Develop Bugs

[Q] Is my GPad bricked ?

Hello guys,
I am experiencing a hard issue with my GPad. I have the V500 model (bought in France), I have unlocked it, and rooted it (everything was fine).
I decided to install CM ROM, so I have installed TWRP using the loki method, booted in recovery, formatted everything except the external SD card (the CM ROM zip file was in it).
The installation of the CM ROM failed, it showed an error. So I decided to reboot the tablet but I am now stuck on the LG logo, nothing boots. When I decide to enter Recovery mode (without USB cable plugged), it shows the screen OpenRecoveryScript, and then the tablet restarts. I can't access the main menu (see pic 1).
The only thing I have managed to do is to access the tablet via ADB. Unfortunately I don't seem to have root access...and it shows an error message (see pic 2)
I have tried lots of things these past 2 days to try and restore the system but I feel really lost now !! :crying:
Would you mind helping me with my issue ?
Thank you very much in advance!

Follow the instructions in this thread to flash the stock ROM. The only difference is that the button sequence to enter Download Mode on the G Pad is to hold volume up and volume down (not just volume up) while plugging in the USB cable.

First off you didn't read. Second off you have the wrong recovery version installed. You need 2.6.3.1 to flash CM

Thank you coleam, I will try this method and give you an update!
Hope it'll work..!

same problem
comarinho said:
Thank you coleam, I will try this method and give you an update!
Hope it'll work..!
Click to expand...
Click to collapse
Hello, sorry for my stupid question but I feel lost:
I did the same you did, tried to install cm 11 but it showed me an error, so I rebooted...
Now It shows me LG logo's but I don't know how to enter in recovery mode, how did you do? thanks for helping

Nicolò98 said:
Hello, sorry for my stupid question but I feel lost:
I did the same you did, tried to install cm 11 but it showed me an error, so I rebooted...
Now It shows me LG logo's but I don't know how to enter in recovery mode, how did you do? thanks for helping
Click to expand...
Click to collapse
I met the question before, I resolved the question with guide in this bbs, But i can't find the thread again, So I write it with my poor english. Wish this can help you.
1. Press the volume down+power button
2. when you see the LG logo, relaese the power button,(Don't relaese the volume down button)
3. Press Volume up and power button immediately (Now, you press those three buttons, the volume down,volume up and power)
4. Wait a while, you can see the recovery mode.

Jack Zheng said:
I met the question before, I resolved the question with guide in this bbs, But i can't find the thread again, So I write it with my poor english. Wish this can help you.
1. Press the volume down+power button
2. when you see the LG logo, relaese the power button,(Don't relaese the volume down button)
3. Press Volume up and power button immediately (Now, you press those three buttons, the volume down,volume up and power)
4. Wait a while, you can see the recovery mode.
Click to expand...
Click to collapse
Thanks a lot, It works!

coleam said:
Follow the instructions in this thread to flash the stock ROM. The only difference is that the button sequence to enter Download Mode on the G Pad is to hold volume up and volume down (not just volume up) while plugging in the USB cable.
Click to expand...
Click to collapse
Thank you so much coleam, I've been able to restore the tablet and install CM ! :good:

[Q] Acidentally Wiped System, What can I do?

I accidentally formatted the system partition so the tablet will not boot. I can't get back in to TWRP, I didn't have anything to flash in there anyway because CM would fail. What can I do?
Thank you.

You could try the LG mobile support tool

techrider6262 said:
You could try the LG mobile support tool
Click to expand...
Click to collapse
I think you have to pay to use it.

No its free just go the the website and download it.You can downloaded it from the link in this post.
http://forum.xda-developers.com/showthread.php?t=2543350

Can you write to it in ADB? How far does it come when it tries to boot? just LG bootloop? And what edition of TWRP did you use to flash?

CuraeL said:
Can you write to it in ADB? How far does it come when it tries to boot? just LG bootloop? And what edition of TWRP did you use to flash?
Click to expand...
Click to collapse
I realize why it didn't flash. Because I was using an older version of TWRP that wouldn't flash AOSP roms. Is there any way to boot to recovery from the device being off?
The method in the link doesn't seem to work anymore.

How far do you get in the boot? LG screen? When connect to PC do you get connect/disconnect sounds? Please answer the questions as I'm thinking about this. I can't find any key combos so we need to find out if we have a small window where we can talk to ADB.. Any connection sounds? How far do you get?
Are you familiar with ADB and Fastboot?

CuraeL said:
How far do you get in the boot? LG screen? When connect to PC do you get connect/disconnect sounds? Please answer the questions as I'm thinking about this. I can't find any key combos so we need to find out if we have a small window where we can talk to ADB.. Any connection sounds? How far do you get?
Are you familiar with ADB and Fastboot?
Click to expand...
Click to collapse
I don't hear any sounds. It just stays at the LG screen. I made it to the factory reset screen but it didn't do anything. I followed these steps:
Make sure your device is fully charged and turned off.
Simultaneously press and hold the power and volume down buttons.
When the LG logo shows up, release the power button only.
Now press and hold the power and volume up button while keeping your hold on the volume down button.
When the factory reset screen appears, release your hold on all buttons.
Press the power button to continue.
Press the power button again to confirm if you’re sure you wish to continue with the reset.
Click to expand...
Click to collapse
ADB doesn't work at the LG screen, I just get the error: device not found message.
I can just send it back but I'd prefer to get it working.
Thanks

skatingrocker17 said:
I don't hear any sounds. It just stays at the LG screen. I made it to the factory reset screen but it didn't do anything. I followed these steps:
ADB doesn't work at the LG screen, I just get the error: device not found message.
I can just send it back but I'd prefer to get it working.
Thanks
Click to expand...
Click to collapse
Okay, okay, I dunno what you can do maybe ADB Works in here: Turn off the device AND disconnect from PC. When shut Down, you DONT hold power, but hold Volume up + Volume Down, when you hold both, you plug in USB cable. This takes you to download mode. That is perhaps a step in the right direction if you can start ADB from download mode. Then you can boot into recovery. But I don't know. This is maybe the last option for you. No recovery key combo has been discovered yet. If you can do a fastboot boot recovery from download mode, that would be golden. Then you can use the SD Card to get back with the newest TWRP and the CM11 nightly. Please let me know if this Works man. I'm sorry for your loss, otherwise. Factory Reset, as you said, will not work, since there's nothing to "restore" from. You deleted it. :/

Unfortunately, ADB doesn't work in download mode.

skatingrocker17 said:
Unfortunately, ADB doesn't work in download mode.
Click to expand...
Click to collapse
Were you able to download the LG tool?

skatingrocker17 said:
Unfortunately, ADB doesn't work in download mode.
Click to expand...
Click to collapse
Damn that sucks. I was looking around the G2 forums to see about download mode and what LG usually did with it. Apparently they are using something called KDZ files, and they are able to flash stock roms back onto the device with something called FlashTool. Now, if it were my tablet and it was in the state yours is, I would try and read the tutorial. And then I'd follow it step by step but instead of the G2 KDZ, I'd see if I could find a KDZ with a G Pad rom instead. And just.. Yolo that ****.. From download mode.
Here's the thread, if you wanna read it.. http://forum.xda-developers.com/showthread.php?t=2432476. I dunno man. The LG Tool thing, maybe you should try and see what techrider6262 is saying, he might have an idea as well, otherwise, just go all out crazy and see if you can magically use the FlashTool on your G Pad instead of the G2, since they are from "same line up." I know that's not the same as same model and so on.. But still.. Download mode.. Is download mode. Ofc. the tool itself or the settings in the tool might not work.. But.. You know. Why not.. Can't hurt.. Download mode will prolly still be available afterwards.. "For science."

got the same problem. i couldnt i wiped all data on the tablet and couldnt select the rom from the ext.sd. now its stuck at the lg logo.

skatingrocker17 said:
Unfortunately, ADB doesn't work in download mode.
Click to expand...
Click to collapse
blazze11 said:
got the same problem. i couldnt i wiped all data on the tablet and couldnt select the rom from the ext.sd. now its stuck at the lg logo.
Click to expand...
Click to collapse
This guys.. Is for download mode fix. I am pretty sure this works. Since you have access to Dload mode. Good luck.
I use the download mode to install the original official rom.
1. Download the LG MOBILE SUPPORT TOOL by this link:http://www.lg.com/us/support-mobile/lg-V500-White
2. install the software in computer, Plug in USB cable with computer, Open the software LG MOBILE SUPPORT TOOL.
3. Turn off Pad and unplug.
4. press hold both volume up and volume down, Then plug in usb cable, And then pad is in downlaod mode
5. USB driver will be insatlled automatically
6. In LG MOBILE SUPPORT TOOL, click option---.country and language-OK, then click option--upgrade recovery
7. It will installe original official rom automatically.
8. After about 1.5 hours, The pad will be installed the last official room.
^ This is a quote and now I shut down the thread, sorry, don't know who said it, just got stoked when I saw it.

thanks, the tool is downloading the rom. hope its works.
// it worked thanks a lot, will try to flash cm 11 tomorrow again.

blazze11 said:
thanks, the tool is downloading the rom. hope its works.
// it worked thanks a lot, will try to flash cm 11 tomorrow again.
Click to expand...
Click to collapse
That is GREAT!
Now remember mate, clear DATA in TWPR, not system.. Never system. Clear only data/factory reset, then just flash CM 11. Nothing else is needed. Remember to install superSU from market after you get booted, otherwise root will not work. Update Binary in SuperSU.

Okay thanks for your help. Its so stupid that there is no key combination for recovery.
I will use your advice and try it later.

blazze11 said:
Okay thanks for your help. Its so stupid that there is no key combination for recovery.
I will use your advice and try it later.
Click to expand...
Click to collapse
Agreed.

blazze11 said:
Okay thanks for your help. Its so stupid that there is no key combination for recovery.
I will use your advice and try it later.
Click to expand...
Click to collapse
There is...
With device powered off do this...
Hold volume key down and press and hold power button.
When LG Logo appears let go of just the power key while still holding the volume key down and then press power key again and volume up while still holding down the volume key.
You get to the factory reset screen and just keep pressing power until you get into recovery.

AndroidUser00110001 said:
There is...
With device powered off do this...
Hold volume key down and press and hold power button.
When LG Logo appears let go of just the power key while still holding the volume key down and then press power key again and volume up while still holding down the volume key.
You get to the factory reset screen and just keep pressing power until you get into recovery.
Click to expand...
Click to collapse
Okay, i will try it next time. Everything is working right now.
Thanks

Stock, can't get into recovery/download modes

Hi guys. Im pretty experienced with android but this one has me stumped. My buddies brother has a stock/non-rooted optimus g e971 on Rogers. He changed his screen lock password and forgot what it is. Of course he never register a Gmail account so I can't recover that way. I figure no problem. Shut down, pwr+vol down to factory reset. Well nope doesn't work. It flashes the lg logo twice then boots like normal.
Ok so I figure I'll just put it in download mode/fast boot to do the factory reset. Tried pwr+vol up. Nope. Vol up+vol down+pwr. Nope. Vol up+vol down and plug usb+pwr. Nope. It just flashed the lg logo twice then boots like normal. I've tried multiple variations of each holding the pwr for different lengths of time, always with the same result.
Anyone have any suggestions? It's not bricked, and the vol keys are working, it just won't go into any modes.

also I dont know if he has hardware encryption enabled (of if thats even an option on this device) but would that even prevent me from getting into factory reset / download mode?
Also I check that the vol rocker is working. when it is on but screen is off, if i click the vol rocker either way it wakes the screen.

I have a similar problem.Here's a thread I made about it http://forum.xda-developers.com/optimus-g-intl/help/enter-download-mode-t2883542.A couple of guys had some ideas.None worked in my phone but maybe you're luckier.
If you haven't done that already you should try going into download mode by pressing power up+down and plug the cable, don't press the pwr button.
If you find a solution pls let me know .

Yup, you shouldn't need to press the power button for download mode.
First, make sure you have the LG United Mobile drivers installed on the PC you're using. Then plug your USB cable into the PC (not the phone yet). Simultaneously press and hold the Vol +/- buttons, and hold for 10 seconds. Then while still holding the vol buttons, connect the micro usb to the phone.
Drivers:
http://tool.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00120120425

sir Impecable said:
I have a similar problem.Here's a thread I made about it http://forum.xda-developers.com/optimus-g-intl/help/enter-download-mode-t2883542.A couple of guys had some ideas.None worked in my phone but maybe you're luckier.
If you haven't done that already you should try going into download mode by pressing power up+down and plug the cable, don't press the pwr button.
If you find a solution pls let me know .
Click to expand...
Click to collapse
I can't get into download mode using that method. It just boots like normal.

ff_29 said:
Yup, you shouldn't need to press the power button for download mode.
First, make sure you have the LG United Mobile drivers installed on the PC you're using. Then plug your USB cable into the PC (not the phone yet). Simultaneously press and hold the Vol +/- buttons, and hold for 10 seconds. Then while still holding the vol buttons, connect the micro usb to the phone.
Drivers:
http://tool.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00120120425
Click to expand...
Click to collapse
Doesn't work either. If I hold +/- for 10 sec then plug in the usb it flashes the lg logo twice, then goes to the battery charging screen. If I hold +/- for 20 sec then plug in the usb it flashes the lg logo twice then boots like normal.

after reading this post i went and tried if i also cant get into the recovery and the same happened to me, the LG logo just flashes and nothing happens. mine is stock E975 (4.4.2).

worked for me.
burnski said:
Hi guys. Im pretty experienced with android but this one has me stumped. My buddies brother has a stock/non-rooted optimus g e971 on Rogers. He changed his screen lock password and forgot what it is. Of course he never register a Gmail account so I can't recover that way. I figure no problem. Shut down, pwr+vol down to factory reset. Well nope doesn't work. It flashes the lg logo twice then boots like normal.
Ok so I figure I'll just put it in download mode/fast boot to do the factory reset. Tried pwr+vol up. Nope. Vol up+vol down+pwr. Nope. Vol up+vol down and plug usb+pwr. Nope. It just flashed the lg logo twice then boots like normal. I've tried multiple variations of each holding the pwr for different lengths of time, always with the same result.
Anyone have any suggestions? It's not bricked, and the vol keys are working, it just won't go into any modes.
Click to expand...
Click to collapse
i also have a stock 4.4.2 E975 and i also cant go to the recovery, but i happened to have found this video on youtube, it worked for me :victory:
he pressed again the power and volume down button simultaneously after the LG logo appeared.
https://www.youtube.com/watch?v=24Zq047J60c

ff_29 said:
Yup, you shouldn't need to press the power button for download mode.
First, make sure you have the LG United Mobile drivers installed on the PC you're using. Then plug your USB cable into the PC (not the phone yet). Simultaneously press and hold the Vol +/- buttons, and hold for 10 seconds. Then while still holding the vol buttons, connect the micro usb to the phone.
Drivers:
http://tool.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00120120425
Click to expand...
Click to collapse
j4yd3n said:
i also have a stock 4.4.2 E975 and i also cant go to the recovery, but i happened to have found this video on youtube, it worked for me :victory:
he pressed again the power and volume down button simultaneously after the LG logo appeared.
https://www.youtube.com/watch?v=24Zq047J60c
Click to expand...
Click to collapse
Still nothing. Did exactly the same thing, tried a dozen times, just boots like normal.

burnski said:
also I dont know if he has hardware encryption enabled (of if thats even an option on this device) but would that even prevent me from getting into factory reset / download mode?
Also I check that the vol rocker is working. when it is on but screen is off, if i click the vol rocker either way it wakes the screen.
Click to expand...
Click to collapse
971 hardware encryption it? Are you sure there is no equipment to unlock BL

Solitarily said:
971 hardware encryption it? Are you sure there is no equipment to unlock BL
Click to expand...
Click to collapse
Android has SD card encryption disabled by default - but if it was enabled it shouldnt disable recovery/fastboot - right?
Even if the bootloader is locked, i should still be able to get into fastboot/download mode, and/or recovery, right?

burnski said:
Android has SD card encryption disabled by default - but if it was enabled it shouldnt disable recovery/fastboot - right?
Even if the bootloader is locked, i should still be able to get into fastboot/download mode, and/or recovery, right?
Click to expand...
Click to collapse
Even SD encryption is enabled, it will not affect enter fastboot mode / download mode

Solitarily said:
Even SD encryption is enabled, it will not affect enter fastboot mode / download mode
Click to expand...
Click to collapse
That's what i figured, but i didn't know if there is some quirk with this device i wasn't aware of.
Is it possible i have a corrupt boot loader? Again this device I'd completely stock.

anyone?

[Q] Can't boot to recovery

I have a F400K G3 (Korean Olleh). It's rooted and bumped. I flashed the bumped TWRP image via Flashify and rebooted recovery via Flashify. It works. But when I try boot to recovery from a complete shutdown. It just boots into safe mode. I did exactly what was stated in the Bump thread (Power+V. Down, when logo appears, release then press again quickly) and also tried substituting V. Down button with V. Up, but it still wont boot to recovery. It just keeps going into safe mode. The video provided in the thread was using an AT&T model so maybe it differs from every variant. I want to know if I'm doing something wrong or the instructions are wrong.
Thank you.

You tried without releasing? Just keep holding buttons
---------- Post added at 11:38 AM ---------- Previous post was at 11:37 AM ----------
Do you get to that factory reset screen?

DelBoy said:
You tried without releasing? Just keep holding buttons
---------- Post added at 11:38 AM ---------- Previous post was at 11:37 AM ----------
Do you get to that factory reset screen?
Click to expand...
Click to collapse
I have tried it as well without releasing. Does the same thing. And it never shows the reset screen. It just goes directly to the boot animation. Rebooting from Flashify also doesn't show the reset screen but it does get to TWRP. But I need to boot it from complete shutdown because I'm gonna test a Flashable zip ROM without root so rebooting using Flashify would be impossible.

Bump.
Seriously. Anyone?

I am subscribing because I have the exact same problem. I have tried every key combination I could find for the G2 and G3 but no luck...

This is exactly the kind of problems you get when using stuff like Flashify. The holding of the buttons etc you mentioned should work. Are you sure you aren't connected using a micro usb?

sprremix said:
This is exactly the kind of problems you get when using stuff like Flashify. The holding of the buttons etc you mentioned should work. Are you sure you aren't connected using a micro usb?
Click to expand...
Click to collapse
No, I am not connected to USB. If I reflash the recovery using ADB will it work? But I do have some worries because I'm using KitKat bootloader on a Lollipop Stock-based ROM (here) and I think I may get some errors.
It's not very important right now because I have root now and can reboot to recovery using Flashify.

I think all korean models cant enter recovery via hardware keys, mine is F400L and have the same problem.

Untouched LG G3
I have a completely untouched LG G3 uk version only official software no root etc and mine won't go into hard reset mode. I have tried 3 or 4 times it always goes into safe mode

same issue
f400k.
able to boot into recovery by softwares
but unable with hard keys.
last night was installing bliss pop. but stuck on boot animation. now wont go to recovery watsoever.
help.

rhtash said:
f400k.
able to boot into recovery by softwares
but unable with hard keys.
last night was installing bliss pop. but stuck on boot animation. now wont go to recovery watsoever.
help.
Click to expand...
Click to collapse
Turn off the phone completely. Press and hold Power and Volume Down. When the LG logo appears, release. After a split second, press volume down and volume up. White screen asking you to reset will appear. Press Yes two times using Volume buttons.

UP!!!
Any remedies? I justed from stock to cm12 LG g3 F400L..
Cant go to recovery mode. Cant flash anything..

Same prob,always going to safemode.f400k rooted,cloudy2.5

i've Lg g3 F4ooL and using Resrruction remic 5.5.5
I stuck in a Bootloop and my device is also not booting into Recovery or safe Mode.
Lg flash Tool is also not Connecting to my device in Downloadmode.
I think There is NO solution At ALl

Has anyone solved this issue?

to get in recovery on F460s, worked on mine, Press Vol-up + Power, as the logo appears release the keys and press Vol-up + Vol-down, you will boot into recovery.

I have the same issue, cant go into recovery using hard buttons on F400K. Any one able to succeed in this?

Same issue on LG G3 F460S, no combination of power + volume buttons + releasing them and pressing again when LG logo appears works. The device go straight into booting system and gets stuck. Is there any other method - maybe short-circuit some pins on the motherboard, to boot into recovery or do a system reset? Please...

OK, turns out that the combination is different for Korean models of G3, as misbah711 wrote, volume UP + power, when logo appears, release and press both volume UP + volume DOWN. If that does not work, try again, but release only the POWER button and press immediately volume DOWN (while volume UP was held all the time). Also, I first tried it without the back cover, as I have to remove battery to turn it off, did not work. Then with the cover it did, not sure if it's an important detail or not.
However it's not the end of the story for me. An image with Korean text appears, and nothing. No combination of power and volume buttons pressing does anything. I'm attaching the image. Also tried a web service to do Korean OCR and then used Google Translate - does not make any sense. Could anyone advise how to proceed and do a factory reset on this device? It won't boot into the system (gets stuck), no adb or any other communication with it.
Edit:
Turns out that when the Korean text appears and I connect USB cable to my PC, adb works correctly. Typed:
adb reboot recovery
The phone rebooted into recovery and now I'm doing a factory reset on it. Looks like all will be fine.

i have d851 on stock kitkat. I flashed TWRP and Philz but no way i can get into recovery mode. it always goes to fastboot mode no matter how I reboot into recovery. Now i am looking for stock recovery image. or a way to fix the twrp/philz. ROM boots just fine.

Have I just bricked my faithful A70?

So I tried to install TWRP and followed the steps, used ODIN v3.14, it tried to upload something but failed with an error.
Now the phone has gone into a perpetual restart cycle:
1) Reboot (by itself or Vol Down + Power)
2) Blank screen with: "Galaxy A70 - Secured by Knox - Powered by Android"
3) Screen with: "This phone's bootloader is unlocked and its software integrity... - Press power key to continue"
4) Blank screen with: "Galaxy A70 - Secured by Knox - Powered by Android"
5) Blank screen with: "SAMSUNG" for a very long time
6) eventually back to step 1
****************
Is there a way to get back this phone?

I was flashed twrp normally and nothing happened for me. Did you pressed vol up+power ASAP after flash successful ? If not, go to download mode and flash again, then press vol up+power immediately.

I never managed to flash TWRP, ODIN displayed an error when I tried.

1. Your using the wrong version of odin. You need 3.13.3
2. Sounds like your not key comboing fast enough?
3. You can not hard brick the A70. If its in a boot loop, plug into pc and Continue to hold vol up and down till it boots to download mode. Flash latest stock version then reboot.
[CLOSED] Delete
Mod edit: Thread closed as the threadowner removed the content of the opening post! Oswald Boelcke, Senior Moderator Delete
forum.xda-developers.com

Zilliman said:
I never managed to flash TWRP, ODIN displayed an error when I tried.
Click to expand...
Click to collapse
Did you boot to Android, check oem in dev options then power off and then enter download mode? Using odin 3.13.3?

Jinetty21 said:
I was flashed twrp normally and nothing happened for me. Did you pressed vol up+power ASAP after flash successful ? If not, go to download mode and flash again, then press vol up+power immediately.
Click to expand...
Click to collapse
Dont press power during the end process, its power and vol down till screen goes blank then immediately let go and press and hold just vol up.

OK, I am now in the "Downloading..." screen and the phone is waiting.
All I have on my PC is:
recovery.tar
twrp-3.6.1_9-0-a70q.img.tar
DFE.zip
I do not have the Samsung firmware or anything else.
What should I do now?

Zilliman said:
OK, I am now in the "Downloading..." screen and the phone is waiting.
All I have on my PC is:
recovery.tar
twrp-3.6.1_9-0-a70q.img.tar
DFE.zip
I do not have the Samsung firmware or anything else.
What should I do now?
Click to expand...
Click to collapse
Get the original firmware for your phone from a 3rd party website.

Zilliman said:
OK, I am now in the "Downloading..." screen and the phone is waiting.
All I have on my PC is:
recovery.tar
twrp-3.6.1_9-0-a70q.img.tar
DFE.zip
I do not have the Samsung firmware or anything else.
What should I do now?
Click to expand...
Click to collapse
Get frija from the link in my guide under tools, install it on your pc, then use it to download your latest stock firmware. Make sure you have odin 3.13.3 as well
In frija, enter the model number and the region code of the A70
In my case it would be SM-A705MN/ TTT
Do NOT flash other models, it must be for your Model. Also, dont flash csc_home in this instance, use csc. When loading the AP file, it will take a little bit to load in and you may see odin has stopped working, ignore that and it will eventually load, make sure auto reboot is unchecked everytime you use odin. The first step in my guide says to download and flash latest stock firmware. Anytime your going to do modifications to a device, make sure to have the latest stock firmware first.

Many thanks for suggestions.
I managed to download the stock firmware from https://www.sammobile.com/samsung/galaxy-a70/firmware/SM-A705FN/BTU/#SM-A705FN and have uploaded it using ODIN 3.14 The phone has now started, like new / factory reset.
I am now setting it up (Samsung firmware) just to make sure I have got my phone back.
After I will try to zap and upload another ROM.

MarvinMod said:
Dont press power during the end process, its power and vol down till screen goes blank then immediately let go and press and hold just vol up.
Click to expand...
Click to collapse
I didn't said that hold power button during flash. Press vol up+power after successful flash, that means when odin say pass then phone goes black and boots, while bootsplash is coming, immediately press and hold vol up+power to switch to recovery.

Jinetty21 said:
I didn't said that hold power button during flash. Press vol up+power after successful flash, that means when odin say pass then phone goes black and boots, while bootsplash is coming, immediately press and hold vol up+power to switch to recovery.
Click to expand...
Click to collapse
Its not up+power after successful flash.
Its down+power till screen goes blank then immediately hold vol up only. Is what im trying to tell you. It will NOT work the way you described.

Zilliman said:
Many thanks for suggestions.
I managed to download the stock firmware from https://www.sammobile.com/samsung/galaxy-a70/firmware/SM-A705FN/BTU/#SM-A705FN and have uploaded it using ODIN 3.14 The phone has now started, like new / factory reset.
I am now setting it up (Samsung firmware) just to make sure I have got my phone back.
After I will try to zap and upload another ROM.
Click to expand...
Click to collapse
Glad you got her going. Thought you said you had a GM not an FN but if its working

MarvinMod said:
Its not up+power after successful flash.
Its down+power till screen goes blank then immediately hold vol up only. Is what im trying to tell you. It will NOT work the way you described.
Click to expand...
Click to collapse
It's not necessary, i can go up to recovery with what i'm saying. What do you mean by vol down+power ? That doesn't do anything. BTW I have FN model.

Jinetty21 said:
It's not necessary, i can go up to recovery with what i'm saying. What do you mean by vol down+power ? That doesn't do anything. BTW I have FN model.
Click to expand...
Click to collapse
In download mode, Android 11, to exit, it litterly tells you on the screen to hold vol down and power to reboot. Vol up and power does nothing in this state. To get to twrp from download mode, hold vol down and power till screen goes blank and then press and hold vol up. This will boot to twrp. Other ways to boot to twrp is power off device, plug into pc, wait for it to charge, then hild vol up and power till it boots or if magisk is installed, use magisk reboot options.
Dude, your key combos and information is incorrect. You can not reboot to twrp from download mode by holding vol up and power.

Samsung changed the keymap combination to boot into recovery on 3.1, so to boot into recovery stock or whatever it is, just follow the steps:
Connect your cellphone to the USB port.
Press on Volume UP during boot.
Samsung does weird things

haky 86 said:
Samsung changed the keymap combination to boot into recovery on 3.1, so to boot into recovery stock or whatever it is, just follow the steps:
Connect your cellphone to the USB port.
Press on Volume UP during boot.
Samsung does weird things
Click to expand...
Click to collapse
Yes, that's.what i'm saying. I'm using September Update's bootloader to get rid of this weirdness lol

MarvinMod said:
Dude, your key combos and information is incorrect. You can not reboot to twrp from download mode by holding vol up and power.
Click to expand...
Click to collapse
My key combo is true, actually the wrong one is yours This is the valid way also on the latest bootloader but like haky86 said, on latest bootloader Samsung wants you to plug USB cable to do this.

So we are agreed, there is no way to get to TWRP unless you are connected to USB? For example, on my one old phone, I used to keep TWRP backups on the SD card, and I could restore anywhere, I did not need to be near the PC with a USB cable.

Zilliman said:
So we are agreed, there is no way to get to TWRP unless you are connected to USB? For example, on my one old phone, I used to keep TWRP backups on the SD card, and I could restore anywhere, I did not need to be near the PC with a USB cable.
Click to expand...
Click to collapse
there's a fix in the telegram group, I don't remember which was because I left all cringy groups.