by downloading the Taiwan (HTC__621 / 1.54.709.4): 1.15.2133156.UA14G_20.18n.4096.05L radio from http://forum.xda-developers.com/showthread.php?t=2736921
Before I flashed the radio, I had configured my phone to SuperCID 11111111. I didn't clear any caches after the flash, not sure if that matters.
I haven't checked on why Sense roms are boot looping but I'm happy with a GPE rom without any issues. So I'll just stick with that for the time being
Click to expand...
Click to collapse
Hi, am having same issue, i can't even get network on my phone, i tried going to the link to download the radio you mentioned. but unfortunately it has been removed by google. Please if you can upload the radio somewhere and share
morizhtc said:
Hi, am having same issue, i can't even get network on my phone, i tried going to the link to download the radio you mentioned. but unfortunately it has been removed by google. Please if you can upload the radio somewhere and share
Click to expand...
Click to collapse
what variant you have ???
you can't flash a random radio.img
you need the one compatible with your device variant
so what is your cid&mid ??
also what is your version main ?
better than that just post the result of fastboot getvar all after removing serialno and imei
ahmed.ismael said:
what variant you have ???
you can't flash a random radio.img
you need the one compatible with your device variant
so what is your cid&mid ??
also what is your version main ?
better than that just post the result of fastboot getvar all after removing serialno and imei
Click to expand...
Click to collapse
variant: sprint
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.0209
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: 123456789012
(bootloader) imei: 355195000000010
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: mec_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0PAJ5****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 5c9466dd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.020s
morizhtc said:
variant: sprint
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.0209
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: mec_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0PAJ5****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 5c9466dd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.020s
Click to expand...
Click to collapse
you don't even have the m8 you have htc one e8 device
don't flash anything from this thread or forum search about your specific device forum
or search on htc website http://www.htc.com/us/support/rom-downloads.html#sprint
ahmed.ismael said:
you don't even have the m8 you have htc one e8 device
don't flash anything from this thread or forum search about your specific device forum
or search on htc website http://www.htc.com/us/support/rom-downloads.html#sprint
Click to expand...
Click to collapse
already tried that firmware for sprint e8 and it says unsupported rom type and i even downloaded lower versions of software too
morizhtc said:
already tried that firmware for sprint e8 and it says unsupported rom type and i even downloaded lower versions of software too
Click to expand...
Click to collapse
yeah there is an error on the website it redirect to a9 not e8
take a look at this thread and flash the latest RUU
https://forum.xda-developers.com/one-e8/development/ruu-sprint-htc-one-e8-1-22-651-1-stock-t2952981
you have a heavy modified device even the serialno,meid and imei have been modified
try with the linked thread it's for your device
ahmed.ismael said:
yeah there is an error on the website it redirect to a9 not e8
take a look at this thread and flash the latest RUU
https://forum.xda-developers.com/one-e8/development/ruu-sprint-htc-one-e8-1-22-651-1-stock-t2952981
you have a heavy modified device even the serialno,meid and imei have been modified
try with the linked thread it's for your device
Click to expand...
Click to collapse
already flashed about 2 roms from there and still the same
and if you notice the LINKS to the RUU firmwares takes to to that of HTC one M8 on htc official site
morizhtc said:
already flashed about 2 roms from there and still the same
and if you notice the LINKS to the RUU firmwares takes to to that of HTC one M8 on htc official site
Click to expand...
Click to collapse
The links are direct download for RUUs for your device
You need to sort it either by modify the android-info inside the RUU or revert the supercid and supermid to stock
Please if you have Any further question should be in the thread linked above
Sent from my HTC M8 using XDA Labs
ahmed.ismael said:
The links are direct download for RUUs for your device
You need to sort it either by modify the android-info inside the RUU or revert the supercid and supermid to stock
Please if you have Any further question should be in the thread linked above
Sent from my HTC M8 using XDA Labs
Click to expand...
Click to collapse
thanks for your reply
Can u please give me the Taiwan radio ? the links are dead and i badly need the radio..
HTC One A9 Unknown Baseband help please
Hi guys
I have a problem, sorry for my bad english i am french.
I want to know something, can i upgrade my firmware(i am s-on) i want to have the wifi on the new lolilop rom but i can't
My wifi turn off automaticaly, i think that this is a firmware problem
So, can i upgrade my firmware with s-on ?
And if i can't, what can i do for have the wifi and the 5.0 ?
Thanks you guys
It depends on your region device. If there is a Lollipop OTA already out, you can update firmware even on S-On.
What's your current version ? Post fastboot getvar all result (delete serial no. & imei. no.)
Hey bro
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.19.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 5e4b24e4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.008s
This is what i get, thank's for you help bro
Arkannox said:
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__203
This is what i get, thank's for you help bro
Click to expand...
Click to collapse
Where have you been all this while ?
You already missed two major updates.
You have two choices (actually three choices but I keep one as I see that you're very new here)
1. Restore 2.22.401.5 backup and fastboot flash the stock recovery and do multiple OTA updates from 2.22.401.5 up to the latest lollipop 4.16.401.10
Here are the needed files : http://forum.xda-developers.com/showpost.php?p=54953139&postcount=1676
2. Make a backup of your internal storage as this will wipe everything in your device.
Relock bootloader and run RUU : https://drive.google.com/file/d/0B17smFr95pleeTQ5U1NzNkZzM0U/view
Up to you which you prefer.
Read on many threads about these, I have to be away for few hours. Any question hopefully someone else will assist you.
@nkk71 wrote about the 3rd option ... read : http://forum.xda-developers.com/showpost.php?p=57756709&postcount=20
I prefer the first choice
Sorry but i'm new and i don't understand perfectly how i can restore a backup?
Can you explain to me please?
I have to go on my recovery TWRP and flash the 2.22.401.5_ckpv5.zip ?
Read this thread : http://forum.xda-developers.com/htc-one-m8/help/help-required-htc-m8-running-4-4-2-t3028351
On post #7 I mentioned how to. Just don't download that backup and recovery, use the one that I gave earlier.
He started with 1.60.708.2 but yours is 2.22.401.5, so change those numbers 1.60.708.2 with yours 2.22.401.5 when you read it.
Gotta go now ... good luck
Bro, thank's you sooooooo much love you
I followed the instructions fine and never hit a snag, upgrading from Android 4.4.4 stock but rooted to the latest ARHD running Android 5.0.1. I'm not sure if the issue is related to the lollipop update or the rom but once my phone screen locks I lose my WiFi connection. I can go into WiFi and see the available networks, select my one and click connect but nothing happens, the only way to get WiFi working again is to restart the phone which is becoming really frustrating. I have tried forgetting the network then re adding it too but the issue remains. Anyone else had this problem or know of a fix?
On a less annoying note when iIstart up it first acts like it's loafing bootloader with the red text at the bottom of the screen then restarts itself and boots fine.
Firmware Update
Stock rom - ota or s-off flash fastboot
Htc One M8 & Tapatalk
linar10 said:
Firmware Update
Stock rom - ota or s-off flash fastboot
Htc One M8 & Tapatalk
Click to expand...
Click to collapse
Thanks, could you help a little more? I have been reading up but dont fully understand how i know which firmware i need to flash?
enter result of this command
fastboot getvar all
Edit
I suggest you read this topic
http://forum.xda-developers.com/showthread.php?t=2800727
Htc One M8 & Tapatalk
Thanks for getting back to me - I have read that thread but it still doesn't seem to tell me how i work out which firmware I need or im being silly?
If you can point me in the right direction, here was my result:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Also could I get it to install under ARHD but with the stock recovery instead of TWRP?
linar10 said:
enter result of this command
fastboot getvar all
Edit
I suggest you read this topic
http://forum.xda-developers.com/showthread.php?t=2800727
Htc One M8 & Tapatalk
Click to expand...
Click to collapse
t3stin said:
Thanks for getting back to me - I have read that thread but it still doesn't seem to tell me how i work out which firmware I need or im being silly?
If you can point me in the right direction, here was my result:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH43VWM09276
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Also could I get it to install under ARHD but with the stock recovery instead of TWRP?
Click to expand...
Click to collapse
Your HTC is WWE and your bootloader is at 3.19 so i suggest to restore a stock backup from here
http://forum.xda-developers.com/showthread.php?t=3086860
Take the 4.16.401.10, that will work. And if you also put back the stock recovery you can also perform official OTA updates.
READ the opening post very carefully as its very good explained !
1.22 radio - firmware 3xxxx
Hboot 3.19 - firmware 3xxx - 4xxxx
Restore backup 3xxx
Flash stock recovery
Ota
Htc One M8 & Tapatalk
Im now back to stock, running the latest firmware - no more updates available and though it was fixed but the wifi has just dropped out and had to restart to get it back (I can see the network it just will not connect). Does this mean it is a Lollipop issue?
Mr Hofs said:
Your HTC is WWE and your bootloader is at 3.19 so i suggest to restore a stock backup from here
http://forum.xda-developers.com/showthread.php?t=3086860
Take the 4.16.401.10, that will work. And if you also put back the stock recovery you can also perform official OTA updates.
READ the opening post very carefully as its very good explained !
Click to expand...
Click to collapse
This backup restore
https://mega.nz/#!uoMHBCZQ!167M3qO9hYCMpeB-aFBrYXgJB459c_bM8I9WJt5Cc7g
Recovery stock
https://mega.nz/#!61llVa5Z!cUFoUaQBRCjX0YOA24GogtkhS_nkMMSK_erc5JvK3lM
Htc One M8 & Tapatalk
t3stin said:
Im now back to stock, running the latest firmware - no more updates available
Click to expand...
Click to collapse
Does that mean you installed an OTA update after returning to stock nandroid and stock recovery?
redpoint73 said:
Does that mean you installed an OTA update after returning to stock nandroid and stock recovery?
Click to expand...
Click to collapse
Correct..
restoring backup which version, if 4xxx restore that which I have given above
Htc One M8 & Tapatalk
t3stin said:
Correct..
Click to expand...
Click to collapse
Post the current getvar all.
Also, you should delete the serial number from your last getvar all (and the new one, of course) as that is personal info.
You may need to OTA again. I think some OTAs had WiFi broken, even on fully stock devices; and it was fixed on a subsequent OTA.
If you restore a backup 4xx10 and made Ota to 4xx13 he did not update the firmware. Must restore the backup 3xxx and make ota. This will solve the problems with wifi.
HtcOneM8 @ Tapatalk
linar10 said:
If you restore a backup 4xx10 and made Ota to 4xx13 he did not update the firmware. Must restore the backup 3xxx and make ota. This will solve the problems with wifi.
Click to expand...
Click to collapse
I was thinking along those lines (why I asked for updated getvar data) as the radio number indicates 3.xx firmware.
But I am surprised up updated at all, with the improper (old) firmware.
I do not see any other reason malfunction wifi, in addition to hardware failure.
The last ota was not large, so it may be that it could be downloaded. Let's wait author may write off something that already everything is running or not
HtcOneM8 @ Tapatalk
Sorry havent been able to get online since - I just tried to download the files you linked to and they are no longer available?
linar10 said:
This backup restore
https://mega.nz/#!uoMHBCZQ!167M3qO9hYCMpeB-aFBrYXgJB459c_bM8I9WJt5Cc7g
Recovery stock
https://mega.nz/#!61llVa5Z!cUFoUaQBRCjX0YOA24GogtkhS_nkMMSK_erc5JvK3lM
Htc One M8 & Tapatalk
Click to expand...
Click to collapse
tried restoring to a 3.xxx and im stuck on the boot screen.
redpoint73 said:
I was thinking along those lines (why I asked for updated getvar data) as the radio number indicates 3.xx firmware.
But I am surprised up updated at all, with the improper (old) firmware.
Click to expand...
Click to collapse
gone back to 4.xxx took the OTA again - getvar:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.401.13
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: f063fb42
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
redpoint73 said:
Post the current getvar all.
Also, you should delete the serial number from your last getvar all (and the new one, of course) as that is personal info.
You may need to OTA again. I think some OTAs had WiFi broken, even on fully stock devices; and it was fixed on a subsequent OTA.
Click to expand...
Click to collapse
Hi all, I seem to be going around in circles on this.
Basically I returned my M8 to stock and it was all working fine however was on an old version of android.
The phone said there was an update which I installed. Ever since the wireless will not turn on.
I have read some posts on here that if I could upgrade it to the next firmware level (2.26.61.1) the wireless would start working.
However you can only update over wifi or the pc link. I have tried to get the pc link to work. The best I got was the connection working and the download started but stayed at 0% so it clearly wasn't working.
I tried to browse the web also but that didn't work either.
I have done three factory reboots not and it will not enable.
Is there another way of tackling this?
Post your fastboot getvar all result without serial & imei no.
We'll see what actually that you need.
ckpv5 said:
Post your fastboot getvar all result without serial & imei no.
We'll see what actually that you need.
Click to expand...
Click to collapse
Thanks
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.21331147A1.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: ORANG001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.007s
Your problem is wrong software version that you restored that's why no wifi.
What you need is 4.19.61.2
Install TWRP 2.8.7.0
Restore 4.19.61.2 backup
Install 4.19.61.2 stock recovery
Check OTA
How-to and needed files you can get them here :
http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
ckpv5 said:
Your problem is wrong software version that you restored that's why no wifi.
What you need is 4.19.61.2
Install TWRP 2.8.7.0
Restore 4.19.61.2 backup
Install 4.19.61.2 stock recovery
Check OTA
How-to and needed files you can get them here :
http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
Click to expand...
Click to collapse
Perfect! Thank you very much
I have an htc one m8 ATT phone I want to install the ViperOneM8 5.02 rom on which says I need to update the firmware to a marshmellow firmware I think.
Or the latest.
While I have found some documentation how to do this on the net, I am not sure where I obtain these files.
The firmware.zip I believe it is
Help on this would be appreciated
Right now I am using hboot 3.16 and twrp 2.7
I found this link
http://android-revolution-hd.blogspot.com/p/android-revolution-hd-mirror-site-var.html
https://www.androidfilehost.com/?w=files&flid=32780
and grabbed the 4.16.1540.8.zip but want to make sure I am grabbing the correct and latest version. Because I don't want to brick my phone
Post your fastboot getvar all result without serial & imei no.
You may need a different firmware if it's AT&T & S-On and also don't use that outdated 2.7 TWRP.
ckpv5 said:
Post your fastboot getvar all result without serial & imei no.
You may need a different firmware if it's AT&T & S-On and also don't use that outdated 2.7 TWRP.
Click to expand...
Click to collapse
For some devices, TWRP 2.7 is recommended due to how older boot loaders may not take it well.
I like TWRP. When its workable, its array of tools is superior to CWM. But after I tried 2.8.x, I decided CWM or TWRP at or below 2.7.0.2 is safer and less crash prone.
When I attempted to boot to recovery it would boot loop. Please be mindful of boot signing. If you so slightly make your OEM software notice things a fuse will make your phone implode.
Sent from my HTC M8 GPE
? Mass Transit Honchkrow ?
furboom1240 said:
For some devices, TWRP 2.7 is recommended due to how older boot loaders may not take it well.
Click to expand...
Click to collapse
Read again what he is trying to do man ... he's going to update to Marshmallow firmware and that outdated TWRP 2.7 won't work for him (he can't even install his intended ViperOneM8 5.02 ROM with that outdated TWRP)
..... that's why I said don't use that outdated TWRP
ckpv5 said:
Read again what he is trying to do man ... he's going to update to Marshmallow firmware and that outdated TWRP 2.7 won't work for him (he can't even install his intended ViperOneM8 5.02 ROM with that outdated TWRP)
..... that's why I said don't use that outdated TWRP
Click to expand...
Click to collapse
Good point. For some odd reason CM pairs ROMs and Recoveries. If you check the Dev Auto update option would that be unnecessary.
It's been an itching question I actually had...
Sent from my HTC M8 GPE
? Mass Transit Honchkrow ?
I originally had twrp 2.8 on and tried to install the latest. But it was freezing because I think I need a newer version of hboot. which I have 3.16 on it.
I then downgraded to 2.7 to get it working. I installed ViperOnem8 Rom not reading the website successfully. but have issues with wifi, and 2 minute boot times.
"The 5.0.x ROM is based on HTC’s latest M8 Sense 7 Android 6.0.x base and requires you to update your firmware to at least the 6.0.x (Marshmallow) version! If you don’t you will run into some issues such as Wi-Fi not working or No Boot, etc.
We cannot install the firmware for you during ROM installation so you will need to take the steps to update the firmware on your own."
So I need to update my firmware. I have an ATT S-ON phone. But I have no clue where to get the firmware from, and make sure it is the right one and recent.
I need to update my firmware in order for this rom and a newer version of twrp to work correctly
ok, so
I upgraded to 3.11.1700.5 firmware I found. and that was successful.
Then I upgraded my twrp to twrp-3.0.2-0-m8 and that was successful
Now I am trying to install either Revolution Rom, or ViperOnem8 and both have the same problem. After install they keep booting into twrp and won't load.
I tried Cynamod and that installed and booted fine.
I believe both Revolution and Viper use the Aroma installer. Anyone know what is going on with these and a fix to stop it from booting into twrp?
Need advice
ckpv5 said:
Post your fastboot getvar all result without serial & imei no.
You may need a different firmware if it's AT&T & S-On and also don't use that outdated 2.7 TWRP.
Click to expand...
Click to collapse
This my phone info
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.21331147A1.14G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.34.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B67000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 260ae94e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
Which RUU can I use ?
vertigo262 said:
ok, so
I upgraded to 3.11.1700.5 firmware I found. and that was successful.
Then I upgraded my twrp to twrp-3.0.2-0-m8 and that was successful
I believe both Revolution and Viper use the Aroma installer. Anyone know what is going on with these and a fix to stop it from booting into twrp?
Click to expand...
Click to collapse
Wrong firmware. You installed an old version of GPE firmware.
You can't install Sense ROM like Revolution and Viper on GPE firmware.
I asked you to post fastboot getvar all to help you but it seems that you made it harder now because you installed a wrong firmware. If it is S-Off, then it is easy to fix.
ckpv5 said:
Wrong firmware. You installed an old version of GPE firmware.
You can't install Sense ROM like Revolution and Viper on GPE firmware.
I asked you to post fastboot getvar all to help you but it seems that you made it harder now because you installed a wrong firmware. If it is S-Off, then it is easy to fix.
Click to expand...
Click to collapse
sorry, I must have missed your response. was in phone hell world!
here it is.
this is what it was
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.21331931.LA11G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c3d94491
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
this is now
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.213311491.A04G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.11.1700.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c88f4560
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
vertigo262 said:
sorry, I must have missed your response. was in phone hell world!
here it is.
this is what it was
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.21331931.LA11G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c3d94491
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
this is now
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.213311491.A04G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.11.1700.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c88f4560
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
First - remove all serial & imei no. from your above post.
As I said, it is not easy to fix this with S-On device. What you can try is to install the latest AT&T 6.20.502.5 firmware first then run 6.20.502.5 RUU
Read this for the firmware and how-to : http://forum.xda-developers.com/showpost.php?p=66886759&postcount=23
You can get the RUU here : http://www.htc.com/us/support/htc-one-m8-att/news/
ckpv5 said:
First - remove all serial & imei no. from your above post.
As I said, it is not easy to fix this with S-On device. What you can try is to install the latest AT&T 6.20.502.5 firmware first then run 6.20.502.5 RUU
Read this for the firmware and how-to : http://forum.xda-developers.com/showpost.php?p=66886759&postcount=23
You can get the RUU here : http://www.htc.com/us/support/htc-one-m8-att/news/
Click to expand...
Click to collapse
so your saying, install the ruu, update the firmware, then re install viper?
Can't I just update the firmware like I did before? It was S-On before I updated the firmware
The ruu won't install. it says needs more then 30% battery, yet it is fully charged
vertigo262 said:
so your saying, install the ruu, update the firmware, then re install viper?
Click to expand...
Click to collapse
No .. I don't say that ... read again ...
Flash firmware.zip first then RUU ...
or install ROM first, don't reboot the system, but reboot to bootloader, relock bootloader then flash firmware.zip
As you already flashed a wrong firmware, as I said this may work and may not work but the only way that you can try to fix the wrong firmware installed.
---------- Post added at 02:49 PM ---------- Previous post was at 02:49 PM ----------
vertigo262 said:
The ruu won't install. it says needs more then 30% battery, yet it is fully charged
Click to expand...
Click to collapse
Because you have wrong firmware installed.
but with what firmware.zip? I never got the right firmware.zip to begin with so I don't have any firmware files to update with
vertigo262 said:
but with what firmware.zip? I never got the right firmware.zip to begin with so I don't have any firmware files to update with
Click to expand...
Click to collapse
That show you don't read all the posts that I posted .. the firmware.zip is posted in the post that earlier posted
You have to wait for someone else I guess who can write a post that you can understand .. maybe my English is not good enough ... good luck
ckpv5 said:
First - remove all serial & imei no. from your above post.
As I said, it is not easy to fix this with S-On device. What you can try is to install the latest AT&T 6.20.502.5 firmware first then run 6.20.502.5 RUU
Read this for the firmware and how-to : http://forum.xda-developers.com/showpost.php?p=66886759&postcount=23
You can get the RUU here : http://www.htc.com/us/support/htc-one-m8-att/news/
Click to expand...
Click to collapse
ok .. now that I understand what you are saying. because you had the RUU .exe and also were explaining how to update the firmware at the same time while the firmware was burried a couple of levels of posts, I didn't understand what you were saying.
so it looks like the firmware updated successfully
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.20.502.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I unlocked the firmware through the htc website with the Unlock_code.bin
because fastbook oem unlock didn't work.
had to reinstall twrp and that worked after reinstall. although lots of mounting file system errors. with /Data I don't know if that's normal.
seems to be fixed after formatting
Now I will try installing a rom
vertigo262 said:
had to reinstall twrp and that worked after reinstall. although lots of mounting file system errors. with /Data I don't know if that's normal.
seems to be fixed after formatting
Now I will try installing a rom
Click to expand...
Click to collapse
Now you got it.
And yes, after changing from GPE to Sense GSM (AT&T) firmware, you need to reinstall TWRP (the latest 3.0.2-0) and you MUST format data partition, in TWRP - select WIPE, Format Data - yes ... because GPE & Sense data partition is of different size.
Please where can i get compatible firmware for my htc one m8s with S.O 1.12.1405.6 . I have been on this over 3 weeks now but all no avail.