Related
I accidentally formatted the system partition so the tablet will not boot. I can't get back in to TWRP, I didn't have anything to flash in there anyway because CM would fail. What can I do?
Thank you.
You could try the LG mobile support tool
techrider6262 said:
You could try the LG mobile support tool
Click to expand...
Click to collapse
I think you have to pay to use it.
No its free just go the the website and download it.You can downloaded it from the link in this post.
http://forum.xda-developers.com/showthread.php?t=2543350
Can you write to it in ADB? How far does it come when it tries to boot? just LG bootloop? And what edition of TWRP did you use to flash?
CuraeL said:
Can you write to it in ADB? How far does it come when it tries to boot? just LG bootloop? And what edition of TWRP did you use to flash?
Click to expand...
Click to collapse
I realize why it didn't flash. Because I was using an older version of TWRP that wouldn't flash AOSP roms. Is there any way to boot to recovery from the device being off?
The method in the link doesn't seem to work anymore.
How far do you get in the boot? LG screen? When connect to PC do you get connect/disconnect sounds? Please answer the questions as I'm thinking about this. I can't find any key combos so we need to find out if we have a small window where we can talk to ADB.. Any connection sounds? How far do you get?
Are you familiar with ADB and Fastboot?
CuraeL said:
How far do you get in the boot? LG screen? When connect to PC do you get connect/disconnect sounds? Please answer the questions as I'm thinking about this. I can't find any key combos so we need to find out if we have a small window where we can talk to ADB.. Any connection sounds? How far do you get?
Are you familiar with ADB and Fastboot?
Click to expand...
Click to collapse
I don't hear any sounds. It just stays at the LG screen. I made it to the factory reset screen but it didn't do anything. I followed these steps:
Make sure your device is fully charged and turned off.
Simultaneously press and hold the power and volume down buttons.
When the LG logo shows up, release the power button only.
Now press and hold the power and volume up button while keeping your hold on the volume down button.
When the factory reset screen appears, release your hold on all buttons.
Press the power button to continue.
Press the power button again to confirm if you’re sure you wish to continue with the reset.
Click to expand...
Click to collapse
ADB doesn't work at the LG screen, I just get the error: device not found message.
I can just send it back but I'd prefer to get it working.
Thanks
skatingrocker17 said:
I don't hear any sounds. It just stays at the LG screen. I made it to the factory reset screen but it didn't do anything. I followed these steps:
ADB doesn't work at the LG screen, I just get the error: device not found message.
I can just send it back but I'd prefer to get it working.
Thanks
Click to expand...
Click to collapse
Okay, okay, I dunno what you can do maybe ADB Works in here: Turn off the device AND disconnect from PC. When shut Down, you DONT hold power, but hold Volume up + Volume Down, when you hold both, you plug in USB cable. This takes you to download mode. That is perhaps a step in the right direction if you can start ADB from download mode. Then you can boot into recovery. But I don't know. This is maybe the last option for you. No recovery key combo has been discovered yet. If you can do a fastboot boot recovery from download mode, that would be golden. Then you can use the SD Card to get back with the newest TWRP and the CM11 nightly. Please let me know if this Works man. I'm sorry for your loss, otherwise. Factory Reset, as you said, will not work, since there's nothing to "restore" from. You deleted it. :/
Unfortunately, ADB doesn't work in download mode.
skatingrocker17 said:
Unfortunately, ADB doesn't work in download mode.
Click to expand...
Click to collapse
Were you able to download the LG tool?
skatingrocker17 said:
Unfortunately, ADB doesn't work in download mode.
Click to expand...
Click to collapse
Damn that sucks. I was looking around the G2 forums to see about download mode and what LG usually did with it. Apparently they are using something called KDZ files, and they are able to flash stock roms back onto the device with something called FlashTool. Now, if it were my tablet and it was in the state yours is, I would try and read the tutorial. And then I'd follow it step by step but instead of the G2 KDZ, I'd see if I could find a KDZ with a G Pad rom instead. And just.. Yolo that ****.. From download mode.
Here's the thread, if you wanna read it.. http://forum.xda-developers.com/showthread.php?t=2432476. I dunno man. The LG Tool thing, maybe you should try and see what techrider6262 is saying, he might have an idea as well, otherwise, just go all out crazy and see if you can magically use the FlashTool on your G Pad instead of the G2, since they are from "same line up." I know that's not the same as same model and so on.. But still.. Download mode.. Is download mode. Ofc. the tool itself or the settings in the tool might not work.. But.. You know. Why not.. Can't hurt.. Download mode will prolly still be available afterwards.. "For science."
got the same problem. i couldnt i wiped all data on the tablet and couldnt select the rom from the ext.sd. now its stuck at the lg logo.
skatingrocker17 said:
Unfortunately, ADB doesn't work in download mode.
Click to expand...
Click to collapse
blazze11 said:
got the same problem. i couldnt i wiped all data on the tablet and couldnt select the rom from the ext.sd. now its stuck at the lg logo.
Click to expand...
Click to collapse
This guys.. Is for download mode fix. I am pretty sure this works. Since you have access to Dload mode. Good luck.
I use the download mode to install the original official rom.
1. Download the LG MOBILE SUPPORT TOOL by this link:http://www.lg.com/us/support-mobile/lg-V500-White
2. install the software in computer, Plug in USB cable with computer, Open the software LG MOBILE SUPPORT TOOL.
3. Turn off Pad and unplug.
4. press hold both volume up and volume down, Then plug in usb cable, And then pad is in downlaod mode
5. USB driver will be insatlled automatically
6. In LG MOBILE SUPPORT TOOL, click option---.country and language-OK, then click option--upgrade recovery
7. It will installe original official rom automatically.
8. After about 1.5 hours, The pad will be installed the last official room.
^ This is a quote and now I shut down the thread, sorry, don't know who said it, just got stoked when I saw it.
thanks, the tool is downloading the rom. hope its works.
// it worked thanks a lot, will try to flash cm 11 tomorrow again.
blazze11 said:
thanks, the tool is downloading the rom. hope its works.
// it worked thanks a lot, will try to flash cm 11 tomorrow again.
Click to expand...
Click to collapse
That is GREAT!
Now remember mate, clear DATA in TWPR, not system.. Never system. Clear only data/factory reset, then just flash CM 11. Nothing else is needed. Remember to install superSU from market after you get booted, otherwise root will not work. Update Binary in SuperSU.
Okay thanks for your help. Its so stupid that there is no key combination for recovery.
I will use your advice and try it later.
blazze11 said:
Okay thanks for your help. Its so stupid that there is no key combination for recovery.
I will use your advice and try it later.
Click to expand...
Click to collapse
Agreed.
blazze11 said:
Okay thanks for your help. Its so stupid that there is no key combination for recovery.
I will use your advice and try it later.
Click to expand...
Click to collapse
There is...
With device powered off do this...
Hold volume key down and press and hold power button.
When LG Logo appears let go of just the power key while still holding the volume key down and then press power key again and volume up while still holding down the volume key.
You get to the factory reset screen and just keep pressing power until you get into recovery.
AndroidUser00110001 said:
There is...
With device powered off do this...
Hold volume key down and press and hold power button.
When LG Logo appears let go of just the power key while still holding the volume key down and then press power key again and volume up while still holding down the volume key.
You get to the factory reset screen and just keep pressing power until you get into recovery.
Click to expand...
Click to collapse
Okay, i will try it next time. Everything is working right now.
Thanks
I have a F400K G3 (Korean Olleh). It's rooted and bumped. I flashed the bumped TWRP image via Flashify and rebooted recovery via Flashify. It works. But when I try boot to recovery from a complete shutdown. It just boots into safe mode. I did exactly what was stated in the Bump thread (Power+V. Down, when logo appears, release then press again quickly) and also tried substituting V. Down button with V. Up, but it still wont boot to recovery. It just keeps going into safe mode. The video provided in the thread was using an AT&T model so maybe it differs from every variant. I want to know if I'm doing something wrong or the instructions are wrong.
Thank you.
You tried without releasing? Just keep holding buttons
---------- Post added at 11:38 AM ---------- Previous post was at 11:37 AM ----------
Do you get to that factory reset screen?
DelBoy said:
You tried without releasing? Just keep holding buttons
---------- Post added at 11:38 AM ---------- Previous post was at 11:37 AM ----------
Do you get to that factory reset screen?
Click to expand...
Click to collapse
I have tried it as well without releasing. Does the same thing. And it never shows the reset screen. It just goes directly to the boot animation. Rebooting from Flashify also doesn't show the reset screen but it does get to TWRP. But I need to boot it from complete shutdown because I'm gonna test a Flashable zip ROM without root so rebooting using Flashify would be impossible.
Bump.
Seriously. Anyone?
I am subscribing because I have the exact same problem. I have tried every key combination I could find for the G2 and G3 but no luck...
This is exactly the kind of problems you get when using stuff like Flashify. The holding of the buttons etc you mentioned should work. Are you sure you aren't connected using a micro usb?
sprremix said:
This is exactly the kind of problems you get when using stuff like Flashify. The holding of the buttons etc you mentioned should work. Are you sure you aren't connected using a micro usb?
Click to expand...
Click to collapse
No, I am not connected to USB. If I reflash the recovery using ADB will it work? But I do have some worries because I'm using KitKat bootloader on a Lollipop Stock-based ROM (here) and I think I may get some errors.
It's not very important right now because I have root now and can reboot to recovery using Flashify.
I think all korean models cant enter recovery via hardware keys, mine is F400L and have the same problem.
Untouched LG G3
I have a completely untouched LG G3 uk version only official software no root etc and mine won't go into hard reset mode. I have tried 3 or 4 times it always goes into safe mode
same issue
f400k.
able to boot into recovery by softwares
but unable with hard keys.
last night was installing bliss pop. but stuck on boot animation. now wont go to recovery watsoever.
help.
rhtash said:
f400k.
able to boot into recovery by softwares
but unable with hard keys.
last night was installing bliss pop. but stuck on boot animation. now wont go to recovery watsoever.
help.
Click to expand...
Click to collapse
Turn off the phone completely. Press and hold Power and Volume Down. When the LG logo appears, release. After a split second, press volume down and volume up. White screen asking you to reset will appear. Press Yes two times using Volume buttons.
UP!!!
Any remedies? I justed from stock to cm12 LG g3 F400L..
Cant go to recovery mode. Cant flash anything..
Same prob,always going to safemode.f400k rooted,cloudy2.5
i've Lg g3 F4ooL and using Resrruction remic 5.5.5
I stuck in a Bootloop and my device is also not booting into Recovery or safe Mode.
Lg flash Tool is also not Connecting to my device in Downloadmode.
I think There is NO solution At ALl
Has anyone solved this issue?
to get in recovery on F460s, worked on mine, Press Vol-up + Power, as the logo appears release the keys and press Vol-up + Vol-down, you will boot into recovery.
I have the same issue, cant go into recovery using hard buttons on F400K. Any one able to succeed in this?
Same issue on LG G3 F460S, no combination of power + volume buttons + releasing them and pressing again when LG logo appears works. The device go straight into booting system and gets stuck. Is there any other method - maybe short-circuit some pins on the motherboard, to boot into recovery or do a system reset? Please...
OK, turns out that the combination is different for Korean models of G3, as misbah711 wrote, volume UP + power, when logo appears, release and press both volume UP + volume DOWN. If that does not work, try again, but release only the POWER button and press immediately volume DOWN (while volume UP was held all the time). Also, I first tried it without the back cover, as I have to remove battery to turn it off, did not work. Then with the cover it did, not sure if it's an important detail or not.
However it's not the end of the story for me. An image with Korean text appears, and nothing. No combination of power and volume buttons pressing does anything. I'm attaching the image. Also tried a web service to do Korean OCR and then used Google Translate - does not make any sense. Could anyone advise how to proceed and do a factory reset on this device? It won't boot into the system (gets stuck), no adb or any other communication with it.
Edit:
Turns out that when the Korean text appears and I connect USB cable to my PC, adb works correctly. Typed:
adb reboot recovery
The phone rebooted into recovery and now I'm doing a factory reset on it. Looks like all will be fine.
i have d851 on stock kitkat. I flashed TWRP and Philz but no way i can get into recovery mode. it always goes to fastboot mode no matter how I reboot into recovery. Now i am looking for stock recovery image. or a way to fix the twrp/philz. ROM boots just fine.
Please help lg g 3 won't enter custom recovery I've tried all button variations
Please someone help I have a rooted g3 and don't wanna brick it?????
Go into an adb terminal and type in
Code:
adb reboot recovery[/quote]. If you don't have adb, search up minimal adb and fastboot, and how to use it.
Sent from my SM-N9100 using Tapatalk
On computer or phone?
Sent from my VS985 4G using XDA Free mobile app
And my phone already has twrp, just can't access it from device being off, but twrp app lets me go to recovery, just not when phone is off. So this should fix that right?
Sent from my VS985 4G using XDA Free mobile app
Please someone help
I've seen people are viewing this post if anyone know how to fix my problem please help or message me, the minimal adb won't work unless the device is turned on in usb. debugging, I can access my recovery with phone on easily but while it's powered off I should be able to get to custom recovery by pressing volume down and power while phone is off, but this method isn't working. So if I get in bootloop I can't get into custom recovery...please anyone any ideas
Well it should be as simple as holding down power and volume button down things but i guess you've already tried that method many times and it didnt work so you ask then, right?
If your phone in bootloop, you can flash tot files and it will back to stock re-root and re-install trwp.
If your phone still (or already) normal, you can download an app that can take you to custom recovery such as rebooter or power menu, thats it.
Yea phone isn't in bootloop, but if I put a Rom on phone I have no way to access the recovery because the volume and power won't take me to the recovery, so if it goes into bootloop I'm outta of luck I don't understand why the hardware buttons won't take me to the recovery, have you ever heard of this problem
brozillatyler said:
I've seen people are viewing this post if anyone know how to fix my problem please help or message me, the minimal adb won't work unless the device is turned on in usb. debugging, I can access my recovery with phone on easily but while it's powered off I should be able to get to custom recovery by pressing volume down and power while phone is off, but this method isn't working. So if I get in bootloop I can't get into custom recovery...please anyone any ideas
Click to expand...
Click to collapse
How long are you holding the vol down and power buttons? It should be around 15-20 seconds, then your system recovery screen comes up, you choose factory data reset, yes, and then TWRP comes up. If that isn't working - are you sure your buttons are working OK?
If the phone is turned off is there any other way to access it while phone is off?
Yes buttons work fine I hold it down and it just goes to Verizon screen ?
Actually when I hold it down it just stays on logo and reboots back to logo over and over and over
Actually I hold it down and it reboots to logo over and over its like there's no recovery there I don't understand lol
If anyone has any ideas or thoughts on how to fix this please let me know
brozillatyler said:
If anyone has any ideas or thoughts on how to fix this please let me know
Click to expand...
Click to collapse
OK... Does your phone boot into your ROM at all or are you bootlooped? If your phone boots, download an app called flashify and get the proper twrp .img file for your model and flash the image using flashify. It's an easy app to use - just make sure you're using the correct twrp .img for your phone...from here: http://forum.xda-developers.com/lg-g3/orig-development/recovery-twrp-touch-recovery-2-8-2-0-t2966129
If you are bootlooped I would suggest starting over and reflashing back to stock using the tot or kdz method. Here is a guide: http://forum.xda-developers.com/verizon-lg-g3/general/restore-verizon-to-stock-t2827878 I know it can be a pain to get the download tool working properly sometimes, so it may take some effort to get it working, but be patient (and read a lot if you get stuck) and you will get it working.
I don't know how you got borked...maybe it was an un-bumped twrp image? Either way, it is what it is, just try not to do it again Good luck.
Thanks much I'll try this
When this happened to me i would
1: remove battery
2: insert battery
3: hold volume down and lock button at the same time
4: When the LG Logo pops up release the lock button for 1 second (while still holding the volume down button), then press down again
5: A data reset/restore menu appears, and when you choose to reset/restore, TWRP boots to recovery.
jared1992 said:
When this happened to me i would
1: remove battery
2: insert battery
3: hold volume down and lock button at the same time
4: When the LG Logo pops up release the lock button for 1 second (while still holding the volume down button), then press down again
5: A data reset/restore menu appears, and when you choose to reset/restore, TWRP boots to recovery.
Click to expand...
Click to collapse
I tried this also not working how did you fix it?
brozillatyler said:
I tried this also not working how did you fix it?
Click to expand...
Click to collapse
Hmm. That worked for me. I'm not sure what next.
help needed here, i was using a rooted stock image, and last night i saw the post about upgrading to MM:http://forum.xda-developers.com/g4/d...s-kdz-t3232282
but as i followed the instructions the device turned off before i flashed the system, so i installed boot modem and bootloader but couldnt get system installed and now it stays at the lg logo...with a burning led blink.
i tried using kdz file but i get a few errors,
1- connection to server failed. (i know move msg box but at 9% it completely stops)
rollback impossible saw this error
can someone help me with my lg h815 unlocked
i tryed hard reset i have acces but after the android guy . 1 seconde and that cut all .
i have not access at twrp anymore etc etc
is not the first time that i use flashtool . but here impossible to make something
i tryed to much solution . use 2.0 usb . use windows 10 and 7 by workstation . used different driver . if someone can help me bcz i try since 1 day . and impossible to make something
no one had this problem and found a solution?
So you can get into download mode?
R.Suave said:
So you can get into download mode?
Click to expand...
Click to collapse
i have the dowload mod but when i use it .. after 9% that ask me to remove the battery ... unplug etc etc . nothing work .. i tryed usb 2...usb 3 ... different windows ... different kdz files ... hard reset ... very all ...
I had a similar issue but was able to get into recovery mode and restore a backup.
Can you get to recovery like this
Power Down the LG G4
When Off, Press and Hold the Volume Down and Power Buttons at the Same Time
Continue Holding These Two Buttons Until You See the LG Logo
When You See the LG Logo, Let Go of the Volume Down and Power Buttons for 1 Second
After 1 Second has Passed, Immediately Start Holding the Power and Volume Down Buttons Again
Continue Holding These Two Buttons Until You Boot Up into the LG G4 Recovery Mode
Charles Collins said:
I had a similar issue but was able to get into recovery mode and restore a backup.
Can you get to recovery like this
Power Down the LG G4
When Off, Press and Hold the Volume Down and Power Buttons at the Same Time
Continue Holding These Two Buttons Until You See the LG Logo
When You See the LG Logo, Let Go of the Volume Down and Power Buttons for 1 Second
After 1 Second has Passed, Immediately Start Holding the Power and Volume Down Buttons Again
Continue Holding These Two Buttons Until You Boot Up into the LG G4 Recovery Mode
Click to expand...
Click to collapse
i told you nothing work i cant go in recovery mode with this option . and hard reset doesnt work too ... im blocked
Hi I'm sorry if you've already said you can't get into recovery mode or anything but when i bricked my g4 i used the lg flash tool to flash h815 10c stock and then instead of flashing the latest twrp (the blue themed one) i flashed the one before it which is 2.8.6.1 and it worked perfectly so if you manage to get into recovery or fastboot then try and flash that version of twrp instead , good luck buddy...
Xceeder said:
Hi I'm sorry if you've already said you can't get into recovery mode or anything but when i bricked my g4 i used the lg flash tool to flash h815 10c stock and then instead of flashing the latest twrp (the blue themed one) i flashed the one before it which is 2.8.6.1 and it worked perfectly so if you manage to get into recovery or fastboot then try and flash that version of twrp instead , good luck buddy...
Click to expand...
Click to collapse
yes maybe but trust me is not the first time i made flash . i flashe my phone since 7 years . first time i have this problem . i go in lgviet.com . and a lot of people have the same problem . i cant flash with the kdz method i have android 6.0 and for the moment the rollback its impossible
hi..pls look my video.!
my brick phone.. LG G4
Can you tell me what to do to restore it..??: I can not put it in download mode ....can someone help me. ??
confused:
https://www.youtube.com/watch?v=6CZSaG6h4rE&feature=youtu.be
alxioa said:
hi..pls look my video.!
my brick phone.. LG G4
Can you tell me what to do to restore it..??: I can not put it in download mode ....can someone help me. ??
confused:
https://www.youtube.com/watch?v=6CZSaG6h4rE&feature=youtu.be
Click to expand...
Click to collapse
How did you "brick" (it's not) it? Kill switch is an anti theft feature, usually triggered remotely by the user.
Charles Collins said:
I had a similar issue but was able to get into recovery mode and restore a backup.
Can you get to recovery like this
Power Down the LG G4
When Off, Press and Hold the Volume Down and Power Buttons at the Same Time
Continue Holding These Two Buttons Until You See the LG Logo
When You See the LG Logo, Let Go of the Volume Down and Power Buttons for 1 Second
After 1 Second has Passed, Immediately Start Holding the Power and Volume Down Buttons Again
Continue Holding These Two Buttons Until You Boot Up into the LG G4 Recovery Mode
Click to expand...
Click to collapse
This button combo you posted is wrong any way...you only release power for 1 sec and continue holding vol down and the re press power
I cut and pasted those instructions from another site. They held me back from fixing my phone for hours until I discovered the method you have mentioned. I haven't seen any site that tells us to do it like you said, I just was trying different ways and then hey presto!! it worked.
Charles Collins said:
I cut and pasted those instructions from another site. They held me back from fixing my phone for hours until I discovered the method you have mentioned. I haven't seen any site that tells us to do it like you said, I just was trying different ways and then hey presto!! it worked.
Click to expand...
Click to collapse
when you do this that doesnt work that work only if you let your finger on volume down and not on power 1 second and put again on power . you go in factory reset ... ys and yes and if you are luckily recovery mod
Hi all,
Have a brand new (to me) v500 that i bought and was able to root, flash twrp, and flash crdroid on yesterday. Today i flashed standard AOSP but now i'm stuck in a bootloop and cant figure out how to access twrp any more. Previously with crdroid on it i was accessing the bootloader/twrp via an app. So far all i can get to come up using hardware buttons is the download mode, and ADB isn't recognizing the device.
Any advice? I tried following a guide to revert to stock using the LG Support Tool but cant find the R&D tools to complete the tutorial.
Any help is appreciated.
Bump - $10 USD to whoever can help me solve this first
To enter twrp via buttons on v500:
Press and hold Power Button + Volume Down
When the LG logo shows up, release the power button only
Now press and hold the Power and Volume Up button while keeping your hold on the Volume Down button
When the factory reset screen appears, release your hold on all buttons
Follow On Screen Indications to make factory reset, but instead you enter twrp
Sent from my Pixel 3a using Tapatalk
---------- Post added at 12:58 PM ---------- Previous post was at 12:55 PM ----------
RUGGNATION said:
Hi all,
Have a brand new (to me) v500 that i bought and was able to root, flash twrp, and flash crdroid on yesterday. Today i flashed standard AOSP but now i'm stuck in a bootloop and cant figure out how to access twrp any more. Previously with crdroid on it i was accessing the bootloader/twrp via an app. So far all i can get to come up using hardware buttons is the download mode, and ADB isn't recognizing the device.
Any advice? I tried following a guide to revert to stock using the LG Support Tool but cant find the R&D tools to complete the tutorial.
Any help is appreciated.
Click to expand...
Click to collapse
To enter twrp via buttons on v500:
Press and hold Power Button + Volume Down
When the LG logo shows up, release the power button only
Now press and hold the Power and Volume Up button while keeping your hold on the Volume Down button
When the factory reset screen appears, release your hold on all buttons
Follow On Screen Indications to make factory reset, but instead you enter twrp
Sent from my Pixel 3a using Tapatalk
RUGGNATION said:
Hi all,
(---cut---) So far all i can get to come up using hardware buttons is the download mode, and ADB isn't recognizing the device.
Any advice? I tried following a guide to revert to stock using the LG Support Tool but cant find the R&D tools to complete the tutorial.
Any help is appreciated.
Click to expand...
Click to collapse
Have you tried LG Flash Tool 2014?
b0li said:
To enter twrp via buttons on v500:
Press and hold Power Button + Volume Down
When the LG logo shows up, release the power button only
Now press and hold the Power and Volume Up button while keeping your hold on the Volume Down button
When the factory reset screen appears, release your hold on all buttons
Follow On Screen Indications to make factory reset, but instead you enter twrp
Click to expand...
Click to collapse
Using that combination of buttons doesnt bring up any menus, i see the LG logo and then either holding the power button shuts down the tablet or it tries booting into Android, which then loops.
ze7zez said:
Have you tried LG Flash Tool 2014?
Click to expand...
Click to collapse
I did but ive been unable to get it to work and/or find the right file to load into it.
RUGGNATION said:
I did but ive been unable to get it to work and/or find the right file to load into it.
Click to expand...
Click to collapse
V50020f_00.kdz
Download LG Official Stock ROM / Firmware [U.S.]
or
Enter the serial number XXXXXXXXXXXXX into the link
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=LGXXXXXXXXXXXXX
and you will receive a link to the ROM.
ze7zez said:
V50020f_00.kdz
Download LG Official Stock ROM / Firmware [U.S.]
Click to expand...
Click to collapse
Thanks for the link, so far i havent been able to get my computer to recognize the usb connection when in download mode. I'm using the OEM cable and downloaded the drivers in the LG Flash Tool thread, but no luck.
RUGGNATION said:
Using that combination of buttons doesnt bring up any menus, i see the LG logo and then either holding the power button shuts down the tablet or it tries booting into Android, which then loops.
Click to expand...
Click to collapse
b0li gave an invalid TWRP entry instruction.
Read How to enter recovery mode using key combination post #2.
In TWRP, do advanced wipe without internal storage.
Before you flash the ROM, check its checksum carefully to see if it is identical to the one on the server.
ze7zez said:
b0li gave an invalid TWRP entry instruction.
Read How to enter recovery mode using key combination post #2.
Click to expand...
Click to collapse
I tried the corrected key combination, but no menus pop up, I either hold the power and vol up/down buttons until the device turns itself off, or it boots to the Android logo and then loops.
RUGGNATION said:
I tried the corrected key combination, but no menus pop up, I either hold the power and vol up/down buttons until the device turns itself off, or it boots to the Android logo and then loops.
Click to expand...
Click to collapse
It turns off because you hold 3 keys and don't release them.
You must press them simultaneously and then release them immediately.
ze7zez said:
It turns off because you hold 3 keys and don't release them.
You must press them simultaneously and then release them immediately.
Click to expand...
Click to collapse
That did the trick, can't believe it was just because i wasn't pressing the keys exactly right. I was able to get back into TWRP and reflash the ROM so now everything is working. Still having trouble getting usb to recognize the device, so i can't flash anything else on there at the moment.
PM me your paypal or venmo
RUGGNATION said:
Still having trouble getting usb to recognize the device, so i can't flash anything else on there at the moment.
Click to expand...
Click to collapse
Perhaps the problem is not the usb socket or cable.
Blow out the socket with compressed air and try again.
If that doesn't work, then your OS may be a problem.
In this case, try [LIVE-ISO][FWUL]adb/fastboot without any installation and driver issues.
I tried another computer too, same result - the tablet recognizes the connection so it starts charging, and despite the USB settings in dev options being set for MTP, it doesn't connect.
I'll try your link later, but it seems like its a problem with the tablet compared to computer.
RUGGNATION said:
I tried the corrected key combination, but no menus pop up, I either hold the power and vol up/down buttons until the device turns itself off, or it boots to the Android logo and then loops.
Click to expand...
Click to collapse
You can always transfer data using microSD or via WiFi tethering.
If via WiFi, I recommend the SwiFTP server - simple and reliable.
I tried to update Lineage and am running into an issue now where as soon as the LG logo pops up, a message that says "Secure booting error! Cause: boot certification verify" pops up almost immediately so I can't use the hardware buttons to get into TWRP. Any ideas around this one? Thanks again all!