Develop Bugs

I Need Lastest Android 6.0 RUU

Hi guys. I need Ruu*.exe file for my m8. I have rooted, unlocked and tempered m8. I must go bak to official. Now the lastest official software is running but this is a rom. Not the official software installed on My Phone. Anybody can help me about this?
ps: Sorry for My badly english

Every region/carrier version has a different RUU. The RUU needs to match your CID and MID.
Do you know your CID? Current version number?
Best way to get the required info (and for us to help), is do fastboot getvar all, and post the output (delete IMEI and serial number before posting).

I dont know cid number but i am from Turkey and must be Turkey rom

I'm gonna share my information about my phone... I need 2-3 minutes

yusuf_ said:
I dont know cid number but i am from Turkey and must be Turkey rom
Click to expand...
Click to collapse
No, that is not a good assumption and not helpful.
---------- Post added at 01:25 PM ---------- Previous post was at 01:25 PM ----------
yusuf_ said:
I'm gonna share my information about my phone... I need 2-3 minutes
Click to expand...
Click to collapse
Please do.

(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ****************
(bootloader) imei: ***************
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__M27
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

thank you so much for your help

By the way. I know everything about the installing the any roms. just i need the ruu.exe file for the lastest ofiicial android 6.0 mm firmware for the m8. becouse os is 6.12.401.4 and i need this or higher (I know there is not ).

yusuf_ said:
By the way. I know everything about the installing the any roms. just i need the ruu.exe file for the lastest ofiicial android 6.0 mm firmware for the m8. becouse os is 6.12.401.4 and i need this or higher (I know there is not ).
Click to expand...
Click to collapse
Did you know all this to begin with, or did you just figure it out?
RUU is here: http://forum.xda-developers.com/showpost.php?p=64869713&postcount=3
Can't personally vouch for it, but others seem to be using it successfully.

redpoint73 said:
Did you know all this to begin with, or did you just figure it out?
RUU is here: http://forum.xda-developers.com/showpost.php?p=64869713&postcount=3
Can't personally vouch for it, but others seem to be using it successfully.
Click to expand...
Click to collapse
No really I need to file only . Thank you for sharing files and find the file

Hey sorry. Because i forget to say. my phone is s-on. how can i flash this file?

yusuf_ said:
Hey sorry. Because i forget to say. my phone is s-on. how can i flash this file?
Click to expand...
Click to collapse
Relock the bootloader with command: fastboot oem lock
Then connect to PC, reboot phone into bootloader-fastboot mode, and just run the RUU executable from the PC.

Hi, can I have the latest available RUU as well for my device? Currently the device is having issues where it couldn't detect the SIM and WiFi/Bluetooth all not working at all, IMEI also not shown in the OS.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.24_2G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.14.707.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ***********
(bootloader) imei: ***********
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B11000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Thanks alot!

Where to get latest firmware.zip for htc one m8

I have an htc one m8 ATT phone I want to install the ViperOneM8 5.02 rom on which says I need to update the firmware to a marshmellow firmware I think.
Or the latest.
While I have found some documentation how to do this on the net, I am not sure where I obtain these files.
The firmware.zip I believe it is
Help on this would be appreciated
Right now I am using hboot 3.16 and twrp 2.7

I found this link
http://android-revolution-hd.blogspot.com/p/android-revolution-hd-mirror-site-var.html
https://www.androidfilehost.com/?w=files&flid=32780
and grabbed the 4.16.1540.8.zip but want to make sure I am grabbing the correct and latest version. Because I don't want to brick my phone

Post your fastboot getvar all result without serial & imei no.
You may need a different firmware if it's AT&T & S-On and also don't use that outdated 2.7 TWRP.

ckpv5 said:
Post your fastboot getvar all result without serial & imei no.
You may need a different firmware if it's AT&T & S-On and also don't use that outdated 2.7 TWRP.
Click to expand...
Click to collapse
For some devices, TWRP 2.7 is recommended due to how older boot loaders may not take it well.
I like TWRP. When its workable, its array of tools is superior to CWM. But after I tried 2.8.x, I decided CWM or TWRP at or below 2.7.0.2 is safer and less crash prone.
When I attempted to boot to recovery it would boot loop. Please be mindful of boot signing. If you so slightly make your OEM software notice things a fuse will make your phone implode.
Sent from my HTC M8 GPE
? Mass Transit Honchkrow ?

furboom1240 said:
For some devices, TWRP 2.7 is recommended due to how older boot loaders may not take it well.
Click to expand...
Click to collapse
Read again what he is trying to do man ... he's going to update to Marshmallow firmware and that outdated TWRP 2.7 won't work for him (he can't even install his intended ViperOneM8 5.02 ROM with that outdated TWRP)
..... that's why I said don't use that outdated TWRP

ckpv5 said:
Read again what he is trying to do man ... he's going to update to Marshmallow firmware and that outdated TWRP 2.7 won't work for him (he can't even install his intended ViperOneM8 5.02 ROM with that outdated TWRP)
..... that's why I said don't use that outdated TWRP
Click to expand...
Click to collapse
Good point. For some odd reason CM pairs ROMs and Recoveries. If you check the Dev Auto update option would that be unnecessary.
It's been an itching question I actually had...
Sent from my HTC M8 GPE
? Mass Transit Honchkrow ?

I originally had twrp 2.8 on and tried to install the latest. But it was freezing because I think I need a newer version of hboot. which I have 3.16 on it.
I then downgraded to 2.7 to get it working. I installed ViperOnem8 Rom not reading the website successfully. but have issues with wifi, and 2 minute boot times.
"The 5.0.x ROM is based on HTC’s latest M8 Sense 7 Android 6.0.x base and requires you to update your firmware to at least the 6.0.x (Marshmallow) version! If you don’t you will run into some issues such as Wi-Fi not working or No Boot, etc.
We cannot install the firmware for you during ROM installation so you will need to take the steps to update the firmware on your own."
So I need to update my firmware. I have an ATT S-ON phone. But I have no clue where to get the firmware from, and make sure it is the right one and recent.
I need to update my firmware in order for this rom and a newer version of twrp to work correctly

ok, so
I upgraded to 3.11.1700.5 firmware I found. and that was successful.
Then I upgraded my twrp to twrp-3.0.2-0-m8 and that was successful
Now I am trying to install either Revolution Rom, or ViperOnem8 and both have the same problem. After install they keep booting into twrp and won't load.
I tried Cynamod and that installed and booted fine.
I believe both Revolution and Viper use the Aroma installer. Anyone know what is going on with these and a fix to stop it from booting into twrp?

Need advice
ckpv5 said:
Post your fastboot getvar all result without serial & imei no.
You may need a different firmware if it's AT&T & S-On and also don't use that outdated 2.7 TWRP.
Click to expand...
Click to collapse
This my phone info
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.21331147A1.14G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.34.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B67000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 260ae94e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
Which RUU can I use ?

vertigo262 said:
ok, so
I upgraded to 3.11.1700.5 firmware I found. and that was successful.
Then I upgraded my twrp to twrp-3.0.2-0-m8 and that was successful
I believe both Revolution and Viper use the Aroma installer. Anyone know what is going on with these and a fix to stop it from booting into twrp?
Click to expand...
Click to collapse
Wrong firmware. You installed an old version of GPE firmware.
You can't install Sense ROM like Revolution and Viper on GPE firmware.
I asked you to post fastboot getvar all to help you but it seems that you made it harder now because you installed a wrong firmware. If it is S-Off, then it is easy to fix.

ckpv5 said:
Wrong firmware. You installed an old version of GPE firmware.
You can't install Sense ROM like Revolution and Viper on GPE firmware.
I asked you to post fastboot getvar all to help you but it seems that you made it harder now because you installed a wrong firmware. If it is S-Off, then it is easy to fix.
Click to expand...
Click to collapse
sorry, I must have missed your response. was in phone hell world!
here it is.
this is what it was
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.21331931.LA11G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c3d94491
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
this is now
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.213311491.A04G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.11.1700.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c88f4560
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

vertigo262 said:
sorry, I must have missed your response. was in phone hell world!
here it is.
this is what it was
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.21331931.LA11G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c3d94491
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
this is now
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.213311491.A04G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.11.1700.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c88f4560
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
First - remove all serial & imei no. from your above post.
As I said, it is not easy to fix this with S-On device. What you can try is to install the latest AT&T 6.20.502.5 firmware first then run 6.20.502.5 RUU
Read this for the firmware and how-to : http://forum.xda-developers.com/showpost.php?p=66886759&postcount=23
You can get the RUU here : http://www.htc.com/us/support/htc-one-m8-att/news/

ckpv5 said:
First - remove all serial & imei no. from your above post.
As I said, it is not easy to fix this with S-On device. What you can try is to install the latest AT&T 6.20.502.5 firmware first then run 6.20.502.5 RUU
Read this for the firmware and how-to : http://forum.xda-developers.com/showpost.php?p=66886759&postcount=23
You can get the RUU here : http://www.htc.com/us/support/htc-one-m8-att/news/
Click to expand...
Click to collapse
so your saying, install the ruu, update the firmware, then re install viper?
Can't I just update the firmware like I did before? It was S-On before I updated the firmware

The ruu won't install. it says needs more then 30% battery, yet it is fully charged

vertigo262 said:
so your saying, install the ruu, update the firmware, then re install viper?
Click to expand...
Click to collapse
No .. I don't say that ... read again ...
Flash firmware.zip first then RUU ...
or install ROM first, don't reboot the system, but reboot to bootloader, relock bootloader then flash firmware.zip
As you already flashed a wrong firmware, as I said this may work and may not work but the only way that you can try to fix the wrong firmware installed.
---------- Post added at 02:49 PM ---------- Previous post was at 02:49 PM ----------
vertigo262 said:
The ruu won't install. it says needs more then 30% battery, yet it is fully charged
Click to expand...
Click to collapse
Because you have wrong firmware installed.

but with what firmware.zip? I never got the right firmware.zip to begin with so I don't have any firmware files to update with

vertigo262 said:
but with what firmware.zip? I never got the right firmware.zip to begin with so I don't have any firmware files to update with
Click to expand...
Click to collapse
That show you don't read all the posts that I posted .. the firmware.zip is posted in the post that earlier posted
You have to wait for someone else I guess who can write a post that you can understand .. maybe my English is not good enough ... good luck
ckpv5 said:
First - remove all serial & imei no. from your above post.
As I said, it is not easy to fix this with S-On device. What you can try is to install the latest AT&T 6.20.502.5 firmware first then run 6.20.502.5 RUU
Read this for the firmware and how-to : http://forum.xda-developers.com/showpost.php?p=66886759&postcount=23
You can get the RUU here : http://www.htc.com/us/support/htc-one-m8-att/news/
Click to expand...
Click to collapse

ok .. now that I understand what you are saying. because you had the RUU .exe and also were explaining how to update the firmware at the same time while the firmware was burried a couple of levels of posts, I didn't understand what you were saying.
so it looks like the firmware updated successfully
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.20.502.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I unlocked the firmware through the htc website with the Unlock_code.bin
because fastbook oem unlock didn't work.
had to reinstall twrp and that worked after reinstall. although lots of mounting file system errors. with /Data I don't know if that's normal.
seems to be fixed after formatting
Now I will try installing a rom

vertigo262 said:
had to reinstall twrp and that worked after reinstall. although lots of mounting file system errors. with /Data I don't know if that's normal.
seems to be fixed after formatting
Now I will try installing a rom
Click to expand...
Click to collapse
Now you got it.
And yes, after changing from GPE to Sense GSM (AT&T) firmware, you need to reinstall TWRP (the latest 3.0.2-0) and you MUST format data partition, in TWRP - select WIPE, Format Data - yes ... because GPE & Sense data partition is of different size.

Please where can i get compatible firmware for my htc one m8s with S.O 1.12.1405.6 . I have been on this over 3 weeks now but all no avail.

Having problem updating release keys?

Hi,i've been having update problems last 2 days and im confused.Every time i click restart & install button in update section it brings phone to recovery and starts installing update,but suddenly it requires phone to have root access.Is there any way to fix that without rooting? Because rooting caused me problem last time(infinite bootloop).
Also,im interested if my phone really is GPe.Here is the getvar:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.23.213311491.A13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.07.1700.12
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B13000
(bootloader) cidnum: GOOGL001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 11459804
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Thanks

RaZaR1998 said:
Hi,i've been having update problems last 2 days and im confused.Every time i click restart & install button in update section it brings phone to recovery and starts installing update,but suddenly it requires phone to have root access.Is there any way to fix that without rooting? Because rooting caused me problem last time(infinite bootloop).
Also,im interested if my phone really is GPe.Here is the getvar:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.23.213311491.A13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.07.1700.12
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B13000
(bootloader) cidnum: GOOGL001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 11459804
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Thanks
Click to expand...
Click to collapse
well this getvar result is not right or you have missed some thing
have you convert the device from sense to GPE ?
product : m8_ul is unlocked ( sense based )
GPE product is : m8_ul_ca
version main & cidnum are belong to GPE device
modelid is belong to sense device ( T-Mobile US )
you may need to clean up this mess then update your device
Sent from my HTC One M8 using XDA Labs

ahmed.ismael said:
well this getvar result is not right or you have missed some thing
have you convert the device from sense to GPE ?
product : m8_ul is unlocked ( sense based )
GPE product is : m8_ul_ca
version main & cidnum are belong to GPE device
modelid is belong to sense device ( T-Mobile US )
you may need to clean up this mess then update your device
Click to expand...
Click to collapse
Frankly,that is second hand phone and got no idea what to do.if you can suggest me anything I'm all ears
P.S I don't mean that I'm new with android,just newbie with this phone

RaZaR1998 said:
Frankly,that is second hand phone and got no idea what to do.if you can suggest me anything I'm all ears
Click to expand...
Click to collapse
it depends on your choice ( sense or GPE )
the easier is GPE only need to change the modelid go to this thread to change it ( choose google play mid )
http://forum.xda-developers.com/showthread.php?t=2708581
then do update
or if you need to back to sense you need to go to this thread http://forum.xda-developers.com/showthread.php?t=2733523
and follow the steps but replace the firmware in thread with most recent one from here http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
choose the one that match your modelid
or here it's direct link
https://mega.nz/#!yIhBTRKJ!5rZldUEzCaFqYUhomn4mO_IgA_-nW6-gV9HX5LCzT5Y
after that you will need to flash rom,restore backup or flash RUU from htc here is direct link
http://dl3.htc.com/application/RUU_M8_UL_M60_SENSE70_MR_TMOUS_6.20.531.5.exe
Edit:- it's recommended to back to sense as you can flash GPE based rom on sense firmware but you can't flash sense based rom on GPE firmware it's your choice
Sent from my HTC One M8 using XDA Labs

htc m8 eye unknown imei and baseband

Hi
my phone was on Kitkat and when i uptaded to Lollipop it losts the imei and baseband and does not detect the sim, i had a twrp backup from the kitkat and restore it but it does not be ok, what should i do to repair it?
its info:
version: 0.5
version-bootloader: 3.19.0.0000
version-baseband: 1.29.213311711
version-cpld: None
version-microp: None
version-main: 5.07.401.1
version-misc: PVT SHIP S-ON
serialno:
imei:
imei2: Not Support
meid: 00000000000000
product: mels_tuhl
platform: hTCBmsm8974
modelid: 0P6B81000
cidnum: HTC__J15
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 5c9466dd
hbootpreupdate: 11
gencheckpt: 0
Thanks for helps

hi. guys how r u?
Dear i have a little issue with my htc m8 unknown baseband or imei if someone have the solution so help me
sorry for my bad English
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.24.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.1540.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA44YWM05404
(bootloader) imei: 358718050972467
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s

nibi mirza said:
hi. guys how r u?
Dear i have a little issue with my htc m8 unknown baseband or imei if someone have the solution so help me
sorry for my bad English
(bootloader) version-main: 4.16.1540.8
(bootloader) product: m8_ul_ca
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: 11111111
Click to expand...
Click to collapse
You are lucky I looked at this thread at all. The title subject is specific to "M8 eye" which is technically a different from (different hardware) from what you have (the "standard" M8). I don't personally own the "eye" (just the "regular" M8) so rarely look at or try to help on such threads. But I can see how that difference (eye vs. standard M8) is confusing, especially since English is not your native language.
I suggest you flash the stock RUU. Although the RUU for your current version (4.16.1540.8) does not have a working "official" link anymore (old version, Lollipop) that I can find. You can use the newer (Marshmallow) RUU, which you may want updated version anyway. That RUU link is still working:
http://dl3.htc.com/application/RUU_M8_UL_M60_SENSE70_MR_BrightstarUS_WWE_6.12.1540.4.exe
However, this RUU will have some extra steps, as running the RUU will require you first update to the Marshmallow firmware 6.12.1540.4. You can find the firmware 6.12.1540.4 and instructions to flash on the following post (suggest using fastboot method to flash firmware).
Note that firmware is not the same as the RUU (or ROM). Firmware is just a small zip file that needs to be flashed, before the RUU will work (requirement specific for updating to Marshmallow RUU from a lower version). So you need to flash firmware and flash RUU. And hopefully, this will fix the baseband issue.
Also note, that since you are s-off, no need to lock the bootloader to flash firmware or RUU (even if the instructions say to lock the bootloader).

i cant install update on htc one m8

hi to all .. i have htc one m8 and i root it ..i want to check if the root still ..if yes i want to unroot ..my htc version is lollipop ...plz help me

You need to restore a stock TWRP backup (stock ROM) and stock recovery in order to OTA update. See the following thread for the required files and guide: https://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
Alternately, if there is an RUU for your M8 version, you can use it to update. But not all M8 versions have RUU. Do fastboot getvar all, and post the results (delete IMEI and serial number before posting) if you want further advice.
EDIT: I see from your post history, that you asked this same exact question last year (and again the year before that), and I gave you the proper answer. Not sure why you feel the need to ask the same question over and over, when you've already been provided the correct answer.
If you don't understand the process, or have any specific questions about the process, then ask them. Otherwise, just asking the same question (how to return to stock for update) is just annoying.

iam back plz help
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.24_2G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.20.709.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B11000
(bootloader) cidnum: HTC__621
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

my phone on version 6.0 and i cant update to a newest one

Jnoubileb said:
my phone on version 6.0 and i cant update to a newest one
Click to expand...
Click to collapse
plz help

Jnoubileb said:
my phone on version 6.0 and i cant update to a newest one
Click to expand...
Click to collapse
You are on the latest version. There are no more updates. There haven't been for years now (3-4 years?).