Develop Bugs

Where to get latest firmware.zip for htc one m8

I have an htc one m8 ATT phone I want to install the ViperOneM8 5.02 rom on which says I need to update the firmware to a marshmellow firmware I think.
Or the latest.
While I have found some documentation how to do this on the net, I am not sure where I obtain these files.
The firmware.zip I believe it is
Help on this would be appreciated
Right now I am using hboot 3.16 and twrp 2.7

I found this link
http://android-revolution-hd.blogspot.com/p/android-revolution-hd-mirror-site-var.html
https://www.androidfilehost.com/?w=files&flid=32780
and grabbed the 4.16.1540.8.zip but want to make sure I am grabbing the correct and latest version. Because I don't want to brick my phone

Post your fastboot getvar all result without serial & imei no.
You may need a different firmware if it's AT&T & S-On and also don't use that outdated 2.7 TWRP.

ckpv5 said:
Post your fastboot getvar all result without serial & imei no.
You may need a different firmware if it's AT&T & S-On and also don't use that outdated 2.7 TWRP.
Click to expand...
Click to collapse
For some devices, TWRP 2.7 is recommended due to how older boot loaders may not take it well.
I like TWRP. When its workable, its array of tools is superior to CWM. But after I tried 2.8.x, I decided CWM or TWRP at or below 2.7.0.2 is safer and less crash prone.
When I attempted to boot to recovery it would boot loop. Please be mindful of boot signing. If you so slightly make your OEM software notice things a fuse will make your phone implode.
Sent from my HTC M8 GPE
? Mass Transit Honchkrow ?

furboom1240 said:
For some devices, TWRP 2.7 is recommended due to how older boot loaders may not take it well.
Click to expand...
Click to collapse
Read again what he is trying to do man ... he's going to update to Marshmallow firmware and that outdated TWRP 2.7 won't work for him (he can't even install his intended ViperOneM8 5.02 ROM with that outdated TWRP)
..... that's why I said don't use that outdated TWRP

ckpv5 said:
Read again what he is trying to do man ... he's going to update to Marshmallow firmware and that outdated TWRP 2.7 won't work for him (he can't even install his intended ViperOneM8 5.02 ROM with that outdated TWRP)
..... that's why I said don't use that outdated TWRP
Click to expand...
Click to collapse
Good point. For some odd reason CM pairs ROMs and Recoveries. If you check the Dev Auto update option would that be unnecessary.
It's been an itching question I actually had...
Sent from my HTC M8 GPE
? Mass Transit Honchkrow ?

I originally had twrp 2.8 on and tried to install the latest. But it was freezing because I think I need a newer version of hboot. which I have 3.16 on it.
I then downgraded to 2.7 to get it working. I installed ViperOnem8 Rom not reading the website successfully. but have issues with wifi, and 2 minute boot times.
"The 5.0.x ROM is based on HTC’s latest M8 Sense 7 Android 6.0.x base and requires you to update your firmware to at least the 6.0.x (Marshmallow) version! If you don’t you will run into some issues such as Wi-Fi not working or No Boot, etc.
We cannot install the firmware for you during ROM installation so you will need to take the steps to update the firmware on your own."
So I need to update my firmware. I have an ATT S-ON phone. But I have no clue where to get the firmware from, and make sure it is the right one and recent.
I need to update my firmware in order for this rom and a newer version of twrp to work correctly

ok, so
I upgraded to 3.11.1700.5 firmware I found. and that was successful.
Then I upgraded my twrp to twrp-3.0.2-0-m8 and that was successful
Now I am trying to install either Revolution Rom, or ViperOnem8 and both have the same problem. After install they keep booting into twrp and won't load.
I tried Cynamod and that installed and booted fine.
I believe both Revolution and Viper use the Aroma installer. Anyone know what is going on with these and a fix to stop it from booting into twrp?

Need advice
ckpv5 said:
Post your fastboot getvar all result without serial & imei no.
You may need a different firmware if it's AT&T & S-On and also don't use that outdated 2.7 TWRP.
Click to expand...
Click to collapse
This my phone info
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.21331147A1.14G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.34.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B67000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 260ae94e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
Which RUU can I use ?

vertigo262 said:
ok, so
I upgraded to 3.11.1700.5 firmware I found. and that was successful.
Then I upgraded my twrp to twrp-3.0.2-0-m8 and that was successful
I believe both Revolution and Viper use the Aroma installer. Anyone know what is going on with these and a fix to stop it from booting into twrp?
Click to expand...
Click to collapse
Wrong firmware. You installed an old version of GPE firmware.
You can't install Sense ROM like Revolution and Viper on GPE firmware.
I asked you to post fastboot getvar all to help you but it seems that you made it harder now because you installed a wrong firmware. If it is S-Off, then it is easy to fix.

ckpv5 said:
Wrong firmware. You installed an old version of GPE firmware.
You can't install Sense ROM like Revolution and Viper on GPE firmware.
I asked you to post fastboot getvar all to help you but it seems that you made it harder now because you installed a wrong firmware. If it is S-Off, then it is easy to fix.
Click to expand...
Click to collapse
sorry, I must have missed your response. was in phone hell world!
here it is.
this is what it was
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.21331931.LA11G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c3d94491
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
this is now
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.213311491.A04G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.11.1700.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c88f4560
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

vertigo262 said:
sorry, I must have missed your response. was in phone hell world!
here it is.
this is what it was
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.21331931.LA11G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c3d94491
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
this is now
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.213311491.A04G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.11.1700.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c88f4560
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
First - remove all serial & imei no. from your above post.
As I said, it is not easy to fix this with S-On device. What you can try is to install the latest AT&T 6.20.502.5 firmware first then run 6.20.502.5 RUU
Read this for the firmware and how-to : http://forum.xda-developers.com/showpost.php?p=66886759&postcount=23
You can get the RUU here : http://www.htc.com/us/support/htc-one-m8-att/news/

ckpv5 said:
First - remove all serial & imei no. from your above post.
As I said, it is not easy to fix this with S-On device. What you can try is to install the latest AT&T 6.20.502.5 firmware first then run 6.20.502.5 RUU
Read this for the firmware and how-to : http://forum.xda-developers.com/showpost.php?p=66886759&postcount=23
You can get the RUU here : http://www.htc.com/us/support/htc-one-m8-att/news/
Click to expand...
Click to collapse
so your saying, install the ruu, update the firmware, then re install viper?
Can't I just update the firmware like I did before? It was S-On before I updated the firmware

The ruu won't install. it says needs more then 30% battery, yet it is fully charged

vertigo262 said:
so your saying, install the ruu, update the firmware, then re install viper?
Click to expand...
Click to collapse
No .. I don't say that ... read again ...
Flash firmware.zip first then RUU ...
or install ROM first, don't reboot the system, but reboot to bootloader, relock bootloader then flash firmware.zip
As you already flashed a wrong firmware, as I said this may work and may not work but the only way that you can try to fix the wrong firmware installed.
---------- Post added at 02:49 PM ---------- Previous post was at 02:49 PM ----------
vertigo262 said:
The ruu won't install. it says needs more then 30% battery, yet it is fully charged
Click to expand...
Click to collapse
Because you have wrong firmware installed.

but with what firmware.zip? I never got the right firmware.zip to begin with so I don't have any firmware files to update with

vertigo262 said:
but with what firmware.zip? I never got the right firmware.zip to begin with so I don't have any firmware files to update with
Click to expand...
Click to collapse
That show you don't read all the posts that I posted .. the firmware.zip is posted in the post that earlier posted
You have to wait for someone else I guess who can write a post that you can understand .. maybe my English is not good enough ... good luck
ckpv5 said:
First - remove all serial & imei no. from your above post.
As I said, it is not easy to fix this with S-On device. What you can try is to install the latest AT&T 6.20.502.5 firmware first then run 6.20.502.5 RUU
Read this for the firmware and how-to : http://forum.xda-developers.com/showpost.php?p=66886759&postcount=23
You can get the RUU here : http://www.htc.com/us/support/htc-one-m8-att/news/
Click to expand...
Click to collapse

ok .. now that I understand what you are saying. because you had the RUU .exe and also were explaining how to update the firmware at the same time while the firmware was burried a couple of levels of posts, I didn't understand what you were saying.
so it looks like the firmware updated successfully
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.20.502.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I unlocked the firmware through the htc website with the Unlock_code.bin
because fastbook oem unlock didn't work.
had to reinstall twrp and that worked after reinstall. although lots of mounting file system errors. with /Data I don't know if that's normal.
seems to be fixed after formatting
Now I will try installing a rom

vertigo262 said:
had to reinstall twrp and that worked after reinstall. although lots of mounting file system errors. with /Data I don't know if that's normal.
seems to be fixed after formatting
Now I will try installing a rom
Click to expand...
Click to collapse
Now you got it.
And yes, after changing from GPE to Sense GSM (AT&T) firmware, you need to reinstall TWRP (the latest 3.0.2-0) and you MUST format data partition, in TWRP - select WIPE, Format Data - yes ... because GPE & Sense data partition is of different size.

Please where can i get compatible firmware for my htc one m8s with S.O 1.12.1405.6 . I have been on this over 3 weeks now but all no avail.

Need Lollipop RUU

Hi! Can anyone help me to get the Lollipop RUU for HTC One M8, please? Thanks in advance!

Try here:
http://androidruu.com/?developer=M8

ssmunif said:
Hi! Can anyone help me to get the Lollipop RUU for HTC One M8, please? Thanks in advance!
Click to expand...
Click to collapse
If you give more info on which M8 version you own, we can help you determine which RUU. The RUU needs to match your CID and MID.

redpoint73 said:
If you give more info on which M8 version you own, we can help you determine which RUU. The RUU needs to match your CID and MID.
Click to expand...
Click to collapse
Here's my Getvar all-
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.19.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH4CCWM03367
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: :silly:
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 5e4b24e4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.153s

Any specific reason you want LP? MM is the current, and has been since Dec 2015.
MM RUU for your version M8 is here (its a zip format RUU, so follow the instructions in the post): http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
Also, be sure to delete the IMEI and serial number from your previous post. These are personal info that should never be posted online.

redpoint73 said:
Any specific reason you want LP? MM is the current, and has been since Dec 2015.
MM RUU for your version M8 is here (its a zip format RUU, so follow the instructions in the post): http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
Also, be sure to delete the IMEI and serial number from your previous post. These are personal info that should never be posted online.
Click to expand...
Click to collapse
The getvar all which I posted is an older version. I have the latest RUU installed, with MM and latest bootloader. The thing is that, I am feeling like the charge is finishing faster while playing games. Moreover, I have another problem. I don't get cellular connectivity. The sim works fine on other phones. The sim is also detected by M8, but no signal. It worked before. I tried every fix on the internet (as far as I could find by searching Google). Can you please help me with that? I don't really want to change to lollipop btw. Please, could you solve the problem? Please?

ssmunif said:
I have the latest RUU installed, with MM and latest bootloader.
Click to expand...
Click to collapse
You can't downgrade (such as MM to LP) by RUU with s-on.
ssmunif said:
The getvar all which I posted is an older version.
Moreover, I have another problem. I don't get cellular connectivity.
Click to expand...
Click to collapse
Post a current getvar all, and then let's see what we can do.

redpoint73 said:
You can't downgrade (such as MM to LP) by RUU with s-on.
Post a current getvar all, and then let's see what we can do.
Click to expand...
Click to collapse
Here's my getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH4CCWM03367
(bootloader) imei: xxxxxxxxxxxxxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.083s
Please help me solve the cellular connectivity problem! Please! I am desperate...

ssmunif said:
Please help me solve the cellular connectivity problem!
Click to expand...
Click to collapse
Did it work when you were on KitKat?

redpoint73 said:
Did it work when you were on KitKat?
Click to expand...
Click to collapse
Yes

setup ruu

I want to install ruu please help
I can not enter the fastboot screen
4 there's an exclamation gray HTC corner post
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA43TSF01897
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 99000429463117
(bootloader) product: m8_wlv
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU (Hboot PreUpdate)
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.016s

nfsworldd said:
I want to install ruu please help
I can not enter the fastboot screen
4 there's an exclamation gray HTC corner post
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA43TSF01897
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 99000429463117
(bootloader) product: m8_wlv
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU (Hboot PreUpdate)
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.016s
Click to expand...
Click to collapse
m8_wlv is Verizon device
version main & mid is WWE device not Verizon
i believe you need to change your mid and flash stock firmware for your device then flash the RUU which meant for your device
Sent from my HTC One M8 using XDA Labs

ahmed.ismael said:
m8_wlv is Verizon device
version main & mid is WWE device not Verizon
i believe you need to change your mid and flash stock firmware for your device then flash the RUU which meant for your device
Sent from my HTC One M8 using XDA Labs
Click to expand...
Click to collapse
Actually, the MID shouldn't matter.
With SuperCID, the MID check is bypassed. It's worked that way with the M7, M8, and M9. With the HTC 10 though, MID must be changed as SuperCID doesn't bypass the check.
Flashing the latest Verizon firmware should be enough. The RUU would only be necessary to run a stock ROM. If a custom ROM is going to be installed, the firmware flash will be enough.
He/she should make sure to flash a full stock firmware and not a "no wipe" version though, since the boot.img (stock kernel) will be removed on a no-wipe firmware package.

@xunholyx
thanks for make it clarity
but is there any thing else should be worried about after flashing WWE firmware over Verizon firmware
and i think he need the stock RUU

ahmed.ismael said:
@xunholyx
thanks for make it clarity
but is there any thing else should be worried about after flashing WWE firmware over Verizon firmware
and i think he need the stock RUU
Click to expand...
Click to collapse
Well, flashing GSM firmware onto a CDMA device is NEVER recommended, so I do understand your thoughts here. And I do agree that running a RUU would be the best and cleanest way to convert back. Changing the MID back to Verizon's should not be necessary, but truthfully there is no reason not to. The OP should stick to Verizon firmware only, so the MID being changed back to 0P6B20000 would probably be a good idea. :highfive:

xunholyx said:
Well, flashing GSM firmware onto a CDMA device is NEVER recommended, so I do understand your thoughts here. And I do agree that running a RUU would be the best and cleanest way to convert back. Changing the MID back to Verizon's should not be necessary, but truthfully there is no reason not to. The OP should stick to Verizon firmware only, so the MID being changed back to 0P6B20000 would probably be a good idea. :highfive:
Click to expand...
Click to collapse
yes that's my thoughts indeed
thanks again

thank you for your help. I gave the phone to telephone repairman

nfsworldd said:
thank you for your help. I gave the phone to telephone repairman
Click to expand...
Click to collapse
Well, I hope they know what they are doing. Because the phone was all kinds of messes up, and not every repair person would know how to fix it (if its even fixable). Someone at some point (if not you, then a former owner) tried to flash the unbranded Euro firmware to this Verizon device. The result is usually a radio brick, and the damage may be permanent.
Most that person can do, is flash the Verizon firmware and RUU (as others have stated) and hope it works properly after that. Unless they are going to replace the whole mainboard.

Sprint M8 imei, baseband unknown

I bought a sprint m8. M8_whl unlocked and s-off. I flashed different RUUs, ROMs etc. Phone works normally but cant find SIM card. It always shows Imei unknown baseband unknown PRL unknown. I live in Turkey. How can i solve my problem?
This is getvar all
bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.1112
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.20.651.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxxxxxxxx
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: xxxxxxxx
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

You have to flash the firmware first prior installing any rom.

@degerli43
remove seialno and meid from OP
try to flash the stock RUU from HTC website here
http://www.htc.com/us/support/htc-one-m8-sprint/news/
a direct link to the RUU
http://dl3.htc.com/application/RUU_...1.3.exe?_ga=1.193310766.2098465900.1482652286

ahmed.ismael said:
@degerli43
remove seialno and meid from OP
try to flash the stock RUU from HTC website here
http://www.htc.com/us/support/htc-one-m8-sprint/news/
a direct link to the RUU
http://dl3.htc.com/application/RUU_...1.3.exe?_ga=1.193310766.2098465900.1482652286
Click to expand...
Click to collapse
thanks for warning me. i tried RUU's but it didnt help me. I am now trying with badboyz rom with flashed correct firmware. hope it helps.

It didnt work again. Please help me.

degerli43 said:
It didnt work again. Please help me.
Click to expand...
Click to collapse
what firmware version you have flashed ??
sprint device is a sensitive device flashing the wrong firmware maybe result in a permanent radio brick ( i hope that's not the case )

ahmed.ismael said:
what firmware version you have flashed ??
sprint device is a sensitive device flashing the wrong firmware maybe result in a permanent radio brick ( i hope that's not the case )
Click to expand...
Click to collapse
I flashed 6.20.651.3 fw. Is it wrong?

degerli43 said:
I flashed 6.20.651.3 fw. Is it wrong?
Click to expand...
Click to collapse
It's the correct firmware
Your issue might be the network itself,as there is some users have the same problem ( using sprint device on gsm network and the imei is unknown )
Try with an older RUU like kitkat and see how it goes
Sent from my HTC M8 using XDA Labs

Reverting to Stock Sense, S-ON (never OFF), which RUU?

Hey Everyone,
I'm trying to revert my M8 to stock sense. I've never S-ON'd, though my phone is all kinds of messed up.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.11G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B13000
(bootloader) cidnum: GLOBA001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.008s
Click to expand...
Click to collapse
I bought my phone from a Canadian provider known as Wind Mobile (now rebranded as Freedom Mobile). As you can see there's no firmware listed, and the bootloader is a strange 3.19.0.0000 which I can't seem to find anything on. The lack of firmware listing seems to be a common problem, but it leaves me with a few blanks that leave me unsure on how to proceed.
I've found threads that have RUUs for the same CID & MID, but never for the same bootloader version. I'm not really too sure how to proceed from here as I can't seem to find stock files anywhere for my provider. I'm currently using CRDroid 7.1.1.
I'd like to go back to as stock as possible and receive OTA updates. Can anyone give me some advice on what to use? I've been searching for a few hours now and can't seem to find anything for my specific phone. The one thing I did find was a European based RUU which would probably screw up my radios as I'm located in Canada.
Thank you.

Go to my backup thread linked in my signature and restore stock 6.13.1500.7 backup.
If you want the firmware to be shown on bootloader then flash fw_6.13.1500.7 firmware
How-to is explained there.
First thing .. use correct TWRP version 3.0.x not your current one which I believe is 2.7.x

ckpv5 said:
Go to my backup thread linked in my signature and restore stock 6.13.1500.7 backup.
If you want the firmware to be shown on bootloader then flash fw_6.13.1500.7 firmware
How-to is explained there.
First thing .. use correct TWRP version 3.0.x not your current one which I believe is 2.7.x
Click to expand...
Click to collapse
Thank you so much. You're the best. Got my phone running at pure stock with no issues whatsoever.