I have an htc one m8 ATT phone I want to install the ViperOneM8 5.02 rom on which says I need to update the firmware to a marshmellow firmware I think.
Or the latest.
While I have found some documentation how to do this on the net, I am not sure where I obtain these files.
The firmware.zip I believe it is
Help on this would be appreciated
Right now I am using hboot 3.16 and twrp 2.7
I found this link
http://android-revolution-hd.blogspot.com/p/android-revolution-hd-mirror-site-var.html
https://www.androidfilehost.com/?w=files&flid=32780
and grabbed the 4.16.1540.8.zip but want to make sure I am grabbing the correct and latest version. Because I don't want to brick my phone
Post your fastboot getvar all result without serial & imei no.
You may need a different firmware if it's AT&T & S-On and also don't use that outdated 2.7 TWRP.
ckpv5 said:
Post your fastboot getvar all result without serial & imei no.
You may need a different firmware if it's AT&T & S-On and also don't use that outdated 2.7 TWRP.
Click to expand...
Click to collapse
For some devices, TWRP 2.7 is recommended due to how older boot loaders may not take it well.
I like TWRP. When its workable, its array of tools is superior to CWM. But after I tried 2.8.x, I decided CWM or TWRP at or below 2.7.0.2 is safer and less crash prone.
When I attempted to boot to recovery it would boot loop. Please be mindful of boot signing. If you so slightly make your OEM software notice things a fuse will make your phone implode.
Sent from my HTC M8 GPE
? Mass Transit Honchkrow ?
furboom1240 said:
For some devices, TWRP 2.7 is recommended due to how older boot loaders may not take it well.
Click to expand...
Click to collapse
Read again what he is trying to do man ... he's going to update to Marshmallow firmware and that outdated TWRP 2.7 won't work for him (he can't even install his intended ViperOneM8 5.02 ROM with that outdated TWRP)
..... that's why I said don't use that outdated TWRP
ckpv5 said:
Read again what he is trying to do man ... he's going to update to Marshmallow firmware and that outdated TWRP 2.7 won't work for him (he can't even install his intended ViperOneM8 5.02 ROM with that outdated TWRP)
..... that's why I said don't use that outdated TWRP
Click to expand...
Click to collapse
Good point. For some odd reason CM pairs ROMs and Recoveries. If you check the Dev Auto update option would that be unnecessary.
It's been an itching question I actually had...
Sent from my HTC M8 GPE
? Mass Transit Honchkrow ?
I originally had twrp 2.8 on and tried to install the latest. But it was freezing because I think I need a newer version of hboot. which I have 3.16 on it.
I then downgraded to 2.7 to get it working. I installed ViperOnem8 Rom not reading the website successfully. but have issues with wifi, and 2 minute boot times.
"The 5.0.x ROM is based on HTC’s latest M8 Sense 7 Android 6.0.x base and requires you to update your firmware to at least the 6.0.x (Marshmallow) version! If you don’t you will run into some issues such as Wi-Fi not working or No Boot, etc.
We cannot install the firmware for you during ROM installation so you will need to take the steps to update the firmware on your own."
So I need to update my firmware. I have an ATT S-ON phone. But I have no clue where to get the firmware from, and make sure it is the right one and recent.
I need to update my firmware in order for this rom and a newer version of twrp to work correctly
ok, so
I upgraded to 3.11.1700.5 firmware I found. and that was successful.
Then I upgraded my twrp to twrp-3.0.2-0-m8 and that was successful
Now I am trying to install either Revolution Rom, or ViperOnem8 and both have the same problem. After install they keep booting into twrp and won't load.
I tried Cynamod and that installed and booted fine.
I believe both Revolution and Viper use the Aroma installer. Anyone know what is going on with these and a fix to stop it from booting into twrp?
Need advice
ckpv5 said:
Post your fastboot getvar all result without serial & imei no.
You may need a different firmware if it's AT&T & S-On and also don't use that outdated 2.7 TWRP.
Click to expand...
Click to collapse
This my phone info
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.21331147A1.14G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.34.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B67000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 260ae94e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
Which RUU can I use ?
vertigo262 said:
ok, so
I upgraded to 3.11.1700.5 firmware I found. and that was successful.
Then I upgraded my twrp to twrp-3.0.2-0-m8 and that was successful
I believe both Revolution and Viper use the Aroma installer. Anyone know what is going on with these and a fix to stop it from booting into twrp?
Click to expand...
Click to collapse
Wrong firmware. You installed an old version of GPE firmware.
You can't install Sense ROM like Revolution and Viper on GPE firmware.
I asked you to post fastboot getvar all to help you but it seems that you made it harder now because you installed a wrong firmware. If it is S-Off, then it is easy to fix.
ckpv5 said:
Wrong firmware. You installed an old version of GPE firmware.
You can't install Sense ROM like Revolution and Viper on GPE firmware.
I asked you to post fastboot getvar all to help you but it seems that you made it harder now because you installed a wrong firmware. If it is S-Off, then it is easy to fix.
Click to expand...
Click to collapse
sorry, I must have missed your response. was in phone hell world!
here it is.
this is what it was
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.21331931.LA11G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c3d94491
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
this is now
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.213311491.A04G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.11.1700.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c88f4560
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
vertigo262 said:
sorry, I must have missed your response. was in phone hell world!
here it is.
this is what it was
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.21331931.LA11G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c3d94491
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
this is now
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.213311491.A04G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.11.1700.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c88f4560
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
First - remove all serial & imei no. from your above post.
As I said, it is not easy to fix this with S-On device. What you can try is to install the latest AT&T 6.20.502.5 firmware first then run 6.20.502.5 RUU
Read this for the firmware and how-to : http://forum.xda-developers.com/showpost.php?p=66886759&postcount=23
You can get the RUU here : http://www.htc.com/us/support/htc-one-m8-att/news/
ckpv5 said:
First - remove all serial & imei no. from your above post.
As I said, it is not easy to fix this with S-On device. What you can try is to install the latest AT&T 6.20.502.5 firmware first then run 6.20.502.5 RUU
Read this for the firmware and how-to : http://forum.xda-developers.com/showpost.php?p=66886759&postcount=23
You can get the RUU here : http://www.htc.com/us/support/htc-one-m8-att/news/
Click to expand...
Click to collapse
so your saying, install the ruu, update the firmware, then re install viper?
Can't I just update the firmware like I did before? It was S-On before I updated the firmware
The ruu won't install. it says needs more then 30% battery, yet it is fully charged
vertigo262 said:
so your saying, install the ruu, update the firmware, then re install viper?
Click to expand...
Click to collapse
No .. I don't say that ... read again ...
Flash firmware.zip first then RUU ...
or install ROM first, don't reboot the system, but reboot to bootloader, relock bootloader then flash firmware.zip
As you already flashed a wrong firmware, as I said this may work and may not work but the only way that you can try to fix the wrong firmware installed.
---------- Post added at 02:49 PM ---------- Previous post was at 02:49 PM ----------
vertigo262 said:
The ruu won't install. it says needs more then 30% battery, yet it is fully charged
Click to expand...
Click to collapse
Because you have wrong firmware installed.
but with what firmware.zip? I never got the right firmware.zip to begin with so I don't have any firmware files to update with
vertigo262 said:
but with what firmware.zip? I never got the right firmware.zip to begin with so I don't have any firmware files to update with
Click to expand...
Click to collapse
That show you don't read all the posts that I posted .. the firmware.zip is posted in the post that earlier posted
You have to wait for someone else I guess who can write a post that you can understand .. maybe my English is not good enough ... good luck
ckpv5 said:
First - remove all serial & imei no. from your above post.
As I said, it is not easy to fix this with S-On device. What you can try is to install the latest AT&T 6.20.502.5 firmware first then run 6.20.502.5 RUU
Read this for the firmware and how-to : http://forum.xda-developers.com/showpost.php?p=66886759&postcount=23
You can get the RUU here : http://www.htc.com/us/support/htc-one-m8-att/news/
Click to expand...
Click to collapse
ok .. now that I understand what you are saying. because you had the RUU .exe and also were explaining how to update the firmware at the same time while the firmware was burried a couple of levels of posts, I didn't understand what you were saying.
so it looks like the firmware updated successfully
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.20.502.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I unlocked the firmware through the htc website with the Unlock_code.bin
because fastbook oem unlock didn't work.
had to reinstall twrp and that worked after reinstall. although lots of mounting file system errors. with /Data I don't know if that's normal.
seems to be fixed after formatting
Now I will try installing a rom
vertigo262 said:
had to reinstall twrp and that worked after reinstall. although lots of mounting file system errors. with /Data I don't know if that's normal.
seems to be fixed after formatting
Now I will try installing a rom
Click to expand...
Click to collapse
Now you got it.
And yes, after changing from GPE to Sense GSM (AT&T) firmware, you need to reinstall TWRP (the latest 3.0.2-0) and you MUST format data partition, in TWRP - select WIPE, Format Data - yes ... because GPE & Sense data partition is of different size.
Please where can i get compatible firmware for my htc one m8s with S.O 1.12.1405.6 . I have been on this over 3 weeks now but all no avail.
Related
Hey XDA,
I have a bit of a problem! I was trying to S-OFF my Tmobile m8 phone (ViperOne 2.5.0) so that I could upgrade to the latest and greatest. I installed Sunshine and was told my ROM wasn't compatible.
I followed the instructions here: http://www.android.gs/downgrade-t-mobile-htc-one-m8-to-official-stock-firmware-with-ruu/ to get back to stock so I could S-OFF.
Basically, relock the bootloader (done, successfully - shows Relocked) and ran the RUU utility. The RUU utility says that it's not the right version - I downloaded RUU_M8_TMOUS_1.57.531.7.exe. Now, my phone is stuck in fastboot/hboot and when I try to reboot, goes right back into fastboot. I have no idea what to do from here. I can't get into recovery to restore an image. I can't "fastboot oem unlock" to see if that helps - it fails.
Any ideas?
spinez said:
Hey XDA,
I have a bit of a problem! I was trying to S-OFF my Tmobile m8 phone (ViperOne 2.5.0) so that I could upgrade to the latest and greatest. I installed Sunshine and was told my ROM wasn't compatible.
I followed the instructions here: http://www.android.gs/downgrade-t-mobile-htc-one-m8-to-official-stock-firmware-with-ruu/ to get back to stock so I could S-OFF.
Basically, relock the bootloader (done, successfully - shows Relocked) and ran the RUU utility. The RUU utility says that it's not the right version - I downloaded RUU_M8_TMOUS_1.57.531.7.exe. Now, my phone is stuck in fastboot/hboot and when I try to reboot, goes right back into fastboot. I have no idea what to do from here. I can't get into recovery to restore an image. I can't "fastboot oem unlock" to see if that helps - it fails.
Any ideas?
Click to expand...
Click to collapse
Your issue is that you are trying to run an RUU for an older version (4.4.2), or that you are not on T-Mo US, but on an International/European version.
If you are in the US, run this RUU instead. It will jump you up to Lollipop 5.0, and should also fix your issue.
The above link is to HTC's US website, and is the official 4.20.531.4 RUU. You will want to scroll down to the manual system update instructions. The download is at the bottom of the page.
Good luck!
xunholyx said:
Your issue is that you are trying to run an RUU for an older version (4.4.2), or that you are not on T-Mo US, but on an International/European version.
If you are in the US, run this RUU instead. It will jump you up to Lollipop 5.0, and should also fix your issue.
The above link is to HTC's US website, and is the official 4.20.531.4 RUU. You will want to scroll down to the manual system update instructions. The download is at the bottom of the page.
Good luck!
Click to expand...
Click to collapse
Thanks for the info, definitely a TMO US phone. I'm downloading now (30 mins remaining). Here's more info if this doesn't work out.
C:\Windows\system32>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.19.213311491.03G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B13000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 5e4b24e4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
spinez said:
Thanks for the info, definitely a TMO US phone. I'm downloading now (30 mins remaining). Here's more info if this doesn't work out.
C:\Windows\system32>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.19.213311491.03G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B13000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 5e4b24e4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
Click to expand...
Click to collapse
Yep. That was the problem. I can tell from your bootloader version that you are on 4.4.3 firmware. You can only downgrade if you are s-off.
If you want to get S-Off, after running the RUU would be a good time to do it. It works best when on the stock ROM, but will also work with a near stock ROM such as MaximusHD.
---------- Post added at 03:32 PM ---------- Previous post was at 03:30 PM ----------
Also, delete your serial# and IMEI from your readout. That is private information, and you should never post those on a public forum for your own security.
Hi guys, I want to try this rom but to do that i have to update my firmware to 6.12.1540.4 version. I'm actually using Viper but the thing is that i'm S-ON and i don't want to buy Sunshine to get S-OFF (unless is necessary). There are other ways to do that? Thanks for the answers and sorry for my english
In case you need these:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.401.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__405
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Gerico0889 said:
Hi guys, I want to try this rom but to do that i have to update my firmware to 6.12.1540.4 version.
Click to expand...
Click to collapse
No you don't.
6.12.1540.4 based ROMs should work just fine with Lollipop firmware, which you have. Just go ahead and flash the ROM.
To answer the question: can you flash 6.12.1540.4 firmware with s-on, the answer is NO. And you can't flash any other MM firmware with s-on until the update is released for your CID.
Also, you should delete your IMEI and serial numbers from your getvar output. These are personal information, that should't be posted online.
redpoint73 said:
No you don't.
6.12.1540.4 based ROMs should work just fine with Lollipop firmware, which you have. Just go ahead and flash the ROM.
To answer the question: can you flash 6.12.1540.4 firmware with s-on, the answer is NO. And you can't flash any other MM firmware with s-on until the update is released for your CID.
Also, you should delete your IMEI and serial numbers from your getvar output. These are personal information, that should't be posted online.
Click to expand...
Click to collapse
Thanks for the infos, i'll delete the imei and serial number and i'll go flash the rom. Thank you again
Hi guys. I need Ruu*.exe file for my m8. I have rooted, unlocked and tempered m8. I must go bak to official. Now the lastest official software is running but this is a rom. Not the official software installed on My Phone. Anybody can help me about this?
ps: Sorry for My badly english
Every region/carrier version has a different RUU. The RUU needs to match your CID and MID.
Do you know your CID? Current version number?
Best way to get the required info (and for us to help), is do fastboot getvar all, and post the output (delete IMEI and serial number before posting).
I dont know cid number but i am from Turkey and must be Turkey rom
I'm gonna share my information about my phone... I need 2-3 minutes
yusuf_ said:
I dont know cid number but i am from Turkey and must be Turkey rom
Click to expand...
Click to collapse
No, that is not a good assumption and not helpful.
---------- Post added at 01:25 PM ---------- Previous post was at 01:25 PM ----------
yusuf_ said:
I'm gonna share my information about my phone... I need 2-3 minutes
Click to expand...
Click to collapse
Please do.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ****************
(bootloader) imei: ***************
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__M27
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
thank you so much for your help
By the way. I know everything about the installing the any roms. just i need the ruu.exe file for the lastest ofiicial android 6.0 mm firmware for the m8. becouse os is 6.12.401.4 and i need this or higher (I know there is not ).
yusuf_ said:
By the way. I know everything about the installing the any roms. just i need the ruu.exe file for the lastest ofiicial android 6.0 mm firmware for the m8. becouse os is 6.12.401.4 and i need this or higher (I know there is not ).
Click to expand...
Click to collapse
Did you know all this to begin with, or did you just figure it out?
RUU is here: http://forum.xda-developers.com/showpost.php?p=64869713&postcount=3
Can't personally vouch for it, but others seem to be using it successfully.
redpoint73 said:
Did you know all this to begin with, or did you just figure it out?
RUU is here: http://forum.xda-developers.com/showpost.php?p=64869713&postcount=3
Can't personally vouch for it, but others seem to be using it successfully.
Click to expand...
Click to collapse
No really I need to file only . Thank you for sharing files and find the file
Hey sorry. Because i forget to say. my phone is s-on. how can i flash this file?
yusuf_ said:
Hey sorry. Because i forget to say. my phone is s-on. how can i flash this file?
Click to expand...
Click to collapse
Relock the bootloader with command: fastboot oem lock
Then connect to PC, reboot phone into bootloader-fastboot mode, and just run the RUU executable from the PC.
Hi, can I have the latest available RUU as well for my device? Currently the device is having issues where it couldn't detect the SIM and WiFi/Bluetooth all not working at all, IMEI also not shown in the OS.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.24_2G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.14.707.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ***********
(bootloader) imei: ***********
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B11000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Thanks alot!
Hi, I recently rooted my phone in hopes of updating to Android Marshmallow, however I can't seem to find the right ROM for it. Can someone please help? I'm fairly new to this, so I apologize in advance if there's something I forgot. Thanks in advance!
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.08.20.0612_4
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid:
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 631e3609
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
You need this RUU form HTC's website. Scroll down to Manual Update Instructions and read them. The download is at the end of the instuctions.
I downloaded the RUU and followed the instructions but Error 155 popped up and said to get the correct ROM Update Utility.
Entyar said:
I downloaded the RUU and followed the instructions but Error 155 popped up and said to get the correct ROM Update Utility.
Click to expand...
Click to collapse
remove meid from first post
flash the firmware first
after successful firmware flashing run the RUU again
for more info read this thread
https://forum.xda-developers.com/showthread.php?t=2729173
Oh, I didn't know you had to update the firmware first. Anyway, after flashing it and getting a bootloop, I managed to update to Marshmallow after installing the RUU through Hboot. Thanks for all the help, appreciate it!
Entyar said:
Oh, I didn't know you had to update the firmware first.
Click to expand...
Click to collapse
That's an honest mistake; and quite understandable. Its a esoteric piece of information, and you would only know it from experience (reading it here). The requirement to flash firmware before RUU only applies to the Marshmallow RUUs (and while upgrading from LP, KK), and only for US variants. No idea why HTC did this.
I did post a week or so ago about installing an RUU and the S-off status of my phone. I've since unlocked the bootloader using HTC-Dev, and have flashed TWRP with the aim of installing a custom ROM. TWRP flashed fine but won't load. I really have no idea what I can do from here. I've tried flashing earlier versions but they still won't load. My getvar all info - minus the IMEI - is:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.15.2133156.UA12.5mv
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.54.401.109
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: MB524WM06330
(bootloader) imei: --------------
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I honestly don't know where to go from here so any help would be much appreciated!
It seems you have a pre-production unit.
Try to update it to current firmware level - https://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
Then install latest TWRP, then install any custom rom that you like.
Thanks for the info! I followed the steps but the RUU 0P6BIMG_M8_UL_M60_SENSE70_MR_HTC_Europe_6.12.401.4_Radio_1.29.214500021.12G_20.72.4196t.01_release_464360_signed.zip
wouldn’t flash. I then tried flashing a firmware.zip 6.12.401.4 from this link:
https://docs.google.com/spreadsheets/d/1aNd_nm4Em1wamRLFT7qHM2c3O9_sg_H3ztBrGq1u9Ws/pubhtml
zipped with TWRP which was successful and enabled me to flash the latest TWRP v 3.2.3.0, but I wasn’t able to flash Lineage 14.1 with the error “Failed to mount ‘/carrier’ (invalid argument).
Is this a partition issue? Or something else maybe?
I actually installed an S-team marshmallow ROM which flashed fine. I was then able to wipe and flash Lineage 14.1 Nougat. Not sure why, but maybe too big a gap between kit kat & nougat, bridged by marshmallow. Very un-technical I know, I'm sure there's a reason why.
Swell6 said:
I followed the steps but the RUU 0P6BIMG_M8_UL_M60_SENSE70_MR_HTC_Europe_6.12.401.4_Radio_1.29.214500021.12G_20.72.4196t.01_release_464360_signed.zip
wouldn’t flash. I then tried flashing a firmware.zip 6.12.401.4 from this link:
Click to expand...
Click to collapse
Probably would have made sense to try the RUU again, after flashing the firmware. Hard to say, since you didn't give details on how the RUU failed.