Related
Hi All
i have some bizarre things going on with my new HTC one m8
I rooted and flashed a custom ROM, but the WiFi stopped working (i flashed it to Android_Revolution_HD-One_M8_21.0)
so... i tried to get it back to stock (major pain) but i ended up restoring a backup of a 4.3 stock ROM i found on the web - EE (ORANG001) 1.54.61.5 (Philz)
hurrah everything worked great until an OTA popped up, i installed the update and again the WiFi stopped working
any ideas as to what I'm doing wrong? oh I cant get s-off either, I tried rumrunner and sunshine
below is the phone info.
if you can suggest how I get back to stock, or a version of android that the WiFi will work after an update then id be very grateful
(bootloader) cid: ORANG001
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.19.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.26.61.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SOMESERIALNO
(bootloader) imei: HIDDENJUSTINCASE
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: ORANG001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 93c21861
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.010s
allenjamieson said:
Hi All
i have some bizarre things going on with my new HTC one m8
I rooted and flashed a custom ROM, but the WiFi stopped working (i flashed it to Android_Revolution_HD-One_M8_21.0)
so... i tried to get it back to stock (major pain) but i ended up restoring a backup of a 4.3 stock ROM i found on the web - EE (ORANG001) 1.54.61.5 (Philz)
hurrah everything worked great until an OTA popped up, i installed the update and again the WiFi stopped working
any ideas as to what I'm doing wrong? oh I cant get s-off either, I tried rumrunner and sunshine
below is the phone info.
if you can suggest how I get back to stock, or a version of android that the WiFi will work after an update then id be very grateful
(bootloader) cid: ORANG001
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.19.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.26.61.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxx
(bootloader) imei: HIDDENJUSTINCASE
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: ORANG001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 93c21861
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.010s
Click to expand...
Click to collapse
First and foremost, always hide your serialno as well as IMEI for your own safety.
xunholyx said:
First and foremost, always hide your serialno as well as IMEI for your own safety.
Click to expand...
Click to collapse
Damn i missed the serial no,cheers!
can you hide it in your quote?
allenjamieson said:
Damn i missed the serial no,cheers!
can you hide it in your quote?
Click to expand...
Click to collapse
Sh*t! Sorry buddy, I was in too much of a rush to post it that I forgot to do it myself.
xunholyx said:
Sh*t! Sorry buddy, I was in too much of a rush to post it that I forgot to do it myself.
Click to expand...
Click to collapse
No probs! easy done
allenjamieson said:
No probs! easy done
Click to expand...
Click to collapse
your phone is the first i have seen that Sunshine will not work ...what was the error ?
flash the 4.3 stock ROM EE (ORANG001) 1.54.61.5 (Philz) you have and flash the stock recovery that goes with it
do a factory reset from the stock recovery and try the OTA again
Flashing any 4.4.4 based rom requires the latest firmware be flashed first if you don't already have it.... Or WiFi won't work. ?
Need to update cid and flash 4.4.4 firmware in order to run ANY 4.4.4 rom. Only thing I can think of is a mismatched firmware is the only place I have seen this occur with certain users devices and also did you flash the kernel seperately? I believe if still s-on this has to be done manually
allenjamieson said:
Hi All
i have some bizarre things going on with my new HTC one m8
I rooted and flashed a custom ROM, but the WiFi stopped working (i flashed it to Android_Revolution_HD-One_M8_21.0)
so... i tried to get it back to stock (major pain) but i ended up restoring a backup of a 4.3 stock ROM i found on the web - EE (ORANG001) 1.54.61.5 (Philz)
hurrah everything worked great until an OTA popped up, i installed the update and again the WiFi stopped working
any ideas as to what I'm doing wrong? oh I cant get s-off either, I tried rumrunner and sunshine
below is the phone info.
if you can suggest how I get back to stock, or a version of android that the WiFi will work after an update then id be very grateful
(bootloader) cid: ORANG001
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.19.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.26.61.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SOMESERIALNO
(bootloader) imei: HIDDENJUSTINCASE
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: ORANG001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 93c21861
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.010s
Click to expand...
Click to collapse
Ahh I haven't flashed the kernel. Ill search for the instructions
Sent from my HTC One_M8 using XDA Free mobile app
adb reboot bootloader...set it to fastboot usb.. Copy boot.img to adb/fastboot location,run command fastboot flash boot.img...then run fastboot reboot
allenjamieson said:
Ahh I haven't flashed the kernel. Ill search for the instructions
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
I have this same problem, have you had any luck getting it sorted?
Ok, i tried to install VenonOne, it installed first time but my wifi didnt work, so i searched around and found out i needed to update my firmware, which needed S-off, which i cant becuase i dont have the money for sunshine. and problem after problem and following half arsed tutoials online solved nothing. i can only go to bootloader and recovery. not sure what to do,
i have twrp installed
Im a D*ck head and didnt make a backup becuae it 'looked easy enough'
any help would be great. would like to be using venomone but atm any os will do
Every rom i install cause the wifi to not work, i press to turn it on and nothing
Thanks guys
michaelcarrot1 said:
Im a D*ck head and didnt make a backup becuae it 'looked easy enough'
Click to expand...
Click to collapse
You probably realize it at this point; but my rule of thumb is always make a backup before flashing anything (or at a minimum, have a known good backup or known good ROM ready to flash). Its got nothing to do with how "easy" a process is. Things can go wrong even with the simplest mods, to the most knowledgeable users, and even if you do nothing wrong.
You don't need s-off to update your firmware.
Either run a Lollipop (or Marshmallow) RUU intended for your CID (relock bootloader in order to RUU). Keeping in mind that this will wipe the phone.
Alternately (such as if there is no RUU for your version), restore a stock ROM that corresponds to your current firmware, restore corresponding stock recovery. Then do OTA update, which will also update your firmware.
After updating the firmware by either of the 2 above methods, just flash TWRP back onto the phone (in case of the RUU method, you'll need to unlock the bootloader again, before you can flash TWRP) and flash your custom ROM of choice.
If you do fastboot getvar all, and post the results (delete IMEI and serial numbers) we can offer some more specific assistance.
thanks for taking your time to help,
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.19.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 5e4b24e4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.009s
I'm on O2 Uk and all the RUU are named Verizon and other american networks. which RUU do i use
Sorry for all the silly questions
michaelcarrot1 said:
thanks for taking your time to help,
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.19.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 5e4b24e4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.009s
I'm on O2 Uk and all the RUU are named Verizon and other american networks. which RUU do i use
Sorry for all the silly questions
Click to expand...
Click to collapse
Use this ruu just relock bootloader it's ruu exe it's simple to use and let me know
https://www.androidfilehost.com/?fid=95916177934555499
I changed the screen on my HTC One M8 and now the phone gets stuck on the HTC One splash screen. Ive treble checked all connections and for damage and cant see anything. I tried Factory reset, but its just gets stuck at Andriod is starting after updating all the apps. My only option seems to be install ruu? Could someone tell me which ruu I should use please?
C:\adb>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.161.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: VODAP001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.163s
C:\adb>
I need the same RUU for different reason.
would this work?
http://forum.xda-developers.com/showpost.php?p=64894064&postcount=849
We need exactly 6.12.161.4, 161 is the most important part
here is a link to 6.12.161.4 but its a file for twrp? can that be used no?
http://forum.xda-developers.com/showpost.php?p=64893769&postcount=842
if u have custom recovery, then yes, that is a nandroid backup which u could restore, since my phone is 100% stock, i cant
jgarkalns said:
if u have custom recovery, then yes, that is a nandroid backup which u could restore, since my phone is 100% stock, i cant
Click to expand...
Click to collapse
mine is 100% stock too
this link is 6.12.161.4 firmware, is this what we need?
https://mega.nz/#!7Z0XBBKa!Yd93Su0asqJcaETQmNspkyX4KhWuPKHkmvJgcAQrnwI
We need RUU, which i couldnt find, you dont need to worry about Firmware, we just have to find RUU for Vodafone UK, even if it's 5.0.2, or 4.4.4, don't care, cause we can use OTA to update if the phone is 100% stock.
this one any good no?
https://www.androidfilehost.com/?fid=95916177934518148
It's 401 for European unlocked, we need vodafone uk161
if I unlock the bootloader, do I still need to have usb debugging enabled in the settings before I can install twrp and an nandriod backup?
i dont think so, u can check forums noob friendly guides
I have an htc one m8 ATT phone I want to install the ViperOneM8 5.02 rom on which says I need to update the firmware to a marshmellow firmware I think.
Or the latest.
While I have found some documentation how to do this on the net, I am not sure where I obtain these files.
The firmware.zip I believe it is
Help on this would be appreciated
Right now I am using hboot 3.16 and twrp 2.7
I found this link
http://android-revolution-hd.blogspot.com/p/android-revolution-hd-mirror-site-var.html
https://www.androidfilehost.com/?w=files&flid=32780
and grabbed the 4.16.1540.8.zip but want to make sure I am grabbing the correct and latest version. Because I don't want to brick my phone
Post your fastboot getvar all result without serial & imei no.
You may need a different firmware if it's AT&T & S-On and also don't use that outdated 2.7 TWRP.
ckpv5 said:
Post your fastboot getvar all result without serial & imei no.
You may need a different firmware if it's AT&T & S-On and also don't use that outdated 2.7 TWRP.
Click to expand...
Click to collapse
For some devices, TWRP 2.7 is recommended due to how older boot loaders may not take it well.
I like TWRP. When its workable, its array of tools is superior to CWM. But after I tried 2.8.x, I decided CWM or TWRP at or below 2.7.0.2 is safer and less crash prone.
When I attempted to boot to recovery it would boot loop. Please be mindful of boot signing. If you so slightly make your OEM software notice things a fuse will make your phone implode.
Sent from my HTC M8 GPE
? Mass Transit Honchkrow ?
furboom1240 said:
For some devices, TWRP 2.7 is recommended due to how older boot loaders may not take it well.
Click to expand...
Click to collapse
Read again what he is trying to do man ... he's going to update to Marshmallow firmware and that outdated TWRP 2.7 won't work for him (he can't even install his intended ViperOneM8 5.02 ROM with that outdated TWRP)
..... that's why I said don't use that outdated TWRP
ckpv5 said:
Read again what he is trying to do man ... he's going to update to Marshmallow firmware and that outdated TWRP 2.7 won't work for him (he can't even install his intended ViperOneM8 5.02 ROM with that outdated TWRP)
..... that's why I said don't use that outdated TWRP
Click to expand...
Click to collapse
Good point. For some odd reason CM pairs ROMs and Recoveries. If you check the Dev Auto update option would that be unnecessary.
It's been an itching question I actually had...
Sent from my HTC M8 GPE
? Mass Transit Honchkrow ?
I originally had twrp 2.8 on and tried to install the latest. But it was freezing because I think I need a newer version of hboot. which I have 3.16 on it.
I then downgraded to 2.7 to get it working. I installed ViperOnem8 Rom not reading the website successfully. but have issues with wifi, and 2 minute boot times.
"The 5.0.x ROM is based on HTC’s latest M8 Sense 7 Android 6.0.x base and requires you to update your firmware to at least the 6.0.x (Marshmallow) version! If you don’t you will run into some issues such as Wi-Fi not working or No Boot, etc.
We cannot install the firmware for you during ROM installation so you will need to take the steps to update the firmware on your own."
So I need to update my firmware. I have an ATT S-ON phone. But I have no clue where to get the firmware from, and make sure it is the right one and recent.
I need to update my firmware in order for this rom and a newer version of twrp to work correctly
ok, so
I upgraded to 3.11.1700.5 firmware I found. and that was successful.
Then I upgraded my twrp to twrp-3.0.2-0-m8 and that was successful
Now I am trying to install either Revolution Rom, or ViperOnem8 and both have the same problem. After install they keep booting into twrp and won't load.
I tried Cynamod and that installed and booted fine.
I believe both Revolution and Viper use the Aroma installer. Anyone know what is going on with these and a fix to stop it from booting into twrp?
Need advice
ckpv5 said:
Post your fastboot getvar all result without serial & imei no.
You may need a different firmware if it's AT&T & S-On and also don't use that outdated 2.7 TWRP.
Click to expand...
Click to collapse
This my phone info
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.21331147A1.14G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.34.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B67000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 260ae94e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
Which RUU can I use ?
vertigo262 said:
ok, so
I upgraded to 3.11.1700.5 firmware I found. and that was successful.
Then I upgraded my twrp to twrp-3.0.2-0-m8 and that was successful
I believe both Revolution and Viper use the Aroma installer. Anyone know what is going on with these and a fix to stop it from booting into twrp?
Click to expand...
Click to collapse
Wrong firmware. You installed an old version of GPE firmware.
You can't install Sense ROM like Revolution and Viper on GPE firmware.
I asked you to post fastboot getvar all to help you but it seems that you made it harder now because you installed a wrong firmware. If it is S-Off, then it is easy to fix.
ckpv5 said:
Wrong firmware. You installed an old version of GPE firmware.
You can't install Sense ROM like Revolution and Viper on GPE firmware.
I asked you to post fastboot getvar all to help you but it seems that you made it harder now because you installed a wrong firmware. If it is S-Off, then it is easy to fix.
Click to expand...
Click to collapse
sorry, I must have missed your response. was in phone hell world!
here it is.
this is what it was
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.21331931.LA11G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c3d94491
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
this is now
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.213311491.A04G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.11.1700.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c88f4560
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
vertigo262 said:
sorry, I must have missed your response. was in phone hell world!
here it is.
this is what it was
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.21331931.LA11G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c3d94491
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
this is now
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.213311491.A04G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.11.1700.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c88f4560
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
First - remove all serial & imei no. from your above post.
As I said, it is not easy to fix this with S-On device. What you can try is to install the latest AT&T 6.20.502.5 firmware first then run 6.20.502.5 RUU
Read this for the firmware and how-to : http://forum.xda-developers.com/showpost.php?p=66886759&postcount=23
You can get the RUU here : http://www.htc.com/us/support/htc-one-m8-att/news/
ckpv5 said:
First - remove all serial & imei no. from your above post.
As I said, it is not easy to fix this with S-On device. What you can try is to install the latest AT&T 6.20.502.5 firmware first then run 6.20.502.5 RUU
Read this for the firmware and how-to : http://forum.xda-developers.com/showpost.php?p=66886759&postcount=23
You can get the RUU here : http://www.htc.com/us/support/htc-one-m8-att/news/
Click to expand...
Click to collapse
so your saying, install the ruu, update the firmware, then re install viper?
Can't I just update the firmware like I did before? It was S-On before I updated the firmware
The ruu won't install. it says needs more then 30% battery, yet it is fully charged
vertigo262 said:
so your saying, install the ruu, update the firmware, then re install viper?
Click to expand...
Click to collapse
No .. I don't say that ... read again ...
Flash firmware.zip first then RUU ...
or install ROM first, don't reboot the system, but reboot to bootloader, relock bootloader then flash firmware.zip
As you already flashed a wrong firmware, as I said this may work and may not work but the only way that you can try to fix the wrong firmware installed.
---------- Post added at 02:49 PM ---------- Previous post was at 02:49 PM ----------
vertigo262 said:
The ruu won't install. it says needs more then 30% battery, yet it is fully charged
Click to expand...
Click to collapse
Because you have wrong firmware installed.
but with what firmware.zip? I never got the right firmware.zip to begin with so I don't have any firmware files to update with
vertigo262 said:
but with what firmware.zip? I never got the right firmware.zip to begin with so I don't have any firmware files to update with
Click to expand...
Click to collapse
That show you don't read all the posts that I posted .. the firmware.zip is posted in the post that earlier posted
You have to wait for someone else I guess who can write a post that you can understand .. maybe my English is not good enough ... good luck
ckpv5 said:
First - remove all serial & imei no. from your above post.
As I said, it is not easy to fix this with S-On device. What you can try is to install the latest AT&T 6.20.502.5 firmware first then run 6.20.502.5 RUU
Read this for the firmware and how-to : http://forum.xda-developers.com/showpost.php?p=66886759&postcount=23
You can get the RUU here : http://www.htc.com/us/support/htc-one-m8-att/news/
Click to expand...
Click to collapse
ok .. now that I understand what you are saying. because you had the RUU .exe and also were explaining how to update the firmware at the same time while the firmware was burried a couple of levels of posts, I didn't understand what you were saying.
so it looks like the firmware updated successfully
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.20.502.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I unlocked the firmware through the htc website with the Unlock_code.bin
because fastbook oem unlock didn't work.
had to reinstall twrp and that worked after reinstall. although lots of mounting file system errors. with /Data I don't know if that's normal.
seems to be fixed after formatting
Now I will try installing a rom
vertigo262 said:
had to reinstall twrp and that worked after reinstall. although lots of mounting file system errors. with /Data I don't know if that's normal.
seems to be fixed after formatting
Now I will try installing a rom
Click to expand...
Click to collapse
Now you got it.
And yes, after changing from GPE to Sense GSM (AT&T) firmware, you need to reinstall TWRP (the latest 3.0.2-0) and you MUST format data partition, in TWRP - select WIPE, Format Data - yes ... because GPE & Sense data partition is of different size.
Please where can i get compatible firmware for my htc one m8s with S.O 1.12.1405.6 . I have been on this over 3 weeks now but all no avail.
So i accidentally wiped the phone including the internal storage and the OS instead of factory resetting (wasn't paying attention) and tried to re install the android marshmallow OS onto the phone which didn't work..
i managed to flash the twrp by following another forum where someone had the same problem, using the adb process to flash the bootloader etc but now i can't access the recovery at all, it just says entering recovery and remains idle until i get bored of waiting and power off.
Can anyone help me?
i can provide whatever information is necessary for you to help, just need my phone revitalised as i desperately need it for my new job that i should hopefully be starting at the end of the week.
thanks in advance!
@mcg0v
post getvar all after removing serialno and imei
this info will help to know which RUU you need to flash and return your device to stock
any info you can provide is helpful
C:\Users\mcg0v\Desktop\Android\sdk-tools\sdk-tools>getvar all
'getvar' is not recognized as an internal or external command,
operable program or batch file.
C:\Users\mcg0v\Desktop\Android\sdk-tools\sdk-tools>fastboot getvar all
< waiting for any device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4266mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.318s
Hope this helps, I'm really not that good with anything Android related as of yet, but i really need this phone fixed asap.
@mcg0v
you post your issue in the wrong forum
your device is HTC One m7
this forum is for HTC One m8
go to this thread http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
this is for your device ask there some one will guide you
I have quite the same problem (and i have One M8). Can't enter TWRP recovery, bootloop - just shows an endless loading, i can start the phone without that by pushing pwr button/VOL+/VOL- at the same time (fastboot mode - ok). I want to get the stock back, but it's impossible without entering TWRP. Can someone help me please? It seems that i do not understand this thing anymore.
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.15.2133156.UA13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: removed
(bootloader) imei: removed
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: VODAP102
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.049s
andreech95 said:
I have quite the same problem (and i have One M8). Can't enter TWRP recovery, bootloop - just shows an endless loading, i can start the phone without that by pushing pwr button/VOL+/VOL- at the same time (fastboot mode - ok). I want to get the stock back, but it's impossible without entering TWRP. Can someone help me please? It seems that i do not understand this thing anymore.
Click to expand...
Click to collapse
Fastboot erase cache, then flash TWRP again in fastboot. Try TWRP 2.8.1.0, which is an older version (more compatible with your old firmware). Then see if you can boot into recovery.
Or flash signed firmware, to update firmware (yours is ancient) then flash TWRP 2.8.7 and restore a newer stock backup (corresponding to the firmware flashed).
redpoint73 said:
Fastboot erase cache, then flash TWRP again in fastboot. Try TWRP 2.8.1.0, which is an older version (more compatible with your old firmware). Then see if you can boot into recovery.
Or flash signed firmware, to update firmware (yours is ancient) then flash TWRP 2.8.7 and restore a newer stock backup (corresponding to the firmware flashed).
Click to expand...
Click to collapse
Thanks a lot. I've tried the first solution and at least TWRP is now working. I've tried the same thing, but it seems, that it was a wrong version of TWRP
Many apologies, turns out i misread the model and its actually the M7 i have. But im glad that this post is helping others with my original problem and thanks to other members who contributed to helping!
-mcg0v