Develop Bugs

[Q] Firmware update

Hi guys, I want to try this rom but to do that i have to update my firmware to 6.12.1540.4 version. I'm actually using Viper but the thing is that i'm S-ON and i don't want to buy Sunshine to get S-OFF (unless is necessary). There are other ways to do that? Thanks for the answers and sorry for my english
In case you need these:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.401.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__405
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!

Gerico0889 said:
Hi guys, I want to try this rom but to do that i have to update my firmware to 6.12.1540.4 version.
Click to expand...
Click to collapse
No you don't.
6.12.1540.4 based ROMs should work just fine with Lollipop firmware, which you have. Just go ahead and flash the ROM.
To answer the question: can you flash 6.12.1540.4 firmware with s-on, the answer is NO. And you can't flash any other MM firmware with s-on until the update is released for your CID.
Also, you should delete your IMEI and serial numbers from your getvar output. These are personal information, that should't be posted online.

redpoint73 said:
No you don't.
6.12.1540.4 based ROMs should work just fine with Lollipop firmware, which you have. Just go ahead and flash the ROM.
To answer the question: can you flash 6.12.1540.4 firmware with s-on, the answer is NO. And you can't flash any other MM firmware with s-on until the update is released for your CID.
Also, you should delete your IMEI and serial numbers from your getvar output. These are personal information, that should't be posted online.
Click to expand...
Click to collapse
Thanks for the infos, i'll delete the imei and serial number and i'll go flash the rom. Thank you again

Where to get latest firmware.zip for htc one m8

I have an htc one m8 ATT phone I want to install the ViperOneM8 5.02 rom on which says I need to update the firmware to a marshmellow firmware I think.
Or the latest.
While I have found some documentation how to do this on the net, I am not sure where I obtain these files.
The firmware.zip I believe it is
Help on this would be appreciated
Right now I am using hboot 3.16 and twrp 2.7

I found this link
http://android-revolution-hd.blogspot.com/p/android-revolution-hd-mirror-site-var.html
https://www.androidfilehost.com/?w=files&flid=32780
and grabbed the 4.16.1540.8.zip but want to make sure I am grabbing the correct and latest version. Because I don't want to brick my phone

Post your fastboot getvar all result without serial & imei no.
You may need a different firmware if it's AT&T & S-On and also don't use that outdated 2.7 TWRP.

ckpv5 said:
Post your fastboot getvar all result without serial & imei no.
You may need a different firmware if it's AT&T & S-On and also don't use that outdated 2.7 TWRP.
Click to expand...
Click to collapse
For some devices, TWRP 2.7 is recommended due to how older boot loaders may not take it well.
I like TWRP. When its workable, its array of tools is superior to CWM. But after I tried 2.8.x, I decided CWM or TWRP at or below 2.7.0.2 is safer and less crash prone.
When I attempted to boot to recovery it would boot loop. Please be mindful of boot signing. If you so slightly make your OEM software notice things a fuse will make your phone implode.
Sent from my HTC M8 GPE
? Mass Transit Honchkrow ?

furboom1240 said:
For some devices, TWRP 2.7 is recommended due to how older boot loaders may not take it well.
Click to expand...
Click to collapse
Read again what he is trying to do man ... he's going to update to Marshmallow firmware and that outdated TWRP 2.7 won't work for him (he can't even install his intended ViperOneM8 5.02 ROM with that outdated TWRP)
..... that's why I said don't use that outdated TWRP

ckpv5 said:
Read again what he is trying to do man ... he's going to update to Marshmallow firmware and that outdated TWRP 2.7 won't work for him (he can't even install his intended ViperOneM8 5.02 ROM with that outdated TWRP)
..... that's why I said don't use that outdated TWRP
Click to expand...
Click to collapse
Good point. For some odd reason CM pairs ROMs and Recoveries. If you check the Dev Auto update option would that be unnecessary.
It's been an itching question I actually had...
Sent from my HTC M8 GPE
? Mass Transit Honchkrow ?

I originally had twrp 2.8 on and tried to install the latest. But it was freezing because I think I need a newer version of hboot. which I have 3.16 on it.
I then downgraded to 2.7 to get it working. I installed ViperOnem8 Rom not reading the website successfully. but have issues with wifi, and 2 minute boot times.
"The 5.0.x ROM is based on HTC’s latest M8 Sense 7 Android 6.0.x base and requires you to update your firmware to at least the 6.0.x (Marshmallow) version! If you don’t you will run into some issues such as Wi-Fi not working or No Boot, etc.
We cannot install the firmware for you during ROM installation so you will need to take the steps to update the firmware on your own."
So I need to update my firmware. I have an ATT S-ON phone. But I have no clue where to get the firmware from, and make sure it is the right one and recent.
I need to update my firmware in order for this rom and a newer version of twrp to work correctly

ok, so
I upgraded to 3.11.1700.5 firmware I found. and that was successful.
Then I upgraded my twrp to twrp-3.0.2-0-m8 and that was successful
Now I am trying to install either Revolution Rom, or ViperOnem8 and both have the same problem. After install they keep booting into twrp and won't load.
I tried Cynamod and that installed and booted fine.
I believe both Revolution and Viper use the Aroma installer. Anyone know what is going on with these and a fix to stop it from booting into twrp?

Need advice
ckpv5 said:
Post your fastboot getvar all result without serial & imei no.
You may need a different firmware if it's AT&T & S-On and also don't use that outdated 2.7 TWRP.
Click to expand...
Click to collapse
This my phone info
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.21331147A1.14G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.34.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B67000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 260ae94e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
Which RUU can I use ?

vertigo262 said:
ok, so
I upgraded to 3.11.1700.5 firmware I found. and that was successful.
Then I upgraded my twrp to twrp-3.0.2-0-m8 and that was successful
I believe both Revolution and Viper use the Aroma installer. Anyone know what is going on with these and a fix to stop it from booting into twrp?
Click to expand...
Click to collapse
Wrong firmware. You installed an old version of GPE firmware.
You can't install Sense ROM like Revolution and Viper on GPE firmware.
I asked you to post fastboot getvar all to help you but it seems that you made it harder now because you installed a wrong firmware. If it is S-Off, then it is easy to fix.

ckpv5 said:
Wrong firmware. You installed an old version of GPE firmware.
You can't install Sense ROM like Revolution and Viper on GPE firmware.
I asked you to post fastboot getvar all to help you but it seems that you made it harder now because you installed a wrong firmware. If it is S-Off, then it is easy to fix.
Click to expand...
Click to collapse
sorry, I must have missed your response. was in phone hell world!
here it is.
this is what it was
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.21331931.LA11G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c3d94491
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
this is now
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.213311491.A04G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.11.1700.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c88f4560
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

vertigo262 said:
sorry, I must have missed your response. was in phone hell world!
here it is.
this is what it was
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.21331931.LA11G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c3d94491
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
this is now
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.213311491.A04G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.11.1700.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c88f4560
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
First - remove all serial & imei no. from your above post.
As I said, it is not easy to fix this with S-On device. What you can try is to install the latest AT&T 6.20.502.5 firmware first then run 6.20.502.5 RUU
Read this for the firmware and how-to : http://forum.xda-developers.com/showpost.php?p=66886759&postcount=23
You can get the RUU here : http://www.htc.com/us/support/htc-one-m8-att/news/

ckpv5 said:
First - remove all serial & imei no. from your above post.
As I said, it is not easy to fix this with S-On device. What you can try is to install the latest AT&T 6.20.502.5 firmware first then run 6.20.502.5 RUU
Read this for the firmware and how-to : http://forum.xda-developers.com/showpost.php?p=66886759&postcount=23
You can get the RUU here : http://www.htc.com/us/support/htc-one-m8-att/news/
Click to expand...
Click to collapse
so your saying, install the ruu, update the firmware, then re install viper?
Can't I just update the firmware like I did before? It was S-On before I updated the firmware

The ruu won't install. it says needs more then 30% battery, yet it is fully charged

vertigo262 said:
so your saying, install the ruu, update the firmware, then re install viper?
Click to expand...
Click to collapse
No .. I don't say that ... read again ...
Flash firmware.zip first then RUU ...
or install ROM first, don't reboot the system, but reboot to bootloader, relock bootloader then flash firmware.zip
As you already flashed a wrong firmware, as I said this may work and may not work but the only way that you can try to fix the wrong firmware installed.
---------- Post added at 02:49 PM ---------- Previous post was at 02:49 PM ----------
vertigo262 said:
The ruu won't install. it says needs more then 30% battery, yet it is fully charged
Click to expand...
Click to collapse
Because you have wrong firmware installed.

but with what firmware.zip? I never got the right firmware.zip to begin with so I don't have any firmware files to update with

vertigo262 said:
but with what firmware.zip? I never got the right firmware.zip to begin with so I don't have any firmware files to update with
Click to expand...
Click to collapse
That show you don't read all the posts that I posted .. the firmware.zip is posted in the post that earlier posted
You have to wait for someone else I guess who can write a post that you can understand .. maybe my English is not good enough ... good luck
ckpv5 said:
First - remove all serial & imei no. from your above post.
As I said, it is not easy to fix this with S-On device. What you can try is to install the latest AT&T 6.20.502.5 firmware first then run 6.20.502.5 RUU
Read this for the firmware and how-to : http://forum.xda-developers.com/showpost.php?p=66886759&postcount=23
You can get the RUU here : http://www.htc.com/us/support/htc-one-m8-att/news/
Click to expand...
Click to collapse

ok .. now that I understand what you are saying. because you had the RUU .exe and also were explaining how to update the firmware at the same time while the firmware was burried a couple of levels of posts, I didn't understand what you were saying.
so it looks like the firmware updated successfully
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.20.502.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I unlocked the firmware through the htc website with the Unlock_code.bin
because fastbook oem unlock didn't work.
had to reinstall twrp and that worked after reinstall. although lots of mounting file system errors. with /Data I don't know if that's normal.
seems to be fixed after formatting
Now I will try installing a rom

vertigo262 said:
had to reinstall twrp and that worked after reinstall. although lots of mounting file system errors. with /Data I don't know if that's normal.
seems to be fixed after formatting
Now I will try installing a rom
Click to expand...
Click to collapse
Now you got it.
And yes, after changing from GPE to Sense GSM (AT&T) firmware, you need to reinstall TWRP (the latest 3.0.2-0) and you MUST format data partition, in TWRP - select WIPE, Format Data - yes ... because GPE & Sense data partition is of different size.

Please where can i get compatible firmware for my htc one m8s with S.O 1.12.1405.6 . I have been on this over 3 weeks now but all no avail.

M8 device halted due to large image update fail!

Hey Guys:
I have HTC One M8 Indian version with this info :
/***
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.24.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.720.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B65000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0​​***/
I rebooted to HBoot while 0P6BIMG_M8_UHL_M60_SENSE70_MR_hTC_Asia_India_6.15.720.2_Radio_1.29.214500021.12G_20.72.4196t.01_F_release_469495_signed_2_4.zip
is in my external sdcard named 0P6BIMG. and it gives me an error saying device halted due to large image update fail!
press power to reboot.
What should i do, and what is the problem.

You need to flash firmware.zip for version 6.15. 720.2 before you can run the Marshmallow RUU. But not sure where you can find that specific firmware posted.

redpoint73 said:
You need to flash firmware.zip for version 6.15. 720.2 before you can run the Marshmallow RUU. But not sure where you can find that specific firmware posted.
Click to expand...
Click to collapse
My thread - post #5 is the Marshmallow signed firmware collection

redpoint73 said:
You need to flash firmware.zip for version 6.15. 720.2 before you can run the Marshmallow RUU. But not sure where you can find that specific firmware posted.
Click to expand...
Click to collapse
O Thanks man you saved me!

ckpv5 said:
My thread - post #5 is the Marshmallow signed firmware collection
Click to expand...
Click to collapse
Thanks for the firmware I Love you guys

DoctorLionOrshid said:
Hey Guys:
I have HTC One M8 Indian version with this info :
/***
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.24.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.720.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B65000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0​​***/
I rebooted to HBoot while 0P6BIMG_M8_UHL_M60_SENSE70_MR_hTC_Asia_India_6.15.720.2_Radio_1.29.214500021.12G_20.72.4196t.01_F_release_469495_signed_2_4.zip
is in my external sdcard named 0P6BIMG. and it gives me an error saying device halted due to large image update fail!
press power to reboot.
What should i do, and what is the problem.
Click to expand...
Click to collapse
0P6BIMG_M8_UHL_M60_SENSE70_MR_hTC_Asia_India_6.15.720.2_Radio_1.29.214500021.12G_20.72.4196t.01_F_release_469495_signed_2_4.zip is not supported to your phone.
You need to find firmware with same Baseband or Radio no.

janrick123 said:
0P6BIMG_M8_UHL_M60_SENSE70_MR_hTC_Asia_India_6.15.720.2_Radio_1.29.214500021.12G_20.72.4196t.01_F_release_469495_signed_2_4.zip is not supported to your phone.
You need to find firmware with same Baseband or Radio no.
Click to expand...
Click to collapse
I think he might've figured that out in the 3 years that passed since last post.

Need Lollipop RUU

Hi! Can anyone help me to get the Lollipop RUU for HTC One M8, please? Thanks in advance!

Try here:
http://androidruu.com/?developer=M8

ssmunif said:
Hi! Can anyone help me to get the Lollipop RUU for HTC One M8, please? Thanks in advance!
Click to expand...
Click to collapse
If you give more info on which M8 version you own, we can help you determine which RUU. The RUU needs to match your CID and MID.

redpoint73 said:
If you give more info on which M8 version you own, we can help you determine which RUU. The RUU needs to match your CID and MID.
Click to expand...
Click to collapse
Here's my Getvar all-
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.19.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH4CCWM03367
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: :silly:
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 5e4b24e4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.153s

Any specific reason you want LP? MM is the current, and has been since Dec 2015.
MM RUU for your version M8 is here (its a zip format RUU, so follow the instructions in the post): http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
Also, be sure to delete the IMEI and serial number from your previous post. These are personal info that should never be posted online.

redpoint73 said:
Any specific reason you want LP? MM is the current, and has been since Dec 2015.
MM RUU for your version M8 is here (its a zip format RUU, so follow the instructions in the post): http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
Also, be sure to delete the IMEI and serial number from your previous post. These are personal info that should never be posted online.
Click to expand...
Click to collapse
The getvar all which I posted is an older version. I have the latest RUU installed, with MM and latest bootloader. The thing is that, I am feeling like the charge is finishing faster while playing games. Moreover, I have another problem. I don't get cellular connectivity. The sim works fine on other phones. The sim is also detected by M8, but no signal. It worked before. I tried every fix on the internet (as far as I could find by searching Google). Can you please help me with that? I don't really want to change to lollipop btw. Please, could you solve the problem? Please?

ssmunif said:
I have the latest RUU installed, with MM and latest bootloader.
Click to expand...
Click to collapse
You can't downgrade (such as MM to LP) by RUU with s-on.
ssmunif said:
The getvar all which I posted is an older version.
Moreover, I have another problem. I don't get cellular connectivity.
Click to expand...
Click to collapse
Post a current getvar all, and then let's see what we can do.

redpoint73 said:
You can't downgrade (such as MM to LP) by RUU with s-on.
Post a current getvar all, and then let's see what we can do.
Click to expand...
Click to collapse
Here's my getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH4CCWM03367
(bootloader) imei: xxxxxxxxxxxxxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.083s
Please help me solve the cellular connectivity problem! Please! I am desperate...

ssmunif said:
Please help me solve the cellular connectivity problem!
Click to expand...
Click to collapse
Did it work when you were on KitKat?

redpoint73 said:
Did it work when you were on KitKat?
Click to expand...
Click to collapse
Yes

Which S-OFF Method is not obselete and works (except SunShine)

Hello guys,
i am really desperate, sitting here like for 8 hours and cant get my FW updated because this phone has a ****ty CID. Is there any WORKING possibility except Sunshine which can get my phone S-OFF? I want to use SuperCID?
Please help

Spacket said:
Hello guys,
i am really desperate, sitting here like for 8 hours and cant get my FW updated because this phone has a ****ty CID. Is there any WORKING possibility except Sunshine which can get my phone S-OFF? I want to use SuperCID?
Please help
Click to expand...
Click to collapse
you can't it's the only method
and what about cid and the update can you elaborate ?
Sent from my HTC One M8 using XDA Labs

The problem is, i dont have Wifi, everytime an error occurs (Failed to load drivers). With SunShine i need a working internet connection, which i dont have. And at the Android 5 Stock ROM i dont even have Mobile internet.
An update liker over OTA would be enough, but i have a ****ty CID and version:
c:\>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.19.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: T-MOB003
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 23c984e1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Can you help find the right one?

Spacket said:
The problem is, i dont have Wifi, everytime an error occurs (Failed to load drivers). With SunShine i need a working internet connection, which i dont have. And at the Android 5 Stock ROM i dont even have Mobile internet.
An update liker over OTA would be enough, but i have a ****ty CID and version:
c:\>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.19.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: T-MOB003
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 23c984e1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Can you help find the right one?
Click to expand...
Click to collapse
Hboot 3.18
i believe your wifi issue is because you have an outdated firmware ( kitkat ) i think
so you need to flash the latest firmware ( marshmallow ) then flash the latest twrp ( 3.0.2-0 ) and flash your rom or restore stock backup ( 6.12.114.4 )
then you can achieve s-off ( if you need it for something else )
Here is the links
signed firmware 6.12.114.4
https://mega.nz/#!7YxCib7b!DqW43XSROE7ZlpTykZP8mItSe8MyrFCI969TVtkpeIs
stock backup 6.12.114.4
https://mega.nz/#!SU1EgT7C!KBM_zFK2Yo3Pf5whnsoq0jppNU-ptsIzfDbIJ7QDUUY
stock recovery in case you need it 6.12.114.4
https://mega.nz/#!LUZSQQqD!7oOLFpLHH285v6DfqI8JQTaFwznZrsn_uG2NjKbyypg
TWRP
https://twrp.me/devices/htconem8gsm.html
and all the thanks goes to @ckpv5 for his awesome thread all you need is there and the links i grabbed it from there
http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860

Yep, was thinking bout that too, looked at my gfs firmware and hboot and saw that she had 3.19hboot und 1.29 Firmware. So updated the firmware and it worked!
Thank you