I have a F400K G3 (Korean Olleh). It's rooted and bumped. I flashed the bumped TWRP image via Flashify and rebooted recovery via Flashify. It works. But when I try boot to recovery from a complete shutdown. It just boots into safe mode. I did exactly what was stated in the Bump thread (Power+V. Down, when logo appears, release then press again quickly) and also tried substituting V. Down button with V. Up, but it still wont boot to recovery. It just keeps going into safe mode. The video provided in the thread was using an AT&T model so maybe it differs from every variant. I want to know if I'm doing something wrong or the instructions are wrong.
Thank you.
You tried without releasing? Just keep holding buttons
---------- Post added at 11:38 AM ---------- Previous post was at 11:37 AM ----------
Do you get to that factory reset screen?
DelBoy said:
You tried without releasing? Just keep holding buttons
---------- Post added at 11:38 AM ---------- Previous post was at 11:37 AM ----------
Do you get to that factory reset screen?
Click to expand...
Click to collapse
I have tried it as well without releasing. Does the same thing. And it never shows the reset screen. It just goes directly to the boot animation. Rebooting from Flashify also doesn't show the reset screen but it does get to TWRP. But I need to boot it from complete shutdown because I'm gonna test a Flashable zip ROM without root so rebooting using Flashify would be impossible.
Bump.
Seriously. Anyone?
I am subscribing because I have the exact same problem. I have tried every key combination I could find for the G2 and G3 but no luck...
This is exactly the kind of problems you get when using stuff like Flashify. The holding of the buttons etc you mentioned should work. Are you sure you aren't connected using a micro usb?
sprremix said:
This is exactly the kind of problems you get when using stuff like Flashify. The holding of the buttons etc you mentioned should work. Are you sure you aren't connected using a micro usb?
Click to expand...
Click to collapse
No, I am not connected to USB. If I reflash the recovery using ADB will it work? But I do have some worries because I'm using KitKat bootloader on a Lollipop Stock-based ROM (here) and I think I may get some errors.
It's not very important right now because I have root now and can reboot to recovery using Flashify.
I think all korean models cant enter recovery via hardware keys, mine is F400L and have the same problem.
Untouched LG G3
I have a completely untouched LG G3 uk version only official software no root etc and mine won't go into hard reset mode. I have tried 3 or 4 times it always goes into safe mode
same issue
f400k.
able to boot into recovery by softwares
but unable with hard keys.
last night was installing bliss pop. but stuck on boot animation. now wont go to recovery watsoever.
help.
rhtash said:
f400k.
able to boot into recovery by softwares
but unable with hard keys.
last night was installing bliss pop. but stuck on boot animation. now wont go to recovery watsoever.
help.
Click to expand...
Click to collapse
Turn off the phone completely. Press and hold Power and Volume Down. When the LG logo appears, release. After a split second, press volume down and volume up. White screen asking you to reset will appear. Press Yes two times using Volume buttons.
UP!!!
Any remedies? I justed from stock to cm12 LG g3 F400L..
Cant go to recovery mode. Cant flash anything..
Same prob,always going to safemode.f400k rooted,cloudy2.5
i've Lg g3 F4ooL and using Resrruction remic 5.5.5
I stuck in a Bootloop and my device is also not booting into Recovery or safe Mode.
Lg flash Tool is also not Connecting to my device in Downloadmode.
I think There is NO solution At ALl
Has anyone solved this issue?
to get in recovery on F460s, worked on mine, Press Vol-up + Power, as the logo appears release the keys and press Vol-up + Vol-down, you will boot into recovery.
I have the same issue, cant go into recovery using hard buttons on F400K. Any one able to succeed in this?
Same issue on LG G3 F460S, no combination of power + volume buttons + releasing them and pressing again when LG logo appears works. The device go straight into booting system and gets stuck. Is there any other method - maybe short-circuit some pins on the motherboard, to boot into recovery or do a system reset? Please...
OK, turns out that the combination is different for Korean models of G3, as misbah711 wrote, volume UP + power, when logo appears, release and press both volume UP + volume DOWN. If that does not work, try again, but release only the POWER button and press immediately volume DOWN (while volume UP was held all the time). Also, I first tried it without the back cover, as I have to remove battery to turn it off, did not work. Then with the cover it did, not sure if it's an important detail or not.
However it's not the end of the story for me. An image with Korean text appears, and nothing. No combination of power and volume buttons pressing does anything. I'm attaching the image. Also tried a web service to do Korean OCR and then used Google Translate - does not make any sense. Could anyone advise how to proceed and do a factory reset on this device? It won't boot into the system (gets stuck), no adb or any other communication with it.
Edit:
Turns out that when the Korean text appears and I connect USB cable to my PC, adb works correctly. Typed:
adb reboot recovery
The phone rebooted into recovery and now I'm doing a factory reset on it. Looks like all will be fine.
i have d851 on stock kitkat. I flashed TWRP and Philz but no way i can get into recovery mode. it always goes to fastboot mode no matter how I reboot into recovery. Now i am looking for stock recovery image. or a way to fix the twrp/philz. ROM boots just fine.
Related
Hi I use a LG G3 and flashed a zip that was not designed for my phone (Validus-shamu-5.0.1.alpha.1.0-TEST-20141217-2151.zip) by a accident and rebooted, and now my phone has a black screen and the led is flashing red and blue (and said error: boot certification verify prior to that stage). How can I fix it?
Additional info: I was using the latest TWRP recovery, and own a d852 variant.
Any input would be appreciated! This is my only phone and I would like to resolve this as soon as I can.
UPDATE: i tried pressing power + up and now nothing reacts, even when i press other buttons. black screen. no LED.
UPDATE2: I removed the battery and put it back in, and now LED are back.
EDIT: FIXED. CLOSE THREAD PLEASE. got my solution from: "What you have to is power + vol down while off till you see the LG logo, then release then immediately press them again it should bring you to a factory reset screen select yes and you will boot into recovery." if people are interested.
I need help as well
droids4lyfe99 said:
Hi I use a LG G3 and flashed a zip that was not designed for my phone (Validus-shamu-5.0.1.alpha.1.0-TEST-20141217-2151.zip) by a accident and rebooted, and now my phone has a black screen and the led is flashing red and blue (and said error: boot certification verify prior to that stage). How can I fix it?
Additional info: I was using the latest TWRP recovery, and own a d852 variant.
Any input would be appreciated! This is my only phone and I would like to resolve this as soon as I can.
UPDATE: i tried pressing power + up and now nothing reacts, even when i press other buttons. black screen. no LED.
UPDATE2: I removed the battery and put it back in, and now LED are back.
EDIT: FIXED. CLOSE THREAD PLEASE. got my solution from: "What you have to is power + vol down while off till you see the LG logo, then release then immediately press them again it should bring you to a factory reset screen select yes and you will boot into recovery." if people are interested.
Click to expand...
Click to collapse
I tried to Flash twrp-2.8.0.0_d855-signed.img for TWRP Bootlader and got the same problem. Did i done some thing wrong pls I need an assist.
droids4lyfe99 said:
EDIT: FIXED. CLOSE THREAD PLEASE. got my solution from: "What you have to is power + vol down while off till you see the LG logo, then release then immediately press them again it should bring you to a factory reset screen select yes and you will boot into recovery." if people are interested.
Click to expand...
Click to collapse
Worked for me also! I just exited the factory reset menu and it booted up normally! Thanks for the help!
you're skating on very thin ice if you are flashing anything to your device that is not specifically for that model..
Cant fix the issue
Hello, i rooted a LG G3 D855, lollipop, installed flashify and then flashed twrp (last version) now i cant enter into recovery mode (red blue led blinks) i tried the factory reset without any results.
thanks
Download mode?
freddyjgv said:
Hello, i rooted a LG G3 D855, lollipop, installed flashify and then flashed twrp (last version) now i cant enter into recovery mode (red blue led blinks) i tried the factory reset without any results.
thanks
Click to expand...
Click to collapse
did you have tryed the DOWNLOAD MODE? take battery out, put usb cable on PC and on Phone, press VOL+ and untill you mantain VOL+ pressed, insert battery, download mode suposed to enter...:fingers-crossed:
if it works just reflash your firmware...
lazzarusbr said:
did you have tryed the DOWNLOAD MODE? take battery out, put usb cable on PC and on Phone, press VOL+ and untill you mantain VOL+ pressed, insert battery, download mode suposed to enter...:fingers-crossed:
if it works just reflash your firmware...
Click to expand...
Click to collapse
didnt tried but i want to get into recovery mode so i can full backup and flash cloudyg3
i have same problem on my d855 5.0 v20h.... i tried instal twrp but i cant boot into recovery mode.... system boot is fine, how can i solve this problem?? i dont wanna reflash firmware...
any solution?
linux_svk said:
i have same problem on my d855 5.0 v20h.... i tried instal twrp but i cant boot into recovery mode.... system boot is fine, how can i solve this problem?? i dont wanna reflash firmware...
Click to expand...
Click to collapse
Did you fix the issue?
linux_svk said:
i have same problem on my d855 5.0 v20h.... i tried instal twrp but i cant boot into recovery mode.... system boot is fine, how can i solve this problem?? i dont wanna reflash firmware...
Click to expand...
Click to collapse
You can use the NEW 1 CLICK script ROOT +TWRP . it Will install CORRECT files to do TWRP work in stock firmware and it will correct your problem! and at end you be with the newest version of TWRP! here: http://forum.xda-developers.com/lg-g3/general/d855-one-click-root-twrp-recovery-t3072767 :good:
lazzarusbr said:
yoy can use the NEW 1 CLICK script ROOT +TWRP . it Will install CORRECT files to do TWRP work in stock firmware and it will correct your problem! and at end you be with the newest version of TWRP! here: http://forum.xda-developers.com/lg-g3/general/d855-one-click-root-twrp-recovery-t3072767 :good:
Click to expand...
Click to collapse
it doesnt matter if i already have my phone rooted and with the red blue led issue??? thx
okey so im gonna try this http://forum.xda-developers.com/lg-g3/general/d855-one-click-root-twrp-recovery-t3072767
GUYS DO IT LIKE HERE http://forum.xda-developers.com/showpost.php?p=59931455&postcount=104
WORK PERFECT!!!
Hi,
droids4lyfe99 said:
Hi I use a LG G3 and flashed a zip that was not designed for my phone (Validus-shamu-5.0.1.alpha.1.0-TEST-20141217-2151.zip) by a accident and rebooted, and now my phone has a black screen and the led is flashing red and blue (and said error: boot certification verify prior to that stage). How can I fix it?
Additional info: I was using the latest TWRP recovery, and own a d852 variant.
Any input would be appreciated! This is my only phone and I would like to resolve this as soon as I can.
UPDATE: i tried pressing power + up and now nothing reacts, even when i press other buttons. black screen. no LED.
UPDATE2: I removed the battery and put it back in, and now LED are back.
EDIT: FIXED. CLOSE THREAD PLEASE. got my solution from: "What you have to is power + vol down while off till you see the LG logo, then release then immediately press them again it should bring you to a factory reset screen select yes and you will boot into recovery." if people are interested.
Click to expand...
Click to collapse
Any solutions yet?
Thank You lazzarusbr!
You Sir saved me a lot of reading
This method helped me get out from the red-blue blinking, black screen Recovery ****up. I believe I got into it because I should have flashed the TWRP using KitKat, but my device came with Lollipop installed....
---------- Post added at 04:38 PM ---------- Previous post was at 04:34 PM ----------
You Sir saved me a lot of reading !
This method helped me get out from the red-blue blinking, black screen Recovery ****up. I believe I got into it because I should have flashed the TWRP using KitKat, but my device came with Lollipop installed....
Had the same problem few minutes ago, then I just hold power button to reset the phone and it worked but I dont know if TWRP is installed now..?
did you try factory mode..
lazzarusbr said:
You can use the NEW 1 CLICK script ROOT +TWRP . it Will install CORRECT files to do TWRP work in stock firmware and it will correct your problem! and at end you be with the newest version of TWRP! here: http://forum.xda-developers.com/lg-g3/general/d855-one-click-root-twrp-recovery-t3072767 :good:
Click to expand...
Click to collapse
This saved the day for me! Thank you so much!!!!!
freddyjgv said:
it doesnt matter if i already have my phone rooted and with the red blue led issue??? thx
Click to expand...
Click to collapse
Mate, thank you a lot, you just saved my life.
I can't even express how thankful I am because my device almost got bricked and you just saved me. Thanks a lot !
It means not fully load.
Try to install the AUTORECAR in the Play Store.
Lol. The same thing happened to me on LG-D855. I flashed the TWRP recovery zip and new my phone is literally unusable. It doesn't boot into recovery or into anything else. Sigh.
Please help lg g 3 won't enter custom recovery I've tried all button variations
Please someone help I have a rooted g3 and don't wanna brick it?????
Go into an adb terminal and type in
Code:
adb reboot recovery[/quote]. If you don't have adb, search up minimal adb and fastboot, and how to use it.
Sent from my SM-N9100 using Tapatalk
On computer or phone?
Sent from my VS985 4G using XDA Free mobile app
And my phone already has twrp, just can't access it from device being off, but twrp app lets me go to recovery, just not when phone is off. So this should fix that right?
Sent from my VS985 4G using XDA Free mobile app
Please someone help
I've seen people are viewing this post if anyone know how to fix my problem please help or message me, the minimal adb won't work unless the device is turned on in usb. debugging, I can access my recovery with phone on easily but while it's powered off I should be able to get to custom recovery by pressing volume down and power while phone is off, but this method isn't working. So if I get in bootloop I can't get into custom recovery...please anyone any ideas
Well it should be as simple as holding down power and volume button down things but i guess you've already tried that method many times and it didnt work so you ask then, right?
If your phone in bootloop, you can flash tot files and it will back to stock re-root and re-install trwp.
If your phone still (or already) normal, you can download an app that can take you to custom recovery such as rebooter or power menu, thats it.
Yea phone isn't in bootloop, but if I put a Rom on phone I have no way to access the recovery because the volume and power won't take me to the recovery, so if it goes into bootloop I'm outta of luck I don't understand why the hardware buttons won't take me to the recovery, have you ever heard of this problem
brozillatyler said:
I've seen people are viewing this post if anyone know how to fix my problem please help or message me, the minimal adb won't work unless the device is turned on in usb. debugging, I can access my recovery with phone on easily but while it's powered off I should be able to get to custom recovery by pressing volume down and power while phone is off, but this method isn't working. So if I get in bootloop I can't get into custom recovery...please anyone any ideas
Click to expand...
Click to collapse
How long are you holding the vol down and power buttons? It should be around 15-20 seconds, then your system recovery screen comes up, you choose factory data reset, yes, and then TWRP comes up. If that isn't working - are you sure your buttons are working OK?
If the phone is turned off is there any other way to access it while phone is off?
Yes buttons work fine I hold it down and it just goes to Verizon screen ?
Actually when I hold it down it just stays on logo and reboots back to logo over and over and over
Actually I hold it down and it reboots to logo over and over its like there's no recovery there I don't understand lol
If anyone has any ideas or thoughts on how to fix this please let me know
brozillatyler said:
If anyone has any ideas or thoughts on how to fix this please let me know
Click to expand...
Click to collapse
OK... Does your phone boot into your ROM at all or are you bootlooped? If your phone boots, download an app called flashify and get the proper twrp .img file for your model and flash the image using flashify. It's an easy app to use - just make sure you're using the correct twrp .img for your phone...from here: http://forum.xda-developers.com/lg-g3/orig-development/recovery-twrp-touch-recovery-2-8-2-0-t2966129
If you are bootlooped I would suggest starting over and reflashing back to stock using the tot or kdz method. Here is a guide: http://forum.xda-developers.com/verizon-lg-g3/general/restore-verizon-to-stock-t2827878 I know it can be a pain to get the download tool working properly sometimes, so it may take some effort to get it working, but be patient (and read a lot if you get stuck) and you will get it working.
I don't know how you got borked...maybe it was an un-bumped twrp image? Either way, it is what it is, just try not to do it again Good luck.
Thanks much I'll try this
When this happened to me i would
1: remove battery
2: insert battery
3: hold volume down and lock button at the same time
4: When the LG Logo pops up release the lock button for 1 second (while still holding the volume down button), then press down again
5: A data reset/restore menu appears, and when you choose to reset/restore, TWRP boots to recovery.
jared1992 said:
When this happened to me i would
1: remove battery
2: insert battery
3: hold volume down and lock button at the same time
4: When the LG Logo pops up release the lock button for 1 second (while still holding the volume down button), then press down again
5: A data reset/restore menu appears, and when you choose to reset/restore, TWRP boots to recovery.
Click to expand...
Click to collapse
I tried this also not working how did you fix it?
brozillatyler said:
I tried this also not working how did you fix it?
Click to expand...
Click to collapse
Hmm. That worked for me. I'm not sure what next.
Right out of the RetailBox (with stockRom) I couldn't reboot into recovery using the "VolumeUp+Home+PowerButton" step...
Even now after installing a custom rom and twrp recovery I can't do the hardbutton action ("VolumeUp+Home+PowerButton") to get into the "recovery"
so whats the hiccup here? someone plz
thx
Samsung Galaxy Tab S 10.5
IronRom V2.3.5 (lollipop 5.0.x)
odin 3.0.5
drei??? said:
Right out of the box I couldn't reboot into recovery using the Volume up + home + PowerButton...
I just flashed a root... and then downloaded twrp through playstore and always rebooted with Newstart chosing reboot into recovery.... so it was fine till now..
now though, after installing IronRom .zip through twrp, it won't reboot anymore, it is stuck at the "Samsung Galaxy Tab S powered by android" starting screen.
Now I want to simply to the hardbutton reboot into recovery step, since i cant access it otherwise... but it doesn't react.
so whats the hiccup here?
thx
Click to expand...
Click to collapse
I would also like to know this, I recently installed the PAC-MAN (unofficial) rom and things went weird. I tried to flash official Samsung ROM through Odin, things went well but got stuck in Samsung booting logo (not the one that says powered by Samsung). The logo that comes after the Samsung jingle.
drei??? said:
Right out of the RetailBox (with stockRom) I couldn't reboot into recovery using the "VolumeUp+Home+PowerButton" step...
Even now after installing a custom rom and twrp recovery I can't do the hardbutton action ("VolumeUp+Home+PowerButton") to get into the "recovery"
so whats the hiccup here? someone plz
thx
Samsung Galaxy Tab S 10.5
IronRom V2.3.5 (lollipop 5.0.x)
odin 3.0.5
Click to expand...
Click to collapse
Pilot error.
Use reboot from play.
https://play.google.com/store/apps/...etrus&pcampaignid=APPU_1_ogS1Vd-JO4GfUsyfu7gM
---------- Post added at 05:09 PM ---------- Previous post was at 04:57 PM ----------
pooranimator said:
I would also like to know this, I recently installed the PAC-MAN (unofficial) rom and things went weird. I tried to flash official Samsung ROM through Odin, things went well but got stuck in Samsung booting logo (not the one that says powered by Samsung). The logo that comes after the Samsung jingle.
Click to expand...
Click to collapse
It takes 10 mins first boot to lollipop.
ashyx said:
Pilot error.
Use reboot from play.
Click to expand...
Click to collapse
So there is no way to get the HardButton way to work?
(My customRom already has multiple shutdown and restart option... thats how i've been operating.)
But once one is stuck somewhere and can't get to the system level (like boot loop or whatnot) it would be great to enter the recovery anyway... thx
drei??? said:
So there is no way to get the HardButton way to work?
(My customRom already has multiple shutdown and restart option... thats how i've been operating.)
But once one is stuck somewhere and can't get to the system level (like boot loop or whatnot) it would be great to enter the recovery anyway... thx
Click to expand...
Click to collapse
You can enter recovery any time you want, you just need to do it right.
Hold POWER + HOME + VOL DOWN until the screen goes blank then immediately change to VOL UP whilst still holding the other buttons until recovery boots.
ashyx said:
You can enter recovery any time you want, you just need to do it right.
Hold POWER + HOME + VOL DOWN until the screen goes blank then immediately change to VOL UP whilst still holding the other buttons until recovery boots.
Click to expand...
Click to collapse
Holy Damn... thanks a lot!!!! that was really bugging me. I never found anything apart from just holding home+power+volumeup
I just tried this after trying other button combinations found on the web to try to get it to hard reset but nothing happens with my Tab S...it still stays stuck on the Samsung Galaxy Tab S startup screen. Any suggestions as to why that is?
ashyx said:
You can enter recovery any time you want, you just need to do it right.
Hold POWER + HOME + VOL DOWN until the screen goes blank then immediately change to VOL UP whilst still holding the other buttons until recovery boots.
Click to expand...
Click to collapse
ashyx said:
You can enter recovery any time you want, you just need to do it right.
Hold POWER + HOME + VOL DOWN until the screen goes blank then immediately change to VOL UP whilst still holding the other buttons until recovery boots.
Click to expand...
Click to collapse
Just signed in to say thanks for this, but for some reason I had to do it slightly differently. I was on stock 5.0.2 and trying to boot into recovery (Power+Volume UP+Home would start Samsung splash screens and then go black without ever booting into Recovery) so my solution was:
Shutdown Tab S, then hold down Power+Volume DOWN+Home (as though to get into Download mode) and then immediately after pressing that initially, I pressed Volume UP while still holding Power+Home.
Problem solved.
samgals said:
Just signed in to say thanks for this, but for some reason I had to do it slightly differently. I was on stock 5.0.2 and trying to boot into recovery (Power+Volume UP+Home would start Samsung splash screens and then go black without ever booting into Recovery) so my solution was:
Shutdown Tab S, then hold down Power+Volume DOWN+Home (as though to get into Download mode) and then immediately after pressing that initially, I pressed Volume UP while still holding Power+Home.
Problem solved.
Click to expand...
Click to collapse
Yours worked for me perfect
ashyx said:
You can enter recovery any time you want, you just need to do it right.
Hold POWER + HOME + VOL DOWN until the screen goes blank then immediately change to VOL UP whilst still holding the other buttons until recovery boots.
Click to expand...
Click to collapse
wooow it really works thank
ashyx said:
Pilot error.
Use reboot from play.
htt ps://play.google.com/store/apps/details?id=fr.petrus.tools.reboot&hl=en_GB&referrer=utm_source%3Dgoogle%26utm_medium%3Dorganic%26utm_term%3Dgoogle+play+reboot+petrus&pcampaignid=APPU_1_ogS1Vd-JO4GfUsyfu7gM[/url]
---------- Post added at 05:09 PM ---------- Previous post was at 04:57 PM ----------
It takes 10 mins first boot to lollipop.
Click to expand...
Click to collapse
Someone please help me! I downloaded the apk above, chose "Boot into Recovery", gave it root, but it just took me to the "Downloading Do not turn off target!" screen & pressing Home + Power + Volume Down doesn't fix it! I'm using a Galaxy Tab S 10.5 SM-T800, stock Lollipop 5.0.2 and I used the combined TWRP & CF-Auto_root package on XDA to root it. Is all hope lost?
bokusen said:
Someone please help me! I downloaded the apk above, chose "Boot into Recovery", gave it root, but it just took me to the "Downloading Do not turn off target!" screen & pressing Home + Power + Volume Down doesn't fix it! I'm using a Galaxy Tab S 10.5 SM-T800, stock Lollipop 5.0.2 and I used the combined TWRP & CF-Auto_root package on XDA to root it. Is all hope lost?
Click to expand...
Click to collapse
Just do this:
ashyx; said:
Hold POWER + HOME + VOL DOWN until the screen goes blank then immediately change to VOL UP whilst still holding the other buttons until recovery boots.
Click to expand...
Click to collapse
Wow. Thanks! Didn't see that anywhere else...
None of these work for me so...I have a feeling for whatever reason I locked myself out of recovery. Yet to try adb recovery but have little hope.
podlinux said:
I have a feeling for whatever reason I locked myself out of recovery.
Click to expand...
Click to collapse
Not possible, purely pilot error.
Well adb recovery to my surprise and happiness worked! The only thing that worked for me.
I have a tab s that failed an upgrade, I have wiped the cache, and the system but it still will not start up.
Any suggestions?
Ghostwolf01 said:
I have a tab s that failed an upgrade, I have wiped the cache, and the system but it still will not start up.
Any suggestions?
Click to expand...
Click to collapse
Reinstall the firmware via ODIN
My j3 emerge says error..invalid boot loop image header can't get fed download mode help please
When and how was this method introduced?
It worked, so many thanks.
Just a bit convoluted... issh...
Is it a twrp thing? Almost a bit like a GitarChord
very thanksful it worked though
Soo.... I messed up and edited the build.prop specificly the ro.build.type property. I tried to enable some debug options without validating if this would be a good idea (hint: it's not).
It seems that this has bricked my phone, the first LG splash screen shows up with the powered by android, and the second animation just keeps loading forever (making the phone very hot). And the LED flashes blue continously.
I did manage to get the device visible in ADB but it tells me that the device is offline so I can't do anything with it.
Tried booting in recovery mode (holding power button + volume down) but it just own't go into recovery mode.
Some extra info of what runs on my phone:
- version H815
- Android 6.0
- bootloader unlocked
- TWRP installed
- Rooted
- XPosed installed
Any idea on what I could try to fix it? (I guess stuck with a brick but oh well).
Thanks!
What do you mean, by it can't go into recovery mode?
Nothing is showing on screen?
Go to downlod mode either use lgup or lg flashtool to reflash the firmware that you are on... Do u remember which firmware you were on ?
Thanks for the replies!
Vortuks said:
What do you mean, by it can't go into recovery mode?
Nothing is showing on screen?
Click to expand...
Click to collapse
I meant that it just boots 'normally' when I press those buttons, it shows me the first LG logo and the second animation just hangs, whatever I do. I tried all sorts of combinations with the power button + volume down. (Keeping it pressed, briefly letting it go after the lg logo and repressing them).
jinderation said:
Go to downlod mode either use lgup or lg flashtool to reflash the firmware that you are on... Do u remember which firmware you were on ?
Click to expand...
Click to collapse
I don't know exactly which firmware I was on but I can't even get my phone into download mode (same as my other response, pressing volume up doesn't do anything).
The recovery and download mode used to work but I have no idea why it doesn't now...
When booting the phone, hold the power button and volume down button simultaneously, when LG logo appear, push the power button again. You should see the white screen, where you choose "YES" twice. Then the phone should kick you into TWRP or different recovery mode.
But how the hell editing build.prop can mess with recovery and download mode? Sounds incredible
Vortuks said:
But how the hell editing build.prop can mess with recovery and download mode? Sounds incredible
Click to expand...
Click to collapse
Maybe he has bootloop issue... ILAPO
Yeah I have no idea why the buttons aren't working for me. After a lot of searching I found this thread:
http://forum.xda-developers.com/g4/help/soft-bricked-device-t3248144
Which is basicly the same thing I'm experiencing, ADB comes online for just a brief second (kept spamming the reboot recovery command) and got in TWRP and I just flashed another which worked fine.
Odd thing is, even now my phone works I can't start recovery or download with the hardware buttons...... oh well, thankfully adb works as it's supposed to.
Thank you all for your help!
Hi all,
Have a brand new (to me) v500 that i bought and was able to root, flash twrp, and flash crdroid on yesterday. Today i flashed standard AOSP but now i'm stuck in a bootloop and cant figure out how to access twrp any more. Previously with crdroid on it i was accessing the bootloader/twrp via an app. So far all i can get to come up using hardware buttons is the download mode, and ADB isn't recognizing the device.
Any advice? I tried following a guide to revert to stock using the LG Support Tool but cant find the R&D tools to complete the tutorial.
Any help is appreciated.
Bump - $10 USD to whoever can help me solve this first
To enter twrp via buttons on v500:
Press and hold Power Button + Volume Down
When the LG logo shows up, release the power button only
Now press and hold the Power and Volume Up button while keeping your hold on the Volume Down button
When the factory reset screen appears, release your hold on all buttons
Follow On Screen Indications to make factory reset, but instead you enter twrp
Sent from my Pixel 3a using Tapatalk
---------- Post added at 12:58 PM ---------- Previous post was at 12:55 PM ----------
RUGGNATION said:
Hi all,
Have a brand new (to me) v500 that i bought and was able to root, flash twrp, and flash crdroid on yesterday. Today i flashed standard AOSP but now i'm stuck in a bootloop and cant figure out how to access twrp any more. Previously with crdroid on it i was accessing the bootloader/twrp via an app. So far all i can get to come up using hardware buttons is the download mode, and ADB isn't recognizing the device.
Any advice? I tried following a guide to revert to stock using the LG Support Tool but cant find the R&D tools to complete the tutorial.
Any help is appreciated.
Click to expand...
Click to collapse
To enter twrp via buttons on v500:
Press and hold Power Button + Volume Down
When the LG logo shows up, release the power button only
Now press and hold the Power and Volume Up button while keeping your hold on the Volume Down button
When the factory reset screen appears, release your hold on all buttons
Follow On Screen Indications to make factory reset, but instead you enter twrp
Sent from my Pixel 3a using Tapatalk
RUGGNATION said:
Hi all,
(---cut---) So far all i can get to come up using hardware buttons is the download mode, and ADB isn't recognizing the device.
Any advice? I tried following a guide to revert to stock using the LG Support Tool but cant find the R&D tools to complete the tutorial.
Any help is appreciated.
Click to expand...
Click to collapse
Have you tried LG Flash Tool 2014?
b0li said:
To enter twrp via buttons on v500:
Press and hold Power Button + Volume Down
When the LG logo shows up, release the power button only
Now press and hold the Power and Volume Up button while keeping your hold on the Volume Down button
When the factory reset screen appears, release your hold on all buttons
Follow On Screen Indications to make factory reset, but instead you enter twrp
Click to expand...
Click to collapse
Using that combination of buttons doesnt bring up any menus, i see the LG logo and then either holding the power button shuts down the tablet or it tries booting into Android, which then loops.
ze7zez said:
Have you tried LG Flash Tool 2014?
Click to expand...
Click to collapse
I did but ive been unable to get it to work and/or find the right file to load into it.
RUGGNATION said:
I did but ive been unable to get it to work and/or find the right file to load into it.
Click to expand...
Click to collapse
V50020f_00.kdz
Download LG Official Stock ROM / Firmware [U.S.]
or
Enter the serial number XXXXXXXXXXXXX into the link
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=LGXXXXXXXXXXXXX
and you will receive a link to the ROM.
ze7zez said:
V50020f_00.kdz
Download LG Official Stock ROM / Firmware [U.S.]
Click to expand...
Click to collapse
Thanks for the link, so far i havent been able to get my computer to recognize the usb connection when in download mode. I'm using the OEM cable and downloaded the drivers in the LG Flash Tool thread, but no luck.
RUGGNATION said:
Using that combination of buttons doesnt bring up any menus, i see the LG logo and then either holding the power button shuts down the tablet or it tries booting into Android, which then loops.
Click to expand...
Click to collapse
b0li gave an invalid TWRP entry instruction.
Read How to enter recovery mode using key combination post #2.
In TWRP, do advanced wipe without internal storage.
Before you flash the ROM, check its checksum carefully to see if it is identical to the one on the server.
ze7zez said:
b0li gave an invalid TWRP entry instruction.
Read How to enter recovery mode using key combination post #2.
Click to expand...
Click to collapse
I tried the corrected key combination, but no menus pop up, I either hold the power and vol up/down buttons until the device turns itself off, or it boots to the Android logo and then loops.
RUGGNATION said:
I tried the corrected key combination, but no menus pop up, I either hold the power and vol up/down buttons until the device turns itself off, or it boots to the Android logo and then loops.
Click to expand...
Click to collapse
It turns off because you hold 3 keys and don't release them.
You must press them simultaneously and then release them immediately.
ze7zez said:
It turns off because you hold 3 keys and don't release them.
You must press them simultaneously and then release them immediately.
Click to expand...
Click to collapse
That did the trick, can't believe it was just because i wasn't pressing the keys exactly right. I was able to get back into TWRP and reflash the ROM so now everything is working. Still having trouble getting usb to recognize the device, so i can't flash anything else on there at the moment.
PM me your paypal or venmo
RUGGNATION said:
Still having trouble getting usb to recognize the device, so i can't flash anything else on there at the moment.
Click to expand...
Click to collapse
Perhaps the problem is not the usb socket or cable.
Blow out the socket with compressed air and try again.
If that doesn't work, then your OS may be a problem.
In this case, try [LIVE-ISO][FWUL]adb/fastboot without any installation and driver issues.
I tried another computer too, same result - the tablet recognizes the connection so it starts charging, and despite the USB settings in dev options being set for MTP, it doesn't connect.
I'll try your link later, but it seems like its a problem with the tablet compared to computer.
RUGGNATION said:
I tried the corrected key combination, but no menus pop up, I either hold the power and vol up/down buttons until the device turns itself off, or it boots to the Android logo and then loops.
Click to expand...
Click to collapse
You can always transfer data using microSD or via WiFi tethering.
If via WiFi, I recommend the SwiFTP server - simple and reliable.
I tried to update Lineage and am running into an issue now where as soon as the LG logo pops up, a message that says "Secure booting error! Cause: boot certification verify" pops up almost immediately so I can't use the hardware buttons to get into TWRP. Any ideas around this one? Thanks again all!